Unable To Connect With Server?

Mar 5, 2013

connected to internet but not able to open the websites and also not able to ping client computer with server.

View 1 Replies


ADVERTISEMENT

Chrome And IE Can't Connect To Internet - Unable To Connect To The Proxy Server

Jun 8, 2011

Few days ago I started to get the following error message while trying to connect to the internet using Chrome and IE:"Unable to connect to the proxy server..."I don't have a proxy server configured - nothing is checked in the LAN settings page.In Firefox I don't have that problem - it seems it gets the proxy configuration from elsewhere.

View 3 Replies View Related

Switched ISP Now Unable To Connect To Server

Aug 29, 2012

They came and installed a router and disconnected my old one. I then connected my new ISP router to my switch and now Im just stuck. At one point I was able to connect to my drives but was unable to connect to the internet. But once I call the ISP they had me change setting for Ipv4 changed defualt gateway, Ip address and DNS after that I was unable to reconnect to my drives. I've done full shut downs and restarts and nothing has worked. 1 of the computers connects to the server through wifi. I also run a VPN.

View 2 Replies View Related

Cisco :: LMS 3.1 Unable To Connect To ANI Server

Nov 23, 2008

I'm running LMS 3.1 with CM 5.1.0 on a single Solaris 9 server. I've been unable to open topology services. I get an error "cannot connect to ANI server". I've confirmed that the ANIServer6.0 is running (it says "Running with busy flag set"). I've also tried restarting the Daemon Manager. What should I look at? Could it be a Java problem?

View 16 Replies View Related

Online Games Unable To Connect With Server

Aug 17, 2012

Online games unable to connect to game server in Vista. Turned off firewalls, what are settings to allow.

View 1 Replies View Related

Unable To Connect To DNS Server / Browse Internet

Jan 4, 2012

[code]...

Unable to connect to DNS server/browse internet

View 8 Replies View Related

Ubuntu Server / Unable To Connect To Network?

Apr 12, 2011

We are having a network of 7 computers and a server (Ubuntu server). The problem is, two of them are not connecting to the network. When i check the network card of these two systems, it seems working (the green light is blinking). When i replace these systems with a laptop, it connecting to the network and there is not problem at all.

View 4 Replies View Related

Unable To Connect To Internet - Cannot Communicate With DNS Server?

Jul 16, 2011

Unable to connect to the internet. I am able to connect to my router which is virgin media but cannot connect to the internet. I get a message saying cannot communicate with primary DNS server (194.169.4.100)

View 11 Replies View Related

D-Link DIR-655 :: Unable To Connect To Game Server

May 13, 2011

i cant connect to most of my friends through xbox and computer, i also cant connect to some games servers. it also says that i have a nat strict. i don't care if my router has no security. i just want my internet to be fast and i can connect to people.

View 1 Replies View Related

Cisco :: C1841 - Unable To Connect DNS Server

Feb 21, 2013

I have a cisco 1841 router and a cisco 2900xl switch. I am trying to get my ACL's to work, but when ever I do an extened acl and let certain one in (80,443,21,etc) my computer gets an internet error saying it cannot conntact the dns server. I've tried severl ways to fix it, but cannot seem to get it to work.
 
Right now i just have access-list 1 on. Eventually I would like to have only "Apple" and 101 on.
 
Current configuration : 2050 bytes
!
version 15.1
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption(code)

View 1 Replies View Related

No Internet Access - Unable To Connect To DHCP Server

Aug 10, 2012

I can connect to the network but doesn't connect to the internet. I have tried a lot of ipconfig cmd's /renew said "unable to connect to dhcp server" and others didnt work all out of ideas.

View 14 Replies View Related

Unable To Connect Workstation To Network Server On Domain?

Nov 1, 2011

Work station of domain network stopped accessing the server and internet. Assigned IP address, since DHCP would not hand out automatic IP address. Was working fine before today.

View 1 Replies View Related

D-Link DIR-825 :: Unable To Connect Through External IP Back Into Server On Applications?

Aug 7, 2011

Just updated to the 1.01 firmware on my DIR-815 and now it doesn't handle loopbacks anymore.

For instance, I have a dyndns address of ericnewton76.dyndns.org.  This points to my router.  Works fine if you're NOT within the router's internal network, ie, outside hosts can get in just fine (try it... http://  , you'll see an IIS7 welcome screen)

However, when INSIDE the network, the requests don't get connected properly, and they used to... ie, I work with code, so my svn repo is at ericnewton76.dyndns.org/svn but inside my network it doesn't connect properly anymore (whereas it used to before firmware update)

So now I wish I could back-peddle to 1.0 firmware.

View 6 Replies View Related

Cisco Firewall :: Unable To Connect To Outside PPTP VPN Server (ASA 5550)

Apr 26, 2011

we are not able to connect to a outside PPTP vpn server;The scenario is this :Connections are started from inside netwok to a VPN server on the outside zone.
 
I have add  these configs and still not working.policy-map global_policy class inspection_defaultinspect pptp ?i also have a acess-list for it.access-list inside_access_in extended permit tcp object inside-network any eq pptp access-list inside_access_in extended permit gre object inside-network any access-group inside_access_in in interface inside? I am missing something or this is all configs i have to get done ?

View 5 Replies View Related

TP-Link 300Mbps Wireless :: TL-WR1043ND - Unable To Connect Printer Server

Mar 22, 2013

Region : Argentina
Model : TL-WR1043ND
Hardware Version : V1
Firmware Version : latest
ISP : telecentro

I recently purchased a tl-wr842nd, my printer is a hp laserjet 1020 and it is in the compatible list as I seen. The problem is that I connect the printer in the usb routers port and the led do not light up, I tried putting my pendrive to see if the usb routers port wasn't working but it does since the pendrive is accepted and online and the usb led lights.I downloaded and installed the latest firmware but there's no change, I did everything like it saids in the faq 415 where it explains how to install and use printer server with no luck.

View 1 Replies View Related

Cisco Wireless :: RV220W / Unable To Connect To Exchange Server With IPhone

Aug 21, 2011

I just recently installed a RV220W at my office and (almost) everything works fine. I have noticed that when my iPhone is connected to the RV220 wi-fi network, I get the message "The connection to the server failed" when checking my email. If I disable the wireless on my iPhone, it connects up to the exchange server perfectly fine so it must be a setting with the wireless somewhere but I cannot find it anywhere.....

View 1 Replies View Related

Linksys Wireless Router :: EA6500 Unable To Select Folder Access / FTP Server / Media Server

Dec 9, 2012

I purchased the EA6500 a few days ago, and when I'm connected to Cisco Connect Cloud I am unable to select Folder Access / FTP Server / Media Server.  I click them and nothing happens.Also, the Cisco light on the router keeps blinking.

View 5 Replies View Related

Can't Connect To Server 2008 Via Server Manager On Windows 7

Feb 11, 2011

I have install the administration toolpack on Windows 7 and enabled remote connections on my server 2008 box, When i try and connect with my Windows 7 server manager it does not work.I see stuff on google about enabling a trustedhost with winrm but can't find a way to do this.

View 18 Replies View Related

Server Is Unable To Set An Ip

Feb 8, 2011

I configed a VPN server with incoming connection. client connected to server succesfully.but sever and client havent any data send or receive. the server dont set an ip for client. this is connection properties:

as you see there is no data sending or dara receiving...

View 2 Replies View Related

Want To Connect Server With Windows Server 2003

Aug 28, 2012

After getting New Workstations, I wanted to connect that to the SERVER but Windows 7 could not log into domain of our server with Windows Server 2003. Besides following the proper process/steps. I am able to use the printer and internet shared through SERVER though.

View 2 Replies View Related

Cisco WAN :: 881 Unable To NAT To Web Server

Jun 20, 2011

Apparently the problem seems simple enough however I couldn't get it working. My router is being configured to access a web server in the network which is on port 80. However, port 80 is being used by my router's setup page. Therefore whenever I key in my public IP address, it will just immediately direct me to the router's page.I have also tried opening up other ports like 5050 and set my web server to port 5050. Internally within the LAN itself everyone can access the web server with port 5050. However, going from public IP address with port 5050 doesn't work.

View 44 Replies View Related

Unable To Contact To DHCP Server?

Nov 2, 2011

I've been trying (in vain) to connect a USB Wireless device to be able to use it off my wireless network. I have (2) other laptops and (1) other desktop connecting to the router with no issues. For some reason, this old desktop keeps installing an Ethernet device (probably on the MB) and is automatically Configuring the IP address to that instead of the USB wireless device.I've tried uninstalling the Ethernet device but it comes right back after I do a reboot. Even when I disable it, I still can not connect with my Wireless device.

View 14 Replies View Related

Unable To Set Up The Server And Open Up The Port?

Dec 18, 2012

I've been trying to open ports to start a server on some games that I play.I used a guide that shows you how to set up the server and open up the port, but I can't get it to work.I've tried making an exception in my firewall,but that didn't work, so I tried completely disabling my firewalls. Nothing. I've gone into my router settings and opening a port this way: But it still doesn't open it up. This is what I'm using to check it.In fact, NONE of the ports are open it seems? No matter what port I try to type in on the port checker, it always gives me that same error.

-Both?
-Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.

C:Usersack>ipconfig /all

Windows IP Configuration

Host Name . . . . . . . . . . . . : FellowShip[code]....

Who is your Internet Service Provider (ISP)?

-Comcast

What type of Broadband connection are you using?

-Cable

What is the exact Make and Model of your Modem, Router or Modem/Router Combo?

-Router is WNR2000v3, Modem is SMCD3GNV (One I'm renting from Comcast)

What is the Name of the Anti-Virus, Security or Firewall Software installed from the problematic computer?

-Avast! Antivirus and Default Windows Firewall

View 12 Replies View Related

Error - Unable To Register To SIP Server

Dec 26, 2012

I am using PC to mobile dialer. It was working fine but now I am unable to login to my wowcall account due to error - Unable to register to SIP server.

View 1 Replies View Related

Unable To Resolve Server's DNS Error

Apr 23, 2012

My laptop is connected to a router via wifi but it keeps getting a DNS fault. I have another PC linked to the same router via WiFi and that works perfectly all the time. I have the same problem on both google chrome and IE browsers where I just get the message telling me that the DNS look up failed. My internet is still connected as I can dial into my remote CCTV cameras and I can ping website ip addresses. Most times I can just turn off my wireless adapter and turn it back on and it works for another hour or so. But sometimes it wont work all day, unless I start my laptop in safe mode, when it works everytime! I have flushed the DNS cache several times but to no avail.

View 5 Replies View Related

Unable To Send Files To FTP Server

Aug 14, 2012

I have a server with two adapters: 192.168.1.200 and 10.99.1.200, 10.99.1.200 connects to a cisco router 10.99.1.254 (which I have no access to). This connects via WAN to another network to transfer files to another company. 192.168.1.200 is connected to our local LAN. I have a service that uses FTP to get and send files to a server through 10.99.1.200. I recently had to switch our IP scheme from 10.99 to 192.168 and since then haven't been able to send files to the ftp server. My question is, would a router solve my problem? If so, would I; remove the 10.99 adapter, connect 192.168 to the router, connect the router to the switch, connect the 10.99 gateway to the new router (and update any appropriate routing tables on the server)? The service appears to have issues with using a dual homed server and updating it isn't going to happen anytime soon.

View 3 Replies View Related

Unable To Share Internet From Server

Nov 21, 2011

I'm using a hotspot and domain network. I have a problem with my server, or might be in my network configuration. The internet connection has stopped working in the connected computers and WI-FI connection.

View 1 Replies View Related

Unable To Link PC To Server On Another Part Of Network

May 26, 2011

I am having linking a computer to our SBS server. The computer in question is set in a warehouse on our site. We have a leased internet connection which is used on a number of different offices. The sbs-server has an IP address of 192.168.50.254 with a gateway Ip address of 192.168.50.1. The firewall on this network has an external IP of 10.50.0.37 with a gateway of 10.50.0.254 and this links to the leased line equipment. The external IP address for this network is 62.7.70.237. The PC in the warehouse has an IP address of 192.168.0.2 attached via a router to the leased line. The routers Ip address is 192.168.0.1, the external IP address is 10.50.0.55 and a gateway of 10.50.0.254. This links to the leased line and seems to have an external Ip address of 62.7.70.238. My issue is that I want the PC in the warehouse to be able to connect in some way to the SBS-Server. I cannot seem to access it via the external IP or the gateway (10.50.0.37).

View 2 Replies View Related

Unable To Access Shared Drives On NAS Server?

May 24, 2012

I hav a Network area storage server where all my files are stored. The Folders are shared on the network the shared folders were working fine but suddenly i was unable to access these folders .I tried to Map the network drives by IP address that is ""\ipaddressshare""of the NAS server but was unable to do so. It Gave me an error message ""No Logon Servers are currently available"" . But when i put my server Name that is ""\servernameshare "" i am able to map the folders. Why am i unable to access my shared folders on the NAS server by IP address . I have checked the IP adress connectivity and everything but it is all fine .I can even ping by ip address of the NAS serve

View 5 Replies View Related

DNS Server Can't Be Resolved - Unable To Visit Many Sites

May 9, 2011

Lately I have been experiencing an annoying issue with my connection. My signal strength is excellent, but every 5-10 minutes I have the problem that the DNS server can't be resolved, so I can't visit any websites. All I can do is wait, the problem disappears after a few minutes. I tried ipconfig /flushdns but that didn't work.

View 5 Replies View Related

Unable To Load Webpage Because Server Sent No Data

Apr 4, 2012

I did nothing different to my computer. It was online fine and then an hour later when I came back, it wouldn't load any pages. I have a DSL modem and a wireless router that also connects another family member's desktop to the Internet. (As well as our phones via wifi.). The connection is fine on the other PC through a wireless adapter (both are desktops), and on the wifi the phones work perfectly so I know the modem and router aren't the problem. But even though my desktop says it's connected (not wirelessly, it directly connects to the router.), no pages will load. If I use chrome browser it eventually tells me this webpage is not available regardless of which page I try to load, or sometimes it's telling me no data received - unable to load the webpage because the server sent no data. Yet oddly a couple of times after forever it seemed to half load a couple pages. Internet Explorer just keeps trying to load pages forever with blank white page as a result.

View 10 Replies View Related

Computer Is Unable To Contact DHCP Server

Feb 10, 2012

need to know why I can not connect to the internet after I am done downloading windows Xp on my Desk top. I got an error message from the cmd, saying that computer is unable to contact DHCP server.

View 1 Replies View Related

Error 105 - Unable To Resolve Server DNS Address?

Jan 15, 2012

I have been trying to connect to the Internet via a wireless connection but keep receiving the above error. None of the Windows solutions resolve the problem. On Google Chrome I see a screen saying 'This web page is not available', and receive 'Error 105: Unable to resolve the server's DNS address'. I cannot access Internet Explorer either.The strange this is that this problem only seems to occur with some wireless networks, as I can connect fine at home. In certain places, however, I am told that I am connected but that accss is 'Local Only', and I cannot open any browsers. I need the problem resolved as soon as possible as I cannot access the internet where I need it most.

View -1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved