Switched ISP Now Unable To Connect To Server
Aug 29, 2012
They came and installed a router and disconnected my old one. I then connected my new ISP router to my switch and now Im just stuck. At one point I was able to connect to my drives but was unable to connect to the internet. But once I call the ISP they had me change setting for Ipv4 changed defualt gateway, Ip address and DNS after that I was unable to reconnect to my drives. I've done full shut downs and restarts and nothing has worked. 1 of the computers connects to the server through wifi. I also run a VPN.
View 2 Replies
ADVERTISEMENT
Aug 17, 2012
I have a HTPC that I use to feed two XBOX extenders (all are hardwired, through a switch). I was using the onboard Realtek NIC, but having some stuttering issues for live and recorded TV feeds. I installed a new Intel NIC, but cannot get the Xboxs to connect back using that connection. Everything else is working (Internet, NAS drives, etc) with that card, only the Xbox extenders. I did delete the original connection and tried adding back as new, but have since had to revert back to the original NIC.
View 4 Replies
View Related
Jun 8, 2011
Few days ago I started to get the following error message while trying to connect to the internet using Chrome and IE:"Unable to connect to the proxy server..."I don't have a proxy server configured - nothing is checked in the LAN settings page.In Firefox I don't have that problem - it seems it gets the proxy configuration from elsewhere.
View 3 Replies
View Related
Mar 5, 2013
connected to internet but not able to open the websites and also not able to ping client computer with server.
View 1 Replies
View Related
Nov 23, 2008
I'm running LMS 3.1 with CM 5.1.0 on a single Solaris 9 server. I've been unable to open topology services. I get an error "cannot connect to ANI server". I've confirmed that the ANIServer6.0 is running (it says "Running with busy flag set"). I've also tried restarting the Daemon Manager. What should I look at? Could it be a Java problem?
View 16 Replies
View Related
Aug 17, 2012
Online games unable to connect to game server in Vista. Turned off firewalls, what are settings to allow.
View 1 Replies
View Related
Jan 4, 2012
[code]...
Unable to connect to DNS server/browse internet
View 8 Replies
View Related
Apr 12, 2011
We are having a network of 7 computers and a server (Ubuntu server). The problem is, two of them are not connecting to the network. When i check the network card of these two systems, it seems working (the green light is blinking). When i replace these systems with a laptop, it connecting to the network and there is not problem at all.
View 4 Replies
View Related
Jul 16, 2011
Unable to connect to the internet. I am able to connect to my router which is virgin media but cannot connect to the internet. I get a message saying cannot communicate with primary DNS server (194.169.4.100)
View 11 Replies
View Related
May 13, 2011
i cant connect to most of my friends through xbox and computer, i also cant connect to some games servers. it also says that i have a nat strict. i don't care if my router has no security. i just want my internet to be fast and i can connect to people.
View 1 Replies
View Related
Feb 21, 2013
I have a cisco 1841 router and a cisco 2900xl switch. I am trying to get my ACL's to work, but when ever I do an extened acl and let certain one in (80,443,21,etc) my computer gets an internet error saying it cannot conntact the dns server. I've tried severl ways to fix it, but cannot seem to get it to work.
Right now i just have access-list 1 on. Eventually I would like to have only "Apple" and 101 on.
Current configuration : 2050 bytes
!
version 15.1
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption(code)
View 1 Replies
View Related
Aug 10, 2012
I can connect to the network but doesn't connect to the internet. I have tried a lot of ipconfig cmd's /renew said "unable to connect to dhcp server" and others didnt work all out of ideas.
View 14 Replies
View Related
Nov 1, 2011
Work station of domain network stopped accessing the server and internet. Assigned IP address, since DHCP would not hand out automatic IP address. Was working fine before today.
View 1 Replies
View Related
Aug 7, 2011
Just updated to the 1.01 firmware on my DIR-815 and now it doesn't handle loopbacks anymore.
For instance, I have a dyndns address of ericnewton76.dyndns.org. This points to my router. Works fine if you're NOT within the router's internal network, ie, outside hosts can get in just fine (try it... http:// , you'll see an IIS7 welcome screen)
However, when INSIDE the network, the requests don't get connected properly, and they used to... ie, I work with code, so my svn repo is at ericnewton76.dyndns.org/svn but inside my network it doesn't connect properly anymore (whereas it used to before firmware update)
So now I wish I could back-peddle to 1.0 firmware.
View 6 Replies
View Related
Apr 26, 2011
we are not able to connect to a outside PPTP vpn server;The scenario is this :Connections are started from inside netwok to a VPN server on the outside zone.
I have add these configs and still not working.policy-map global_policy class inspection_defaultinspect pptp ?i also have a acess-list for it.access-list inside_access_in extended permit tcp object inside-network any eq pptp access-list inside_access_in extended permit gre object inside-network any access-group inside_access_in in interface inside? I am missing something or this is all configs i have to get done ?
View 5 Replies
View Related
Mar 22, 2013
Region : Argentina
Model : TL-WR1043ND
Hardware Version : V1
Firmware Version : latest
ISP : telecentro
I recently purchased a tl-wr842nd, my printer is a hp laserjet 1020 and it is in the compatible list as I seen. The problem is that I connect the printer in the usb routers port and the led do not light up, I tried putting my pendrive to see if the usb routers port wasn't working but it does since the pendrive is accepted and online and the usb led lights.I downloaded and installed the latest firmware but there's no change, I did everything like it saids in the faq 415 where it explains how to install and use printer server with no luck.
View 1 Replies
View Related
Aug 21, 2011
I just recently installed a RV220W at my office and (almost) everything works fine. I have noticed that when my iPhone is connected to the RV220 wi-fi network, I get the message "The connection to the server failed" when checking my email. If I disable the wireless on my iPhone, it connects up to the exchange server perfectly fine so it must be a setting with the wireless somewhere but I cannot find it anywhere.....
View 1 Replies
View Related
Dec 9, 2012
I purchased the EA6500 a few days ago, and when I'm connected to Cisco Connect Cloud I am unable to select Folder Access / FTP Server / Media Server. I click them and nothing happens.Also, the Cisco light on the router keeps blinking.
View 5 Replies
View Related
Feb 11, 2013
One router is in a different bedroom to mine which my uses to connect to the internet. When this router is switched off,would it be possible to just have a second router in my room which I switch on and continue to use the net?
View 4 Replies
View Related
Feb 28, 2011
I just switched to TWC from AT&T and one of my computers running Vista, via wireless, cannot open any inet sites. The browser appears to do its DNS thing, but it sits WAITING for the site then says it can't connect. I have 3 other computers, Vista and W7, and an Xbox that connect OK. IPCONFIG shows valid IP addresses, DNS and gateway. Firewall/AV is off. It connects fine via wire. AND it connects with no security on the router. The router is a Cisco E3000. The laptop is an HP.
View 7 Replies
View Related
Oct 1, 2011
I have a laptop network card (model 4965AGN) that came from a Gateway laptop. Will this same card work on a Dell laptop that uses the same model? Or will certain frimware that was created specifically for gateway not work with the Dell?
View 3 Replies
View Related
Feb 16, 2012
i must admit that i have very little experience in networking and i have just started cisco CCENT.i have a problem with setting up a small switched network i have a cisco 2960 layer 2 switch,2 workstations 2 straight through(patch)cables.I have connected the above setup but still i cant verify network connectivity by using ping command, the problem is assigning ip addresses and configuring interface internet connections
View 3 Replies
View Related
Mar 22, 2011
is it possible to use a wireless router for making a wifi setup by connecting the router only to the broadband modem while the pc is kept switched off.if so which is the best bang for buck wireless router available now?
View 3 Replies
View Related
Apr 1, 2011
he switch our internet and phone connection, our phone is now with vonage and internet to uBEE. SO ever since then our connection on the computer has been supper sloww. i am unable to play my games such as Crossfire this fps game. everytime i play it keeps telling me failed to connect to server. Then i sent a Support ticket and they told me to take this speed test.
View 5 Replies
View Related
May 30, 2012
So I recently had to get Comca$t xfinity cable internet due to Verizon Fios not being available in my new home.With Fios on my laptop, I didn't lose connection at all in 3 years.With Comca$t, I lose my wifi connection just about every other minute.It just keeps disconnecting and reconnecting.I'm running Vista.My Ipad is connected just fine and doesn't drop connection.This makes me think it has something to do with my laptop. They are the same distance from the wireless gateway.
View 11 Replies
View Related
Nov 30, 2011
I have Dell Vostro 1015. It came with Window XP SP3 back in Oct 2009 (It was in free DOS Mode). In October this year, I installed Window 7 Home Premuim 32-bit SP1. Bluetooth was working fine until I updated the drivers for Windows 7 from Dell website. Upon installing the latest bluetooth driver, it won't get switced on even after pressing Fn+F11. When I tried to reinstall it pops out "Switch on Bluetooth" message several times, but as usual fails to switch on.
View 1 Replies
View Related
Jan 22, 2012
This happened after I put on an ubuntu version called ICE. Now, if I load eg puppy linux the wireless adapter is invisible. I reinstalled Visa and it saw the wlan adapter but doesn't auto recognise now so I have to switch on manually. Can I put in a new adapter with 'n' capability?
View 2 Replies
View Related
Jan 1, 2011
I recently got a new router, from BT, and replaced a switch with a cisco one. (which I don't think is the problem, as I have tested without the switch and it still times out) I only ever really notice it when im browsing on the web on any site. I use a wired connections I have not noticed this on any other machine how ever the timeouts are random and streaming/downloading seems to work fine.
View 7 Replies
View Related
Dec 31, 2012
i am using dlink DIR-600L wireless router, the problem is i can connect to any device only if my laptop is on, the moment i swtich off my laptop my other devices dont work on wifi
View 2 Replies
View Related
Aug 16, 2012
I am having trouble with a newly configured install. Basically it seems that my centrally switched guest SSID is not functioning. As you change AP groups, which should change the interface associated with the SSID and also the dhcp client address, the client is retaining the original dhcp address from whichever AP group they first associated with.
I also have a locally switch WPA2 SSID at each location which is working fine. Clients are able to change dhcp address correctly as they move between AP groups. It just doesn't seem to be working on the guest network, which is odd because it was working earlier in the install. It has only started having issues yesterday afternoon.
The interface above is assigned to the guest SSID in one of the AP group. I assume this has something to do with it but I've been over my DHCP assignments on the core switch, local switch, controller, and dhcp server and can find no issue with the configuration..
I am not sure why as I am not using DOT1X at all. The guest is a pass-thru and the WPA2 network is just WPA + WPA2 with TKIP and AES. No DOT1X anywhere on the controller...
View 5 Replies
View Related
Apr 17, 2012
My parents switched from comcast to uverse and I'm having problems staying connected to the 2wire router they supplied. my connection disconnects and reconnects making the internet nearly impossible to use
View 3 Replies
View Related
Jun 12, 2012
I know that the ASR 1002 has 4 integrated ports but the problem that I am having is that I need two of those ports to emulate a L2 switched port. Is that doable?
If not than I need to purchase the following module below. Is that price really true?
View 1 Replies
View Related
Nov 25, 2012
I got a retired Zyxel Zywall USG200 from work. Its working just subs ran out. Was thinking of putting it on my home network, any reason not to? I'm a sys admin, not network engineer, so while I'm capable I'm not an ace with this type of equipment.. Which is why I want to mess with it. I'm currently RTFM and it seems pretty straight forward. If it seems like a viable piece of equipment I'd like to use it full time.
How bad can I break the internets and subject myself to the wrath of my wife's downed internet connection =D if I plug it in between modem and the switch?
View 2 Replies
View Related
