I recently got a new router, from BT, and replaced a switch with a cisco one. (which I don't think is the problem, as I have tested without the switch and it still times out) I only ever really notice it when im browsing on the web on any site. I use a wired connections I have not noticed this on any other machine how ever the timeouts are random and streaming/downloading seems to work fine.
View 7 RepliesThe website [URL] started giving me this error : The server at forums.d2jsp.org is taking too long to respond. I am directly connected to my service provider's box (The brand is "Arris"). The issue seems to have started as soon as I uninstalled google chrome (reinstalling doesn't fix it). My last resort with reinstalling windows 7 64bit.
My service provider is Videotron (Quebec, Canada) I can see the front page directly from their IP adress: [URL] but as soon as I hit any link it goes back to the connection time out error.
The tracing route is :
1 7 ms 6 ms 5 ms 10.189.16.1
2 15ms 15ms 15ms 216.113.124.17
3 31ms 31ms 32ms 216113123.174
4 * * * Request timed out.
I've bought a "WAG160N v1.0 Annex A" almost 2 years ago. I never used it's wireless feature untill we moved our house. Now it's like 4 month I'm using its wifi feature and I've got to admit I'm really frustrated by its functionality!
For months the modem just dropped wireless connection constantly in various time periods. Somtimes it went like 2 days without any problem but some other times I had to change channel every 15 minutes for it to get back working. And yes it didn't get fix until I changed the channel, otherwise clients had to wait several hours for a 50/50 chance of reconnection. Now It's two days the changing channel trick no longer works. I tried all channels and even put my notebook next to the modem but no luck. The notebook sometimes connnects to the access point but disconnects after a few seconds. Somtimes it doesnt even detect the SSID of my WAG160N modem. Some friends suggested that the wireless hardware of my modem is broken and no longer works but I'm eager to know if it is broken why is it still broadcasting and sending signal.
I've tried everything from upgrading and downgrading firmware to turning on and off the modem several times and changes modem position. And even tried the G-only 20MHz mode.We are at a very crowdy place. Using inSSIDer I could pick about 15 other access points. Only few of them are using Wireless-N, most of them are using Wireless-G.This is the inSSIDer diagram of my WAG160N modem from a client: [code]
I have an Inspiron 1545 Laptop running Windows 7. Before, i've only had mild connectivity issues, mainly dropping internet for a few seconds, but I've always considered that my router's issue. Latley though, my internet has been slowing down and then dropping for minutes at a time and today I have absolutely no connection. A red X across my "bars." It says i'm connected to my home network when I click the bars, but when I go under Networking it says i'm not connected to any network.
View 5 Replies View RelatedI recently picked up the new N600 Netgear, and installed it without much problem.I've recently been running into a issue while wired in on my desktop.
"Error 7 (net::ERR_TIMED_OUT): The operation timed out." Some pages, randomly, but fairly often will be very unresponsive/time out.
I just recently had my hard drive replaced by the manufacturer of my computer (Lenovo) because it started clicking. When I got it back it started making my wireless router/DSL modem reset all the time. I didn't have this issue before. I'm running Windows 7 Home 64 Bit. While the computer was off being repaired I was using a Win XP machine and had it connected through Ethernet cable. I did not have any issues with the router/modem while the XP machine was connected. I tried connecting the Win 7 computer up through ethernet cable (hard wired) and it still crashes the router/modem. I also connected the XP machine back up (hard wired) to the router and had no problems. Is it possible that the wrong drivers were installed by the lenovo techs? I have also noticed that my touchpad does not work the same as it did before too. And is it possible that my laptop is making the router crash out due to wrong configurations?
View 3 Replies View RelatedAfter a very unsuccessful attempt to talk with technical support, I decided to post here. I probably should have posted here first... lesson learned.I have Comcast Cable internet and get approx 24-25 Mb/s download speed when directly connected to the modem.When I connect via the router's ethernet port, my download speed drops to 14Mb/s.When I connect via wifi -- the download speed drops the whole way to 1.5Mb/s?
View 4 Replies View RelatedOne router is in a different bedroom to mine which my uses to connect to the internet. When this router is switched off,would it be possible to just have a second router in my room which I switch on and continue to use the net?
View 4 Replies View RelatedMy E4200 recently started to randomly shut down. To say the least this is very aggravating. Nothing has changed, location still the same and it seems to be overheating or in the very least getting warm. In the last It will also shut down multiple times a day too. I have done some reading and am beginning to regret this purchase.
View 8 Replies View RelatedI recently bought a e4200v2 router and installed it by connecting it with my old modem d-link 2730u.I was disappointing to see that the new router i.e e4200v2 has the exact same coverage as my old router which is costing about 35 usd and linksys cost about 200 usd.. this is a terrible waste of money!!
View 1 Replies View Relatedis it possible to use a wireless router for making a wifi setup by connecting the router only to the broadband modem while the pc is kept switched off.if so which is the best bang for buck wireless router available now?
View 3 Replies View RelatedMy friend who's using a DSL Modem has been recently expericening rnadom disconnecting from the internet. He did hear it might be due to a trojan virus, but after various virus/spyware/malware and internet scans and tests etc. He still keeps getting disconnected.He's using a Sagem f@st 800 E3 modem and using XP+SP3 OS
P4 3.0 2GB ram PC
I have WRT54G2 router. All settings are more-less default and the behavior is following.You start up the router. If you do not connect wireless device within 10 minutes, then you have to restart the router.You have assigned IP via wifi, and when you connect cable device to the router, the wifi PCs are disconnected.
View 3 Replies View RelatedIt was my first build, and it's saying I have no network adapters. My motherboard's driver disk did not come with network adapter drivers.
View 18 Replies View RelatedCiso 1941 router frozen once a day, sometimes after 2 to 7 days. When the router frozen, no internet connection and cannot login/ping ethernet ports. I can login to console port and copy the error messages below. Reload the router and it will return back to normal operation. Re-installed IOS but still the same.
IOS Version 15.1(2)T2,
Cisco CISCO1941/K9 (revision 1.0) with 487424K/36864K bytes of memory.
DRAM configuration is 64 bits wide with parity disabled.
255K bytes of non-volatile configuration memory.
250880K bytes of ATA System CompactFlash 0 (Read/Write)
[code]...
Every time I connect my router, I can't use the internet browsers. But I can see there's a internet connection. Bu once in a while even with just a modem connected to my computer I can't use the browsers. The signal from the router to my Xbox 360 works but sometimes it says there's DNS Error or IP Address Error causing my Nat to be strict. Once in a while, I can access my router's page when it's connected. [code]
View 19 Replies View Relatedmy internet connection keeps dropping recently. I first thought it was caused by my router, so I bought a new router D-Link DIR 835 but the problem still exists and seems even worse.
View 1 Replies View Relatedmy PS3 has recently lost wireless connection to my network, whenever i try to reconnect i get the following error messages. failed to get ip address, or attempt to obtain ip address timed out.i thought i would try to renew ip addresses but when i try to release ip address , via command line (ipconfig/iprelease) i get the following message. this operation cannot be performed on local area area connection while it has media disconnected.
View 1 Replies View RelatedOriginally I owned an Aztec router which supports a DSL Cable which my internet provider gave us but now that I bought a new router I didn't know that the MR3420 only support WAN cable what should I do? like find a dsl to wan cable (doubt it exist) or ask from my internet provider or return the router?
View 1 Replies View RelatedMy google search has recently stopped working in both IE and firefox. When i search bing or yahoo they work just fine. I have tried using google.com an also tried using the toobar on my computer.
View 6 Replies View RelatedI have AG241v2 LinkSys router. my problem is when I had started to download anything, I found that no internet connection so I couldn't make internet browsing or any other activity. This problem is also occurred when more than one user connect to the internet, the others can't make browsing. I made firmware upgrade but still the problem occurred.
View 6 Replies View RelatedI have e4200 router and i notice sometimes when i am browsing that dops connection.
View 9 Replies View RelatedI just switched to TWC from AT&T and one of my computers running Vista, via wireless, cannot open any inet sites. The browser appears to do its DNS thing, but it sits WAITING for the site then says it can't connect. I have 3 other computers, Vista and W7, and an Xbox that connect OK. IPCONFIG shows valid IP addresses, DNS and gateway. Firewall/AV is off. It connects fine via wire. AND it connects with no security on the router. The router is a Cisco E3000. The laptop is an HP.
View 7 Replies View RelatedI have a laptop network card (model 4965AGN) that came from a Gateway laptop. Will this same card work on a Dell laptop that uses the same model? Or will certain frimware that was created specifically for gateway not work with the Dell?
View 3 Replies View Relatedi must admit that i have very little experience in networking and i have just started cisco CCENT.i have a problem with setting up a small switched network i have a cisco 2960 layer 2 switch,2 workstations 2 straight through(patch)cables.I have connected the above setup but still i cant verify network connectivity by using ping command, the problem is assigning ip addresses and configuring interface internet connections
View 3 Replies View RelatedI am sharign my bandwidth with my neighbour and would like to keep a tab on what he is downloading, and then limit the speeds he gets while using my 4Mbps line. He's accessign using a WIFI L:AN card.Can I do this usign WRT160Nv2? Maybe any third-party.
View 2 Replies View RelatedI have a HTPC that I use to feed two XBOX extenders (all are hardwired, through a switch). I was using the onboard Realtek NIC, but having some stuttering issues for live and recorded TV feeds. I installed a new Intel NIC, but cannot get the Xboxs to connect back using that connection. Everything else is working (Internet, NAS drives, etc) with that card, only the Xbox extenders. I did delete the original connection and tried adding back as new, but have since had to revert back to the original NIC.
View 4 Replies View RelatedThey came and installed a router and disconnected my old one. I then connected my new ISP router to my switch and now Im just stuck. At one point I was able to connect to my drives but was unable to connect to the internet. But once I call the ISP they had me change setting for Ipv4 changed defualt gateway, Ip address and DNS after that I was unable to reconnect to my drives. I've done full shut downs and restarts and nothing has worked. 1 of the computers connects to the server through wifi. I also run a VPN.
View 2 Replies View Relatedhe switch our internet and phone connection, our phone is now with vonage and internet to uBEE. SO ever since then our connection on the computer has been supper sloww. i am unable to play my games such as Crossfire this fps game. everytime i play it keeps telling me failed to connect to server. Then i sent a Support ticket and they told me to take this speed test.
View 5 Replies View RelatedLast week I purchased the E4200 and for simplicity, I configured it with basic settings using Cisco Connect. Today, I went into the web interface. The only thing I did was review settings and get the Routers PIN (it appears that Intel Chipset cards on Windows requires this PIN?) Close the browser (did not save any settings) and now I am completely locked out of the device. Cannot connect does not accept the wireless password. I hard reset the device, ran through the wizard. Everything was working again. Launch the browser and connected to the device closing window and balm?
View 9 Replies View RelatedEverything in our small network worked until today when I had to manually reset the router. We run a application through a provider which requires that we view it from the same IP address for access. We have a statis IP assigned by our ISP solely for this purpose. For simplicity, lets us 23.11.23.176 as the statis assigned by our ISP and 23.11.23.175 as the gateway also assigned by our ISP. The application we need to browse requires that we use the 23.11.23.175 address else it is blocked from viewing. When we hard line into the modem, we are able to browse it fine. When I connect the CISCO router and do it wirelessly, it shows our address as 23.11.23.176 what are the required steps in order to set the CISCO router to use the Gateway address as the browsing IP for computers connected to it. We had set it up about a year ago, and i completely forgot how.
View 2 Replies View RelatedSo I recently had to get Comca$t xfinity cable internet due to Verizon Fios not being available in my new home.With Fios on my laptop, I didn't lose connection at all in 3 years.With Comca$t, I lose my wifi connection just about every other minute.It just keeps disconnecting and reconnecting.I'm running Vista.My Ipad is connected just fine and doesn't drop connection.This makes me think it has something to do with my laptop. They are the same distance from the wireless gateway.
View 11 Replies View RelatedI have Dell Vostro 1015. It came with Window XP SP3 back in Oct 2009 (It was in free DOS Mode). In October this year, I installed Window 7 Home Premuim 32-bit SP1. Bluetooth was working fine until I updated the drivers for Windows 7 from Dell website. Upon installing the latest bluetooth driver, it won't get switced on even after pressing Fn+F11. When I tried to reinstall it pops out "Switch on Bluetooth" message several times, but as usual fails to switch on.
View 1 Replies View Related