Unable To Link PC To Server On Another Part Of Network
May 26, 2011
I am having linking a computer to our SBS server. The computer in question is set in a warehouse on our site. We have a leased internet connection which is used on a number of different offices. The sbs-server has an IP address of 192.168.50.254 with a gateway Ip address of 192.168.50.1. The firewall on this network has an external IP of 10.50.0.37 with a gateway of 10.50.0.254 and this links to the leased line equipment. The external IP address for this network is 62.7.70.237. The PC in the warehouse has an IP address of 192.168.0.2 attached via a router to the leased line. The routers Ip address is 192.168.0.1, the external IP address is 10.50.0.55 and a gateway of 10.50.0.254. This links to the leased line and seems to have an external Ip address of 62.7.70.238. My issue is that I want the PC in the warehouse to be able to connect in some way to the SBS-Server. I cannot seem to access it via the external IP or the gateway (10.50.0.37).
I have latest 3.3 dlink d-view cam software and a dcs-932l ip camera.I noticed the remote streaming and remote recorded viewing (ports 5150 and 5160) as part of the server software. I know if i browse to my ip of my pc it allows me to view both services on html via windows plugin visual basic addon. My question is what iOS app and Mac OS X app will allow me to remotely monitor my dviewcam softwares network service for both live view and recorded view.
I'm trying to set up VLANs in my network.So the first device after the internet cloud is my ISP modem/router. I don't really use the router part. The second device is my Linksys WRT54G router with DD-WRT firmware on it.Between the two, there is a subnet just for them. After the DD-WRT router, there is a subnet for my LAN.The third device is my netgear GS108T switch (with vlan support) to which almost all my computers are hooked up. One of those computers is my server that is domain controller and has the roles as shown in the image. What I would like to do is to create several virtual machines in Hyper-V. The trick is that I want to isolate them from the rest of my network. They should be able to access (and be accessed) from the internet but not the rest of my network. So my whole network should be in the same VLAN but each VM should be individually in separate VLANs.
1) I've allready created the VLANs on my Netgear Switch. I know my DD-WRT also has VLAN support. Do I need to create the same VLANs on that also?
2) How to configure the VLAN part of the Hyper-V server? (by the way, my server OS is Windows Server 2008 R2 with the hyper-v role, it's not the bare-metal hyper-v)Should my Virtual Switch be in VLAN 10 and my VMs in the other VLANs?Should the port (on the netgear switch) in which my server is connected, be in VLAN 10 (so that my server is accessible from every other computer in the network)?
I've noticed that many people have routers with NAT as part of their security configuration. What NAT is/does? Also, I entered the router's settings and went to Advanced > Firewall > NAT ENDPOINT FILTERING .There are 3 options specified for UDP/TCP Endpont Filtering; they are:
Endpoint Independent Address Restricted Port and Address Restricted
What are these options? I downloaded the manual for the router but it doesn't mention what NAT, Endpoint Independent, Address Restricted, and Port and Address Restricted are.
Side Note: I thought about setting up a secure connection using WPA2. Right not I'm using an unsecured wireless network. If I setup a new secure wireless connection using WPA2 will my current unsecured connection still be available?
I have a problem with my home network (diagram attached below). I sporadically lose connection between my Router and the devices behind the switch. I have replaced the Ethernet cable between the 2 so I don't think the problem's there. It will work for a week or so, then just lose the connection. I then try a combination of rebooting all of the devices on the network and/or unplugging and re-plugging the cable connections and sometimes that works. It's a relatively new router, but can a router be "underpowered" for pushing a signa
i cant connect to most of my friends through xbox and computer, i also cant connect to some games servers. it also says that i have a nat strict. i don't care if my router has no security. i just want my internet to be fast and i can connect to people.
Just updated to the 1.01 firmware on my DIR-815 and now it doesn't handle loopbacks anymore.
For instance, I have a dyndns address of ericnewton76.dyndns.org. This points to my router. Works fine if you're NOT within the router's internal network, ie, outside hosts can get in just fine (try it... http:// , you'll see an IIS7 welcome screen)
However, when INSIDE the network, the requests don't get connected properly, and they used to... ie, I work with code, so my svn repo is at ericnewton76.dyndns.org/svn but inside my network it doesn't connect properly anymore (whereas it used to before firmware update)
So now I wish I could back-peddle to 1.0 firmware.
Model : TL-WDR3500 Hardware Version : Not Clear Firmware Version : ISP :
As we say, I followed all the directions but I am unable to setup the ftp server on this router. I even disabled Norton's firewall but am unable to access the server via WAN.
Region : Argentina Model : TL-WR1043ND Hardware Version : V1 Firmware Version : latest ISP : telecentro
I recently purchased a tl-wr842nd, my printer is a hp laserjet 1020 and it is in the compatible list as I seen. The problem is that I connect the printer in the usb routers port and the led do not light up, I tried putting my pendrive to see if the usb routers port wasn't working but it does since the pendrive is accepted and online and the usb led lights.I downloaded and installed the latest firmware but there's no change, I did everything like it saids in the faq 415 where it explains how to install and use printer server with no luck.
Our head office has two 4402 wireless controllers 16 AIR-LAP 1142 access points in the office. we've just bought an AP541 for one of the regional offices. What I want to know is can I 8inergrate the AP541 into the wireless network with the 4402 so I can administer from a central site and so the wireless users will be active at the regional site connected to the WAN.
We are having a network of 7 computers and a server (Ubuntu server). The problem is, two of them are not connecting to the network. When i check the network card of these two systems, it seems working (the green light is blinking). When i replace these systems with a laptop, it connecting to the network and there is not problem at all.
I just moved to Auckland, NZ from the USA to go to school at the university here, and am having a problem connecting to the internet in the university residence hall in which I am living.Wifi is not available in the residence halls, so we need to use an Ethernet cable. When I plug in my computer, the network adapter icon says Identifying for a while then settles on Unidentified Network with no internet access, the IP is 169.x.x.x.When I try to release and renew the IP, it says unable to contact your DHCP server, request has timed out".I've tried multiple Ethernet cables, both brand new.I tried connecting to a port in a friend's room in the same building, and even in a classroom on campus, and both had the same result.Naturally after all that I assumed my NIC somehow died overnight while I traveled here, so I went to a computer repair shop expecting to have some hardware replaced, but we plugged it in there and it worked immediately so they weren't sure what to tell me.
I've gone through pages of old threads at this forum and others like it, trying solutions but having no luck.I've power cycled my computer, obviously I can't power cycle the whole network as it's for 200 people, but the IT people here have tried resetting it for me on their end as best they can. [code]
Work station of domain network stopped accessing the server and internet. Assigned IP address, since DHCP would not hand out automatic IP address. Was working fine before today.
i have a new smc router and my local ip address and remote ip addresses are very similar. The remote ip address is updating my dns server but i am unable to ping it. Its something like 122.61.xxx.1 ?
Started this morning woke up checked my phone no wifi hmm weird checked my hp tpuchsmart connected but jo internet access checked my router(netgear wireless N 300) made sure my modem and all wires are connectedNext went to my router ip 192.168.1.1 after reading some forrums i thought maybe if i changed the ip or sum i would have worked i know dumb though.. any way i believe i disabled my dhcp.. and one of the ip ad on the same page to 192.168.1.3 thats when it got worst i tried ipconfig/release saysNo operation can be performed on bluetooth network connection 2 while it has media disconnected.No operation can be performed on local area connection while it has its media disconnected(Its a wireless connection from my touchsmart to my router) I have tried goin back to the routers page but i can no longer find itI have also tried ipconfig/renew but i get this...No operation can be performed on bluetooth network connection 2 while it has its media disconnectdAn error occured while renewing interface wireless network connection : unable to contact your dhcp server. Request has timed out.No opration can be performed on local area connection while it has its media disconnected
Network error code 0x80070035 The network path was not found.
I read the previous posts on this error code but my sceanrio was not addressed. Dell Optiplex 980 i5-750 2.66GHz w/4GB RAM running 64bit Win7Pro SP1 and 64bit Symantec Enterprise Protection v.11.0.630
File server is Dell PowerEdge 1900 running 64bit Win 2008 standard server w/o hyper-v, SP2 and 64bit Symantec Enterprise Protection v.11.0.630
I support an OU in a large university domain. Myself and one other user are the only people experiencing this issue in an OU comprised of over 20 machines.
I recently had a networking guy set up a VPN for me, but for it to work properly he had to change all my IP addresses to 192.168.10.xx from 192.168.0.xx. My DAP-1522 (in bridge mode) continued to work but I am unable to log on to it, I think because it's address is 192.168.0.0. I have run into some other issues which makes me think I may need to upgrade the DAP-1522 firmware and/or assign it an address beginning with 192.168.10.xx, however I can't log on to the bridge. (Nor do I know how to change or possible reassign the DAP-1522's address through my router, a DIR-615).
Unable to use AirPlay on a D-Link network. Disable WMM in the Advanced->Advanced Wireless tab.I struggled for weeks with this. AirPlay worked fine on an all Apple network but when I switched to the DIR-655 as the router/ap AirPlay became invisible. I could see the Airport Express in the list of connected devices with an IP address but the AirPort utility and AirPlay enabled apps were unable to see it. Disabling WMM fixed it immediately and I am now back to streaming music.
I recently purchased a DIR-815 D-Link router. I've set up my network successfully; my laptop and smart phone are easily able to connect. However my desktop is having issues. My network card detects the wireless network I have set up, however the password is always rejected. I am typing in the correct password. I can get the internet to work on my desktop if I connect the router directly by wire, but I need the wireless to work. My desktop runs Windows 7.
I will try to explain my problem as clear as possible but my knowledge about networks and routers is very limited.
I have a DIR-615 version:C1 firmware:3.13NA My ISP is ATT DSL Modem is Siemens SpeedStream 4100, it does not have a router built in Internet line is connected from wall to modem, to router, to PC.
after I upgraded the firmware I had no internet coming out of the router, I bypassed the router and connected straight to the PC and I got internet. I unplugged the power on both modem and router waited a whole night (I was too tired) and in the morning internet was back to PC and I had WIFI again BUT. When I put a password on the WIFI network all my stuff finds the signal but cannot connect, if I open the signal meaning if I have no password and the WIFI is open I can connect all of my electronics without any problems.
I already tried using WEP and WPA but still unable to connect anything, I been leaving my signal open when I'm at home for the last week and I don't like it.
Before the update everything worked fine.
I don't know if this matters but I have a PS3, Wii, Roku box, Laptop and a couple cell phones connected to it. And there are like 6 or 7 network signals close to my house.
I am looking to the best way to add a link to our File server on our network. We have a win 2008 r2 server set up to share a directory for network storage. The storage server has a static IP and the way we access it now it so go to RUN and input "//servername" and it pops up the directory in Win Explorer. This has worked fine but now we are building an Intranet and I need a way to link the Data Storage on the Intranet site.
I recently bought 3 DCS-920 to monitor my home while at the office. However I can't seem to get the damned things to stream video using the dyndns service. I linked my router to the dyndns account and host service. I portforward the ports my cameras are assigned. Up to this point its all good, I can access the cameras and their settings pages while outside. However both the Java and ActiveX options for video streaming do not work. Even within the network, using their raw IPs to view the cameras the videos stream works.But putting in the hostname and port they are assigned brings up the camera page, but no video.I can only assume the ports the video and audio run on are seperate, as when I put one camera's IP in the DMZ host on my router, it works with the DNS. Unforunately I can only do that with 1, and I'd rather not do that at all.
Just got this & set it up today. Wanted to buy a couple more in the next few days; but wanted to test out the D-Viewcam service. The application (D-Viewcam) is not able to find my camera.I have 'ticked' the uPNP & the forward; tried to disable it as well. No luck.
Camera 942l is on ver 1.1 D-Viewcam = v 3.2 Both reside on the same LAN
I'm able to view the camera on the browser. And on my phone.
I reset my Dlink 615 wireless router. I held down the power and reset for 30 seconds and rebooting the system with the disc. I did change the router name, but believe everything else stayed the same. My desk top is working fine being "hardwired" but nothing wireless will connect.
I did see this time it installed Network Magic which I have since uninstalled and again rebooted the computer system and still cannot get the wireless to work. It shows the network available, but my password for some reason does not take.
I'm Using D-Link DIR 600 wireless router with my desktop CPU (Windows XP Professional SP1) using wired connection and Dell laptop (Windows 7 Ultimate) connected wirelessly. My problem is that I am able to access internet on bothsystems but they cannot see each other in network places. I am unable to sharefiles between the them. I have tried all the procedures mentioned in many forumsbut still not able to find a solution
My laptop's wifi is just working fine with TP Link but I'm unable to connect internet via wifi on my iPhone 3G. My iPhone's wifi just works fine in my office. Is there any solution available?
I purchased the EA6500 a few days ago, and when I'm connected to Cisco Connect Cloud I am unable to select Folder Access / FTP Server / Media Server. I click them and nothing happens.Also, the Cisco light on the router keeps blinking.
I have an EA2700 running latest firmware 1.1.38.138827. It is using Cisco Connect Cloud. I am unable to access the DHCP Reservations link under Connectivity/ Local Network. When I click on it, nothing happens. I've tried multiple browsers including IE 10 (Windows 8 RTM), Firefox 15, and Chrome 21. I also tried on a Windows 7 machine with IE 9 and the link doesn't work on that either except that it shows a box that says Invalid Character when I click on the DHCP Reservations link. I see no invalid characters on the screen. Any workaround other than downgrading the firmware or assigning static IPs on individual PCs?Also, on an unrelated note, where is the Dynanic DNS configuration on the Cisco Connect Cloud?
Region : Germany Model : TL-WDR4300 Hardware Version : V1 Firmware Version : V1 ISP : Kabel Deutschland
the firmware offers 3 different dyndns services. But opendns is not included, also there is no free field to choose protocol, server, password and network. Will this be updated in further firmwares?
Region : Others Model : TL-MR3020 Hardware Version : V1 Firmware Version : ISP :
After I configure the WAN setting on TL-MR3020, my laptop unable to connect to my TL-MR3020 anymore, the message says "windows was unable to connect to TP-LINK_POCKET_3020_B5F9AD".
Region : UnitedStates Model : TL-WR740N Hardware Version : V4 Firmware Version : 3.1 ISP : T2
I have a problem with my tp-link router. I dont have an internet access of the router, updated firmware... When i connect to router by laptop the internet works fine, but when i connect to router by phone i have an internet access only 5 second and than i lost it, but still connected. I don't know what is the problem here, maybe phone?
