Just got this & set it up today. Wanted to buy a couple more in the next few days; but wanted to test out the D-Viewcam service. The application (D-Viewcam) is not able to find my camera.I have 'ticked' the uPNP & the forward; tried to disable it as well. No luck.
Camera 942l is on ver 1.1
D-Viewcam = v 3.2
Both reside on the same LAN
I'm able to view the camera on the browser. And on my phone.
I installed my first IP camera. Things seem to have went ok with the installation andd router. I can view the video live from mydlink.com.I've tried the dlink software, but it can't find the camera so I can control recording options, ftp, etc. i've also tried 3rd party software that can't find my camera.I'm fairly internet savvy, but do not have access to my router admin atm. (cable company installed their own) My home ip address is supposed to be dynamic. I thought that would cause me problems viewing from mydlink.com, but it hasn't so far.
View 5 Replies View RelatedI have a new apple airport extreme wireless router and have done all the port forwarding and gave the camera a static address and cannot view my camera outside my network. I also have done the dyndns service also. I will note if I change the http port in the camera settings to say 82 I get a black screen and cannot view my camera till I switch back to port 80. Reason why I want to do this is I need to view my camera for more then 60 seconds.
View 5 Replies View RelatedI seem to be struggling to connect more than 4 cameras to my (ISP-supplied) modem/router by Netgear CGD24N via WPS. I'm on my 5th camera now (already have 3x 930L and 1x 942L) but the newest 942L just won't connect to the network at the moment and there's definitely no faults here as I swapped cameras today at the local retailer (and got an A3 942L!).I've even tried connecting the camera to my wireless extender (Netgear WN3000RP) but no luck there.
So far it has only worked twice for short periods of time (enough for me to configure the cameras) but since then I can't actually get it working. I've got a couple of spare wireless routers lying around too and should be receiving a DIR-600 soon (from the Netgear promotion in Australia) which could be useful?
I have four DCS-942L cameras and a 2012 model Airport Express router. I cannot view live video from outside the router in any fashion other than mydlink.com's poor quality time-limited forwarded video. Here is what I have done.I have manually mapped four TCP ports through the router for accessing the cameras' web servers. This works--I can access the camera settings that way, albeit with NO SSL support (dammit). So, fundamentally, port forwarding works on this router. The "live view" accessed through the camera's web server does not work, though.I mapped port 554 on each camera to ports on the WAN side of my router, TCP and UDP.I have made sure that the external ports set on the camera under "Enable UPNP port forwarding" are the same as the external ports set on my router. (Otherwise the web server wouldn't work from outside.)When I access the mydlink web site from inside the LAN, I can view my video. When I run netstat -n -p tcp, I can see connections open to the local 192.168.0.* addresses of my cameras, so it is connecting via the LAN.If I connect to the Internet outside my LAN, and use the mydlink web site, I get the forwarded, mini-sized video with a 60 second limit. netstat reveals that connections are being attempted to the INTERNAL ip addresses of my cameras, which of course cannot succeed from outside. In addition, if I try to stream video using QuickTime Player from outside, using the URL [URL], the player connects, then says "waiting for stream" and then "switching transports." It gets stuck there and does not proceed. On the LAN, using the local IP address, I can stream video just fine.
Any way to change this?What other ports do I need to open to make the video stream work? I tried mapping ports 5556-5559 to one of my cameras, but that did not work. Also, I have four cameras and need to be able to map to all of them for this to work.The AirPort Express supports "NAT Port Mapping Protocol" which, from my limited research, is not the same as UPNP. How to successfully viewed video from outside a router without using UPNP?I have scoured these forums considerably and have read some success stories using UPNP. From the DCS-942L manual, it seems like I should be able to set up manual port forwarding in some fashion to make the video stream work. Clearly, though, some auxiliary connection is being attempted and the client cannot get through to the camera. Is it possible to even pick this statically, or is the port always dynamically chosen by the camera and therefore absolutely must be set up on the router using UPNP? If I can't make static port forwarding work, then these cameras are headed to camera heaven soon.
I'd had my camera offline for the last couple of months, and in the interim I've upgraded both my main pc and the wireless router. I'm running Windows 7 Ultimate 64-bit on the pc, and the router is a netgear gigabit dual band wired/wireless. When running through the camera setup I am not able to get setup to find the camera, whether wired or wireless. I know that the camera's online as it shows in the routers device table, and I'm able to access the camera with my browser. However, the failed setup prevents my registering the camera on MyDlink. Any thoughts? Should I be looking at the ports on the router in regard to the camera's IP?My goal is to be able to remotely monitor my home, which the MyDlink service seemed to offer. Based on what I've read, it appears there are other ways to achieve my goal, but I would like to figure out the install problem.
View 1 Replies View RelatedI have a setting where we are using some DCS930l cameras connected to a 2003 server. We are using the remote viewer and can see one camera but not the others. We have 5 cameras. We try to drag and drop the other cameras, but nothing shows up. Only the 1.
View 1 Replies View RelatedIs it possible to configure a 3rd party product with D-Link D-Cam View program? We want to combine three D-Link IP cameras DCS-2210 with a epiphan VGADVI Broadcaster (url...). The epiphan product can provide a http mjpeg video stream that can be displayed with a normal Webbrowser, VLC or other programs like that.I can connect to the broadcaster with this URL...
View 1 Replies View RelatedI having issues with DView 3.11 on a WinXP Professional with SP3.There are 4 DCS 5300G cameras wired to the router.I can see the cameras using IE, but when I try to configure the DView in the camera section with the autodetect button it will show an error that the camera cannot be identified.I had checked the IP address, port, user & pass everything is ok. I even hard reseted one of the cameras and it won't work.
View 1 Replies View RelatedI just purchased 2 cameras and have one set up.
Firmware V 1.12
Works great on my android phone and connects fairly quick. When I try to see the camera image on my PC with windows 7 64 bit, I log into my d-link and it shows the camera name on left side of screen, then says Java run time environment not installed.I uninstalled java 5 times and re installed both 32 and 64 bit but keeps coming back as not installed. Camera is set up wirelessly through a Belkin router, so far no EZ config
Is there such a possibility in the firmware or through telnet?
View 3 Replies View Relatedi bought wireless camera dcs942l everything works but my sd card 32 gb is not recording the camera is not recording in my sd card i formated sd card still not recording camera works good quality picture network working but not recording on my sd card and i can not record in my computer
View 5 Replies View RelatedHas anybody gotten the FTP option to work with this camera? And if so how did you set up the path to point to the ftp share. The instructions say one thing but that one thing doesn't work. FTP is setup locally on my NAS box which does work. Or is this another one to add to the Firmware which list?
View 4 Replies View RelatedMonths ago i can enter in the camera interface by using 192.168.1.100 , its correct ip to enter in the cammera ? Now i dont know what is happening i connect the ethernet cable correctly from PC to the camera and i type in the browser : 192.168.1.100 but nothiung happen ?
View 4 Replies View RelatedI can access my DCS cameras directly using several iPhone apps such as IP Cam Viewer Pro. Is it possible to access the camera directly using a web browser (I have tried without success) e.g. do you need to use a specific port?Also, the DCS-942L has RTSP. I am not clear as to the difference between RTSP and HTTP streaming of video, any resource that clarifies with respect to D-Link cameras?
View 2 Replies View RelatedI have a DCS-5220 cam and when I connect to the camera throught internet from a computer in a different city, I have a problem with the plug-in : quicktime plugin is used and impossible to find the plug-in of D'Link.so impossible to zoom or the change the motion detection parameters,.
View 4 Replies View RelatedIs it necessary to remove the card from the camera to manage (view, edit, delete) the recordings?
View 2 Replies View RelatedIt didn't fill it up completely, it stopped at the 200 meg free mark, however I have cyclic checked (which btw is not mentioned anywhere in the manual). I assumed this option would cycle by deleting the oldest file to continue recording.
View 1 Replies View RelatedIn my Ipad (I have Dlink+), I can only see 1 minute of the Cameria 942L...the faq says that I need a conection witn Upnp.I have a Cisco EA2700 and I check the box of Upnp,,but I still cant see my camera from more than a minute,, then I have to reload.
View 2 Replies View RelatedI recently bought 3 DCS-920 to monitor my home while at the office. However I can't seem to get the damned things to stream video using the dyndns service. I linked my router to the dyndns account and host service. I portforward the ports my cameras are assigned. Up to this point its all good, I can access the cameras and their settings pages while outside. However both the Java and ActiveX options for video streaming do not work. Even within the network, using their raw IPs to view the cameras the videos stream works.But putting in the hostname and port they are assigned brings up the camera page, but no video.I can only assume the ports the video and audio run on are seperate, as when I put one camera's IP in the DMZ host on my router, it works with the DNS. Unforunately I can only do that with 1, and I'd rather not do that at all.
View 6 Replies View RelatedI have installed two 930L cameras which work fine via mydlink. When I attempt to connect them to D-View Cam 3.11 they fail to connect or will not stay connected.I first tried connecting to the router with both cameras in the same room as the router. One will connect and stay connected but the other will connect and freeze or not connect at all. If I move th GOOD camera out of the room, it will not connect.Do I have a router issue? I am using Verizon FIOS with their supplied router (Actiontec, I think). My wireless laptop connects but signal strength is never 5 bars.
View 2 Replies View RelatedSetup my DCS-930L for DDNS (Dynamic Domain Name Server) so I can access the DCS-930L via the Internet (couldn't access the camera half the the time while on vacation using mydlink) and can now access the camera using my laptop, Android Thrive, and Motorola Droid 3 via the URL I've created but can only see the video when using the laptop.
I have the DCS-930L set to Java but when I log into the camera with the Thrive or Droid 3 (both Android devices) I don't get video. I can make changes to the camera settings and everything else you can do when logged into the camera but just can't see the video. If I change the 'View Mode' in the video setup to 'Image', I will get a picture on all three devices (Thrive, Droid 3, and laptop).
What do I need on the Droid 3 & Thrive so I can see the video when I log into the DCS-930L with an Android device?
I asked a question recently about accessing camera via a smartphone but I realize that's not really the correct question. The smartphone works fine locally with wifi and has a browser available.
The real question I have is what is the easiest way to access any camera via a browser from a remote location. Years ago tech friend assisted me access my DCS-910 using dyndns.org. It was free and worked great. I guess it went away when they started charging for a basic account.
Is there an easy way to access a camera without using dyndns even if it involves putting in an IP address instead of a convenient domain name? I would just like to see at least one of my cameras in a browser off-site. If I have to pay $20/year for dyndns I can but I would prefer not to if possible.
I initially set it up for static IP, which was a mistake for reasons I probably don't need to go into here. Having recognized my mistake, I've been trying to hard reset it so I can convince it to acquire its IP address by DHCP, but each time I reset it and return to the "First, select your camera" screen in the setup wizard, I'm faced with a single choice: the device as I first set it up for static IP. I don't seem to be able to convince it to give up that erroneous static IP address.I have read the FAQ section on hard reset. I've held down the reset button for a lot longer than 6 seconds while the cam was connected to power and ethernet, and I've watched it go through the sequence of flashing blue reset and WPS lights until it settles down, but this doesn't change the situation, evidently.
View 7 Replies View RelatedMy camera saves video as .avi files, but when I open them in Media Player, all I get is sound. The camera works fine, as I can view live video, but the saved files show nothing, just have sound.
View 4 Replies View Relatedi play with my brandnew 942L Camera and everything works fine. The only thing i cannot get to work is to play recorded videos from the playlist on my mobile phone.I use myDLink Lite and the video-settings in the 942L for profile 4 (mobile devices) is set to MPEG4, 320x240, 5 BPS, CBR Quality, 384kb/s, "3gpp".
View 1 Replies View RelatedWhy my network camera cant find the WIFI network when work well with the wired? The other WIFI devices such as notebook works well.
View 1 Replies View RelatedI have my 942L set up for continuous recording. When I look at the files, the camera will record between 20 and 55 seconds, end that file and start another. The next file then starts between a few seconds and as much as 40 seconds later leaving a gap in the video recoding. The file sizes are all different and the amount of record time is different for each file.
Also, about 80% of the time, the time increments a few seconds on a playback and then stops updating even though the video is longer.
I just got the camera today, looks good, works good, at least so far.. BUT I was SURE this camera had a battery and charge function!? What's the point of having this camera if I can't place it say inside my car or in the garage (where it needs to be hidden, alas I can't use any cords!)?
View 5 Replies View RelatedAnyone using it to save videos from their cams? Are you using Synology NAS? Am interested and want to hear from people qualified to discuss NAS. Qualified means you are currently using NAS or have thoroughly researched it to the point you have made your purchase decision for the most part.
View 6 Replies View Relatedi have both 932L and 942L and the 932L was plug N Play and no problem setting up with my WiFi. But i can't get the 942L to work. Works fine with the Ethernet cable but not wireless.
Come on ... I can't be the only one with this problem? I have two 942L cameras and neither one of them can I get connected to the wireless network.
I would like to turn on continuous video recording and have it sent to a drive on the same network as the camera without going through a computer. Is there a way to setup the "storage folder" as a network drive? For example my network drive is accessed at \192.168.0.1volume1 through a web browser.
View 1 Replies View RelatedI tried several times to see the DCS 942L camera picture on my Samsung Advance S smartphone on UMTS 3G net but also setting the video parameters profiles at minimum (64 Kbit/s) it does not work. The MyDlink lite version is the 2.6.1. release. Locally ,using Wi-Fi it works well of course.
View 5 Replies View Related