Connect To Local Exchange On Machine With 2 NICs
Sep 12, 2011
I have a PC on a crowded network that cannot handle much more bandwidth usage.I am now going to have a tons of transferring to do offsite so I added a second internet line just to deal with the influx of file transfers.I tried a dual WAN setup on my router and the performance was not improved (if it was nobody noticed it) so I said forget that idea, I only need to do these massive transfers from 1 PC so I will just add a second NIC to the machine so that the 1st NIC can maintain local network functionality and the 2nd NIC will be just for internet traffic (sending files up/down to offsite location) Essentially I just need NIC1 for handling local network, connecting to exchange etc. and NIC2 to handle files transfes to offsite location through seconday internet line.So now I have a desktop PC with two NICs. One of them built into the board, the other a pci add on nic. they are both 10/100
On nic1, there is a connection to my network 200.200.1.X which is the internal network for Exchange, local files transfers etc. This is the network i have always had connected and I have no problem connecting to my exchange server etc. (my server is providing dns/dhcp/wins/AD/MSE for the entire network)so I installed a secondary NIC and a secondary network line to the NIC2 on the machine.I set it up with an IP, a SN, a gateway and a DNSI removed the gateway from the 1st NIC.SO then I tried adding a gateway to BOTH of the NICs..This allows me to do EVERYTHING I want, however when i go to whatismyip.com and get a result, the IP it is giving me is NOT either of my static IPs (each network has a seperate internet line with a static IP). Not sure where this IP is coming from, but if i tracert google.com it says I am going out through the primary adaptor.The new IP from whatismyip.com makes no sense to me as it is not either of my static IPs, however it is very close.Would this be a situation where my ISP see's I have 2 gateways defined so it generates a 3rd external IP for some reason? Never heard of this but i am no guru.essentially I just need NIC1 for handling local network, connecting to exchange etc. and NIC2 to handle files transfers to offsite location through seconday internet line.
View 10 Replies
ADVERTISEMENT
Jun 19, 2012
Server 2008 has two Nics one connected to outside switch and has internet, other Nic is connected to local siwtches which has 20 systems connected locally but does not have internet. Local systems were getting IP from server, but there was not internet on the lan systems, I restarted the server and local systems lost IP address. earlier everyting was fine.
View 2 Replies
View Related
Feb 7, 2013
I'm in the process of installing a Virtual Clustering for studying and wanted to get some mail filtering for my Exchange 2010. Of course my clients and what I normally use is cloud filtering like mimecast, etc. Any know of a local filtering software or a virtual machine that does filtering I can place between my IP and Exchange?
View 3 Replies
View Related
Oct 24, 2011
I have an ASA 5505 i have uploaded updated clients to the ASA, when a user connects to remote.company.com either via the portal or an existing Anyconnect installation, vpndownloader downloads the new client to the machine and installs it.
My question is, where does it store the new installer on your local machine?I tried searching, but i just get a bunch of crap of where to illegally download anyconnect, instead of anything useful.
View 2 Replies
View Related
Aug 3, 2012
I have a 2911 router inside our network with both DHCP and DNS enabled. Everything works fine except since we use this router we are not being able to go to the network neighbourhood in Windows and look up machines by name (or typing \diskstation for example). Connecting by IP works fine but not by local machine names.
View 10 Replies
View Related
Feb 11, 2011
I have a networked PC with 2 NICs.One is connected to our business network, with a static IP address (10.38.75.xx) the other NIC (10.42.10.xx) is connected to a Controller machine.The business side of things works fine - network access & internet access works well.The intent with this PC is for a vendor to be able to RDP it (which he can) then open a browser and use the Controller's IP address (10.42.10.33) to access and control the connected machine.I am an administrator - logged in as myself, and trying to browse to this IP address, the page tries to load forever. It never times out or displays an error - just continues trying to load.At first, the vendor that was accessing this machine, when logged in as himself, COULD get the web page to open up at that IP - but he wasn't authorized to install an activeX program that needed to be installed. Logged in as myself, I couldn't get to the point where it asked to install the program.
Because I couldn't figure out how to fix this, I just set him as a local administrator as a short term fix - now he can't access the web page either. I've tried setting him back (removing his adminstrator privileges) - but now neither of us are able to access this page.
View 8 Replies
View Related
Jan 8, 2013
I am working on Cisco 3550 switch on a certain requirement. I have got an access point connected to the switch and few mobile phones connected to the access point. I get the list of mac addresses connected to the switch ( Both access point's mac address & the clients addresses) by "show mac-address table dynamic" command. However, i am unable/confused to get the output of the following scenarios:
1. I would require to export the mac address from the switch to the local machine in any format (May be by using an SNMP tool, if available) so that the same needs to be used in my C# for development.What would be the way for the same ?
2. The mac address in the mac address table doesn't get updated dynamically. (Eg Scenario: A wifi client gets connected to an access point which inturn is connected to the switch, the mac address of the client shows up in the switch table. However if the client is disconnected, the client's mac address would still be displayed in the switch table )
View 9 Replies
View Related
Mar 22, 2013
I have 2 nics in my win7 system, NIC 1 connect to leased line and NIC2 is connected to organization LAN for internet. Both the ip add are in same subnet. when both the cables are plugged in to nics, leased line link connected to nic1 goes down. It wouldn't come up untill the cable from nic 2 is plugged out.Basically i wish to be connected to both the networks simultaneously.
View 1 Replies
View Related
Apr 12, 2009
I'm hosting my email on an Exchange Server 2003 box and have my laptop (Vista Ultimate 32 bit) setup to connect to the exchange server for my email. This works fine through a LinkSys RV042 in one location and a LinkSys WRT54GC in another, but fails through the DIR-615 B2 (2.24 firmware) at home. I'm guessing it's blocking something needed for the MAPI connection.
View 2 Replies
View Related
Dec 30, 2012
Since I have installed my new router, a Linksys EA6500, I have many problems to connect to my Exchange Server, which is located in my house, via Wifi. I tried to synchronize my Iphone and my Samsung tablet but it won't work. Most of the times I get the message that the Exchange server cannot be connected. When I turn off my Wifi en connect via my mobile provider I have no problems. When I am on a third party wifi I also can connect my server. Seems my own wifi causes lots of problems.
View 6 Replies
View Related
Aug 21, 2011
I just recently installed a RV220W at my office and (almost) everything works fine. I have noticed that when my iPhone is connected to the RV220 wi-fi network, I get the message "The connection to the server failed" when checking my email. If I disable the wireless on my iPhone, it connects up to the exchange server perfectly fine so it must be a setting with the wireless somewhere but I cannot find it anywhere.....
View 1 Replies
View Related
Aug 2, 2011
I have a strange error on my home network that I cannot find a solution to.I have an Huawei SmartAX MT882 from TalkTalk acting as a modem connected to a D-Link DSL-G624T acting as a router/switch. Connected to the D-Link I have a Windows 7 Pro machine (64-bit, SP1) and an XP (home i think) machine (sp 2 i think).The SmartAX modem is set up to perform DHCP and DNS relaying and the D-Link has DHCP turned off and DNS relay turned off.The Win7 machine can access the network, get an IP address and access the internet without problems, regardless as to the status of the XP machine.The XP machine can access the network, get an IP address and access the internet with no problems ONLY of the win7 is powered up. When the win7 machine is off, the XP machine seems to drop about 25% of the ping packets between it and the D-Link router and has no internet access (because of this i assume). [code]
View 8 Replies
View Related
Jul 20, 2011
New Win-7 machine set up. I used the printer set-up wizard to install a networked printer in the new machine with absolutely no problem. Proved it would print from that machine.Now, I get a call informing me that her old XP machine, which had been printing to the network printer with no problems, will no longer print.Documents go into the print queue, but they don't get printed.No error messages show up.I did some messing around via remote access, and finally removed the printer with the intention of reinstalling it.Scanning for network printers turned up several redundant instances of the same printer with different names. Some are identified as "invalid" some a "access denied". Bottom line. I can't get any of the selections to install.On the Win-7 machine I did find a window that indicated that the printer is designated as being shared, but I didn't explicitly set it for sharing when I installed it. Also, I somehow got to a window that told me that for printers that were to be shared with other versions of windows I could optionally install drivers to support such machines. Didn't have the driver disk handy and took the window down. Now I can't even find it again.I need sorting this all out.Part of the problem is that out there in "network land" there are redundant remnants of previous installations that are being remembered inappropriately.
View 11 Replies
View Related
Jun 11, 2012
Everything in the house can connect to the internet aside from my windows 7 machine. It was working fine acouple days ago. it was connecting via a wireless network adapter through a USB. I tried switching the USB ports, hardwiring, re-ownloading/installing the drivers and even reformatting the machine. i still cannot get an internet connection. Only logical thing to do would be to replace the NIC ?
View 3 Replies
View Related
Jan 31, 2012
I have to connect client machine using Modem. They Have their Telephone number and they are saying that by dialing that number I have to connect their machine using that number from modem. How can I do this and which hardware, software I need i.e requirement of things to do this
View 2 Replies
View Related
Mar 19, 2011
I have bought B&N Nook color it is an e-reader. And it couldn't connect to my WiFi use the WEP so I changed my wireless setting to WPA/WPA2 now my e machine N-10 will not connect to the network.
View 1 Replies
View Related
Jan 3, 2011
I just replaced my router and EVERY time I do anything the win 7 machine is a pain in the A to get connected again. My two macs (wireless) and my Vista PC (wired), not one single problem but this win 7 thing I can't get to connect. It is wired not wireless.
View 10 Replies
View Related
Jun 1, 2012
I have created a virtual server that hosts a ticketing website on it, locally i can access the website when i input my private ip .
Now i want to make it accessible to the agents outside my company , i have change my private ip to a public one, but the problem is still there,i cant connect . i disabled the firewall , just so i would be sure its aint a F.W problem and still , not working .
View 2 Replies
View Related
Mar 29, 2013
I have a DIR-655 B1 with FW 2.05.I have different computers/phones connected to internet via the router, both via wifi and ethernet. I have Linux/Windows 7/Android and iOS units. Two weeks ago one of my Windows 7 laptops did not connect to internet and I thought it was the computer. I did a lot of troubleshooting the computer, still did not work at home. When I brought the laptop to a friend it work directly. Now I started to think that it was the router that was the problem. On the status page I can see that the machine got an IP address in the "LAN Computers" part. I can confirm in the laptop that it received the same IP address via DHCP.
I have look around in the menus but can not find anything that should make this computer not connect. I can not even login to the router via this computer.
View 7 Replies
View Related
Apr 29, 2012
I have a network problem. My windows 7 machine is not detecting win xp machine whereas win xp machine is detecting win 7 machine. They are in the same workgroup named Home. And the networking system is set to work. I have left the homegroup I was previously in. I enabled file sharing for devices that use 40 bit and 50 bit encryption. On XP I have enabled NetBios over TCP/IP. File sharing is enabled on both computers. I think it's something obvious as both instalations on different computers are really fresh and both windows haven't been tampered with.
View 12 Replies
View Related
Nov 15, 2012
I have been working with a friend set up a brand new laptop with Win-7 Home Premium (64 bit) preinstalled. I did the initial set-up at my home, with the machine connected via broadband internet cable to my router. I had absolutely no problem getting it to connect with the internet. Didn't bother to try getting the thing going wirelessly at my location. During the initial setup, I selected "home" as the network type (as opposed to public, etc.)But, when I took the machine to the owner's home, it wouldn't connect via her broadband modem.
Mousing over the network icon in the tray area brings up a tool-tip baloon, "Unidentified Network, No internet access). Opening the Sharing Center shows the network as "Unidentified Network, Public Network. None of the settings accessible to me from that point seemed useful or relevant.I have not been able to find appropriate settings to redefine the network type, etc. Her old machine, which is in the process of dying, is still able to connect, and I'm using the same cable to connect both machines. To top it off, I very recently upgraded my own laptop to Win-7, so I took it over there and it exhibits the same problem. And, if I bring her machine back to my house it connects right up with no fuss at all.
View 14 Replies
View Related
Mar 9, 2012
I'm having problems connecting to the VPN. I can access the web portal, but cannot connect SSL VPN on my Mac 10.7, or a virtual windows 7 machines. I've read a lot of forum posts about the mac problem, but for some reason the Windows 7 machine won't connect SSL VPN on windows 7 x64, Chrome, FIreFox.
I tried downloading QuickVPN and set up a user account, but it just sits on the machine at the "Connecting" screen. My primary users will be running Windows 7 Professional x64.
View 1 Replies
View Related
Oct 9, 2012
Just got an EA6500 - updated to the latest available firmware.I've attached 2 x WD NAS and 1 x WD via USB to the unit.Everytime AFTER I finished running Time Machine on the MacBookPro (writing to one of the WD NAS), I can no longer login to the router neither from the local IP address nor the cisco cloud connect. The error message that I get (loosely phrased) is: can't connect to Router. Please ensure the router is connected to the internet.
View 2 Replies
View Related
Apr 3, 2013
I want to buy the CISCO C819G-4G-G-K9 M2M Router. Studying the characteristics as I always do, I discovered (incredible for me!) that so a sophisticated and expensive router has not the WLAN. Nevertheless, to have the Wi-Fi connection is essential for me.
which is the instrument or machine of Cisco that I must use to connect to the CISCO C819G-4G-G-K9 M2M Router and to have the WLAN 2.4/5 GHz? Will this be possible?
View 12 Replies
View Related
May 15, 2013
I have a host machine (Laptop, Win 7 Home Premium x64) running Windows 7 Ultimate x64 on VMWare Workstation 9. I've got this system set up for UMDF driver development, because I need a target machine to debug drivers on. However, because I'm developing drivers for Win 7 (x86 and x64), I cannot connect to the virtual machine on via a simple network connection. Connection methods are outlined here.
I have tried a few different pieces of software (mostly Eltima software), and have Google'd every combination of phrases that I can think of. I can't find any information on this anywhere. I don't just need to share data between the machines, I need a more "physical" connection.
Does any know how to do this, or if there's another (preferably more simple) way of doing it?
View 1 Replies
View Related
Apr 22, 2012
I have two NICs and two seperated network connections on Windows Vista System. I want all visits to websites that are blocked by our Corporation LAN go to the external network, so I can use my personal emails etc.All the other applications still use corporation LAN.
1) Corporation LAN subnet: (Connection 1 - DHCP)
IP: 142.241.X.X
Subnet: 255.255.255.0
Gateway: 142.241.X.X
2) External network LAN subnet: (Connection 2 - DHCP)
IP: 192.168.1.X
Subnet: 255.255.255.0
Gateway: 192.168.1.1
View 2 Replies
View Related
Nov 2, 2011
I am planning the following network setup.Get a server with 2 NICs, a router and a switch ,1st NIC is connected to Internet2nd NIC is connected to a router,A router is connected to a switch,All the client workstation are connected to Switch to access the server.I believe with this setup all my client workstations can browse the internet on their local machine via server.
View 11 Replies
View Related
Feb 27, 2013
I have a quick question to ask regarding bridging two NIC/LAN ports on my home server to two LAN ports on a single gigabit router. Is this possible? Will the router have any trouble determining IP addresses? If so, is a certain router required for this to work that I am unaware of? I'm run a google search for any info on this subject but this particular question doesn't seem to have been asked that I'm able to find.
I'm essentially looking to increase any bandwidth throughput if possible for content streaming on my home network.
View 4 Replies
View Related
Apr 3, 2012
I have two nics (one on DHCP and on the internet) and the other with static IP and connected to a PLC. Is it possible to set the later to enable the PLC to access internet resources while keeping that network arrangement.
View 1 Replies
View Related
May 26, 2011
i am trying to use windows server 2008 R2 as a host machine, and i will be using windows server 2008 R2, and windows server 2008 serverCoreR2 as guest virtual machines. I have two NICs on my computer, and my computer has the memory, the hard drive space, and the cpu to handal this.
View 1 Replies
View Related
Mar 21, 2012
I want to route traffic from nic 2(192.168.2.1) to nic 1(192.168.1.1). In lame terms route the traffic from 192.168.2.10(gateway 192.168.2.1) to 192.168.135(192.168.1.1). I know how to use the route command in CMD. So how would I get the traffic from 192.168.2.10 to 192.168.1.135? I'm just not sure how I would do that with the route command. I've tried
Code:
route -p add 192.168.1.135 mask 255.255.255.0 192.168.1.1 IF 12
Also tried like 5 different ways The IF 12 is my NIC 2.
View 19 Replies
View Related
Dec 1, 2011
So i have a server with an internet nic and lan nic. The internet nic gets its IP from the router 192.168.1.7 the lan nic uses DHCP for the network and has 172.16.1.1. I just turned on the ftp service and it works fine in the lan side but cant reach it from the ISP side. I use a dynamic dns host which is monitoring my internet ip and is correct.
View 6 Replies
View Related
Apr 4, 2012
Ok so even though this isn't really needed, it's for a 10 user office I have two tower servers with dual nics but not the same brand (just bought a cheapy gigabit startech) to go with intel on board nic. Also my switch is also gigabit which is a trendnet teg-s24dg which does not support link aggregration.
But since I have two nics and both servers are running win2008 enterprise I want to use the other nics for throughput if possible. So to give an idea servers are doing DC/AD and fileserver DFS rep. If I turn one off the other picks up and network still functions (there is a small lag since dns has to pick up that other is not responding. So far the best I can think I can do with the extra nic is add ip's to second nics and add to dns and round robin or install NLB role to for two server cluster.
I can't really team them since they are two different brands, so what would you do or do you suggest I can do with them. Also I have a T1 and dsl going into a dual wan firewall dsl is not being used for anything. (might use it for a seperate wifi network if people need it.
View 1 Replies
View Related
