I have to connect client machine using Modem. They Have their Telephone number and they are saying that by dialing that number I have to connect their machine using that number from modem. How can I do this and which hardware, software I need i.e requirement of things to do this
View 2 RepliesI have a PC behind a DSL router. In my PC (WinXP SP3) I have a virtual machine also running WinXP SP3. I would like to access the VM via remote desktop. Since I have a dynamic IP, I use the(url)tool to solve the problem. I installed the no-ip sync tool in the VM. Now when I write my no-ip address in the remote desktop from my office, I will access my host system, and not the hosted VM. Does any knows how I should configure things in order to get access to the virtual machine and not to the host machine
View 5 Replies View RelatedI have 4-5 machines connected to each other in network which are in workgroup. Now I want to change one group policy on remote machine. The name of that policy is " Network access: sharing and security model for the local accounts :- Guest only" . How can I change this policy from remotely?
View 1 Replies View RelatedI have a Win 7 machine with Win SBS 2011 in my office and an iMac. The Win machine is being setup for Exchange 2010. My problem is this: I can't Remote Desktop in from my iMac into the Win machine, but CAN when outside the network.The Win7 machine has a static IP, the iMac a dynamic. When I access the internal part of my router I can only see my iMac. I get a "can't connect to win-based machine" error when I try to Remote Connect.The only thing I can think is that using the same gateway is somehow messing things up? I've had two techs try to figure this out and they're both stumped.I was maybe thinking that since both comps are going out the same gateway that I should try anc configure the iMac to try and RDC on a different port, since maybe the iMac is listening on 3389 and sending the RDC back to itself?
View 4 Replies View RelatedIf I am not able to start remote desktop services on windows 7 machine, will machine can be accessible by RDP?
View 1 Replies View RelatedI have an GRE Tunnel across my head office and remote site with multiple subnets using cisco 1841 routers.I can ping most of the devices on the remote side, but I can not ping certain devices.These devices respond to ping requests on the local LAN, but not through the WAN link. If I change the IP of device than it start responding. I am using same gateway and mask on these devices.The remote site is running classic STP on switches with distribution switch being the root bridge.
View 4 Replies View Related802.1x is working properly, 802.1x port is up,but;when I do a remote desktop to machine that is 802.1x authenticated by an user(Wired), first, login to pc successfuly then(3 minutes) is switch port down..
Debug radius authentication
Debug aaa authentication
Does not appear in the log only message port is down
Equipment;
Cisco 2960, Cisco ACS 4.2 ,MS Active Directory Authentication
Client:windows xp, windows 7
Cisco 2960 Port Config
switchport mode access
dot1x pae authenticator
dot1x port-control auto
spanning-tree portfast
spanning-tree guard loop
I'm trying to set up a VPN tunnel between a Linux machine and a RVS4000 at a remote site (served via satellite connection). After many efforts, I finally succeeded (based on Openswan). However, while PINGing is OK, big packets (from the RVS4000 LAN to the Linux box) arrive corrupted.
I lowered the WAN MTU, with no success. What finally did the trick is to lower the MTU at the RVS4000 LAN interface. Since this is not possible via the Web I/F, I did it via telnet ("ifconfig eth0 mtu 1400"). However, this change is lost after router reboot. How can I make the LAN MTU setting permanent?
I have a strange error on my home network that I cannot find a solution to.I have an Huawei SmartAX MT882 from TalkTalk acting as a modem connected to a D-Link DSL-G624T acting as a router/switch. Connected to the D-Link I have a Windows 7 Pro machine (64-bit, SP1) and an XP (home i think) machine (sp 2 i think).The SmartAX modem is set up to perform DHCP and DNS relaying and the D-Link has DHCP turned off and DNS relay turned off.The Win7 machine can access the network, get an IP address and access the internet without problems, regardless as to the status of the XP machine.The XP machine can access the network, get an IP address and access the internet with no problems ONLY of the win7 is powered up. When the win7 machine is off, the XP machine seems to drop about 25% of the ping packets between it and the D-Link router and has no internet access (because of this i assume). [code]
View 8 Replies View RelatedNew Win-7 machine set up. I used the printer set-up wizard to install a networked printer in the new machine with absolutely no problem. Proved it would print from that machine.Now, I get a call informing me that her old XP machine, which had been printing to the network printer with no problems, will no longer print.Documents go into the print queue, but they don't get printed.No error messages show up.I did some messing around via remote access, and finally removed the printer with the intention of reinstalling it.Scanning for network printers turned up several redundant instances of the same printer with different names. Some are identified as "invalid" some a "access denied". Bottom line. I can't get any of the selections to install.On the Win-7 machine I did find a window that indicated that the printer is designated as being shared, but I didn't explicitly set it for sharing when I installed it. Also, I somehow got to a window that told me that for printers that were to be shared with other versions of windows I could optionally install drivers to support such machines. Didn't have the driver disk handy and took the window down. Now I can't even find it again.I need sorting this all out.Part of the problem is that out there in "network land" there are redundant remnants of previous installations that are being remembered inappropriately.
View 11 Replies View RelatedEverything in the house can connect to the internet aside from my windows 7 machine. It was working fine acouple days ago. it was connecting via a wireless network adapter through a USB. I tried switching the USB ports, hardwiring, re-ownloading/installing the drivers and even reformatting the machine. i still cannot get an internet connection. Only logical thing to do would be to replace the NIC ?
View 3 Replies View RelatedI have bought B&N Nook color it is an e-reader. And it couldn't connect to my WiFi use the WEP so I changed my wireless setting to WPA/WPA2 now my e machine N-10 will not connect to the network.
View 1 Replies View RelatedOn wireless (lenovo tabletx61) I cannot connect through the intranet - no problem connecting through internet. When I manage to connect through intranet connection is dropped quite often.No problem connecting via Ethernet cables.
View 1 Replies View RelatedI just replaced my router and EVERY time I do anything the win 7 machine is a pain in the A to get connected again. My two macs (wireless) and my Vista PC (wired), not one single problem but this win 7 thing I can't get to connect. It is wired not wireless.
View 10 Replies View RelatedI have a PC on a crowded network that cannot handle much more bandwidth usage.I am now going to have a tons of transferring to do offsite so I added a second internet line just to deal with the influx of file transfers.I tried a dual WAN setup on my router and the performance was not improved (if it was nobody noticed it) so I said forget that idea, I only need to do these massive transfers from 1 PC so I will just add a second NIC to the machine so that the 1st NIC can maintain local network functionality and the 2nd NIC will be just for internet traffic (sending files up/down to offsite location) Essentially I just need NIC1 for handling local network, connecting to exchange etc. and NIC2 to handle files transfes to offsite location through seconday internet line.So now I have a desktop PC with two NICs. One of them built into the board, the other a pci add on nic. they are both 10/100
On nic1, there is a connection to my network 200.200.1.X which is the internal network for Exchange, local files transfers etc. This is the network i have always had connected and I have no problem connecting to my exchange server etc. (my server is providing dns/dhcp/wins/AD/MSE for the entire network)so I installed a secondary NIC and a secondary network line to the NIC2 on the machine.I set it up with an IP, a SN, a gateway and a DNSI removed the gateway from the 1st NIC.SO then I tried adding a gateway to BOTH of the NICs..This allows me to do EVERYTHING I want, however when i go to whatismyip.com and get a result, the IP it is giving me is NOT either of my static IPs (each network has a seperate internet line with a static IP). Not sure where this IP is coming from, but if i tracert google.com it says I am going out through the primary adaptor.The new IP from whatismyip.com makes no sense to me as it is not either of my static IPs, however it is very close.Would this be a situation where my ISP see's I have 2 gateways defined so it generates a 3rd external IP for some reason? Never heard of this but i am no guru.essentially I just need NIC1 for handling local network, connecting to exchange etc. and NIC2 to handle files transfers to offsite location through seconday internet line.
I have created a virtual server that hosts a ticketing website on it, locally i can access the website when i input my private ip .
Now i want to make it accessible to the agents outside my company , i have change my private ip to a public one, but the problem is still there,i cant connect . i disabled the firewall , just so i would be sure its aint a F.W problem and still , not working .
I have a DIR-655 B1 with FW 2.05.I have different computers/phones connected to internet via the router, both via wifi and ethernet. I have Linux/Windows 7/Android and iOS units. Two weeks ago one of my Windows 7 laptops did not connect to internet and I thought it was the computer. I did a lot of troubleshooting the computer, still did not work at home. When I brought the laptop to a friend it work directly. Now I started to think that it was the router that was the problem. On the status page I can see that the machine got an IP address in the "LAN Computers" part. I can confirm in the laptop that it received the same IP address via DHCP.
I have look around in the menus but can not find anything that should make this computer not connect. I can not even login to the router via this computer.
I have a network problem. My windows 7 machine is not detecting win xp machine whereas win xp machine is detecting win 7 machine. They are in the same workgroup named Home. And the networking system is set to work. I have left the homegroup I was previously in. I enabled file sharing for devices that use 40 bit and 50 bit encryption. On XP I have enabled NetBios over TCP/IP. File sharing is enabled on both computers. I think it's something obvious as both instalations on different computers are really fresh and both windows haven't been tampered with.
View 12 Replies View RelatedI have been working with a friend set up a brand new laptop with Win-7 Home Premium (64 bit) preinstalled. I did the initial set-up at my home, with the machine connected via broadband internet cable to my router. I had absolutely no problem getting it to connect with the internet. Didn't bother to try getting the thing going wirelessly at my location. During the initial setup, I selected "home" as the network type (as opposed to public, etc.)But, when I took the machine to the owner's home, it wouldn't connect via her broadband modem.
Mousing over the network icon in the tray area brings up a tool-tip baloon, "Unidentified Network, No internet access). Opening the Sharing Center shows the network as "Unidentified Network, Public Network. None of the settings accessible to me from that point seemed useful or relevant.I have not been able to find appropriate settings to redefine the network type, etc. Her old machine, which is in the process of dying, is still able to connect, and I'm using the same cable to connect both machines. To top it off, I very recently upgraded my own laptop to Win-7, so I took it over there and it exhibits the same problem. And, if I bring her machine back to my house it connects right up with no fuss at all.
I'm having problems connecting to the VPN. I can access the web portal, but cannot connect SSL VPN on my Mac 10.7, or a virtual windows 7 machines. I've read a lot of forum posts about the mac problem, but for some reason the Windows 7 machine won't connect SSL VPN on windows 7 x64, Chrome, FIreFox.
I tried downloading QuickVPN and set up a user account, but it just sits on the machine at the "Connecting" screen. My primary users will be running Windows 7 Professional x64.
Just got an EA6500 - updated to the latest available firmware.I've attached 2 x WD NAS and 1 x WD via USB to the unit.Everytime AFTER I finished running Time Machine on the MacBookPro (writing to one of the WD NAS), I can no longer login to the router neither from the local IP address nor the cisco cloud connect. The error message that I get (loosely phrased) is: can't connect to Router. Please ensure the router is connected to the internet.
View 2 Replies View RelatedI want to buy the CISCO C819G-4G-G-K9 M2M Router. Studying the characteristics as I always do, I discovered (incredible for me!) that so a sophisticated and expensive router has not the WLAN. Nevertheless, to have the Wi-Fi connection is essential for me.
which is the instrument or machine of Cisco that I must use to connect to the CISCO C819G-4G-G-K9 M2M Router and to have the WLAN 2.4/5 GHz? Will this be possible?
I have a host machine (Laptop, Win 7 Home Premium x64) running Windows 7 Ultimate x64 on VMWare Workstation 9. I've got this system set up for UMDF driver development, because I need a target machine to debug drivers on. However, because I'm developing drivers for Win 7 (x86 and x64), I cannot connect to the virtual machine on via a simple network connection. Connection methods are outlined here.
I have tried a few different pieces of software (mostly Eltima software), and have Google'd every combination of phrases that I can think of. I can't find any information on this anywhere. I don't just need to share data between the machines, I need a more "physical" connection.
Does any know how to do this, or if there's another (preferably more simple) way of doing it?
Modem >> switch router1 >> switch >> computer
same Modem >> same switch >> router2 >> switch >> computer
Now I want to access computers from router 1 to router 2 computers.I opened the router 2 web page and forwarded it. I put service port no. 3389, ip address of a computer of router 2 network. Now I can access the specific computer via remote desktop from router 1 computers using public ip .But what I need is I want to access via mstsc all computers of the router 2 network. using service port, ip address of one computer, I can access only one computer.
My Motorola SBG901 Modem/Router combo has stopped connecting to the internet. I have done all the troubleshooting with Comcast and with Motorola and it is out of warranty, so I will have to purchase a new one.In the mean time, I wanted to use it only as a wireless router connected to my Scientific Atlanta DPC2100R2 modem. Is there anyway to do this? Is there a way to disable the modem in the SBG901? Simply connecting with the ethernet cords has not worked. I connected the DPC2100 to the SBG901 via ethernet cord. My computer was able to pick up a wireless connection but there is no cable connection.
View 1 Replies View RelatedI want to connect my tata photon device to my bsnl wifi modem via a usb portavailable on the bsnl modem. This is to provide a wifi network that i can use to surf the net on my phone.
View 4 Replies View RelatedIs it possible to configure a Westell 6200 DSL modem to accept access via a remote PC? I have a security camera that can be viewed via remote computer access, but I cannot configure my modem to accept a remote access.
View 3 Replies View RelatedI have a cable modem installed to my property but want to use my modem/router to go wireless. The proble is my cable modem output is a RJ45 and the router input is RJ11.
View 10 Replies View RelatedI am looking to permanently reset the default remote management port of the MODEM DPC3825 to something other than 8080. how to PERMANENTLY change the port from 8080? In the web interface under administration I have several times set it to something else other than the defaulted 8080 but when the modem is rebooted or reset, it goes back to the default 8080.
View 4 Replies View RelatedI'm trying to connect to my home laptop from work. The home laptop is connected to DIR-655 router. I set up the internal and external ports to 3389 using both TCP and UDP protocols with the Application as "Remote Desktop". From my work PC I enter the external IP with :3389 and it fails to connect. I have also tried accessing internally which is failing too. All computers are running Windows 7 Home Premium Remote Access is enable on all.
View 1 Replies View RelatedI am in the process of opening an internet cafe. I dont know exactly what a pc server does on the network... or do I really need one? Is the switch/hub sufficent to connect all pcs to the moderm to connect to the internet?
View 1 Replies View Relatedi have a at&t modem and wireless router in one. its the source of my internet and is in my office room and i was wondering if i can use my old westell wireless modem router and hook it up in my bedroom so i can have a better signal for my laptop and use an ethernet cable for other things like the tv and ect
View 1 Replies View RelatedWe are a small business and recently purchased a business server running Windows Server 2008 from the home office.The home office is fine as everything is hardwired on an intranet. We are trying to set up our two other locations to this home server. All machines are running Windows 7 x64 OS trying to connect to the Server. I've tried to setup a VPN connection but keep getting error 800 vpn tunneling failed. The home server is connected to the internet through a router.want to Connect to a Remote Server.
View 2 Replies View Related