Cisco Routers :: RV220W Windows 7 Machine Won't Connect SSL VPN
Mar 9, 2012
I'm having problems connecting to the VPN. I can access the web portal, but cannot connect SSL VPN on my Mac 10.7, or a virtual windows 7 machines. I've read a lot of forum posts about the mac problem, but for some reason the Windows 7 machine won't connect SSL VPN on windows 7 x64, Chrome, FIreFox.
I tried downloading QuickVPN and set up a user account, but it just sits on the machine at the "Connecting" screen. My primary users will be running Windows 7 Professional x64.
View 1 Replies
ADVERTISEMENT
May 15, 2011
I'm relatively new to establishing VPN connections and I'm having one heck of a time getting everything configured.I'm setting up a RV220W at the office and trying to get VPN steup. I've have gotten Quick VPN connections working using the QuickVPN software. I've given up for now on IPsec VPN connactions and will come back to these later.What I'd like to get setup is the SSL VPN connections using the Win7 built in VPN client. Is this even possible? I initially tried to connect to the VPN via the SSL Web access but I cannot get the software/divers to install on any of the 3+ Win7 64 bit machines I tried.So can the SSL VPN on the RV220W be setup to connect to with the Win7 VPN Client using SSTP?
View 6 Replies
View Related
Aug 22, 2011
I have a RV220W (running fw version 1.0.2.4) that i am trying to configure for a client. They are set up on Comcast with 13 available IP's. I should note that this netowrk is now currently running without issue using a Cisco Pix 506e. Unfortunately, the Pix is almost impossible to configure using the GUI now as I have to load a 4-year old version of Java now just to get the PDM to load. But I digress.I've set up the RV using the identical settings as the Pix on bth the LAN and WAN side. When I do, computers on the LAN side can all reach the Internet ok. However, once I enable one-to-one NAT for an internal server, that machine can't send or receive ANY traffic to the WAN side. I've even tried setting access rules enabling ANY traffic in both directions, and that has no effect. Either I'm missing something, or this is just one more bug in this product.
Even though it was a bit of a step down going from the Pix to the RV220W, it was done for the ease of setting up VPN's as I was ready to purchase a second one for a new satellite office opening in a few weeks. It looks like we will be switching vendors on the router side as my faith in Cisco is waning at this point.
View 1 Replies
View Related
Aug 2, 2011
I have a strange error on my home network that I cannot find a solution to.I have an Huawei SmartAX MT882 from TalkTalk acting as a modem connected to a D-Link DSL-G624T acting as a router/switch. Connected to the D-Link I have a Windows 7 Pro machine (64-bit, SP1) and an XP (home i think) machine (sp 2 i think).The SmartAX modem is set up to perform DHCP and DNS relaying and the D-Link has DHCP turned off and DNS relay turned off.The Win7 machine can access the network, get an IP address and access the internet without problems, regardless as to the status of the XP machine.The XP machine can access the network, get an IP address and access the internet with no problems ONLY of the win7 is powered up. When the win7 machine is off, the XP machine seems to drop about 25% of the ping packets between it and the D-Link router and has no internet access (because of this i assume). [code]
View 8 Replies
View Related
Jul 20, 2011
New Win-7 machine set up. I used the printer set-up wizard to install a networked printer in the new machine with absolutely no problem. Proved it would print from that machine.Now, I get a call informing me that her old XP machine, which had been printing to the network printer with no problems, will no longer print.Documents go into the print queue, but they don't get printed.No error messages show up.I did some messing around via remote access, and finally removed the printer with the intention of reinstalling it.Scanning for network printers turned up several redundant instances of the same printer with different names. Some are identified as "invalid" some a "access denied". Bottom line. I can't get any of the selections to install.On the Win-7 machine I did find a window that indicated that the printer is designated as being shared, but I didn't explicitly set it for sharing when I installed it. Also, I somehow got to a window that told me that for printers that were to be shared with other versions of windows I could optionally install drivers to support such machines. Didn't have the driver disk handy and took the window down. Now I can't even find it again.I need sorting this all out.Part of the problem is that out there in "network land" there are redundant remnants of previous installations that are being remembered inappropriately.
View 11 Replies
View Related
Jan 3, 2011
I just replaced my router and EVERY time I do anything the win 7 machine is a pain in the A to get connected again. My two macs (wireless) and my Vista PC (wired), not one single problem but this win 7 thing I can't get to connect. It is wired not wireless.
View 10 Replies
View Related
Mar 29, 2013
I have a DIR-655 B1 with FW 2.05.I have different computers/phones connected to internet via the router, both via wifi and ethernet. I have Linux/Windows 7/Android and iOS units. Two weeks ago one of my Windows 7 laptops did not connect to internet and I thought it was the computer. I did a lot of troubleshooting the computer, still did not work at home. When I brought the laptop to a friend it work directly. Now I started to think that it was the router that was the problem. On the status page I can see that the machine got an IP address in the "LAN Computers" part. I can confirm in the laptop that it received the same IP address via DHCP.
I have look around in the menus but can not find anything that should make this computer not connect. I can not even login to the router via this computer.
View 7 Replies
View Related
Jan 12, 2013
I am trying to set up a Synology VPN server thru a cisco RV220W and cannot get a windows 7 VPN client to connect to it. Access rule was created on RV220W to port forward 1723 and also made sure the same port was forwarded on the built in router on the Synology NAS box, running DSM4.1 and made sure VPN server was up and running. IP address of synology NAS is 192.168.1.250, mask of 255.255.255.0. DNSgateway is 192.168.1.1. Only running PPTP at this time.
When I run the windows 7 VPN client, I try to connect to the external internet addres:1723, make surePPTP is the only protocol and use a DNS of 192.168.1.1. When I try connect, I get an 868 error which says "error 868: The remote connection was not made because the name of the remote access server could not resolve."
When I try to ping port 1723, I do not get a response which leads me to believe that the issue is the router and not the NAS box. HTTP, HTTPS and FTP ports work fine.
View 6 Replies
View Related
Nov 15, 2012
I have been working with a friend set up a brand new laptop with Win-7 Home Premium (64 bit) preinstalled. I did the initial set-up at my home, with the machine connected via broadband internet cable to my router. I had absolutely no problem getting it to connect with the internet. Didn't bother to try getting the thing going wirelessly at my location. During the initial setup, I selected "home" as the network type (as opposed to public, etc.)But, when I took the machine to the owner's home, it wouldn't connect via her broadband modem.
Mousing over the network icon in the tray area brings up a tool-tip baloon, "Unidentified Network, No internet access). Opening the Sharing Center shows the network as "Unidentified Network, Public Network. None of the settings accessible to me from that point seemed useful or relevant.I have not been able to find appropriate settings to redefine the network type, etc. Her old machine, which is in the process of dying, is still able to connect, and I'm using the same cable to connect both machines. To top it off, I very recently upgraded my own laptop to Win-7, so I took it over there and it exhibits the same problem. And, if I bring her machine back to my house it connects right up with no fuss at all.
View 14 Replies
View Related
Oct 9, 2012
I try to connect to RV220W with windows 7 client but I fail : error 789. I compare again and again pre shared key, but it doesn't change anything. How to connect to RV220W with IPsec client ?
View 4 Replies
View Related
Dec 12, 2011
get a status on Mac Lion and/or Windows 7 64-bit SSL VPN support for the RV220W? QuickVPN (for Windows 7 64-bit users) and IPSecuritas (for Mac Lion users) are our current workarounds, but for folks that use/own their own equipment we prefer SSL VPN. This is why we retired our WRVS4400N v2 for the RV220W.
View 3 Replies
View Related
May 15, 2013
I have a host machine (Laptop, Win 7 Home Premium x64) running Windows 7 Ultimate x64 on VMWare Workstation 9. I've got this system set up for UMDF driver development, because I need a target machine to debug drivers on. However, because I'm developing drivers for Win 7 (x86 and x64), I cannot connect to the virtual machine on via a simple network connection. Connection methods are outlined here.
I have tried a few different pieces of software (mostly Eltima software), and have Google'd every combination of phrases that I can think of. I can't find any information on this anywhere. I don't just need to share data between the machines, I need a more "physical" connection.
Does any know how to do this, or if there's another (preferably more simple) way of doing it?
View 1 Replies
View Related
Apr 29, 2012
I have a network problem. My windows 7 machine is not detecting win xp machine whereas win xp machine is detecting win 7 machine. They are in the same workgroup named Home. And the networking system is set to work. I have left the homegroup I was previously in. I enabled file sharing for devices that use 40 bit and 50 bit encryption. On XP I have enabled NetBios over TCP/IP. File sharing is enabled on both computers. I think it's something obvious as both instalations on different computers are really fresh and both windows haven't been tampered with.
View 12 Replies
View Related
Jul 18, 2011
I have an Cisco RV220W and I can’t connect to web interface. The router is new, I receive the error in Mozilla: Cannot communicate securely with peer: no common encryption algorithm(s). I used also Internet Explorer, Chrome , I tried to disable SSL 3.0, TLS 1.0 but the problem persist. The PC obtained IP address from the router, I have ping on it ,also the SSID is up with open network I reset to factory default but the problem persist.
View 2 Replies
View Related
Dec 24, 2012
I just got a cisco RV220W and I try to connect it on my wireless network as client, but it doesn't work.
View 1 Replies
View Related
Feb 7, 2012
I just got myself a Cisco RV220W, connected my laptop to configure it. I receive an IP adress by DHCP (192.168.1.x) and can ping the router (192.168.1.1). However, when I try to connect to the router by the web interface, I receive this message in my browser (Chrome):
The webpage at https://192.168.1.1/ might be temporarily down or it may have moved permanently to a new web address. Error 113 (net::ERR_SSL_VERSION_OR_CIPHER_MISMATCH): Unknown error.
In FireFox: Secure Connection Failed An error occurred during a connection to 192.168.1.1. Cannot communicate securely with peer: no common encryption algorithm(s). (Error code: ssl_error_no_cypher_overlap)
In IE9: I get no error message, the page never loads
Is it DoA or how to get connected to the web interface?
View 4 Replies
View Related
Sep 16, 2012
Or rather, it will connect within the first few minutes after a router reboot, but eventually is kept from connecting.
All settings look good. Upgraded from 1.0.3.5. Prior to upgrade, this was not problem.
View 3 Replies
View Related
Mar 30, 2011
When my RV220W used firmware 1.0.0.26 the PPPoE login to AT&T/Bellsouth DSL worked just fine. I upgraded to version 1.0.1.0 and now it won't connect. The PPPoE connection still works from my prior Linksys router so there wasn't a change on the ISP side. Has something changed in firmware 1.0.1.0 that requires a change to the PPPoE profile?
DSL Modem is a Motorola Netopia (model 2210-02) with firmware 7.7.3r10 operating in Bridged mode.
View 26 Replies
View Related
May 4, 2012
I am trying to link a Windows 7 machine with a laptop running Windows XP. The workgroup on both computers is the same. On the Win7 machine, I have a couple of folders set to be shared. The first is the C Drive and the share name is C-drive. The second is Quickbooks that I have named Quickbooks. On the XP machine, I went to map network drive and in the blank typed \Remote1C-drive. It asked for username and password and just like that we were connected. But I can't see all of the files on this drive. I don't even see all of the folders - one of which is Quickbooks. So I tried \Remote1Quickbooks and Windows XP couldn't find that path even though I'm positive that folder is shared on Win7. So no matter what I try, I can't see this folder on the XP machine, I even tried copying this folder to other locations around the computer and setting up shares in hope that something would work, but it never did. So I went back to the C Drive share on the XP machine. I tried to go in reverse, creating a file and putting it on the root of the c drive (I did this on the XP machine, but the file should have actually been located on the Win7 machine. When I check Win7, the file didn't exist. So I tried the other way. I right clicked on the c drive in Win7 and created a new bitmap image file. Back to the XP laptop, that file doesn't show. But if I look at the c-drive on Win7 from the xp machine, I see several other folders and some of them like Program Files contains actual files. But some of them are just empty such as \Remote1C.
View 6 Replies
View Related
Feb 28, 2013
I have two Win XP machines and a Linux Mint. I can access the shared folders of my Win machines from Linux but Win machines, in the Workgroup, shows the Linux connection as "MyMint server (Samba, Linux Mint)(MyMint)" but I can't access files on that machine. "MyMint" is the computer name.
View 3 Replies
View Related
Jun 29, 2011
I have a Windows 7 machine connected to my TV set. I want this machine to act as much as an appliance and as little as a PC as possible. To that end, I want it to be able to access my NAS disk, but not the Internet. Internet = annoying update messages (think Adobe), viruses, crap.I don't know if this is a setting that I can do in Win7 or in the DI-Link AirPlusG router thing
View 2 Replies
View Related
Oct 8, 2012
My home network, consists of a bunch of Win 7 computers and 2 XP machines. One XP machine is a netbook, it's rarely on and presents no issues.Here's the problem I'm having with the other XP machine:-My Win XP PC does not show up in the list of networked computers on any of the other machines on my home network.-But I can still access the shared folders by going to start and typing in \computer name.Win 7 will open a folder containing all the shared folders and I have no problem accessing (and modifying) any of its contents.-I also can access the PC via a VNC client set up on another machine and even have ports properly configured to access it from out of the house-I use this PC as a server to stream music to my iPhone via subsonic. No problem here either-I can access all the other computers from the XP machine in question.Since I can still get to the files this wouldn't be a big deal, except:-I can't map a network drive to the XP machine from the other PCs and I need to-I have an HTPC computer whose software can't find this XP machine because it's not there
View 1 Replies
View Related
Feb 28, 2011
This is what I have as a setup:BT Home Hub wifi routerPC with Windows 7 Home premium connected via ethernetMacbook Pro with OSX10.6 connected via wifiIt feels like i've tried everything to get this working. As far as I can see the settings are all ok but I've noticed that I can't ping the PC from the mac although I can ping with success the other way around tried traceroute from the macbook and it gives me this so it is able to see it somehow...Code:traceroute to 192.168.1.66 (192.168.1.66), 64 hops max, 52 byte packets 1 alistair-pc.home (192.168.1.66) 1.724 ms * 1.151 msNot sure where to go from here. I think discovering that ping is failing is a good start to diagnose.
View 19 Replies
View Related
Aug 5, 2012
I am using ACS 5.3. I have succesfully configured Machine Authentication for a Windows 7 laptop using EAP-TLS. The ACS is configured with an Active Directory external identity store where the Windows 7 laptop is configured as part of the domain. I'm pretty sure that the ACS was using the AD to authenticate the laptop's name because at first the authentications were failing because I had the Certificate Authentication Profile configured to look at an attribute in the client certificate that was empty. When I fixed that, the authentication suceeded.
I started doing some failure testing so I disconnected the Domain Controller from the network. Sure enough, the ACS shows the Active Directory external store is in the Disconnected State.I then went to my Windows 7 laptop and disconnected the wireless connection and connected it again, expecting it to fail because the AD is down. But it succeeded! My Win 7 laptop is accessing the network wirelessly through a Lightweight AP and 5508 WLC. The WLAN Session Timeout was set for 30 minutes. So even with the AD disconnected, every 30 minutes, the ACS log showed a successful EAP-TLS authentication. I then changed the WLAN Session Timeout to 2 hours 10 minutes. Same thing, every 2 hours 10 minutes, a succesfull EAP-TLS authentication. I really don't know how the authentications are succeeding when the AD is not even connected. Is there a cache in the ACS?
View 7 Replies
View Related
Oct 9, 2012
I have 2 windows 7 laptops running wireless and a windows xp desktop connected by wire to linksys router. The desktop has no problems accessing the other computers.One laptop has no problem accessing the other computers on the network. The other laptop has trouble with the windows XP machine. It asks for login info, which there is none. I tested with the laptop wired and it seemed to access it normally. Also, it is not consistant. It sometimes works and sometimes doesn't. I have gone through other posts and made sure that password requirement was off
View 2 Replies
View Related
Jan 23, 2011
I have an XP and a Windows 7 on network (put them in the same Group). I can see the Win7 machine on the XP computer,, accesss files from it. But the XP computer does not show up on Windows7. File sharing was enabled in both. In another post TerryNet asked for the following info (nbtstat -n and IPCONFIG /ALL) from both machines. I thought I will post them assuming I have similar issue as in the previous post. here are the details of these two commands from the two machines.
Windows 7 Machine
==============
C:UsersArun>nbtstat -n
Local Area Connection:
[Code]......
View 5 Replies
View Related
Feb 9, 2012
I have a Win 7 machine with Win SBS 2011 in my office and an iMac. The Win machine is being setup for Exchange 2010. My problem is this: I can't Remote Desktop in from my iMac into the Win machine, but CAN when outside the network.The Win7 machine has a static IP, the iMac a dynamic. When I access the internal part of my router I can only see my iMac. I get a "can't connect to win-based machine" error when I try to Remote Connect.The only thing I can think is that using the same gateway is somehow messing things up? I've had two techs try to figure this out and they're both stumped.I was maybe thinking that since both comps are going out the same gateway that I should try anc configure the iMac to try and RDC on a different port, since maybe the iMac is listening on 3389 and sending the RDC back to itself?
View 4 Replies
View Related
Oct 28, 2011
I have 6 computers here at the office, 5 of which are on XP Pro SP3 and the my main computer running Win 7 Pro SP1. Well 3 of the 5 XP machines can access a shared folder on the 7 machine 1 of the other XP machines can see the 7 computer on the network but can not access the shared folder and the final XP machine can not see the 7 computer at all
View 19 Replies
View Related
Nov 6, 2012
We're installing LMS 3.2 on a VM machine running Windows 2008 Standard edition (64 Bit).
You cannot install CiscoWorks LMS 3.2 application(s) on an unsupported operating system or when Terminal Services is running on the supported Windows 2003 Server Standard Edition, Windows 2008 Server Enterprise Edition,Windows 2003 Server Enterprise edition, and Windows 2003 R2 Server Platforms. The setup program will exit when you click ok.You must either upgrade the operating system on the server to a supported version or install LMS 3.2 application(s) on another server that runs a supported operating system.
I've disabled all RDP sessions and ANTI-Virus Software.The documentation states 2008 server Standard (64 bit) is supported.
View 3 Replies
View Related
Dec 10, 2012
i am also facing the same problem with lenovo machine in windows 8 ,i have updated WLAN drivers ,even WLAN switch is on ,but still not able to diagnose the issue?
View 1 Replies
View Related
Mar 30, 2011
How do i download updated drivers for windows xp for another machine. I mean i have a 16GB stick .. but i have Dell computer that i reinstalled Windows Xp on it and i can't get onto the internet?
View 2 Replies
View Related
Dec 10, 2012
i am also facing the same problem with lenovo machine in windows 8 ,i have updated WLAN drivers ,even WLAN switch is on ,but still not able to dignose the issue
View 1 Replies
View Related
Jan 11, 2011
Windows 2003 R2 Server machine cannot be pinged, not XP? I'm running a highly modified version of Windows 2003 R2 to make use of an old PC. It connects beautifully to a Verizon router (I can browse the Internet), but I can't figure out how to share folders on my network. I have a Macbook and Win7 machine and both cannot see this old PC on the network. I have tried to ping the old PC from my Win7 machine, and it will only timeout. Below is some relevant output from the old PC
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:Documents and SettingsAdministrator>nbtstat -n
Wireless Network Connection:
Node IpAddress: [192.168.1.6] Scope Id: []
[code]...
View 7 Replies
View Related
