I have two Win XP machines and a Linux Mint. I can access the shared folders of my Win machines from Linux but Win machines, in the Workgroup, shows the Linux connection as "MyMint server (Samba, Linux Mint)(MyMint)" but I can't access files on that machine. "MyMint" is the computer name.
View 3 Replieshow to get mac address of linux machine using vb6 programming
View 1 Replies View RelatedHow to make linux machine as access point
View 1 Replies View RelatedI am monitoring 2 or more source interfaces which are running 1G traffic on each interface. Destination is 10G interface.There are 2 kinds of traffic running through the source interfaces: icmp and regular IP traffic. I am only interested in capturing icmp traffic. How can I achieve my goal?I don’t have any vlan traffic at all. Router is c6500.
source (1G) destination (10G)
------------------------- Router --------------------------------------Linux
|
| source (1G)
|
|
I'm trying to set up a VPN tunnel between a Linux machine and a RVS4000 at a remote site (served via satellite connection). After many efforts, I finally succeeded (based on Openswan). However, while PINGing is OK, big packets (from the RVS4000 LAN to the Linux box) arrive corrupted.
I lowered the WAN MTU, with no success. What finally did the trick is to lower the MTU at the RVS4000 LAN interface. Since this is not possible via the Web I/F, I did it via telnet ("ifconfig eth0 mtu 1400"). However, this change is lost after router reboot. How can I make the LAN MTU setting permanent?
I have a strange error on my home network that I cannot find a solution to.I have an Huawei SmartAX MT882 from TalkTalk acting as a modem connected to a D-Link DSL-G624T acting as a router/switch. Connected to the D-Link I have a Windows 7 Pro machine (64-bit, SP1) and an XP (home i think) machine (sp 2 i think).The SmartAX modem is set up to perform DHCP and DNS relaying and the D-Link has DHCP turned off and DNS relay turned off.The Win7 machine can access the network, get an IP address and access the internet without problems, regardless as to the status of the XP machine.The XP machine can access the network, get an IP address and access the internet with no problems ONLY of the win7 is powered up. When the win7 machine is off, the XP machine seems to drop about 25% of the ping packets between it and the D-Link router and has no internet access (because of this i assume). [code]
View 8 Replies View RelatedNew Win-7 machine set up. I used the printer set-up wizard to install a networked printer in the new machine with absolutely no problem. Proved it would print from that machine.Now, I get a call informing me that her old XP machine, which had been printing to the network printer with no problems, will no longer print.Documents go into the print queue, but they don't get printed.No error messages show up.I did some messing around via remote access, and finally removed the printer with the intention of reinstalling it.Scanning for network printers turned up several redundant instances of the same printer with different names. Some are identified as "invalid" some a "access denied". Bottom line. I can't get any of the selections to install.On the Win-7 machine I did find a window that indicated that the printer is designated as being shared, but I didn't explicitly set it for sharing when I installed it. Also, I somehow got to a window that told me that for printers that were to be shared with other versions of windows I could optionally install drivers to support such machines. Didn't have the driver disk handy and took the window down. Now I can't even find it again.I need sorting this all out.Part of the problem is that out there in "network land" there are redundant remnants of previous installations that are being remembered inappropriately.
View 11 Replies View RelatedI have a network problem. My windows 7 machine is not detecting win xp machine whereas win xp machine is detecting win 7 machine. They are in the same workgroup named Home. And the networking system is set to work. I have left the homegroup I was previously in. I enabled file sharing for devices that use 40 bit and 50 bit encryption. On XP I have enabled NetBios over TCP/IP. File sharing is enabled on both computers. I think it's something obvious as both instalations on different computers are really fresh and both windows haven't been tampered with.
View 12 Replies View RelatedHoy-hoyIs there exist any tool like iwconfig (linux tool, I think), but working in windows XP?civ-civ
View 3 Replies View RelatedI have a Canon LBP2900 printer. I have connected the printer with my desktop PC running windows xp and shared it. I have Ubuntu in my laptop and connected to the local network. Is there any easy way to print from ubuntu?
View 2 Replies View RelatedHow to access files shared on a windows pc from a linux xubuntu pc? i tried to use the "Gigolo" app but it didn't do anything pyneighborhood saw the computers on the network but didn't able to go into the shared folders...
View 4 Replies View RelatedI need to know in what operating systems Windows or Linux I can install the WCS WCS-PLUS-UPG-100. [code]
View 8 Replies View RelatedWhat I need is a net gear n300 wireless usb adapter driver that works for linux, windows 98, windows 982nd edition and windows xp because i'm switching this computer to windows xp and i need a solid internet connection throughout the entire process or a way to switch my computer to windows xp with out the internet conection like a download of the windows xp instalation file.
View 2 Replies View RelatedI have between 8 and 10 computers on my home LAN. They are split between the default workgroup name 'WORKGROUP' and the name I have assigned to my home LAN.There is a mixture of Win XP, Win 7 32 & 64 and various levels of Ubuntu.
After 6 long days of trying I have made not one step forward in allowing file/printer sharing.The Windows machines are all running Comodo Internet Security, on one of which I have created my idea of a set of rules to allow file/print sharing.The Windows XP machine, with a user created set of firewall rules,can see no computers on the network (using My Network Places), aside from itself and the shares created on it.It cannot see the computers which are not in the workgroup.
The most common error message this computer generates is 'network path not found'. A win 7 32 bit computer, in the workgroup, can see all other computers that are in the workgroup, including itself, twice.It cannot access any shares on the Linux computers. It is able to access shares on the Windows XP computer.ufw Firewall is installed and enabled on one Linux machine and has a vaguely similar set of file/print sharing rules.That machine can see nothing at the Network place.A couple of hours ago it could see the machines that are NOT in my workgroup but could not see the machines that are!
Another linux computer can see the two workgroups (named and default) within the windows network, but cannot browse either workgroup. The most common error message from sharing attempts with the Linux machines is 'unable to mount location. Failed to retrieve share list from server'.Right now I am reduced to transferring USB sticks between adjacent computers....
I recently acquired a 2509 router that I plan to use as a serial device router. My question is, how do you create the virtual com ports on Windows and Linux machines to point to the TCP address:ports in the 2509 router? Is there software or drivers that do this? Or something third-party?
View 12 Replies View RelatedI am trying to link a Windows 7 machine with a laptop running Windows XP. The workgroup on both computers is the same. On the Win7 machine, I have a couple of folders set to be shared. The first is the C Drive and the share name is C-drive. The second is Quickbooks that I have named Quickbooks. On the XP machine, I went to map network drive and in the blank typed \Remote1C-drive. It asked for username and password and just like that we were connected. But I can't see all of the files on this drive. I don't even see all of the folders - one of which is Quickbooks. So I tried \Remote1Quickbooks and Windows XP couldn't find that path even though I'm positive that folder is shared on Win7. So no matter what I try, I can't see this folder on the XP machine, I even tried copying this folder to other locations around the computer and setting up shares in hope that something would work, but it never did. So I went back to the C Drive share on the XP machine. I tried to go in reverse, creating a file and putting it on the root of the c drive (I did this on the XP machine, but the file should have actually been located on the Win7 machine. When I check Win7, the file didn't exist. So I tried the other way. I right clicked on the c drive in Win7 and created a new bitmap image file. Back to the XP laptop, that file doesn't show. But if I look at the c-drive on Win7 from the xp machine, I see several other folders and some of them like Program Files contains actual files. But some of them are just empty such as \Remote1C.
View 6 Replies View RelatedI have a Windows 7 machine connected to my TV set. I want this machine to act as much as an appliance and as little as a PC as possible. To that end, I want it to be able to access my NAS disk, but not the Internet. Internet = annoying update messages (think Adobe), viruses, crap.I don't know if this is a setting that I can do in Win7 or in the DI-Link AirPlusG router thing
View 2 Replies View RelatedMy home network, consists of a bunch of Win 7 computers and 2 XP machines. One XP machine is a netbook, it's rarely on and presents no issues.Here's the problem I'm having with the other XP machine:-My Win XP PC does not show up in the list of networked computers on any of the other machines on my home network.-But I can still access the shared folders by going to start and typing in \computer name.Win 7 will open a folder containing all the shared folders and I have no problem accessing (and modifying) any of its contents.-I also can access the PC via a VNC client set up on another machine and even have ports properly configured to access it from out of the house-I use this PC as a server to stream music to my iPhone via subsonic. No problem here either-I can access all the other computers from the XP machine in question.Since I can still get to the files this wouldn't be a big deal, except:-I can't map a network drive to the XP machine from the other PCs and I need to-I have an HTPC computer whose software can't find this XP machine because it's not there
View 1 Replies View RelatedThis is what I have as a setup:BT Home Hub wifi routerPC with Windows 7 Home premium connected via ethernetMacbook Pro with OSX10.6 connected via wifiIt feels like i've tried everything to get this working. As far as I can see the settings are all ok but I've noticed that I can't ping the PC from the mac although I can ping with success the other way around tried traceroute from the macbook and it gives me this so it is able to see it somehow...Code:traceroute to 192.168.1.66 (192.168.1.66), 64 hops max, 52 byte packets 1 alistair-pc.home (192.168.1.66) 1.724 ms * 1.151 msNot sure where to go from here. I think discovering that ping is failing is a good start to diagnose.
View 19 Replies View RelatedI have 2 windows 7 laptops running wireless and a windows xp desktop connected by wire to linksys router. The desktop has no problems accessing the other computers.One laptop has no problem accessing the other computers on the network. The other laptop has trouble with the windows XP machine. It asks for login info, which there is none. I tested with the laptop wired and it seemed to access it normally. Also, it is not consistant. It sometimes works and sometimes doesn't. I have gone through other posts and made sure that password requirement was off
View 2 Replies View RelatedI just replaced my router and EVERY time I do anything the win 7 machine is a pain in the A to get connected again. My two macs (wireless) and my Vista PC (wired), not one single problem but this win 7 thing I can't get to connect. It is wired not wireless.
View 10 Replies View RelatedI have an XP and a Windows 7 on network (put them in the same Group). I can see the Win7 machine on the XP computer,, accesss files from it. But the XP computer does not show up on Windows7. File sharing was enabled in both. In another post TerryNet asked for the following info (nbtstat -n and IPCONFIG /ALL) from both machines. I thought I will post them assuming I have similar issue as in the previous post. here are the details of these two commands from the two machines.
Windows 7 Machine
==============
C:UsersArun>nbtstat -n
Local Area Connection:
[Code]......
I have a Win 7 machine with Win SBS 2011 in my office and an iMac. The Win machine is being setup for Exchange 2010. My problem is this: I can't Remote Desktop in from my iMac into the Win machine, but CAN when outside the network.The Win7 machine has a static IP, the iMac a dynamic. When I access the internal part of my router I can only see my iMac. I get a "can't connect to win-based machine" error when I try to Remote Connect.The only thing I can think is that using the same gateway is somehow messing things up? I've had two techs try to figure this out and they're both stumped.I was maybe thinking that since both comps are going out the same gateway that I should try anc configure the iMac to try and RDC on a different port, since maybe the iMac is listening on 3389 and sending the RDC back to itself?
View 4 Replies View RelatedI have 6 computers here at the office, 5 of which are on XP Pro SP3 and the my main computer running Win 7 Pro SP1. Well 3 of the 5 XP machines can access a shared folder on the 7 machine 1 of the other XP machines can see the 7 computer on the network but can not access the shared folder and the final XP machine can not see the 7 computer at all
View 19 Replies View RelatedI have a DIR-655 B1 with FW 2.05.I have different computers/phones connected to internet via the router, both via wifi and ethernet. I have Linux/Windows 7/Android and iOS units. Two weeks ago one of my Windows 7 laptops did not connect to internet and I thought it was the computer. I did a lot of troubleshooting the computer, still did not work at home. When I brought the laptop to a friend it work directly. Now I started to think that it was the router that was the problem. On the status page I can see that the machine got an IP address in the "LAN Computers" part. I can confirm in the laptop that it received the same IP address via DHCP.
I have look around in the menus but can not find anything that should make this computer not connect. I can not even login to the router via this computer.
i am also facing the same problem with lenovo machine in windows 8 ,i have updated WLAN drivers ,even WLAN switch is on ,but still not able to diagnose the issue?
View 1 Replies View RelatedI have been working with a friend set up a brand new laptop with Win-7 Home Premium (64 bit) preinstalled. I did the initial set-up at my home, with the machine connected via broadband internet cable to my router. I had absolutely no problem getting it to connect with the internet. Didn't bother to try getting the thing going wirelessly at my location. During the initial setup, I selected "home" as the network type (as opposed to public, etc.)But, when I took the machine to the owner's home, it wouldn't connect via her broadband modem.
Mousing over the network icon in the tray area brings up a tool-tip baloon, "Unidentified Network, No internet access). Opening the Sharing Center shows the network as "Unidentified Network, Public Network. None of the settings accessible to me from that point seemed useful or relevant.I have not been able to find appropriate settings to redefine the network type, etc. Her old machine, which is in the process of dying, is still able to connect, and I'm using the same cable to connect both machines. To top it off, I very recently upgraded my own laptop to Win-7, so I took it over there and it exhibits the same problem. And, if I bring her machine back to my house it connects right up with no fuss at all.
How do i download updated drivers for windows xp for another machine. I mean i have a 16GB stick .. but i have Dell computer that i reinstalled Windows Xp on it and i can't get onto the internet?
View 2 Replies View Relatedi am also facing the same problem with lenovo machine in windows 8 ,i have updated WLAN drivers ,even WLAN switch is on ,but still not able to dignose the issue
View 1 Replies View RelatedWindows 2003 R2 Server machine cannot be pinged, not XP? I'm running a highly modified version of Windows 2003 R2 to make use of an old PC. It connects beautifully to a Verizon router (I can browse the Internet), but I can't figure out how to share folders on my network. I have a Macbook and Win7 machine and both cannot see this old PC on the network. I have tried to ping the old PC from my Win7 machine, and it will only timeout. Below is some relevant output from the old PC
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:Documents and SettingsAdministrator>nbtstat -n
Wireless Network Connection:
Node IpAddress: [192.168.1.6] Scope Id: []
[code]...
I have a Windows 7 PC and a Windows XP PC that I’m sharing files on. All was well for a while, but I’ve started to lose connectivity between computers when one goes into sleep mode. Not sure at this point if it’s the XP machine or the Windows 7 Machine that’s causing the problem.
View 3 Replies View RelatedI am using ACS 5.3. I have succesfully configured Machine Authentication for a Windows 7 laptop using EAP-TLS. The ACS is configured with an Active Directory external identity store where the Windows 7 laptop is configured as part of the domain. I'm pretty sure that the ACS was using the AD to authenticate the laptop's name because at first the authentications were failing because I had the Certificate Authentication Profile configured to look at an attribute in the client certificate that was empty. When I fixed that, the authentication suceeded.
I started doing some failure testing so I disconnected the Domain Controller from the network. Sure enough, the ACS shows the Active Directory external store is in the Disconnected State.I then went to my Windows 7 laptop and disconnected the wireless connection and connected it again, expecting it to fail because the AD is down. But it succeeded! My Win 7 laptop is accessing the network wirelessly through a Lightweight AP and 5508 WLC. The WLAN Session Timeout was set for 30 minutes. So even with the AD disconnected, every 30 minutes, the ACS log showed a successful EAP-TLS authentication. I then changed the WLAN Session Timeout to 2 hours 10 minutes. Same thing, every 2 hours 10 minutes, a succesfull EAP-TLS authentication. I really don't know how the authentications are succeeding when the AD is not even connected. Is there a cache in the ACS?
I've been running WHSV1 for at least 3 years now without any problems. Upgraded my client to Windows 7 and stream movies etc.. no issues at all. I gave "guest" account enabled with full access on the WHS server machine and just mapped theshares on my laptop..Anyway, I did some updates on my windows7 laptop and now the computer can no longer see the "server" machine."Server" appears in "other devices" in windows explorer but I can't do anything with it. Just takes me to a page server.com by godaddy.Also, I can no longer use RDP from within my own network! Says the SERVER machine does not exist.I can log in to the server just fine using logmein.
Also, made sure the windows machine has the network that it joined set to "home." I've had a similar problem years ago when I used to use zone alarm but I don't know how to fix it now. It's as if a firewall is blocking it or something.