Make Linux Machine As Access Point?
Jul 9, 2011How to make linux machine as access point
View 1 Replies
ADVERTISEMENT
Can't See Linux Machine Through Windows XP?
Feb 28, 2013I have two Win XP machines and a Linux Mint. I can access the shared folders of my Win machines from Linux but Win machines, in the Workgroup, shows the Linux connection as "MyMint server (Samba, Linux Mint)(MyMint)" but I can't access files on that machine. "MyMint" is the computer name.
View 3 Replies View RelatedGet Mac Address Of Linux Machine Using Vb6 Programming?
Jul 5, 2011how to get mac address of linux machine using vb6 programming
View 1 Replies View RelatedCisco WAN :: C6500 / Linux Machine Setup When Capturing Traffic?
Dec 30, 2011I am monitoring 2 or more source interfaces which are running 1G traffic on each interface. Destination is 10G interface.There are 2 kinds of traffic running through the source interfaces: icmp and regular IP traffic. I am only interested in capturing icmp traffic. How can I achieve my goal?I don’t have any vlan traffic at all. Router is c6500.
source (1G) destination (10G)
------------------------- Router --------------------------------------Linux
|
| source (1G)
|
|
How To Make Router Wireless Access Point
May 22, 2011I am using a windows vista laptop with a wrt160n linksys router. I want to make it an access point without using wires.
View 3 Replies View RelatedMake Router WRT54G As An Access Point?
Apr 22, 2011step by step to make my router WRT54G as an access point?
View 1 Replies View RelatedCisco Routers :: Setup VPN Tunnel Between Linux Machine And RVS4000 At A Remote Site?
Jul 21, 2011I'm trying to set up a VPN tunnel between a Linux machine and a RVS4000 at a remote site (served via satellite connection). After many efforts, I finally succeeded (based on Openswan). However, while PINGing is OK, big packets (from the RVS4000 LAN to the Linux box) arrive corrupted.
I lowered the WAN MTU, with no success. What finally did the trick is to lower the MTU at the RVS4000 LAN interface. Since this is not possible via the Web I/F, I did it via telnet ("ifconfig eth0 mtu 1400"). However, this change is lost after router reboot. How can I make the LAN MTU setting permanent?
Make Wireless Access Point Broadcast New Secured N Network?
May 28, 2011I had an old G router that had an unsecured network. It died and I replaced it with an N router and installed a secured network. I have a cable modem with wires that goes to the router. From the router, I have CAT 4 wires going to several access points around the house. Into one of these acess points, I have pluged in a wireless access point that broadcasts wirelessly---unfortunately, it is broadcasting the old unsecured network. How can I make the wireless access point broadcast the new secured N network?
View 6 Replies View RelatedUsing Xp As Wifi Access Point To Make Bberry Internet Connection Available?
Apr 24, 2011I have a Windows XP SP3 desktop with a NetGear WG111v2 USB wireless adapter and I get my internet connection from my Blackberry 8320 (I connect my BBerry device to my PC and start Blackberry Desktop Manager and choose to use internet access of my phone for my PC). I want to be able to make this internet connection available to other devices on the network wirelesly. I also have a nook ebook reader and a laptop which I would occassionaly like to connect to internet via the connection described above. How to go about making Blackberry internet connection shared accross the network? I tried Internet Connection Sharing Wizard, but I ended up with nothing to show up for.
View 3 Replies View RelatedLinksys Wireless Router :: Make WRT54G An Access Point Only?
Nov 25, 2007I need to make my WRT54G an access point only. I tried information contained on Linksys site, but I can't seem to get it to work.
View 9 Replies View RelatedLinksys Cable / DSL :: Make A Bridge With WAG54G2 And Another Access Point?
Dec 26, 2012Is it possile make a bridge with my WAG54G2 and another Access Point ?
View 1 Replies View RelatedLinksys Access Point :: BEFSR41 - How To Make Network Secure
Jul 20, 2008I have been using a Dell desktop for many years now as my primary computer. Recently I received a brand new Sony VAIO laptop. So as to make the laptop connect to the internet wirelessly, I hooked up a Linksys router (Linksys model # BEFSR41) and a Linksys access point (Linksys model # WAP200). Everything is working flawlessly except for one big problem. My network is listed as "unsecure". What steps do I have to take to make my network "secure"? The operating software in the laptop is Windows Vista. How to make my network secure. Let me just mention that the laptop and desktop are home computers and are both primarily used for "fun and leisure". No business "stuff"
View 9 Replies View RelatedLinksys Wireless Router :: Make WRT160N Access Point With E3000?
Jul 24, 2011I want to use my WRT160n in my room to connect all my devices (Xbox, playstation 3, and 3 laptops) I hardwired the E3000 from the room downstairs thats connected to everything else.
View 2 Replies View RelatedLinksys Cable / DSL :: WAG54G How To Setup Access Point And Make It Work With DSL
Mar 15, 2009i'm facing a big problem with my access point WAG54G ver 2.0 ,i just bought it from 2 days but i find alot of problems when i start using it ,i have read all the user guide and the quick install to see how to setup the access point and make it work with my adsl.i have configured all things right using PPPOE and putting my user name and password and then save settings then go to the status and press on connect , but it don't connect with me just i find connecting and adsl link : Down and still making connecting and nothing after that and my adsl led is off haven't any colors ,and when i get again to basic setup i found the password that i put it in the ppoe login is too long , not my password i tried to see what is this password and recover the hidden i found it " d6nw5vlx2pc7st9m ".i don't know what is the problem i tried alot of times to change setting and also the same problem.i think that it's a frim ware problem and i tried install a new updated frimware but everytime trying to install it get installing and suddenly stoped and white page appeard and all the access point is stopping and when restart it the ac power.
View 3 Replies View RelatedCisco Wireless :: LAP1131AG - Change Firmware To Make Normal Access Point
Apr 1, 2012I brought a LAP1131AG, only later found out that it can only be used with a controller.Is there any way I could change the firmware to make it a normall Access Point?
View 5 Replies View RelatedCisco Wireless :: 3502p - Access Point Support MESH And Point-to-Point Bridging?
Apr 16, 2013I need to know if 3502p with outdoor antennas supports Point-to-Point Wireless Bridging?
View 6 Replies View RelatedCisco Wireless :: Point To Point Access Point 1262 Bridging
Feb 27, 2013How would I bridge a wireless connection with a distance of 400 feet? Would twoAP1262N-A-K9 be able to make this happen? Or is there another wireless bridge that you all can think of?I would be connecting one AP1262 of off a 3750g switch and at the far end (400 ft aproximately) another AP1262N-A-K9.
View 12 Replies View RelatedLinksys Access Point :: Connect And Configure WAP54G Access Point To New Cable Modem?
Nov 1, 2012How do I connect and configure my WAP54G wireless access point to my new Cable Modem? I have it connected to the modem but I cannot access it to configure it. It appears to be working but before I got the cable modem I had it connected to a router and it was set-up with a static IP address. With my new ISP, I no longer have a static IP address so I am trying to configure the WAP54G to use DHCP. Trying to access it thru the internet at 192.168.1.245 does not work.
View 1 Replies View RelatedLinksys Access Point :: WRT54G - Unable To Find Access Point In Home Network
Aug 29, 2009I just bought an LG Bluray DVD player (BD390) which is unable to find the access point in my home network.My router is a WRT54G, ver. 2.2, running firmware: Ver.4.21.1. My home network uses high speed cable with two computers on the wireless network, all working with no problems.The router is on the second floor but the two computers and the new BD390 are on the first floor - about 35 feet away. I have the wirelss security set to none and use only the specific computer MAC addresses to allow connection to this network.
I found directions in the forum for a setup using the LG BD390 but with a different Linksys router. I changed the security to WPA (AES); the Beacon interval from 100 to 75; the Fragmentation Threshold from 2346 to 2304; and the RTS Threshold from 2347 to 2307. The DVD wireless connection still failed to find my network. There is a "Push button" connection feature on the BD390 setup which I tried, but the only "button" on the router I could find was in the basic wireless setting, a green icon for the wireless SSID setup. No connection was made there either.
The recommendation connection from the LG manual is for a network cable, but that would be over 50 feet and a real pain to connect, so I would prefer WiFi.
Cisco Wireless :: Upgrading 1042 Access Point To Lightweight Access Point
Apr 20, 2012I had a new AIR-AP1042N-N-K9 access point and I tried to convert it into lightweight mode with the image c1140-rcvk9w8-tar.124-21a.JA2.tar . I used all the methods but the AP is getting hanged at one position after decompressing the new IOS. The capture of the process is below: [code] After this I am getting the junk characters and everytime AP hangs at this position.
View 4 Replies View RelatedLinksys Access Point :: WAP54G Access Point Setup After A Reset?
Jul 9, 2006I had to reset my access point but the login screen fails to appear to lock the router. I don't have the setup wizard disk.
View 9 Replies View RelatedLinksys Access Point :: WAP54G Possible To Downgrade Firmware From Access Point
Jan 17, 2013I have a WAP54g hardware version 1.0.I install de last firmware on this access-point but, this access-point reset automatic after a random time..It’s it possible to downgrade de firmware from this access-point?
View 1 Replies View RelatedLinksys Access Point :: WRT320N Access Point Vs Range Extender
Dec 14, 2011Have a WRT320N router at one end of the house in the basement. Would like to boost signal to other end of the house. Which product should i use, an access point or a range extender? My house is also wired with Ethernet cable and I could plug the access point into an Ethernet port at the end of the house where the signal is weak.
View 1 Replies View RelatedLinksys Access Point :: WAP4410n MIBs Or OIDs For Access Point
Jul 3, 2012I have AP WAP 4410 N, and I want conected AP to cacti. Where is I faoun MIBs or OIDs for my Access Point?
View 1 Replies View RelatedLinksys Access Point :: WAP54G Access Point Unable To Connect To More Than One PC?
Apr 25, 2011I've got a AP WAP54G. I've managed to get into the configuration page and rename my router and set a WPA2-Personl password.
The issue I'm facing is that when me and my roomate try to connect to the router at the same time, it shows the laptop that connects second as one that has 'limited connectivity' and hence cannot use the internet. The 1st laptop however works fine!
The settings for the router have all been left to default.
I'm not sure, but does this problem have anything to do with the fact that the router in configured with a static IP. If so, then there is another issure which is that whenever I try to change it from static to automatic/dynamic IP, the page fails and the router doesn't even get connected to the configuraion page(192.168.1.245) after that. The only way to get that page again is the reset the router.
Also I'm not able to directly get into the config page when I connect my router to my laptop via lan. I need to change the LAN IP to 192.168.1.x where x is >1.
Cisco Routers :: RVS4000 / How To Make External IP Point To Internal Address
Nov 29, 2011Basically I have a group of static public IPs and I need one of them to point to an internal server IP address. This is for the RVS4000 router.
View 3 Replies View RelatedAccess Wifi Internet In Redhat Linux?
Jan 3, 2013How to access wifi internet in Redhat Linux
View 1 Replies View RelatedDisable Network Access Until Reboot Under Linux?
Mar 4, 2012Is it possible to disable network access until a reboot under Linux? I am interested in creating a Freedom equivalent for Linux (currently only available on Windows/Mac)
View 1 Replies View RelatedAccess Files Shared On Windows PC From Linux Computer?
Mar 14, 2012How to access files shared on a windows pc from a linux xubuntu pc? i tried to use the "Gigolo" app but it didn't do anything pyneighborhood saw the computers on the network but didn't able to go into the shared folders...
View 4 Replies View RelatedLinksys Access Point :: Repeat WAP54G Access Point?
Aug 25, 2011What I want to do is the opposite of most configurations. I live on a small island with only one DSL connection. The modem is wired connected to a WAP54G Access point. To extend this access point want to use a WRT54G.
View 4 Replies View RelatedLinksys Access Point :: WRT120N - Cannot Connect To An Access Point
May 10, 2013I'm using a WRT120N and have had no problems connecting most wireless devices, but a Nintendo DS and DSi owned by my family are unable to connect to the access point. My wireless security mode is disabled, network mode is set to mixed, SSID is the same as on the DS/DSi, Channel width is 20Mhz only, Standard channel is set to 6, but I tried using channel 1 and 11 without success, SSID broadcast is enabled.
I've tried every work-about I could find and always get the 51300 error code, and am at a loss as to what else I can try to get the devices to connect to the access point.
Linksys Access Point :: Configure WRT120n As An Access Point?
May 1, 2012Is it possible to configure WRT120n as an access point?
View 1 Replies View RelatedLinksys Access Point :: E3000 Configuration As Access Point?
Apr 6, 2011I have 3 E3000 Routers and would quality input regarding using 1 of the E3000 Routers connected to my Broadband Modem (Roadrunner) and would like to know how to configure the remaining 2 E3000 Routers to be hardwired to my main Router as Access Points located approximate segmented 1/3rd areas throughout my house which really is only 1800 Sq.Ft. in area. How to be configure these routers as access points as well as configuring the main router that will be connected to my broadband router. This is my first network to utilize streaming video, Internet Television Programs, Internet Radio, Accessing the Internet in all rooms of my house and outside the immediate adjacent patio area.
View 1 Replies View Related