Cisco WAN :: C6500 / Linux Machine Setup When Capturing Traffic?

Dec 30, 2011

I am monitoring 2 or more source interfaces which are running 1G traffic on each interface. Destination is 10G interface.There are 2 kinds of traffic running through the source interfaces: icmp and regular IP traffic. I am only interested in capturing icmp traffic. How can I achieve my goal?I don’t have any vlan traffic at all. Router is c6500.
  
         source (1G)                    destination (10G)
------------------------- Router --------------------------------------Linux
                                    |                                  
                                    |   source (1G)                        
                                    |                                  
                                    |    

View 1 Replies


ADVERTISEMENT

Cisco Routers :: Setup VPN Tunnel Between Linux Machine And RVS4000 At A Remote Site?

Jul 21, 2011

I'm trying to set up a VPN tunnel between a Linux machine and a RVS4000 at a remote site (served via satellite connection). After many efforts, I finally succeeded (based on Openswan). However, while PINGing is OK, big packets (from the RVS4000 LAN to the Linux box) arrive corrupted.
 
I lowered the WAN MTU, with no success. What finally did the trick is to lower the MTU at the RVS4000 LAN interface. Since this is not possible via the Web I/F, I did it via telnet ("ifconfig eth0 mtu 1400"). However, this change is lost after router reboot. How can I make the LAN MTU setting permanent?

View 1 Replies View Related

Cisco LAN :: 2811 / Traffic-export Capturing Only Inbound Traffic?

Mar 19, 2013

We have a Cisco 2811 running ITP IOS.  On that router we run the SMPP service.  A client on the network connects to this service, and we need to capture the traffic for debug.
 
I've tried traffic-export, but I cannot see any outbound traffic.I'm guessing that this is due to the fact that the outbound SMPP traffic is not transit traffic as it is generated by the router itself.
 
Is there any way to capture the outbound traffic?

View 4 Replies View Related

Can't See Linux Machine Through Windows XP?

Feb 28, 2013

I have two Win XP machines and a Linux Mint. I can access the shared folders of my Win machines from Linux but Win machines, in the Workgroup, shows the Linux connection as "MyMint server (Samba, Linux Mint)(MyMint)" but I can't access files on that machine. "MyMint" is the computer name.

View 3 Replies View Related

Get Mac Address Of Linux Machine Using Vb6 Programming?

Jul 5, 2011

how to get mac address of linux machine using vb6 programming

View 1 Replies View Related

Make Linux Machine As Access Point?

Jul 9, 2011

How to make linux machine as access point

View 1 Replies View Related

Cisco Firewall :: Pix515E 6.3.5 Capturing VPN Traffic On Inside INT

Nov 28, 2011

Quick question. I have a site - site tunnel that is up and running between a Pix 515E and a 3050 appliance.Tunnel is up and running but on the pix side I dont see traffic from a couple of subnets behind the inside interface.On the vpnallow access list there are no hits So I setup a capture on the inside interface to see if the packets is making it to the inside interface and nothing. There is some traffic making it thru the tunnel that would have to hit the inside int first and even that doesnt showup in the capture.

View 1 Replies View Related

Cisco WAN :: SPAN Session On 2960 Switch Capturing Only Control Traffic

Nov 21, 2011

I have configured SPAN session on 2960 switch, source port being a VLAN and destination being one of the fastethernet ports. All I see in the capture is control traffic (HSRP, RIP, Syslog, DNS..etc). However I dont see any real data traffic being captured. Below is how I have SPAN configured..
 
monitor session 1 source vlan <vlan_id> both
monitor session 1 destination interface fa0/42

View 1 Replies View Related

Cisco Switching/Routing :: Not Capturing Span Traffic On WS-4510 / SupervisorV / 12.2(54)SG1

Mar 22, 2012

I have configured Span port on our 4510. We have an application 5view server to monitor trafic connected to G9/17 Since we have changed the network connection from physical Giga port and add a Port-channel instead, we don't see any more trafic from the new Port-channel to G9/17
 
We have the configuration below on our 4510 :
 
monitor session 1 source interface Gi4/6
monitor session 1 source interface Po20
monitor session 1 filter vlan 311 - 312 , 375
monitor session 1 destination interface Gi9/17
  
From the commands show, we don't see the trafic duplication from the source to the destination port :
 
Port Source
 
4510-5567#sh int po20
Port-channel20 is up, line protocol is up (connected)
Hardware is EtherChannel, address is 0016.9de2.a818 (bia 0016.9de2.a818)

[Code].....

View 2 Replies View Related

Cisco Switching/Routing :: 4900 Capturing VLAN Traffic And Set Destination To GE Ports

Jan 24, 2012

At present we are having a 4900 series switch where we are running one monitor session.Additionaly we are in need of capturing VLAN traffic and set the destination to 2 * GE ports , both are in the same switch.Due to the limitation of two monitor sessions per switch , we thought of putting the destination ports as port channel but it looks like it is not supported.

View 1 Replies View Related

Cisco Switching/Routing :: Capturing Traffic Flows From 3750 To 6509 Then To Netflow

Aug 6, 2012

I am aware that the 3750 switches are not able to support Netflows, so I have created a SPAN port and spanning traffic from a specific port. I would like to create a seperate VLAN and trunk the traffic from the SPAN port down to the 6509 switch and then capture all the traffic for that VLAN on the 6509.

View 4 Replies View Related

Cisco WAN :: Linux Not Passing Traffic Through 1721 / 1841?

Jan 6, 2011

I run a network that uses MPLS circuits to connect all of the companies different stores.  Internet access is through a Cisco ASA5500 here at the corp headquarters.
 
To make all of this work, we use a little 1721 gateway router to move traffic as needed.   All the clients in our corporate office use 10.10.99.1 (Cisco 1721) as a gateway.  The 1721 routes the traffic either to the internet (10.10.99.106 Cisco ASA5500) or the MPLS router (159.61.54.30).
 
For some reason, anything that runs on Linux (Ubuntu server, ReadyNAS boxes, Thecus NAS) will not pass traffic beyond the 1721 gateway router.
 
I've poured over the config for that router, and I can't find anything that could be causing this not to work.  Thinking that the 1721 was bad, I put an 1841 online in it's place, and it did the same thing.   I'm a noob when it comes to Cisco configs, but am learning as I go along.
 
Ive attached a txt file of the 1721 config.

View 31 Replies View Related

Can't Setup NAT For Linux Device?

May 14, 2012

I am having a problem configuring NAT for a Linux device on our network. I am far from a Cisco expert but I have configured this many times in the past for Windows machines quite easily. I do this using the Cisco ASDM 5.2 for PIC GUI. All I needed to do for the Windows machines was:-setup the static NAT rule(inside ip translated to outside ip)-create a security policy(outside, incoming rule) to allow traffic to the outside ipand hey presto it works, ie: i can ping the outside ip and access the device remotely if I have allowed correct ports.I am not sure if this is the correct method but it was how i was shown and has worked many times in the past.But with this Linux device its no dice. The Linux device isnt a desktop but a mediator for industrial air conditioning controls. It runs a web server which we can view temperatures etc... through a browser. This works inside our network by browsing to the inside ip but I am trying to set it up to work outside of our network.

View 1 Replies View Related

Cisco Switching/Routing :: 877 - Directing Static Ip Traffic To Certain Machine

Dec 18, 2011

We have one machine running an application accessible remotely. We have cisco877 router, and static ip to access the application remotely. We recently done an update of out application software which has changed the access port/link to application.
 
since we update the software We can access the application internally through local ip but is not accessible through WAN with static ip, as the port no has changed.
 
I not having much knowledge of networking don't know what changes should be made in router so it direct the traffic of static ip to the machine running the web application, as before.
 
I tried looking for clue in router through its SDM Express interface, but no joy.

View 1 Replies View Related

Cisco Routers :: RV220W Machine Can't Send Or Receive Any Traffic To WAN Side

Aug 22, 2011

I have a RV220W (running fw version 1.0.2.4) that i am trying to configure for a client.  They are set up on Comcast with 13 available IP's.  I should note that this netowrk is now currently running without issue using a Cisco Pix 506e.  Unfortunately, the Pix is almost impossible to configure using the GUI now as I have to load a 4-year old version of Java now just to get the PDM to load. But I digress.I've set up the RV using the identical settings as the Pix on bth the LAN and WAN side.  When I do, computers on the LAN side can all reach the Internet ok.  However, once I enable one-to-one NAT for an internal server, that machine can't send or receive ANY traffic to the WAN side.  I've even tried setting access rules enabling ANY traffic in both directions, and that has no effect.  Either I'm missing something, or this is just one more bug in this product.
 
Even though it was a bit of a step down going from the Pix to the RV220W, it was done for the ease of setting up VPN's as I was ready to purchase a second one for a new satellite office opening in a few weeks.  It looks like we will be switching vendors on the router side as my faith in Cisco is waning at this point.

View 1 Replies View Related

Cisco VPN :: How To Configure Router To Forward Traffic Coming In TCP Port 8100 To Machine

Aug 20, 2012

I have the following setup: Private network <-> SW <-> CISCO VPN <-> ISP MODEM
 
I have configured VPN part and is working correctly. I have a computer in the private network at static address 192.168.1.100  and an application is running on it on 8100 tcp port for clients.
 
Now I need to connect from the Internet to the application on 192.168.1.100 on port 8100.
 
How to configure CISCO router to forward traffic coming in tcp port 8100 to machine 192.168.1.100?? ISP Modem is going to handover all the traffic to CISCO device.

View 8 Replies View Related

TP-Link Dual-Band Wireless :: WDR-4900 When There Is Large Traffic Rate Whole Machine Is Very Unstable

Feb 16, 2013

Region : Hongkong
Model : TL-WDR4900
Hardware Version : V1
Firmware Version : 3.14.0 Build 130206 Rel.34701n
ISP : PCCW Netvigator

I have bought tp-link wdr-4900 for several days and encounter the following problems

1) nfs is not work, whenever I set up the nfs server (using hanewin nfs server), the media player fails to read the media file. (Problem does not appear for the previous ASUS n56u)

2) When there is large traffic rate (e.g. BitTorrent), the whole machine is very unstable, LAN and Wireless dies (SSID disappears, and LAN appears "ERR Connection" and "DNS not respond"), give me a feeling that the router cannot handle high traffic rate and the whole machine slows down and fails.

View 14 Replies View Related

Severe % Dropped Packets On XP Machine When Windows 7 Machine On Network Not Switch

Aug 2, 2011

I have a strange error on my home network that I cannot find a solution to.I have an Huawei SmartAX MT882 from TalkTalk acting as a modem connected to a D-Link DSL-G624T acting as a router/switch. Connected to the D-Link I have a Windows 7 Pro machine (64-bit, SP1) and an XP (home i think) machine (sp 2 i think).The SmartAX modem is set up to perform DHCP and DNS relaying and the D-Link has DHCP turned off and DNS relay turned off.The Win7 machine can access the network, get an IP address and access the internet without problems, regardless as to the status of the XP machine.The XP machine can access the network, get an IP address and access the internet with no problems ONLY of the win7 is powered up. When the win7 machine is off, the XP machine seems to drop about 25% of the ping packets between it and the D-Link router and has no internet access (because of this i assume). [code]

View 8 Replies View Related

Installed Network Printer On Windows 7 Machine / Now XP Machine Won't Print To It

Jul 20, 2011

New Win-7 machine set up. I used the printer set-up wizard to install a networked printer in the new machine with absolutely no problem. Proved it would print from that machine.Now, I get a call informing me that her old XP machine, which had been printing to the network printer with no problems, will no longer print.Documents go into the print queue, but they don't get printed.No error messages show up.I did some messing around via remote access, and finally removed the printer with the intention of reinstalling it.Scanning for network printers turned up several redundant instances of the same printer with different names. Some are identified as "invalid" some a "access denied". Bottom line. I can't get any of the selections to install.On the Win-7 machine I did find a window that indicated that the printer is designated as being shared, but I didn't explicitly set it for sharing when I installed it. Also, I somehow got to a window that told me that for printers that were to be shared with other versions of windows I could optionally install drivers to support such machines. Didn't have the driver disk handy and took the window down. Now I can't even find it again.I need sorting this all out.Part of the problem is that out there in "network land" there are redundant remnants of previous installations that are being remembered inappropriately.

View 11 Replies View Related

Cisco :: Span Capturing Dot1q Headers?

Dec 30, 2012

Im trying to span a trunk port and capture the dot1q headers on the destination. I'm positive I have it configured right (encap replicate) but wireshark just isn't seeing them. Im trying to capture them on a seperate NIC on my Windows 7 64bit pro box. The NIC is a realtek RTL8169 and it just won't capture the headers. I've also tried the built-in motherboard NIC (which is also a realtek) with the same results.

View 19 Replies View Related

Slow Capturing Packets For Specific SSID

Apr 3, 2012

i've just installed a new software called commview for wifi, it has a problem in slow capturing packets for a specific SSID & it stops at a certain amount of packets (10,000). I contacted their support & tried some solutins, at last they asked me to run it in debug mode & send them the log file, i'm not sure how to do it but i googled, when i try any command from the cmd it gives me that it isn't recongnized as an internal or external command, operable program or patch file.

View 1 Replies View Related

Windows 7 Machine Does Not Detect Win Xp Machine

Apr 29, 2012

I have a network problem. My windows 7 machine is not detecting win xp machine whereas win xp machine is detecting win 7 machine. They are in the same workgroup named Home. And the networking system is set to work. I have left the homegroup I was previously in. I enabled file sharing for devices that use 40 bit and 50 bit encryption. On XP I have enabled NetBios over TCP/IP. File sharing is enabled on both computers. I think it's something obvious as both instalations on different computers are really fresh and both windows haven't been tampered with.

View 12 Replies View Related

Cisco WAN :: C6500 Routing One IP Away From Connected Sub-net

Jan 24, 2013

I have lets say a /24 directly connected via a vlan on a C6500 in the network.I'm trying to migrate some servers/devices away from it , however I need to move parts of it away bit by bit ( For example a /32 or a /30  that make up the /24 )Ive tried a direct ip route x.x.x.x 255.255.255.255 y.y.y.y     and even a ip route x.x.x.x 255.255.255.255 y.y.y.y 1
 
Yet it still prefers the directly connected range ( as I pretty much expected. )
 
Is there any way I get it to prefer a static route over a directly connected?

View 13 Replies View Related

Realtek PCIe Family Controller - Wireshark Capturing Packets

Dec 18, 2011

Ive just downloaded wireshark just to mess around and ive noticed that even when ive got nothing open its still capturing packets. It gives me a choice of interfaces i want to choose to monitor and i would of thought it be "Realtek PCIe Family Controller" as this is normally the default one (im using wireless) but its saying no packets are being captured from this interface its the "Microsoft" Interface thats capturing the packets. Ive attached a screenshot, i know this isnt nothing bad but was just wondering 1) why isnt my Realtek PCIe interface capturing anything (even when i have youtube open it doesnt capture anything) and 2) why is Microsoft capturing packets? what is this microsoft interface and why is it capturing packets when nothing is open.

View 2 Replies View Related

Capturing High-quality Audio And Send It Over Wifi To A Receiver?

Feb 16, 2011

capturing high-quality audio (44.1 kHz, 12+ bits) and send it over WiFi to a receiver.

Microphone->[Audio module+Transmitter] -> Wireless Link -> Receiver

View 2 Replies View Related

Cisco Switching/Routing :: 3750 / 2950 - RSPAN Not Capturing Required Data?

May 5, 2013

I have a RSPAN session configured between a Cisco 3750 and Cisco 2950 switches and I dont see the traffic I am expecting to see on the destination port. I only see broadcast traffic .. HRSP hellos etc. Below is what I have configured on both switches.
 
3750 (gi1/0/33)----TRUNK------(fa0/47)2950(fa0/4)-----windows server
 3750
--------- 
monitor session 1 source interface gi1/0/18
monitor session 1 destination remote vlan 901

[code].....

View 3 Replies View Related

Cisco :: Using Local User Database As Login To C6500 IOS 12.2

Sep 11, 2012

We are wanting to use local database users to authenticate our SSH connections to our 6500 cores.
 
We have added the usernames and password into the 6500 using
 
username anameduser password astrongpassword or username anameduser secret astrongpassword
 
We where expecting the commands to be the same as other iOS devices example C3750 we would add.
 
Line vty 0 4  login local
 
And this would allow us to use the local user database to authenticate our ssh sessions.
 
The login local commands are not availbe on the 6500s and we have not found any documentation on how to impliment a local database for this purpose except in a CatOS 6500.

View 1 Replies View Related

Cisco VPN :: C6500 Need A Specific Line Card For Tasks

Feb 20, 2012

Im wondering if the Adaptive Security Services Module has some of the same function as a ASA 5500.Can we configure a IPSec VPN tunnel, SSL VPN tunnel or IPS on a C6500 with ASA-SM or do we need a specific line card for those tasks?

View 1 Replies View Related

Cisco Application :: C6500 CSM Real Server Cannot Ping Its VIP

Oct 25, 2011

I've been running into an issue with Cisco CSM for a number of years, but always found a way around it.  Im attempting to get to the bottom of this to find out once and for all, if this is infact a limitation of the device, or a config issue/work around is possible.
 
Here is my situation.  My CSM's are configured in bridging mode.  Traffic works great, traffic bridges across vlans correctly.  Everything works and have many instances of smilar configurations running in production.  Every once and a while, a client requests that a "real" server (ie LWCMW-021)
cannot ping its VIP address (10.95.88.68).  I am assuming this is related to the NAT Server, but not 100% sure.  Clients have requested this functionality for some type of application based purpose, but Im unaware if CSM in bridging mode can provide this or not. 
 
real LWCMW-021
address 10.95.88.59
inservice
!
real LWCMW-022
[Code]....

View 5 Replies View Related

Cisco Application :: ACE10-6500-K9 Supporting C6500 IOS

Dec 7, 2011

It seem that ACE10 not support 12.2(33)SXJ1 IOS running on C6500. The box cannot detect the ACE module when power up. Currently the ACE10 running on system A2(30).
 
My challenge i have the ASA SM that compulsary to run on 12.2 (33) SXJ1 version. How to let these 2 module can running on the same C6500 box?

View 1 Replies View Related

Wireless :: BD C6500 Samsung Gateway Ping Comes

Jan 29, 2011

I have a wireless system and I am setting up the player but cannot connect because of the gateway ping problem.I called my server and was told that my average ping rate is 1292 and have no hope of getting connected.

View 7 Replies View Related

Cisco Switching/Routing :: C6500 / MPLS Campus LAN Virtualization And VSS?

Apr 21, 2010

I'm going to start the evaluation of implementing the virtualization of our campus LAN using MPLS.We'll get many inter-VLAN routing domains per VRF on the same LAN infrastructure.The LAN infrastructure is based on C6500 implementing VSS.Do you have experience with this kind of setup?Any known/faced issue that might prevent the setup of MPLS on VSS enabled C6500?

View 4 Replies View Related

Cisco Switching/Routing :: C6500 - Heat Dissipation With Or Without Transceivers?

Apr 13, 2013

how is calculated heat dissipation of ethernet modules for c6500? For example, heat dissipation of WS-X6908-10G-2T - 2083.32 BTU/hour.. This heat dissipation of the empty module, without transceivers? Or including all installed transceivers?

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved