I recently acquired a 2509 router that I plan to use as a serial device router. My question is, how do you create the virtual com ports on Windows and Linux machines to point to the TCP address:ports in the 2509 router? Is there software or drivers that do this? Or something third-party?
View 12 RepliesI have a single physical machine A (Windows XP). On A, I have 3 virtual machines (A1,A2,A3) If a want to communicate with port 4444 on virtual machine A1, can communicate to the same port 4444 on machine A2, All the VMs below exist on the same physical machine.
View 3 Replies View RelatedI have installed 4 virtual machines using virtualbox on a windows 7 host and i'm searching how i could connect them so as they can communicate each other.
View 2 Replies View RelatedImplement the procedures required so that machine 1 and machine 2 can communicate statically with one another. Outline the TCP/IP settings to be used on each of the machines and set this machine up accordingly.
I followed this guide [TUT] Setting a static internal IP (Windows and Linux)but what has happened is that now the two machines can't connect to the internet.
Implement the procedures required so that machine 1 and machine 2 can communicate statically with one another. Outline the TCP/IP settings to be used on each of the machines and set this machine up accordingly.
View 4 Replies View RelatedI need a virtual switch in my Linux OS instead of a real switch for doing some research purpose. Means it works same as a real hardware switch work. Suggest me any virtual switch for linux. For example there are 3com, cisco switches.. I need a virtual switch which work same as real switch.
View 1 Replies View RelatedWe are experimenting with virtual machines running on some laptops here as part of a future deployment.Equipment in use:
-5508 WLC
-1262 LWAP
The actual operating system has no issues connecting to the wireless. When you start the virtual machine on any client machine (OSX, Win 7, Win XP, anything) it is unable to get an IP through an external DHCP server when the VM is set up to use a bridged connection.This works fine with Autonomous access points and over cable all mapped to the same VLAN. Helper addresses are configured on the VLAN.Is this a limitation of the WLC where it cannot provide more than one IP address per MAC? Is it a limitation of CAPWAP? Or is there an option to turn of DHCP snooping (which I suspect to be the cause of the issue)?
I need to create a network bubble..means..Let say I have 4 machines having IP address 10.1.1.1,10.1.1.2, 10.1.1.3 and 10.1.1.4 (these are not actual IP's, using them just for explaining). These machines are connected to public network. At a given point in time, I need to isolate these machines from the public network in a way where - All these 4 machines can talk to each other using the assigned IP's. - These 4 machines cannot talk to any other nodes in the public network. no other machines outside these 4, will be able to ping these machines.
View 4 Replies View RelatedAccording to the Installation notes for ACS 5.3 we need 500GB of storage for a working installation - if not it defaults to taking 60 GB of disk space for an eval version.
View 1 Replies View RelatedI am taking a college course using Microsoft Windows Server 2008 Administrator Lab Manual. The labs assume that you are in a MS lab with the ability to connect to thier domain and servers. I want to create my own virtual lab to simulate MS environment so I can follow the assignments. I have VirtualBox installed. I am a completely new to servers and networking
View 2 Replies View RelatedI've been reading for the past hour about opening ports on Ubuntu 12.04 and I can't seem to get anything to work. I'm running a program with an RPC server accepting local connections on localhost (127.0.0.1) which has allowed ip range 192.168.*.*
I've tried to edit the iptables to allow incoming connections, but curl still can't connect to the RPC server no matter what I do.
$ sudo iptables -A INPUT -i eth0 -p tcp --dport 18332 -j ACCEPT
$ nmap -v -sT localhost
Starting Nmap 5.21 ( http://nmap.org ) at 2013-07-13 05:54 UTC
Initiating Ping Scan at 05:54
[Code].....
can we create VRF on Cisco 3550 EMI switch so that we can create mutiple virtual switch on physical switch.
View 4 Replies View RelatedI cannot integrate Virtual MSE 7.3.101 with my Prime Infrastructure 1.2 After I setup MSE via its wizard, I make a change on WCS username and password. When I try to integrate MSE with Prime Infrastructure, Prime notify me about the mismatch username/password.
Both systems are fresh install on my UCS C220 M3.
I have an issue with virtual box as it is blocking all my ports when the adapter is set as bridged. My OS is Windows 7 and the OS I am trying to connect to is Win 2k3 Server.
I made it bridged to be on the same LAN. how I can open ports and can be able to telnet for example port 80?
I had the 2 circuits go down at the same time from our ISP and I had to power cycle the router and when it came back up I went from VA # 2 to now VA 3#....I know what is what but it is confusing for my counterpart and I can not remove the old entry for VA#1 and VA#2. [code]
View 3 Replies View RelatedRegion : Hongkong
Model : TL-WDR3600
Hardware Version : V1
Firmware Version :
ISP :
When using the USB printer port share function, I found that some PCs, which had never physically connect to a USB printer before, will not have the virtual USB printer port in the port selection. In this way, TP-Link's USB printer controller will not be able to setup the connection. The PC will not be able to use the shared printer from my WDR3600.how can I create a virtual USB printer port in the remote PCs (without need to physically connect a printer to them) or other method to use the shared printer?
i have configured some machines into a workgroup. all machines are opening except two machines having windows 7 . they are showing a window for username and password as appears in a domain. how to correct it
View 3 Replies View RelatedHow can I set up a functional VPN between two windows 7 machines?
[code]....
I have 3 machines running windows XP, they all belong to my company's domain. These machines have to leave our office but still have to be able to connect to each other and share a few folders on each. I used to do this all the time. I would make sure to turn on the "Server" service, set the windows firewall to allow File and Printer sharing, set the File and Printer sharing setting in the Local Area Connection properties, and set the proper sharing/security of the specific folder. Then as long as each machine used a specific local logon name that was the same on each machine, they would all connect to the shares and work perfectly.However now, I seem to not be able to get any of this to work on machines that have service pack 3. Is there something in sp3 that breaks this?Isn't there a way to still share files on these sp3 machines even though I'm not on the domain? (without changing the domain membership)
View 9 Replies View RelatedI am on my home network and I do have a Windows 2008 Server and hopefully I will have another one soon. I also have 2 windows xp machines and 2 windows 7 machines and a non-operating server.
View 6 Replies View RelatedI'm having problems in a mixed XP Pro (SP3)/Win 7 Pro (64 bit) network getting the XP machines to access data on the Win7 box. The XP machines are connected wirelessly to a D-Link DSL-2640R router modem and the Win7 machine is connected via an Ethernet cable.
Internet access from all machines works perfectly.The two XP machines can see each other either via mapped drives or My Network Places and can access files.The Win7 PC can access data on both the 2 XP machines.All machines are part of the same Workgroup and the network is set up as 'Office' on the Win7 machine.The XP machines can see the Workgroup, including the Win7 machine after I changed the network type from Home to Office, but can not access the data on it.I assume this is a permissions problem on the Win7 machine. I've made the root directory of the HD in the Win7 machine shareable as \Hppro3125hd via Advanced Sharing/Properties and in the Advanced Sharing tab I have set the permissions for Everyone to Full Control.
There is only one user (Garry) explicitly set up on the Win7 machine. I've tried connecting to the Win7HD via a mapped drive on each of the XP machines by logging on as a different user i.e. matching the user name from the Win7 machine but still no joy.Is there an easy to follow step-by-step guide to lead me through the necessary steps to allow the XP machines to access data on the Win7 box?
I am trying to connect 2 windows 7 machines wirelessly but without much luck.Both machines are connected to the wireless router and have internet connection. I have created a workgroup and put files into the the public folder, but still cannot get to the files even though the computers can see one another.
View 1 Replies View RelatedI have a Windows 7 machine sending shares across the network. Other Windows 7 machines have no problems connecting, but XP machines cannot connect. (Win7 can connect to XP shares).
I have adjust every setting that I have seen to no avail. This includes turning off HomeGroups, turning off password. Removing my password from my user account. Adding "Everyone" to each of the shares. I have even messed with the Local Group Policy Editor to send unencrypted passwords to third party SMB's.
We have a Windows 7 machine and two Windows XP machines. We use windows sharing of resources over a cisco wireless network. Sharing works fine on all computers for files and printers, however the DVD/CD Rom drives are not accessible.Sharing is enabled on all of these devices.When we try to access these DVD/CD Rom drives we get the following error message:Windows cannot access //computer name/resource name.You do not have permission to access //computer name/resource name. Contact your network administrator to request access.
View 1 Replies View RelatedI recently added two Win7 computers to my ethernet network (one replaced an older computer, the other has brought the total to 4 machines). The original 2 workstations (XPpro) are fine, but the 2 new Win7 computers intermittently lose internet connection. They remain on the network, just lose internet. The 2 that are having the problem are wired directly to the first router, Linksys WRT160N. The 2 XP computers, that work perfectly, are wired 150 feet away, attached to a Linksys WRT54G used as an access point.The problem is much more severe on one of the new machines, with Win7 Home Deluxe - it stays offline about half of the time. The other, Win7 Pro, is occasionally waxed for 5 or ten minutes. Both use the Win7 default firewall & settings, I've added Avast free anti-virus but no additional firewall software. I have not noted any error messages other than the red X on the networking diagram, and the browser can't find page
View 2 Replies View RelatedI have two Win XP machines and a Linux Mint. I can access the shared folders of my Win machines from Linux but Win machines, in the Workgroup, shows the Linux connection as "MyMint server (Samba, Linux Mint)(MyMint)" but I can't access files on that machine. "MyMint" is the computer name.
View 3 Replies View RelatedWhy is loop-back only working on ports forwarded in the Virtual Server section and not Port Forwarding or even DMZ? I have seen a post about loop-back on the DIR-655 from a while ago that had said to disable SPI and change NAT Endpoint to independent, I have done this and loop-back still doesn't work.
View 1 Replies View RelatedRegion : Mexico
Model : TD-W8968
Hardware Version : V1
Firmware Version : the last version of this web page, i forgot number
ISP : TELMEX (infinitum)
i have some problems to configure the port forwarding in my router, don't it work ! but the port number 80 it works with my sub-domain in the internet. after i change this port to 8080 still dont work the port forwarding. the FTP server its ok.
[code]......
I've created a workgroup on windows 7 Laptop to connect with 2 other system, one is PC with win7 and another is laptop with win vista, I've a wirless wi-fi switch. Problem to share file with Windows Vista only, PC with Windows 7 is working well, But Windows vista laptop can't connect with any of two systems...
View 1 Replies View RelatedI need to know in what operating systems Windows or Linux I can install the WCS WCS-PLUS-UPG-100. [code]
View 8 Replies View RelatedHoy-hoyIs there exist any tool like iwconfig (linux tool, I think), but working in windows XP?civ-civ
View 3 Replies View RelatedI have a Canon LBP2900 printer. I have connected the printer with my desktop PC running windows xp and shared it. I have Ubuntu in my laptop and connected to the local network. Is there any easy way to print from ubuntu?
View 2 Replies View RelatedUsing CCP I am trying to create a NAT entry for a range of ports. CCP window for a new NAT has only one entry for the port #. Is it possible to set uf port ranges in 877 router?
View 2 Replies View Related