Windows 7 Machines And Non-Operating Server
Sep 18, 2011
I am on my home network and I do have a Windows 2008 Server and hopefully I will have another one soon. I also have 2 windows xp machines and 2 windows 7 machines and a non-operating server.
View 6 Replies
ADVERTISEMENT
Sep 2, 2011
How to share files btween XP & Win98 operating systems , 2 towers
View 1 Replies
View Related
Feb 2, 2013
I need to order LMS for one of our customer with 500 devices and reporting capabilities ..... So i chose base license "R-PI-1.1-K9" and 500 device license "R-PI-1.1-500-K9" and Compliance Management - 500 Device License "L-PI-1.1-CM-500"? i tried to search server capability for my requirements & Operating system and couldn't find it .....
1) What is the server requirements ?
2) What is operating system (windows 2008 or VMWare VMware ESX/ESXi Version 4.1 or 5.0)
3) Is their any dedicated appliance from Cisco ?
View 2 Replies
View Related
Jul 1, 2012
I need to know in what operating systems Windows or Linux I can install the WCS WCS-PLUS-UPG-100. [code]
View 8 Replies
View Related
Feb 14, 2011
One of our servers has lost the ability to access WAN side computers. For example, it can't ping google.com. It can, however, interact with LAN computers. One thing of note -- it is set up with a static IP and one-to-one NAT on the firewall (sonicwall)When we disable the one-to-one nat on the firewall the server is able to ping out. We do need to keep the one-to-one nat up though -- as it provides access to the site the server hosts
View 4 Replies
View Related
Jul 24, 2011
i have configured some machines into a workgroup. all machines are opening except two machines having windows 7 . they are showing a window for username and password as appears in a domain. how to correct it
View 3 Replies
View Related
Oct 15, 2012
How can I set up a functional VPN between two windows 7 machines?
[code]....
View 3 Replies
View Related
Oct 26, 2011
I have 3 machines running windows XP, they all belong to my company's domain. These machines have to leave our office but still have to be able to connect to each other and share a few folders on each. I used to do this all the time. I would make sure to turn on the "Server" service, set the windows firewall to allow File and Printer sharing, set the File and Printer sharing setting in the Local Area Connection properties, and set the proper sharing/security of the specific folder. Then as long as each machine used a specific local logon name that was the same on each machine, they would all connect to the shares and work perfectly.However now, I seem to not be able to get any of this to work on machines that have service pack 3. Is there something in sp3 that breaks this?Isn't there a way to still share files on these sp3 machines even though I'm not on the domain? (without changing the domain membership)
View 9 Replies
View Related
Jan 18, 2011
I'm having problems in a mixed XP Pro (SP3)/Win 7 Pro (64 bit) network getting the XP machines to access data on the Win7 box. The XP machines are connected wirelessly to a D-Link DSL-2640R router modem and the Win7 machine is connected via an Ethernet cable.
Internet access from all machines works perfectly.The two XP machines can see each other either via mapped drives or My Network Places and can access files.The Win7 PC can access data on both the 2 XP machines.All machines are part of the same Workgroup and the network is set up as 'Office' on the Win7 machine.The XP machines can see the Workgroup, including the Win7 machine after I changed the network type from Home to Office, but can not access the data on it.I assume this is a permissions problem on the Win7 machine. I've made the root directory of the HD in the Win7 machine shareable as \Hppro3125hd via Advanced Sharing/Properties and in the Advanced Sharing tab I have set the permissions for Everyone to Full Control.
There is only one user (Garry) explicitly set up on the Win7 machine. I've tried connecting to the Win7HD via a mapped drive on each of the XP machines by logging on as a different user i.e. matching the user name from the Win7 machine but still no joy.Is there an easy to follow step-by-step guide to lead me through the necessary steps to allow the XP machines to access data on the Win7 box?
View 14 Replies
View Related
Aug 10, 2011
I am trying to connect 2 windows 7 machines wirelessly but without much luck.Both machines are connected to the wireless router and have internet connection. I have created a workgroup and put files into the the public folder, but still cannot get to the files even though the computers can see one another.
View 1 Replies
View Related
Jan 26, 2011
I have a Windows 7 machine sending shares across the network. Other Windows 7 machines have no problems connecting, but XP machines cannot connect. (Win7 can connect to XP shares).
I have adjust every setting that I have seen to no avail. This includes turning off HomeGroups, turning off password. Removing my password from my user account. Adding "Everyone" to each of the shares. I have even messed with the Local Group Policy Editor to send unencrypted passwords to third party SMB's.
View 1 Replies
View Related
Apr 22, 2013
I have installed 4 virtual machines using virtualbox on a windows 7 host and i'm searching how i could connect them so as they can communicate each other.
View 2 Replies
View Related
Jun 20, 2011
We have a Windows 7 machine and two Windows XP machines. We use windows sharing of resources over a cisco wireless network. Sharing works fine on all computers for files and printers, however the DVD/CD Rom drives are not accessible.Sharing is enabled on all of these devices.When we try to access these DVD/CD Rom drives we get the following error message:Windows cannot access //computer name/resource name.You do not have permission to access //computer name/resource name. Contact your network administrator to request access.
View 1 Replies
View Related
Feb 4, 2011
I recently added two Win7 computers to my ethernet network (one replaced an older computer, the other has brought the total to 4 machines). The original 2 workstations (XPpro) are fine, but the 2 new Win7 computers intermittently lose internet connection. They remain on the network, just lose internet. The 2 that are having the problem are wired directly to the first router, Linksys WRT160N. The 2 XP computers, that work perfectly, are wired 150 feet away, attached to a Linksys WRT54G used as an access point.The problem is much more severe on one of the new machines, with Win7 Home Deluxe - it stays offline about half of the time. The other, Win7 Pro, is occasionally waxed for 5 or ten minutes. Both use the Win7 default firewall & settings, I've added Avast free anti-virus but no additional firewall software. I have not noted any error messages other than the red X on the networking diagram, and the browser can't find page
View 2 Replies
View Related
Aug 3, 2012
I've created a workgroup on windows 7 Laptop to connect with 2 other system, one is PC with win7 and another is laptop with win vista, I've a wirless wi-fi switch. Problem to share file with Windows Vista only, PC with Windows 7 is working well, But Windows vista laptop can't connect with any of two systems...
View 1 Replies
View Related
Sep 5, 2011
I recently acquired a 2509 router that I plan to use as a serial device router. My question is, how do you create the virtual com ports on Windows and Linux machines to point to the TCP address:ports in the 2509 router? Is there software or drivers that do this? Or something third-party?
View 12 Replies
View Related
Jul 5, 2012
I planned for my customer to replace his old LMS 4.0.1 server under Windows 2003 by a new server under Windows 2008 R2.Customer wants also to set a new LMS name and IP address for the new server under Windows 2008 R2 and keep both servers on the network.I'm wondering what could be the best procedure to do that migration.Can I used backup / restore procedure in that case ?If yes, what file must I modify to adapt the new LMS configuration to new hostname and IP Address ?
View 2 Replies
View Related
Jan 10, 2013
i've been using a VPN to connect to my home network from elsewhere for a few months. It's set up as follows:
PPTP
Maximum Strength Encryption
EAP-MSCHAP-v2 Authentication
Now I find out that MSCHAPv2 authentication has been broken and is no longer considered secure (even by Microsoft), so I want to change the protocol I'm using to make it secure.
However, I've spent 3 hours now researching this and I cannot for the life of me figure out how to use a better protocol on my Windows Server 2012 home server. I've tried setting up PEAP authentication (still PPTP) a la Microsoft's recommendation document, but it requires a certificate. I've created a self-signed certificate but it seems I can't issue certificates (via this method) without being a member of a domain, so I'm stuck. I can't even get started with L2TP since I can't find the option for it.
My question is this: Is there a way to setup a secure VPN server using Windows Server 2012 without a domain? If so, how do I do this?
View 1 Replies
View Related
Sep 29, 2011
i am facing the same problem now but am using windows 2003 server
View 1 Replies
View Related
Feb 11, 2011
I have install the administration toolpack on Windows 7 and enabled remote connections on my server 2008 box, When i try and connect with my Windows 7 server manager it does not work.I see stuff on google about enabling a trustedhost with winrm but can't find a way to do this.
View 18 Replies
View Related
Mar 10, 2011
Is there an iTunes Server for WHS 2011 available?
View 3 Replies
View Related
Nov 5, 2012
I was wondering if it is possible to install a certain operating system on a network HDD. any possible install a virtual machine or use that as a remote desktop to retrieve on a ipad.
View 1 Replies
View Related
Jan 3, 2012
I'm adding a router to my existing Win XP Home laptop in order to communicate with a new Dell Inspiron Win 7 laptop and want to be able to access the internet from both. My Netgear Router is setup and working and both laptops recognize the net. How do I get the Win 7 unit to access the net and e-mail?
I use Windstream as my ISP but I use AOL for e-mail. Am I trying to do something that cannot be done?
View 1 Replies
View Related
Aug 24, 2011
I am getting following error during installation of LMS 4.0. ( "CWLMS-4.0-100-K9").I have installed SP1 for the Windows 2008 Standard R2, still getting same error. Since Cisco's minimum requirement is Windows 2008 Standard and Enterprise with Service Pack 1 and Service Pack 2 (32 and 64 bit).
View 2 Replies
View Related
Oct 17, 2012
I have a Linksys E4500 as the main router and would like to use the WRVS4400N as a bridge to extend the range of my network and also attach a NAS to it. Is this possible? I've been trying different options but have been unsuccessful.
View 1 Replies
View Related
Aug 28, 2012
After getting New Workstations, I wanted to connect that to the SERVER but Windows 7 could not log into domain of our server with Windows Server 2003. Besides following the proper process/steps. I am able to use the printer and internet shared through SERVER though.
View 2 Replies
View Related
Dec 14, 2010
I've been reading that the Windows Server Backup that is included with Server 08 R2 is pretty good. Is spending $400 on a third party utility worth it?
I'm asking because we're purchasing a new server soon and I want to know if the included backup is going to be good enough. Will be backing up server state as well as data to tape and possibly an off site server (server 2003) if I get my way.
View 19 Replies
View Related
Sep 16, 2012
I am redoing my homes networking and I am looking for a firewall. I heard that you can install clear os on a server and use it as a firewall and a dhcp server. So i was going to install it on a rack in my server cabinet. does the server need to have a wan port and a lan port? Or how does the server get connected? So, so far its the cable modem into the clear os firewall and then into my switch. Is is possible to use the clear os server as the dhcp server for the whole house? From the switch I am going to connect the rest of my servers, and the rest of the house. I was going to connect two wireless routers for my house. Would that work with the clear os server?
View 2 Replies
View Related
Jun 12, 2012
I might have to reboot my operating system, I have a Cisco wireless router, so I have to reset it, and set it up again after i reboot my operating system?
View 8 Replies
View Related
Jan 3, 2013
i am having trouble connecting my belkin router to my linux mint 14 operating system
View 1 Replies
View Related
Feb 16, 2010
I have a Cisco 2106 WLC, and a 1131ag Access Point. The 802.11a/g Radio "Operational Status" = DOWN. All other Radios are UP. I'm wondering if this is normal behavior as no clients are connecting to it over the 802.11a/g Radio.
View 8 Replies
View Related
Jul 18, 2012
I have an AE3000 dual band wireless adapter using the Win 7 Pro OS. At work our routers all use the same SSID, but utilize different channels. In terms of signal strength, the strongest signal is usually, but not always, one of the channels on the 2.4GHZ band (usually 11). However, in terms of speed of connection and lack of overcrowding, the best signal is invariably one the channels on the 5GHZ band (usually 161). My AE3000 will inevitably connect to the strongest signal (channel 11) even though it only slightly stronger than the signal on channel 161 and furnishes a much slower connection than that obtainable on channel 161. Is there any way I can "force" the AE3000 to connect via channel 161 rather than channel 11?
View 6 Replies
View Related
Jun 14, 2012
My computer is a Toshiba Sattelite o/s win 7. My wi fi signal is excellent, yet my signal keeps dropping or saying limited access.I have tried resetting the router and resetting my default windows settings on the computer. All other lap tops and wireless devices in the house do not have an issue.I discovered the other day as long as the laptop ( not the router) is plugged in and not running on batter power that i do not have a problem staying connected.For fun i wondered if it had something to do with the power cord making some kind of connection when plugged into the lap top, (since everything is more compact in them)I tried having the power cord plugged into the lap top but not into a power source but I still lost signal.
View 1 Replies
View Related