Reset Wireless Router After Rebooting Operating System?
Jun 12, 2012I might have to reboot my operating system, I have a Cisco wireless router, so I have to reset it, and set it up again after i reboot my operating system?
View 8 Replies
ADVERTISEMENT
Cisco WAN :: 7600-ES+20G3C Card - Warning / Any System Reset Will Change Operating Mode
Oct 14, 2012I am facing problem with 7600-ES+20G3C card / Any system reset will change the system operating mode
View 2 Replies View RelatedLinksys Wireless Router :: E2500 Install Not Supported On Operating System
Sep 12, 2012Im trying to install the e2500 router on my sisters macbook, but it says it is an "unsupported operating system". She has operating system 10.8.1. Why am i not able to install It?
View 1 Replies View RelatedLinksys Wireless Adapters :: Wpc11ver.3 / Get Driver For Ubuntu Operating System?
Dec 22, 2012wpc11ver.3 / get driver for Ubuntu operating system?
View 2 Replies View RelatedInstall A Form Of Operating System On HDD?
Nov 5, 2012I was wondering if it is possible to install a certain operating system on a network HDD. any possible install a virtual machine or use that as a remote desktop to retrieve on a ipad.
View 1 Replies View RelatedCisco WAN :: 1800 Updating System Image Without Rebooting Router
Feb 26, 2013I recently formatted the flash drive of an 1800 router and replaced it with an updated image. However, the new features within the new image aren't reflected in the router. I believe that this is because a reboot would be required for the updates in the new image to be reflected in the router i.e. the image needs to be added to the system. How to get the image to the system without a reboot and if by doing so I would get all the new features from the image.For example, the show version below shows the old image in the system as [code]
View 2 Replies View RelatedFile Sharing Between XP And Windows 98 Operating System?
Sep 2, 2011How to share files btween XP & Win98 operating systems , 2 towers
View 1 Replies View RelatedCisco :: Operating System Support For CWLMS-4.0-100-K9?
Aug 24, 2011I am getting following error during installation of LMS 4.0. ( "CWLMS-4.0-100-K9").I have installed SP1 for the Windows 2008 Standard R2, still getting same error. Since Cisco's minimum requirement is Windows 2008 Standard and Enterprise with Service Pack 1 and Service Pack 2 (32 and 64 bit).
View 2 Replies View RelatedHome Network :: Clear Operating System Firewall
Sep 16, 2012I am redoing my homes networking and I am looking for a firewall. I heard that you can install clear os on a server and use it as a firewall and a dhcp server. So i was going to install it on a rack in my server cabinet. does the server need to have a wan port and a lan port? Or how does the server get connected? So, so far its the cable modem into the clear os firewall and then into my switch. Is is possible to use the clear os server as the dhcp server for the whole house? From the switch I am going to connect the rest of my servers, and the rest of the house. I was going to connect two wireless routers for my house. Would that work with the clear os server?
View 2 Replies View RelatedConnect Belkin To Linux Mint 14 Operating System?
Jan 3, 2013i am having trouble connecting my belkin router to my linux mint 14 operating system
View 1 Replies View RelatedWireless Modem Keeps Reset / Rebooting
Dec 18, 2011I've been having this problem the past 2 days. around 7-7:30pm my motorola sbg6580 will reboot itself every 15m or so the rest of the night.I've checked all my line they are in good condition, I've done the whole pull out all the cords let it sit for 1 minute, I've factory reset it.called the cableone tech support and it even reset while i was on the phone with him. I have a tech coming out tuesday but if it's something i can troubleshoot and fix now i'd rather have that.
View 2 Replies View RelatedCisco :: L-PI-1.1-CM-500 / Prime Infrastructure 1.x Server Requirements And Operating System?
Feb 2, 2013I need to order LMS for one of our customer with 500 devices and reporting capabilities ..... So i chose base license "R-PI-1.1-K9" and 500 device license "R-PI-1.1-500-K9" and Compliance Management - 500 Device License "L-PI-1.1-CM-500"? i tried to search server capability for my requirements & Operating system and couldn't find it .....
1) What is the server requirements ?
2) What is operating system (windows 2008 or VMWare VMware ESX/ESXi Version 4.1 or 5.0)
3) Is their any dedicated appliance from Cisco ?
Dell :: Dimension 2400 - Internet Connect-ability / New Operating System?
Aug 2, 2012I just got my dell dimension 2400 up n running again.
1) I need a new operating system . i know how to do that what with windows being designed to make computers work properly or what is the latest thats not vista or could i just get a copy from a friend? <--- that may not be particularly legal but idc i just want to know if it would work if a new disk is too expensive
2) I need internet connectability i have a working att wireless router brand new just got delivered today and i have a d link wireless reciever thing i just got from my buddy but how to get the internet up n running without boring holes in the floor / wall or dragging a cable 18 miles from the router to the computer so i need it to be wireless
3) I am not sure what to do with it do i just need soft ware updates or do i need hardware updates to get it up to speed with the so called "big boys even though its far larger than any laptop my goal is to have a fast running internet capable game capable and multitasking computer with which i can do.
Cisco Switching/Routing :: WS-C2950-24 - What Last Reset From System-reset Means
Dec 10, 2012Does any know what " Last reset from system-reset " means? Is this becouse of a power failure or someone reloading the switch?
View 3 Replies View RelatedCisco WAN :: Retaining System Logging Message History After Rebooting 3845
Oct 12, 2011For some reason I am unable to retain the system message logging and config archive references after a reboot of the router. I need to be able track config changes and retain the ability for the customer to recover the original config should they destroy the config through any misguided fiddling on their part. There is no remote management and these router need to be recoverable. I know this used to configured by default on earlier routers as I've checked on teh ones we have, but checking through the configuration has not worked and i have everything configured the same but system messages are still lost on reboot. Im using Cisco 3845 running IPbase 12.4(3) and the config i have is shown below.
Logging buffered 4096 debugging
no logging console
!
!
Archive
Log config
Logging enable
Logging size 100
Notify syslog
Hidekeys
Path flash:archive-config
!
Logging history size 200
Logging facility local6
Belkin Routers :: F5D8236 Rebooting Itself Because Of Reset Button
Apr 22, 2013Why My Belkin Router F5D8236-4 Ver 2 always rebooting itself. the router lamp is on and then the security lamp is on and then the router rebooting itself. this happening because im push the reset button. im already try to upgrade the firmware with recovering tool (Boot Loader / Tiny Kernel Version v0.02) from 192.168.2.1 but the problem still happening.
View 3 Replies View RelatedCisco Switching/Routing :: System Returned To ROM By Reset SP Error Of 7606-S
Jan 15, 2012I have my router 7606-S rebooted by itself. According to output of show version command it's rebooted by software bug.
================ Snipped from crashinfo file =================
Jan 14 05:33:50.822 GMT+7: %C7600_MEM_ECC-2-MBE: Multiple bit error detected at 0xC09F4D38
Jan 14 05:33:50.822 GMT+7: %C7600_MEM_ECC-3-SYNDROME_MBE: 8-bit Syndrome for the detected Multi-bit error: 0x0
05:33:50 GMT+7 Sat Jan 14 2012: Unexpected exception to CPU: vector 1500, PC = 0xB7922BC , LR = 0xB792250
==================== Show Version ======================
Cisco IOS Software, c7600rsp72043_rp Software (c7600rsp72043_rp-ADVENTERPRISEK9-M), Version 15.1(1)S1, RELEASE SOFTWARE (fc1)
Technical Support: [URL]
Copyright (c) 1986-2011 by Cisco Systems, Inc.
Compiled Thu 10-Feb-11 19:27 by prod_rel_team
ROM: System Bootstrap, Version 12.2(33r)SRD5, RELEASE SOFTWARE (fc1)
BOOTLDR: Cisco IOS Software, c7600rsp72043_rp Software (c7600rsp72043_rp-ADVENTERPRISEK9-M), Version 15.1(1)S1, RELEASE SOFTWARE (fc1)
[Code]...
Linksys Wireless Router :: E4200v2 Keeps Rebooting
Mar 16, 2012Recieved this E4200 as a repplacement for a v1 that kept dropping wireless connection. Now after about 1.5 months the router keeps rebooting. Tried resetting, etc...no luck. Calling Cisco now.
View 3 Replies View RelatedConnecting Two Laptops Via Router With Different Operating Systems?
Jan 3, 2012I'm adding a router to my existing Win XP Home laptop in order to communicate with a new Dell Inspiron Win 7 laptop and want to be able to access the internet from both. My Netgear Router is setup and working and both laptops recognize the net. How do I get the Win 7 unit to access the net and e-mail?
I use Windstream as my ISP but I use AOL for e-mail. Am I trying to do something that cannot be done?
Linksys Wireless Router :: E4200 Rebooting After 1.0.02 Update
Jul 24, 2011I recently updated the firmware to 1.0.02 on my E4200 and since then it's been rebooting randomly about once a day. It was working perfectly fine before the firmware update.
View 5 Replies View RelatedLinksys Wireless Router :: EA4500 Permanently Rebooting?
Nov 23, 2012I have a problem with my EA4500. Router permanently rebooting. - router is not visible on the network. Ping to 192.168.1.1 - loss of all packets; - hard reset (30/30/30) does not work.
View 9 Replies View RelatedLinksys Wireless Router :: EA-4500 Freezes When Rebooting
Aug 4, 2012I just bought an EA-4500 and i am having problems with rebooting the device. Every time I change a setting and the router reboots it never starts up again - and the logo LED doesn't flash, it is on constant. I have to cut the power and wait for about 15 minutes, and then it boots up fine - logo flashing and all.
View 5 Replies View RelatedLinksys Wireless Router :: E4200 V1 Rebooting / Losing Connection?
Jul 5, 2012I have an E4200 v1 wireless router. Intermittently, my hard wired laptop (and hard wired desktop) loose Internet connnectivity and when I look at the 4200 I see the status light flashing slowly like it was just rebooted. I am runnong 1.0.04, have reset to factory, reflashed the 1.0.04 code and done a 30-30-30 reset (so far no drops since the 30-30-30 reset but we'll see).
View 9 Replies View RelatedLinksys Wireless Router :: E4200 Rebooting Every Time It Sees Traffic On Any Port
Jun 15, 2012My E4200 is rebooting every time it sees traffic on any port, including the internet port. It does not reboot itself if there is nothing plugged in.
Already tried: soft reset (power off for 30 seconds), soft reboot via back panel button, hard reset (press reset for 30, unplug and hold reset for 30, plug in while holding reset for 30).
D-Link DIR-825 :: Clients (wired And Wireless) To Loss Connectivity / Router Rebooting Itself Periodically
Aug 6, 2010As I continue to have various issues with my revision A version of the DIR-825, does an updated firmware is in the works? Or has revision A been DE-supported by Dlink?
I'm still having issues with: Share port printer no longer being recognized/usable until router rebootedLoss/overload of router which causes all clients (wired and wireless) to loss connectivity Router rebooting itself periodically
Cisco Wireless :: 1131Ag Showing Operating Status Down
Feb 16, 2010I have a Cisco 2106 WLC, and a 1131ag Access Point. The 802.11a/g Radio "Operational Status" = DOWN. All other Radios are UP. I'm wondering if this is normal behavior as no clients are connecting to it over the 802.11a/g Radio.
View 8 Replies View RelatedLinksys Wireless Adapters :: How To Select Operating Channel On AE3000
Jul 18, 2012I have an AE3000 dual band wireless adapter using the Win 7 Pro OS. At work our routers all use the same SSID, but utilize different channels. In terms of signal strength, the strongest signal is usually, but not always, one of the channels on the 2.4GHZ band (usually 11). However, in terms of speed of connection and lack of overcrowding, the best signal is invariably one the channels on the 5GHZ band (usually 161). My AE3000 will inevitably connect to the strongest signal (channel 11) even though it only slightly stronger than the signal on channel 161 and furnishes a much slower connection than that obtainable on channel 161. Is there any way I can "force" the AE3000 to connect via channel 161 rather than channel 11?
View 6 Replies View RelatedCisco Wireless :: AP1262N-E-K9 Access Point With Firmware Version 12.4(25d)JA1 Operating In Autonomous Mode
Jan 10, 2013we have a couple of AP1262N-E-K9 access point with firmware version 12.4(25d)JA1 operating in autonmous mode.
I attempted to measure the signal quality between the APs by setting one device to repeater mode while all others are in root mode. Then, I execute the following command: dot11 Dot11Radio 0 antenna-alignment
1. The output of "show dot11 antenna-alignment" is incorrect, the % value represents the signal strength in dBm without the - (minus). E.g. "-25 dBm" is displayed as "Signal 25% 0 dBm".Now, I know that is only a display error but still this is not clean. Is this a known issue?
2. Why are the measured signal strength values not displayed on the SSH console during the antenna-alignment test? Is it obligatory to use the console to see these values? Or is it also a known bug which might be fixed in later firmware versions?
D-Link DIR-655 :: Router Needs Constant Rebooting?
Jan 30, 2012I just got a DIR-655, and I got it working, with some effort. However, the wifi stops connecting to the internet every few hours and requires a reboot. Only a reboot of the wifi portion of the router's software, I go to Manual Wireless Connection Setup and save it without changing anything. LAN connections don't experience this.
Comcast Cable connection
DIR-655
Hardware Version: B1
Firmware Version: 2.00NA
TP-Link 3G/3.75G Router :: MR3040 Rebooting With E1752?
Apr 13, 2013Region : Others
Model : TL-MR3040
Hardware Version : V2
Firmware Version : 3.14.4. Build 121017 Rel 62268n
ISP : CellC
I bought the MR3040 to use only with battery but now my if used with 3G stick E1752 it reboots. If I use a powered hub then it works.
I thought this devive was a mobile device, now it seems I need external power.
Cisco WAN :: 3845 Router Which Is Continuously Rebooting
May 2, 2011I have 3845 Router which is continuously rebooting; console output is attached.
View 8 Replies View RelatedCisco Routers :: RV042 VPN Router Keeps Rebooting
Mar 21, 2012I have a Linksys RV042 10/100 4-Port VPN Router with Firmware Version 1.3.13.02 and l have noticed that the Router keeps rebooting on average every couple of hours.We have it setup for Load Balancing 2 ADSL Services.
View 3 Replies View RelatedCisco Routers :: WRVS4400N V2 - Router Keeps Rebooting
Nov 28, 2012I've got a WRVS4400N V2 Router that just keeps rebooting itself. It powers up, the red LED stays lit, it gets part way through the boot process and reboots itself. I would like to try to re flash the device, but don't know if this is possible in the condition that it is in.
View 3 Replies View Related
