I am getting following error during installation of LMS 4.0. ( "CWLMS-4.0-100-K9").I have installed SP1 for the Windows 2008 Standard R2, still getting same error. Since Cisco's minimum requirement is Windows 2008 Standard and Enterprise with Service Pack 1 and Service Pack 2 (32 and 64 bit).
View 2 RepliesI was wondering if it is possible to install a certain operating system on a network HDD. any possible install a virtual machine or use that as a remote desktop to retrieve on a ipad.
View 1 Replies View RelatedHow to share files btween XP & Win98 operating systems , 2 towers
View 1 Replies View RelatedI am redoing my homes networking and I am looking for a firewall. I heard that you can install clear os on a server and use it as a firewall and a dhcp server. So i was going to install it on a rack in my server cabinet. does the server need to have a wan port and a lan port? Or how does the server get connected? So, so far its the cable modem into the clear os firewall and then into my switch. Is is possible to use the clear os server as the dhcp server for the whole house? From the switch I am going to connect the rest of my servers, and the rest of the house. I was going to connect two wireless routers for my house. Would that work with the clear os server?
View 2 Replies View RelatedI might have to reboot my operating system, I have a Cisco wireless router, so I have to reset it, and set it up again after i reboot my operating system?
View 8 Replies View Relatedi am having trouble connecting my belkin router to my linux mint 14 operating system
View 1 Replies View RelatedI need to order LMS for one of our customer with 500 devices and reporting capabilities ..... So i chose base license "R-PI-1.1-K9" and 500 device license "R-PI-1.1-500-K9" and Compliance Management - 500 Device License "L-PI-1.1-CM-500"? i tried to search server capability for my requirements & Operating system and couldn't find it .....
1) What is the server requirements ?
2) What is operating system (windows 2008 or VMWare VMware ESX/ESXi Version 4.1 or 5.0)
3) Is their any dedicated appliance from Cisco ?
Im trying to install the e2500 router on my sisters macbook, but it says it is an "unsupported operating system". She has operating system 10.8.1. Why am i not able to install It?
View 1 Replies View Relatedwpc11ver.3 / get driver for Ubuntu operating system?
View 2 Replies View RelatedI just got my dell dimension 2400 up n running again.
1) I need a new operating system . i know how to do that what with windows being designed to make computers work properly or what is the latest thats not vista or could i just get a copy from a friend? <--- that may not be particularly legal but idc i just want to know if it would work if a new disk is too expensive
2) I need internet connectability i have a working att wireless router brand new just got delivered today and i have a d link wireless reciever thing i just got from my buddy but how to get the internet up n running without boring holes in the floor / wall or dragging a cable 18 miles from the router to the computer so i need it to be wireless
3) I am not sure what to do with it do i just need soft ware updates or do i need hardware updates to get it up to speed with the so called "big boys even though its far larger than any laptop my goal is to have a fast running internet capable game capable and multitasking computer with which i can do.
I am facing problem with 7600-ES+20G3C card / Any system reset will change the system operating mode
View 2 Replies View RelatedI will be updating from 3.2 to 4.1?Is there perhaps some documentation for this procedure?
View 1 Replies View Relatedbefore i have problem, i installed CWLMS3.2 and ACS 4.2 and everything is ok, but after upgrade, ACS 4.2 to ACS 5.2, CWLMS can't authenticate to devices and get their configuration. i checked everything include creadential, and i debuged aaa authentication and tacacs on devices. it seems devices can not get username from CWLMS. also i run putty on CWLMS server and try to telnet to devices with ACS username nad password, and the result, there is no problem, and i can telnet to device with ACS username and password without any problem.
the below text is the output of debug on devices when CWLMS try to archive configuration:
R#
Aug 27 05:10:11.571: AAA/BIND(00000064): Bind i/f
Aug 27 05:10:11.571: AAA/AUTHEN/LOGIN (00000064): Pick method list 'CACS'
Aug 27 05:10:11.575: TPLUS: Queuing AAA Authentication request 100 for processing
Aug 27 05:10:11.575: TPLUS: processing authentication start request id 100
Aug 27 05:10:11.575: TPLUS: Authentication start packet created for 100()
[code]...
I have CWLMS-3.0-5K-K9 with licence file but I can't install it in the VM ( the version didn't support virtualisation vmware).
View 4 Replies View RelatedIs it possible to run an uptime report using CWLMS 3.2 ?
View 2 Replies View RelatedWe are using CWLMS 2.6 on a UNIX machine. And recently we changed the SNMP String to our network devices. One of L2 switches keeps logging the following message:
%SNMP-3-AUTHFAIL: Authentication failure for SNMP req from host 10.x.x.1
Where 10.x.x.1 is ciscoworks LMS server. I found a solution on many sites that suggest resetting DFM database. I stopped first the daemon manager and tried to apply the perl script:
perl dbRestoreOrig.pl dsn=dfmInv dmprefix=INV npwd=cisco
but it gives me the following error:
Can't locate CRM.pm in @INC (@INC contains: /usr/perl5/5.6.1/lib/sun4-solaris-64int /usr/perl5/5.6.1/lib /usr/perl5/site_perl/5.6.1/sun4-solaris-64int /usr/perl5/site_perl/5.6.1 /usr/perl5/site_perl /usr/perl5/vendor_perl/5.6.1/sun4-solaris-64int /usr/perl5/vendor_perl/5.6.1 /usr/perl5/vendor_perl .) at dbRestoreOrig.pl line 31.
BEGIN failed--compilation aborted at dbRestoreOrig.pl line 31.
CRM.pm already exists in the path ENV{NMSROOT}/lib/perl/db
At line 31 of dbRestoreOrig.pl – the error – I found the following:
push(@INC, "$ENV{NMSROOT}/cgi-bin/dbadmin/pdbadmin");
use lib "$ENV{NMSROOT}/lib/perl/db";
I gave the system the path of NMSROOT and run the script again but it gives me the same error “Can't locate CRM.pm”
I'm looking for Cisco works 4.1, but has the following problem:
i bought the product CWLMS-3.2-300-K9, this was related to my account in Cisco, i mean, it was registered correctly. now, the thing is that i need to download the version 4.1 in order to install it, but don't have access.
is correct the steps i followed?, what else i must do??
I have a Linksys E4500 as the main router and would like to use the WRVS4400N as a bridge to extend the range of my network and also attach a NAS to it. Is this possible? I've been trying different options but have been unsuccessful.
View 1 Replies View RelatedI am on my home network and I do have a Windows 2008 Server and hopefully I will have another one soon. I also have 2 windows xp machines and 2 windows 7 machines and a non-operating server.
View 6 Replies View RelatedI need to know in what operating systems Windows or Linux I can install the WCS WCS-PLUS-UPG-100. [code]
View 8 Replies View RelatedI have a Cisco 2106 WLC, and a 1131ag Access Point. The 802.11a/g Radio "Operational Status" = DOWN. All other Radios are UP. I'm wondering if this is normal behavior as no clients are connecting to it over the 802.11a/g Radio.
View 8 Replies View RelatedI'm adding a router to my existing Win XP Home laptop in order to communicate with a new Dell Inspiron Win 7 laptop and want to be able to access the internet from both. My Netgear Router is setup and working and both laptops recognize the net. How do I get the Win 7 unit to access the net and e-mail?
I use Windstream as my ISP but I use AOL for e-mail. Am I trying to do something that cannot be done?
I have an AE3000 dual band wireless adapter using the Win 7 Pro OS. At work our routers all use the same SSID, but utilize different channels. In terms of signal strength, the strongest signal is usually, but not always, one of the channels on the 2.4GHZ band (usually 11). However, in terms of speed of connection and lack of overcrowding, the best signal is invariably one the channels on the 5GHZ band (usually 161). My AE3000 will inevitably connect to the strongest signal (channel 11) even though it only slightly stronger than the signal on channel 161 and furnishes a much slower connection than that obtainable on channel 161. Is there any way I can "force" the AE3000 to connect via channel 161 rather than channel 11?
View 6 Replies View RelatedI am going to be putting an SG200-08 (8 port switch) inside a 2U rack mount chassis. To enhance cooling I thought I would remove the outer case. Are there, or would there be any issues with using the switch with the cover removed?
View 2 Replies View RelatedMy computer is a Toshiba Sattelite o/s win 7. My wi fi signal is excellent, yet my signal keeps dropping or saying limited access.I have tried resetting the router and resetting my default windows settings on the computer. All other lap tops and wireless devices in the house do not have an issue.I discovered the other day as long as the laptop ( not the router) is plugged in and not running on batter power that i do not have a problem staying connected.For fun i wondered if it had something to do with the power cord making some kind of connection when plugged into the lap top, (since everything is more compact in them)I tried having the power cord plugged into the lap top but not into a power source but I still lost signal.
View 1 Replies View Relatedwe have two 6509E which are configured in VSS mode with the following modules in each:
1 48 CEF720 48 port 10/100/1000mb Ethernet
2 8 DCEF2T 8 port 10GE
3 4 CEF720 4 port 10-Gigabit Ethernet
5 5 Supervisor Engine 2T 10GE w/ CTS (Acti VS-SUP2T-10G
I need to know if the temperature of the attached modules are normal or there is a problem?
the status of one of the supervisor engines is "MajFail" as shown below:
Mod Online Diag Status
---- -------------------
1 Pass
2 Pass
3 Pass
5 Major Error
we have a couple of AP1262N-E-K9 access point with firmware version 12.4(25d)JA1 operating in autonmous mode.
I attempted to measure the signal quality between the APs by setting one device to repeater mode while all others are in root mode. Then, I execute the following command: dot11 Dot11Radio 0 antenna-alignment
1. The output of "show dot11 antenna-alignment" is incorrect, the % value represents the signal strength in dBm without the - (minus). E.g. "-25 dBm" is displayed as "Signal 25% 0 dBm".Now, I know that is only a display error but still this is not clean. Is this a known issue?
2. Why are the measured signal strength values not displayed on the SSH console during the antenna-alignment test? Is it obligatory to use the console to see these values? Or is it also a known bug which might be fixed in later firmware versions?
can wireless router support up to 100 user including support network printer
View 1 Replies View RelatedI am not able to RDP from xp system
View 1 Replies View Relatedmy system ip not able to ping by other system in my company network but my system is in the network and able to ping other system in the network my system IP have static IP and IP is pinging on by server
View 1 Replies View RelatedI have a situation, where I dont need email and where is no SMTP server in this network, but I need CCO-access for EoX/PSIRT from LMS. Because both settings are in the same menu and LMS4.0.1 does real TCP:25 checking for given SMTP-server before can apply, I cant save my CCO-credentials. What can I do?
View 1 Replies View Relatedwe cant create EoX and PSIRT reports For Job-Log please see attached 1007.1.log.Patch lms40x-win-CSCto46927-0 has been installed already.CCO-Credentials + Proxy-settings in LMS must be oK, because we are able to auto download device packages for instance.
View 4 Replies View Relatedwe just purchased 2 asa 5585-40's and tried to add them to our lms 3.2 system and we were informed by cisco tac that they were not supported in lms 3.2. since we don't having funding for an upgrade, any work around within lms that could allow me to add the devices so i can use lms for syslog and to fetch the firewall configs on a regular basis, instead of having to setup a seperate syslog server and having to tftp the config's everytime i make a change.
View 3 Replies View Related