Cisco :: Install CWLMS-3.0-5K-K9 On VM
Apr 3, 2012I have CWLMS-3.0-5K-K9 with licence file but I can't install it in the VM ( the version didn't support virtualisation vmware).
View 4 Replies
ADVERTISEMENT
Cisco :: Upgrade CWLMS 3.2 To 4.1?
Jul 11, 2011I will be updating from 3.2 to 4.1?Is there perhaps some documentation for this procedure?
View 1 Replies View RelatedCisco :: Getting CWLMS 3.2 And ACS 5.2 Authentication?
Aug 26, 2011before i have problem, i installed CWLMS3.2 and ACS 4.2 and everything is ok, but after upgrade, ACS 4.2 to ACS 5.2, CWLMS can't authenticate to devices and get their configuration. i checked everything include creadential, and i debuged aaa authentication and tacacs on devices. it seems devices can not get username from CWLMS. also i run putty on CWLMS server and try to telnet to devices with ACS username nad password, and the result, there is no problem, and i can telnet to device with ACS username and password without any problem.
the below text is the output of debug on devices when CWLMS try to archive configuration:
R#
Aug 27 05:10:11.571: AAA/BIND(00000064): Bind i/f
Aug 27 05:10:11.571: AAA/AUTHEN/LOGIN (00000064): Pick method list 'CACS'
Aug 27 05:10:11.575: TPLUS: Queuing AAA Authentication request 100 for processing
Aug 27 05:10:11.575: TPLUS: processing authentication start request id 100
Aug 27 05:10:11.575: TPLUS: Authentication start packet created for 100()
[code]...
Cisco :: Uptime Report Using CWLMS 3.2
May 6, 2012Is it possible to run an uptime report using CWLMS 3.2 ?
View 2 Replies View RelatedCisco :: Re-initialize The DFM Database For CWLMS 2.6
Jan 29, 2012We are using CWLMS 2.6 on a UNIX machine. And recently we changed the SNMP String to our network devices. One of L2 switches keeps logging the following message:
%SNMP-3-AUTHFAIL: Authentication failure for SNMP req from host 10.x.x.1
Where 10.x.x.1 is ciscoworks LMS server. I found a solution on many sites that suggest resetting DFM database. I stopped first the daemon manager and tried to apply the perl script:
perl dbRestoreOrig.pl dsn=dfmInv dmprefix=INV npwd=cisco
but it gives me the following error:
Can't locate CRM.pm in @INC (@INC contains: /usr/perl5/5.6.1/lib/sun4-solaris-64int /usr/perl5/5.6.1/lib /usr/perl5/site_perl/5.6.1/sun4-solaris-64int /usr/perl5/site_perl/5.6.1 /usr/perl5/site_perl /usr/perl5/vendor_perl/5.6.1/sun4-solaris-64int /usr/perl5/vendor_perl/5.6.1 /usr/perl5/vendor_perl .) at dbRestoreOrig.pl line 31.
BEGIN failed--compilation aborted at dbRestoreOrig.pl line 31.
CRM.pm already exists in the path ENV{NMSROOT}/lib/perl/db
At line 31 of dbRestoreOrig.pl – the error – I found the following:
push(@INC, "$ENV{NMSROOT}/cgi-bin/dbadmin/pdbadmin");
use lib "$ENV{NMSROOT}/lib/perl/db";
I gave the system the path of NMSROOT and run the script again but it gives me the same error “Can't locate CRM.pm”
Cisco :: CWLMS-3.2-300-K9 - Download Version 4.1
Aug 9, 2011I'm looking for Cisco works 4.1, but has the following problem:
i bought the product CWLMS-3.2-300-K9, this was related to my account in Cisco, i mean, it was registered correctly. now, the thing is that i need to download the version 4.1 in order to install it, but don't have access.
is correct the steps i followed?, what else i must do??
Cisco :: Operating System Support For CWLMS-4.0-100-K9?
Aug 24, 2011I am getting following error during installation of LMS 4.0. ( "CWLMS-4.0-100-K9").I have installed SP1 for the Windows 2008 Standard R2, still getting same error. Since Cisco's minimum requirement is Windows 2008 Standard and Enterprise with Service Pack 1 and Service Pack 2 (32 and 64 bit).
View 2 Replies View RelatedCisco WAN :: How To Install IOS To 881-W
Feb 8, 2012I formatted flash and now I need to install IOS .
I know than I have to do it using TFTPD, but I cant connect my PC and cisco.
On cisco throught console in putty I wrote :
rommon 1 > set
rommon 2 > IP_ADDRESS=10.10.10.2
rommon 3 > IP_SUBNET_MASK=255.255.255.0
[Code]......
Cisco :: Cannot Login To LMS 4.2 Via Web After New Install
Jun 4, 2012I can login into the console just fine but if I try and login into the server via the web [URL] it tells me invalid username or password.
During setup I left the username default and set the password. Then it asked me for the password to login to the web but it never asked me the username to use. I have to set this up very soon.
Cisco :: UCS Support For ISO Install LMS 4.1
Jan 26, 2012can we install the ISO LMS 4.1 directly on a UCS platform?What platform UCS is supported?Do you have install experiences you can share?Is the ISO LMS 4.1 a Linux implementation?
View 6 Replies View RelatedCisco :: LMS3.2 Install Without DNS
Jan 18, 2012Got following problem with an LMS server that is installed without DNS server in the network, because this customer doesnt own and doesnt need any.
CS,CM,CV is working and contains devices, but RME (cannot connect to db) and DFM (TIS URN found) not. pdshow and dbRestoreOrig.pl after calling, hangs for ever.
To loose no further time with troubleshooting, I want to reinstall LMS from the scratch.
But I dont want to setup an DNS server just for resolving the only IP-Adresse from LMS server for self purpose only. Do I need an entry in driversetchosts for LMS server itself?
<IP> <Name> <Name>.<Fake-and-complete-unimportend-domin>
Do I need a fake-Domain? or can Domain be empty?
OS=Win2008,R1,SP1 as Standaloneserver (WORKGROUP)
Cisco :: To Install LMS 4.1 With Evaluation
Dec 27, 2011I would like to install the LMS 4.1 (EVAL-LMS-41), the evaluation one, and want to know what are the minimum and recommended requirements for a Windows machine.
View 1 Replies View RelatedCisco VPN :: ASA 8.4 How To Install New License
May 31, 2012i have two asa runnig 8.4 configured as Active/Standby Now i received a new Anyconnect license, how do i install the new license?Install the activation key on the Active and Standby unit.Install the activation key on the Active unit only.
View 1 Replies View RelatedWay To Install WAP
Jan 18, 2013One of my friend wants to install 1 Router, Switches (Several groups), and 2 or more WAPs (Wireless Access Point) (Several groups).He knows that he has to install switch under router.But he was wondering where he should install the WAPs.And he is let each individual groups to use 1 WAP/Switches per group.So, where/how does my friend suppose to install the WAP?
View 2 Replies View RelatedHow To Install A LAN
Feb 24, 2011how to install a LAN
View 2 Replies View RelatedCisco :: What Vmware Have To Use To Install Cucm 7
Apr 18, 2012What vmware i have to use to install cucm 7. vmware workstation 7 or vmware server or exsi 4 or 5. Any correct link to download and vmware config settings.
View 2 Replies View RelatedCisco AAA/Identity/Nac :: Install Certificates On ACS 5.2
Jan 31, 2012I have generated request and our CA server gave us two files, one is certificate from CA itself, one is the certificate CA created for the ACS. I used the "Bind CA Signed Cerficate" under "local certificated"Option to bind the latter. it shows successful.and a web access from any pc will give you error info, "that the security certificate presented by this website was issued for a different website's address." And all the while I dont know how to deal with the other file, which is "Internal CA certificates" I was try to use the first option import server option, but it seems not right,
View 1 Replies View RelatedCisco Application :: How To Install New 4710 Ace
Feb 2, 2013i'm looking for a recommendation for a setup guide including ft i've had a quick look a wiki and i can get basics but i'm not sure about if i need to setup additional contexts etc when i'm the only one using the appliance?
View 2 Replies View RelatedCisco WAN :: 7606-S Planning To Install New IOS
Sep 18, 2012I have a fresh piece of 7606-S router, i am planning to install a new IOS ( 15.2.4S or 12.2.33-SRD8 ) SIP-200 / RSP720 moduls ... would ypu plese provides me a configuration guide for installing IOS for 7600 serise router.I have the image on TFTP server.
View 3 Replies View RelatedCisco WAN :: Install License On 1921 With USB
May 12, 2013how install a .lic file onto the new Cisco ISR G2 1921?
I know how to install via tftp, however I need to know how to install from USB.
Cisco VPN :: 2911 / Cannot Install VPN License
Nov 20, 2011I purchased a 2911 router and a 25-pack of VPN licenses (PID: L-FL-SSLVPN25-K9=).I registered the license, and supplied the serial number of my router when asked.I received a .lic license file.When I attempt to install the license on the appliance, I receive an error:
% Error: Install failed. UDI L-FL-SSLVPN25-K9=:FTX1542AKJ3 on license does not m
atch any device
0/1 licenses were successfully installed
0/1 licenses were existing licenses
1/1 licenses were failed to install
However, the following establishes that the serial number is correct:
SFGallery#show inventory
NAME: "CISCO2911/K9 chassis", DESCR: "CISCO2911/K9 chassis"
PID: CISCO2911/K9 , VID: V04 , SN: FTX1542AKJ3
NAME: "C2911 AC Power Supply", DESCR: "C2911 AC Power Supply"
PID: PWR-2911-AC , VID: V03 , SN: AZS153303LY
Cisco :: Unable To Install Prime 4.2.1
Jul 1, 2012i´m trying to install Cisco Prime 4.2.1 but i´m getting following error.
View 1 Replies View RelatedCisco :: Can Install LMS 4.0 On Domain Server
Oct 10, 2012I just wanted to know that can I install LMS 4.0 on a domain server.
View 1 Replies View RelatedCisco WAN :: Install Second SUP-engine In 7609?
Feb 3, 2013In my existing production router 7609 of my company, sup-engine already fixed in slot 5 with SRC2 12.2(33) IOS and I need to insert another sup engine in slot 6 with SRE7 IOS code image and after this, again sup engine in slot 5 must be with SRE7 IOS image...(also I have extra sup engines with SRE 7 code image ready with me) Query:i am going to offload router before proceed for this activity?i will insert new sup engine in slot 6 with SRE 7 ios image and now i need to re-install spare sup engine with SRE 7 code readily available with me by removing existing sup engine from slot 5 (Active) so what will be the proceedure to insert new sup engine with SRE 7 code in slot 5 and slot 6 with minimum downtime of router?
existing setup sup engine in slot 5 with SRC2 12.3 (old hardware) slot 6 is EMPTY
final result should be like this: sup engine in slot 6 with SRE 7 (new hardware)
sup engine in slot 5 with SRE 7 (new hardware)
Cisco VPN :: ASA 5510 - Can't Install CSD Image
Jun 12, 2013I'm facing the problem that I can't install an CSD Image on the asa. Got the error:
[OK] webvpn
webvpn
[ERROR] csd image disk0:/csd_3.6.181-k9.pkg
The disk is (or was) full during extraction.
ASA 5510 has 256MB RAM, 1024MB Flash, ASA Version 8.2(5)41, ASDM 7.1(3)
Cisco Wireless :: Install BR1310 For WLC?
May 16, 2012I have a project ahead and I need to clarify some things before starting this project. I will install a new WLC 5508 and I have 8 AIR-BR1310G-A-K9-R, so Im wondering if I can use them.
- Can this model be converted to LAP?, right now they are autonomous.
- I need to used them as AP not bridge and under the governance of a WLC. Could this be possible?
- The intention is to use them for outdoor operation. Should I use one or two outdoor antennas?.
- ANT-2506 could be a good choice?.
Cisco AAA/Identity/Nac :: How To Install ACS 5.X Backup
Sep 4, 2011I have ACS 5.2 in standalone mode in operation and need not incorporating a second server for high availability ACS, the new ACS is a version 5.1
What should I do first, upgrade the ACS version 5.2 and created the high availability or high availability and get up after the upgrade?
Cisco VPN :: AnyConnect 2.5.3054 Can't Install
Aug 22, 2011Several users on my network have been utilizing the Cisco Anyconnect client. Recently, an update came out and automatically tried to install. The installation failed, and now the old version is uninstalled and we can't install it again. When we try to install the client, the log below is what we get. What I can do to get it to stop (short of reimaging all 8 machines experiencing this problem)?
View 1 Replies View RelatedCisco :: LMS4.0 Not Install All Functionality
Oct 19, 2010With lms 3.2 during installation we can choose what to install i.e. not install DFM or IPM.
How can we do this in the new release 4.0 of the LMS bundle. I saw no options for it during installation of the new server.
Cisco Wireless :: Install AC 3.1 On Windows 7 64-bit?
Sep 7, 2012I am trying to install AC3.1 on windows7 64-bit. But i get the error installation ended prematurely without any reasons for failure. I posted the errors here. I tried installing AC3.0 on windows xp and i get same problem. NAM is not getting installed . I just want to use the AC client to connect to wireless network.
View 2 Replies View RelatedCisco :: LMS 4.0 Is Not Starting - Fresh Install
Oct 20, 2012I've freshly installed LMS 4.0 on VM server 2003 R2, after entering login details I'm getting the error Internet Explorer cannot display the webpage
View 3 Replies View RelatedUnable To Install Tcp / Ip
Jan 10, 2012I have an old DOS box running MS workgroup add-on 3.11. This has been running for years with no issues until I recently installed a new Win 2008 server which does not support Netbeui. I am trying to install TCP/IP but have had no luck finding the 16 bit version of tcp. I can succesfully add the 32 bit stack, but the nic doesn't like it. Has any ever run into this problem before?
View 3 Replies View RelatedInstall An OS To Remote PC?
May 2, 2011Is it possible that i can install an OS such as XP to Remote PC?
View 11 Replies View Related