i have two asa runnig 8.4 configured as Active/Standby Now i received a new Anyconnect license, how do i install the new license?Install the activation key on the Active and Standby unit.Install the activation key on the Active unit only.
View 1 Replieshow install a .lic file onto the new Cisco ISR G2 1921?
I know how to install via tftp, however I need to know how to install from USB.
I purchased a 2911 router and a 25-pack of VPN licenses (PID: L-FL-SSLVPN25-K9=).I registered the license, and supplied the serial number of my router when asked.I received a .lic license file.When I attempt to install the license on the appliance, I receive an error:
% Error: Install failed. UDI L-FL-SSLVPN25-K9=:FTX1542AKJ3 on license does not m
atch any device
0/1 licenses were successfully installed
0/1 licenses were existing licenses
1/1 licenses were failed to install
However, the following establishes that the serial number is correct:
SFGallery#show inventory
NAME: "CISCO2911/K9 chassis", DESCR: "CISCO2911/K9 chassis"
PID: CISCO2911/K9 , VID: V04 , SN: FTX1542AKJ3
NAME: "C2911 AC Power Supply", DESCR: "C2911 AC Power Supply"
PID: PWR-2911-AC , VID: V03 , SN: AZS153303LY
if i have a LMS server the newest version, and i bout Nexus 7K with its DCNM ver 5.2 (DCNM-N7K-K9) can i install the (DCNM-N7K-K9) license on the Cisco Prime LMS 4.1 Base so that i can manage Nexus through LMS?if this works Can I manage all Nexus switches also?
View 5 Replies View RelatedCan i install Cisco prime infrastructure 1.3 with 1.1 license.To be more precise it will be fresh installation but the licenses I have is of 1.1.As per my overview from Cisco prime Infrastructure 1.2 NCS and NCS(WAN) has been bundled into one service.But both were separate entities in Cisco Prime Infrastructure 1.1.
View 7 Replies View RelatedI have few licenses to be installed in my c2911/k9 router but there were errors while installing the license. [code]
View 5 Replies View RelatedI have a customer that has an asa5505 who purchased the ASA5500-SSL-25 license.He is now going to replace/upgrade to a 5510.Can he just install the license on the new ASA, providing that he gets some trade-in on the 5505.Does he have to purchase it all over again.
View 1 Replies View RelatedWe face following situation: Currently LMS 3.2 is installed. We order a 3.x to 4.0.1 upgrade license, in the meantime 4.1 is launched. So, we ordered the free of charge 4.0 to 4.1 minor upgrade license. Now we have a 3.x to 4.0 upgrade license and the 4.0 to 4.1 minor upgrade license and don't know how to proceed.
Is it now possible to install 4.1 from scratch directly and use the 4.0 to 4.1 upgrade license to register it? Of course we want to avoid to install 4.0 as an extra step...
I got a ISE 3315 with an IP-Plus license on it. Now I need to install a Wireless advanced license, but I got an error when trying. I've read that the wireless license doesn't need the ip-base one but I can't remove it?
View 1 Replies View RelatedI am installing the Demo version of ANM 4.3 on a virtual machine.The install was successful, however when i try to import the demo licence from my laptop to the server it does not allow me to tftp the file to the server.[URL]
View 1 Replies View RelatedWhen installing the license for a 3750-E I get an error that the license doesn't reside on the flash though dir reveals the image in flash. Seen this, know of a resolution?
View 5 Replies View RelatedI'm trying to install a license file on a 3750x stack of 4 switches. I was running IPBase but want to upgrade to IPServices.
Install a License
3750E#copy tftp flash1:
3750E#172.x.x.x
3750E#FDO1111111_201101111111111.lic
3750E# license install flash1: FDO1111111_201101111111111.lic #
I have a WLC 2504 with 5 AP licenses for which I have installed an adder license via GUI. The installation completed successfully, but I still cannot view the new license. The maximum number of APs is still showing as 5 and in fact I cannot add more that 5 APs. I tried installing the license file again, but now I get a "duplicate" error.
View 4 Replies View RelatedWhat's the difference between VPN Plus license and Security Plus license. I have new 5520 shipped with VPN Plus license.Also does it require a seperate license for Anyconnect for Mobile and AnyConnect Essentials.
View 1 Replies View RelatedI’m stuck in some problem with installation of LMS4.0 in customer site.
- we purchase a LMS4.0(CWLMS-4.0-100-K9) but couldn’t install it on Windows server 2008 R2 64bit because those things don’t support each other.
- I need to upgrade the LMS4.0 to LMS4.2 that is supporting Windows server 2008 R2 64bit.
- So, I ordered following items via product update tool (url...) [code]
- In this status, how to install LMS4.2 with license for 100 devices? If I install R-PI12-BASE-K9 first, can i enter a licese for 100 devices for CWLMS-4.0-100-K9 into PI1.2?
I would like to know if it is possible to purchase a Cisco Prime LMS 4.2 licence but use it to download and run LMS4.0. The reason for asking is we wish to run Windows Server 2003 not 2008 and LMS 4.0 is end of sale already so we can't purchase any version that will run on 2003.
View 4 Replies View RelatedIs it possible to get a PAK back from a license? For example, if the PAK is joined with the wrong serial number is there a way to revert the binding of the PAK and serial to get just the PAK again?
View 5 Replies View Relatedi have loaded a temporary 4 weeks license on a Cisco 887 router running 15 software.The license appears under temporary licenses, but the enable license is grayed out, so the sslvpn configuration section is unavailable.
View 1 Replies View RelatedCan I bind SSL license key from 1 ASA to another , we recently got 5540 and i want to use my SSL 5510 license on the new firewall
View 1 Replies View RelatedI purchased Product # FL-WEBVPN-10-K9=
What i got was a price of paper paying gratitude for purchasing a license and a CDROM with a video on Electrostatic discharge and copies of the user agreement in several languages. How do i actually activate and use this license? The router is already setup for the SSL vpn. It just doesn't connect. I am assuming it is because i have no license installed?
I have cisco asa 5505 Base Line .. so i want to buy the license key to get more features . so what is the requirments and how i can buy .
View 1 Replies View RelatedWe have LMS 4.0.1 with 300 devices license and we want to upgrade it to 4.1, pls. let me now if it's free or any cost is assocated with it.Earlier when we directly installed LMS 4.0 license on 4.1, it was not accepting.
View 1 Replies View RelatedThe license has been installed onto the router. Here is the relevant out from the show license all:
License Store: Primary License StorageStoreIndex: 0 Feature: ipbasek9 Version: 1.0 License Type: Permanent License State: Active, In Use License Count: Non-Counted License Priority: MediumStoreIndex: 1 Feature: WAAS_Express Version: 1.0 License Type: Permanent License State: Active, Not in Use License Count: Non-Counted License Priority: Medium
WAAS license as it says that this is not in use, WAAS under the interface is not possible.
If i require ACS 5.3 in HA. Do i need to procure two ACS with the add-on licenses?
View 1 Replies View RelatedI want to configure IOS SSL VPN on C1941 Router. let me know if any additional License is required for that.
View 1 Replies View RelatedI have a ASA5550 setup with two boxes in HA.I have purchased AnyConnect Essentials for 5000 users for both boxes.The box runs 8.4.2.I tried on one box to enter new activation key and rebooted the box. Still the output of show version is the same !? [code] If I re-enter the key it says same as running key.I then tried downgrade to 8.2.5, same same show version output.
View 6 Replies View RelatedOne of our clients is going to install WCS on a Vmware machine and uninstall it from the physical server. He wants to know if he can use the same license or get another one; since he will get a new Mac address with the new VmWare machine.
View 1 Replies View Relatedi have CSC-SSM-20 i want to renew the license to support 750 users for 3 years if i have base license only and if i have base and plus as bundle?i want to know the steps and also the part numbers and what is the difference between these two part numbers
ASA-CSC20-750UP-1YASA 5500 CSC-SSM-20 750-User w/ Plus Lic. Renewal (1-year)
ASA-CSC20-750P-1YASA 5500 CSC-SSM-20 750-User Plus Lic. Only Renewal (1-yr)
In previous LMS versions the DCR could hold more devices then the licenses of the other other applications permitted and using the "user defined fields" we have used it as a general device repository for some customers, pushing only the supported cisco devices to the various applications.In LMS 4 cisco has removed all allocation possebilities from the various applications and replaced it by an all or nothing type of allocation.Does this now mean that any entry in the DCR is automatically counted as a used device license?
View 1 Replies View RelatedCan i buy a plus license for asa 5520??
View 2 Replies View RelatedI have purchased a PAK for my 2 cisco 1921 routers .I would like to to configure IP SEC or SSL for VPN connectivity on the routers. How do i convert the PAK into a license?
View 1 Replies View RelatedMy customer is asking to see the license for the SSM-10 card how do i access the card to show this information. the Firewall unit has a base licence installed.
View 2 Replies View Relatedi have cisco 880 with NPE licence, but i need encryption on this device. I change IOS to c880data-universalk9-mz.151-3.T1.bin, but i still have NPE License and only Evalution without NPE. How can i have permanent license?
show license all
License Store: Primary License Storage
StoreIndex: 0 Feature: advsecurity_npe Version: 1.0
License Type: Permanent
License State: Active, Not in Use
[code]....