I have a customer that has an asa5505 who purchased the ASA5500-SSL-25 license.He is now going to replace/upgrade to a 5510.Can he just install the license on the new ASA, providing that he gets some trade-in on the 5505.Does he have to purchase it all over again.
View 1 Replieswe have a customer with a ASA 5510 with a CSC module in it. The device tells us the Base license has expired. The new license has been renewed - after - the grace period. The Trendmicro site tells us the Base license is valid until 21 october 2013 but the CSC refuses to acknowledge this. The module is able to fetch updates form the Internet so it does not look like a connection problem to me (it also has a plus license which is also valid till far into 2013 and that one works).Is it possible that the current license key is "dead" and the CSC expects a new license key because the grace period was expired?
View 1 Replies View RelatedIs it possivble to have 10 security licenses, license to a Cisco 5510 and have them transfeered to a Cisco5520?
View 1 Replies View Relatedi have two asa runnig 8.4 configured as Active/Standby Now i received a new Anyconnect license, how do i install the new license?Install the activation key on the Active and Standby unit.Install the activation key on the Active unit only.
View 1 Replies View Relatedhow install a .lic file onto the new Cisco ISR G2 1921?
I know how to install via tftp, however I need to know how to install from USB.
I purchased a 2911 router and a 25-pack of VPN licenses (PID: L-FL-SSLVPN25-K9=).I registered the license, and supplied the serial number of my router when asked.I received a .lic license file.When I attempt to install the license on the appliance, I receive an error:
% Error: Install failed. UDI L-FL-SSLVPN25-K9=:FTX1542AKJ3 on license does not m
atch any device
0/1 licenses were successfully installed
0/1 licenses were existing licenses
1/1 licenses were failed to install
However, the following establishes that the serial number is correct:
SFGallery#show inventory
NAME: "CISCO2911/K9 chassis", DESCR: "CISCO2911/K9 chassis"
PID: CISCO2911/K9 , VID: V04 , SN: FTX1542AKJ3
NAME: "C2911 AC Power Supply", DESCR: "C2911 AC Power Supply"
PID: PWR-2911-AC , VID: V03 , SN: AZS153303LY
What's the difference between VPN Plus license and Security Plus license. I have new 5520 shipped with VPN Plus license.Also does it require a seperate license for Anyconnect for Mobile and AnyConnect Essentials.
View 1 Replies View Relatedif i have a LMS server the newest version, and i bout Nexus 7K with its DCNM ver 5.2 (DCNM-N7K-K9) can i install the (DCNM-N7K-K9) license on the Cisco Prime LMS 4.1 Base so that i can manage Nexus through LMS?if this works Can I manage all Nexus switches also?
View 5 Replies View RelatedCan i install Cisco prime infrastructure 1.3 with 1.1 license.To be more precise it will be fresh installation but the licenses I have is of 1.1.As per my overview from Cisco prime Infrastructure 1.2 NCS and NCS(WAN) has been bundled into one service.But both were separate entities in Cisco Prime Infrastructure 1.1.
View 7 Replies View RelatedI have few licenses to be installed in my c2911/k9 router but there were errors while installing the license. [code]
View 5 Replies View RelatedWe face following situation: Currently LMS 3.2 is installed. We order a 3.x to 4.0.1 upgrade license, in the meantime 4.1 is launched. So, we ordered the free of charge 4.0 to 4.1 minor upgrade license. Now we have a 3.x to 4.0 upgrade license and the 4.0 to 4.1 minor upgrade license and don't know how to proceed.
Is it now possible to install 4.1 from scratch directly and use the 4.0 to 4.1 upgrade license to register it? Of course we want to avoid to install 4.0 as an extra step...
i have bought the below licenses for the ASA5510 to upgrade from 2 to 250 users and yet i can give access to 2 users only.
L-ASA-AC-M-5510=
L-ASA-AC-E-5510=
Kindly find attached the "show version"
I got a ISE 3315 with an IP-Plus license on it. Now I need to install a Wireless advanced license, but I got an error when trying. I've read that the wireless license doesn't need the ip-base one but I can't remove it?
View 1 Replies View RelatedI am installing the Demo version of ANM 4.3 on a virtual machine.The install was successful, however when i try to import the demo licence from my laptop to the server it does not allow me to tftp the file to the server.[URL]
View 1 Replies View RelatedWhen installing the license for a 3750-E I get an error that the license doesn't reside on the flash though dir reveals the image in flash. Seen this, know of a resolution?
View 5 Replies View RelatedI'm trying to install a license file on a 3750x stack of 4 switches. I was running IPBase but want to upgrade to IPServices.
Install a License
3750E#copy tftp flash1:
3750E#172.x.x.x
3750E#FDO1111111_201101111111111.lic
3750E# license install flash1: FDO1111111_201101111111111.lic #
I have setup ASA5510 in failover mode. I am planning to use this setup for clientless SSL VPN and have following questions.
1. Do I have to license both firewalls for SSL VPNs? These licenses are very expensive and why would I have to purchase it for secondary when I am not using it?
2. SSL vertificate for the firewall it self. Do I have to acquire one or two to ensure users don't get annoying message about self signed certificate? Cisco doesn't seem to have this discussion in any documents. However I found following URL discussing from somebody's experience. What's official statement from Cisco on this matter? [URL]
I have a WLC 2504 with 5 AP licenses for which I have installed an adder license via GUI. The installation completed successfully, but I still cannot view the new license. The maximum number of APs is still showing as 5 and in fact I cannot add more that 5 APs. I tried installing the license file again, but now I get a "duplicate" error.
View 4 Replies View RelatedWe have a new install of an ASA5510. So far everything is working fine except the VPN.We went through the SSL VPN wizzard in ASDM and answered all questions.Now when we try to open a VPN connection to the ASA using the URL we first get a "There is a problem with this website's security certificate" message.When we click Continue to this website (not recommended) we get a "403-Forbidden: Access is Denied" message indicating that the credentials are invalid. We never even got to the logon screen so we don't even know what credentials it is talking about.
View 10 Replies View RelatedI'm trying to install the anyconnect package on an ASA 5510 running version 9.0.1. I'm getting the following error:
labfwpix(config-webvpn)#anyconnect image disk0:/anyconnect-win-3.1.01065-k9.pkg
copying 'disk0:/anyconnect-win-3.1.01065-k9.pkg' to a temporary ramfs file failed
Is there something that I'm doing wrong when installing the package?Also, is there away to manually install the client on a stand alone PC without a deploying method, similar to the IPSEC client software?
ASA 5510 have two model Bun-K9 and Sec-Bun-K9 from the datasheet find out difference Port related and Redundancy. My questions is : Have any major difference for Security service between two model ?
View 3 Replies View RelatedI am quite new to firewall, in my company one asa 5510 firewall is there.I configured inside, outside, dns, dhcp and nating.I need to config bandwidth limit (1Mbps) for inside port and I restruct like facebook, youtube and pornsites..And I heard that some subscription is required, really is it required?
View 1 Replies View RelatedI purchased the license P/N: ASA-CSC20-250U-1Y with Description: ASA 5500 CSC-SSM-20 250-User License Only Renewal (1-year)
But I had a mistake because I need support to 500 users. Now, to solve my mistake I want to know Do I can purchase another ASA-CSC20-250U-1Y to provide the 500 users suppor?
I mean, ¿are two (2) ASA-CSC20-250U-1Y equivalent to the 500 user license listed below?P/N, ASA-CSC20-500U-1Y with Description: ASA 5500 CSC-SSM-20 500-User License Only Renewal (1-year)
I am able to ping from Switch to firewall inside ip and user desktop ip but unable to ping from user desktop to FW Inside ip.. config is below for both switch and FW Cisco ASA5510....
TechCore-SW#ping 172.22.15.10
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 172.22.15.10, timeout is 2 seconds:
[Code].....
I have two ASA5510's set up in failover, and the secondary keeps crashing after doing the interface checks when bringing failover up. This only happens if I try to upgrade the image on the secondary to anything newer than 8.4.1 (I've tried with 8.4.1-11 and 8.4.2). The primary one run just fine with new images.
I don't have the exact error right now, as I need to do a screen capture from console. It's just a huge crash dump.Are there anything I might have missed during the upgrade? Should I cold-boot both the firewalls in the correct order?
i have a ASA5510 in the office, that already configured 3 context, namely, admin, user, server.in the server context, the last running config was not saved, and there was a power trip last friday night. 1 of the sub interface was affected, and i need to recreate that interface.I am getting the below error, it only allow me to do changes those pre-defined interface.how to I create extra sub interface?
View 3 Replies View RelatedI have a ASA5510 and I have a question about the speed the ports can handle, here is one port:
-interface Ethernet0/2
- speed 100
-shutdown
- no nameif
-no security-level
-no ip address
it's ethernet and not fastethernet so I figure it will only go to 10Mbps, but at the same time I can hard code the speed to 100.
i have cisco ASA 5510 Firewall using in my network, i have planning to upgrade the Flash memory from 256 mb to 512 mb and the RAM from 256 mb to 1GB.
View 1 Replies View RelatedI’m stuck in some problem with installation of LMS4.0 in customer site.
- we purchase a LMS4.0(CWLMS-4.0-100-K9) but couldn’t install it on Windows server 2008 R2 64bit because those things don’t support each other.
- I need to upgrade the LMS4.0 to LMS4.2 that is supporting Windows server 2008 R2 64bit.
- So, I ordered following items via product update tool (url...) [code]
- In this status, how to install LMS4.2 with license for 100 devices? If I install R-PI12-BASE-K9 first, can i enter a licese for 100 devices for CWLMS-4.0-100-K9 into PI1.2?
i have CSC-SSM-20 i want to renew the license to support 750 users for 3 years if i have base license only and if i have base and plus as bundle?i want to know the steps and also the part numbers and what is the difference between these two part numbers
ASA-CSC20-750UP-1YASA 5500 CSC-SSM-20 750-User w/ Plus Lic. Renewal (1-year)
ASA-CSC20-750P-1YASA 5500 CSC-SSM-20 750-User Plus Lic. Only Renewal (1-yr)
Can i buy a plus license for asa 5520??
View 2 Replies View RelatedMy customer is asking to see the license for the SSM-10 card how do i access the card to show this information. the Firewall unit has a base licence installed.
View 2 Replies View RelatedI'm new to ASA and bought a used one from ebay but I cannot connect to the ASDM - I get an error in all the browsers.
Cannot communicate securely with peer: no common encryption algorithm(s).
(Error code: ssl_error_no_cypher_overlap)
Having browsed the support forums and Google - it seems I need the 3DES license. I have obtained an activation key from Cisco and applied it to my ASA 5505 however I get a warning about the device is licensed for a higher software level. the license on the ASA is Security plus. When I apply the activation key from Cisco most of the features are disabled.
[Code] ......