I have a ASA5550 setup with two boxes in HA.I have purchased AnyConnect Essentials for 5000 users for both boxes.The box runs 8.4.2.I tried on one box to enter new activation key and rebooted the box. Still the output of show version is the same !? [code] If I re-enter the key it says same as running key.I then tried downgrade to 8.2.5, same same show version output.
View 6 RepliesI have a base 5505 and would like to get AnyConnect working. To do that, would I have to first purchase either an essentials or premium license and then purchase the AnyConnect Mobile license?
View 1 Replies View RelatedWhat's the difference between VPN Plus license and Security Plus license. I have new 5520 shipped with VPN Plus license.Also does it require a seperate license for Anyconnect for Mobile and AnyConnect Essentials.
View 1 Replies View RelatedI’m stuck in some problem with installation of LMS4.0 in customer site.
- we purchase a LMS4.0(CWLMS-4.0-100-K9) but couldn’t install it on Windows server 2008 R2 64bit because those things don’t support each other.
- I need to upgrade the LMS4.0 to LMS4.2 that is supporting Windows server 2008 R2 64bit.
- So, I ordered following items via product update tool (url...) [code]
- In this status, how to install LMS4.2 with license for 100 devices? If I install R-PI12-BASE-K9 first, can i enter a licese for 100 devices for CWLMS-4.0-100-K9 into PI1.2?
I've inherited an ASA5550 which is missing its SSM-4GE-INC - it was taken out to upgrade a 5540, which is now in production elsewhere in the enterprise. Trouble is, now the 5550 will not boot, it gets stuck after a panic message, and reboots:
Panic: Init Thread - Module SSM-4GE-INC is not present. Rebooting...
I'm taking this as the unit cannot function without this module installed?
we are trying to establish VPN tunnel between ASA5550 and RV042. The tunnel is connected but I cannot access any resources that are behind ASA5550. I can ping the servers but that is about it.
View 1 Replies View RelatedI are currently implementing a new patching schedule (when I say new i mean a company first!!!) and I have identified that the firewalls are all running 8.2(2). I would like to bring these up to the latest version but am a little worried about impact!!! I have setup a test firewall with the config from our live asa's and run the upgrade but have received multiple lines.
View 9 Replies View RelatedIf my ISP brings ethernet into the building via duplex LC multimode fiber can I use the ASA5550 as the first device from the WAN or do I need some type of router for this? I realize I'll need an SFP to get to duplex LC, but I'm not sure if I need a router, or if the ASA can function as a router for this application.
View 3 Replies View RelatedI have upgraded ASA5550 version from 7.2(4) to 8.4(2).
On version 7, I am used to "names" command, like this:
names
name 107.25.1.10 Picard
name 107.25.2.20 Administrativa
By addition, when configuring acls it was very usefull, for example:
access-list inside_access_out line 15 extended permit udp host Picard host 107.25.4.61 eq snmp
On version 8, I have verified that names replacement is no more available:
ASA(config)# access-list outside_access_in permit ip host ?
configure mode commands/options:
A.B.C.D Source host IP address
What are the benefits of consolidation the VPN client users to the ASA 5550? My client currently has the old VPN 3000 series concentrator. Other than it's EOL and EOS, are there any other reasons I can give them?
View 2 Replies View RelatedI am trying to set up an ASA5550 so that I can access the servers behind it. Simple.
As of now, I am unable to even create an access-list to allow traffic from my remote IP into the firewall. As far as my level of experience with Cisco firewalls, it's basically zero but I have taken the Cisco CCNAX class and feel that I have a good understanding of the fundamentals. That said, we only dealt with routers and switches, and it's not impossible that I'm missing something that would be totally obvious to most folks on this board. I've used CLI and ASDM with no success.
Here are the relevant parts of the config:
[code]...
I have been getting overrun errors on 3 different ASA 5550 HA pairs with traffic rates less than 100Mbps total. I was told by one TAC guy to split the traffic between the two slots so that traffic comes in one and exits the other to maximize throughput because the 5550 was designed to work that way. Another TAC guy told me to enable ethernet flow control to alleviate the overrun errors because the traffic was bursty, but this doesn't seem to address the root cause of the problem to either. TCP traffic is bursty by nature and has it own flow control mechanism. I can't seem to find any detailed info on why traffic needs to be split for 100Mbps when the marketting throughput number is 1.2G. Is this a design flaw or limitation? Is there a way to alleviate overrun errors?
View 25 Replies View RelatedI need to block 4000 nodes (Ultrasurf, TOR exit nodes) and I've written a script that will ssh and copy in these objects (prob 100 at a time) into an object group and then put a blanket deny. I don't see a flood of traffic (occassional hits every other day, etc) but I was wondering what the impact would be? Can the ASA handle an object group of that size plus an ACL with it? Any way to block incoming connections from TOR/Ultrasurf?
View 1 Replies View RelatedI want to run two syslogs, one to Loglogic for compliance and the other to Solarwinds for network administration. Currently the firewall is setup for just the one syslog device. If I add an additional device ie further IP in the config for the Loglogic box will there be any noticeable differences in the performance of the firewall, does affect the cpu utilisation, or memory in any way.
View 1 Replies View Relatedgetting step by step procedure to bring an ASA5550 to factory default setting, so that I can configure it from scratch via ASDM
View 3 Replies View RelatedIs it possible to establish PBR rules that set the ip next-hop to point directly to the inside interface of the ASA5550?Or, do I need to direct this PBR traffic first to a directly connected router interface and then default route to the ASA?At a high level, here's what we have:
ISP 1 - with /21 IP PrefixNo BGP Routing3845 Edge Router - Default Route to ISP 1PIX535 Firewalls (HA) - Default Route to Edge RouterLAN Core/Distribution - Default Route to PIX535 Inside InterfaceAll applications/services use this egress path for PAT/NAT/DMZ/VPN/Etc.
Here's what we are adding:
ISP 2 - with /24 IP PrefixNo BGP Routing3925E Edge Router - Default Route to ISP 2ASA5550 Firewalls (HA) - Default Route to Edge RouterSame connectivity to LAN Core/Distribution
Goals:Maintain ISP 1 for nowMigrate only end user Internet traffic to ISP 2No disruptions to applications/services using current DefGW to PIX535
Question: how to best use PBR to selectively direct traffic to the ASA inside interface?
How to schedule automatic Xlate sessions cleaning in ASA5550. I want to clear few global nat sessions manually every week.Is there any way to automate that?
View 1 Replies View RelatedWe have currently install single ASA 5550 and want to install one more ASA for active standby mode, but cisco discontinue or End of sale ASA 5550. can any one guide me ASA 5555X is compatible with ASA5550 on active standby mode or not.
View 2 Replies View RelatedI have the latest ASDM 7.1(2) & ASA5550 9.0(2). When I try to start Remote Access VPN Wizard, it's just nothing to select in Wizards-VPN Wizards, except "Site-toSite VPN Wizard..."
View 2 Replies View RelatedI currently have a Cisco ACS 3415 appliance with 5.4. Coming from the ACS 4.2 world, I'm have a bit of a struggle creating the following and I was hoping if I could be shown clear steps I can duplicate the rest.
I want to creat a group ie: AIRTEMP with access time from 7:00am to 5:00pm and add 2 users to the group.
Users access our site using a vpn client connecting to a ASA5550. The ASA and the ACS already communicate with each other.
The ACS 5.4 user guide has me bouncing all over different page.
We are looking to implement traffic shaping/policing primarily for P2P traffic. As natively the ASA5550 is only capable of p2p inspection if the traffic is tunneled via port 80 is the AIP-SSM the way forward? We have 2 5550s in active/active failover config. As a side note we are also looking to implement an IDS/IPS system so could this module cover all?Is this module going to provide the desired outcome or is there another module/device out there better suited for this? I would prefer to use the ASA5550s as opposed to implementing another product if only that we can make use of the investment we already made on these devices.
View 1 Replies View RelatedI have a new ACS 5.3 configure and a ASA5550 to authenticate VPN users using a remote LDAP server. Once I try to authenticate the users with the ACS it gives me the error message "22056 Subject not found in the applicable identity store(s)."
I checked out the documentation and have already configure the Identity store sequences to redirect everything to the LDAP server, I also did the Bind test and it says that is ok, but I still have the same problem.
I validated the Access Policies Menu, and tried to create a new Service Selection Rules, but whet I get to the option of modifying the Identity option I get the error: "This System Failure occurred: {0}. Your changes have not been saved.Click OK to return to the list page. " and I'm not able to modify the identity, not in this new option I created, nor in the ones already created in the ACS.
I would like to know if it is possible to purchase a Cisco Prime LMS 4.2 licence but use it to download and run LMS4.0. The reason for asking is we wish to run Windows Server 2003 not 2008 and LMS 4.0 is end of sale already so we can't purchase any version that will run on 2003.
View 4 Replies View RelatedIs it possible to get a PAK back from a license? For example, if the PAK is joined with the wrong serial number is there a way to revert the binding of the PAK and serial to get just the PAK again?
View 5 Replies View Relatedi have loaded a temporary 4 weeks license on a Cisco 887 router running 15 software.The license appears under temporary licenses, but the enable license is grayed out, so the sslvpn configuration section is unavailable.
View 1 Replies View RelatedCan I bind SSL license key from 1 ASA to another , we recently got 5540 and i want to use my SSL 5510 license on the new firewall
View 1 Replies View RelatedI purchased Product # FL-WEBVPN-10-K9=
What i got was a price of paper paying gratitude for purchasing a license and a CDROM with a video on Electrostatic discharge and copies of the user agreement in several languages. How do i actually activate and use this license? The router is already setup for the SSL vpn. It just doesn't connect. I am assuming it is because i have no license installed?
I have cisco asa 5505 Base Line .. so i want to buy the license key to get more features . so what is the requirments and how i can buy .
View 1 Replies View RelatedWe have LMS 4.0.1 with 300 devices license and we want to upgrade it to 4.1, pls. let me now if it's free or any cost is assocated with it.Earlier when we directly installed LMS 4.0 license on 4.1, it was not accepting.
View 1 Replies View RelatedThe license has been installed onto the router. Here is the relevant out from the show license all:
License Store: Primary License StorageStoreIndex: 0 Feature: ipbasek9 Version: 1.0 License Type: Permanent License State: Active, In Use License Count: Non-Counted License Priority: MediumStoreIndex: 1 Feature: WAAS_Express Version: 1.0 License Type: Permanent License State: Active, Not in Use License Count: Non-Counted License Priority: Medium
WAAS license as it says that this is not in use, WAAS under the interface is not possible.
If i require ACS 5.3 in HA. Do i need to procure two ACS with the add-on licenses?
View 1 Replies View Relatedi have two asa runnig 8.4 configured as Active/Standby Now i received a new Anyconnect license, how do i install the new license?Install the activation key on the Active and Standby unit.Install the activation key on the Active unit only.
View 1 Replies View RelatedI want to configure IOS SSL VPN on C1941 Router. let me know if any additional License is required for that.
View 1 Replies View Related