Cisco :: Unable To Install Prime 4.2.1
Jul 1, 2012i´m trying to install Cisco Prime 4.2.1 but i´m getting following error.
View 1 Repliesi´m trying to install Cisco Prime 4.2.1 but i´m getting following error.
View 1 Repliesif i have a LMS server the newest version, and i bout Nexus 7K with its DCNM ver 5.2 (DCNM-N7K-K9) can i install the (DCNM-N7K-K9) license on the Cisco Prime LMS 4.1 Base so that i can manage Nexus through LMS?if this works Can I manage all Nexus switches also?
View 5 Replies View RelatedCan i install Cisco prime infrastructure 1.3 with 1.1 license.To be more precise it will be fresh installation but the licenses I have is of 1.1.As per my overview from Cisco prime Infrastructure 1.2 NCS and NCS(WAN) has been bundled into one service.But both were separate entities in Cisco Prime Infrastructure 1.1.
View 7 Replies View RelatedI am going to install two new Cisco Prime LMS 4.1 servers application in a Master and Slave Deployment, and how many bandwidth is consumed between the servers.
View 1 Replies View RelatedIm having trouble with the topology service. Java is installed, but i cant start the topology service.
View 7 Replies View RelatedI'm trying to do configuration archiving in Prime Infrastructure 1.2 with a 5508 WLC (7.4).The job always fails (Admin -> Background Jobs) with the following error (see attachement):"SNMP: Failed to establish SNMP connection xxxx - Cause: Device is Unreachable. Check the ReadOnly community string." I double checked the SNMP credentials, they do match. For testing I also added a Public community just for the PI. Same result.Am I missing something?Is this not intended for Wireless Controllers?
View 5 Replies View RelatedI have an old DOS box running MS workgroup add-on 3.11. This has been running for years with no issues until I recently installed a new Win 2008 server which does not support Netbeui. I am trying to install TCP/IP but have had no luck finding the 16 bit version of tcp. I can succesfully add the 32 bit stack, but the nic doesn't like it. Has any ever run into this problem before?
View 3 Replies View RelatedI'm currently running CiscoWorks LMS 4.0.1 on Windows 2003 under VMware and just got upgrade licensing for Prime Infrastructure 1.2. I am assuming that I will need to upgrade the current server to Prime LMS 4.2 in order to ensure that data migration to Prime Infrastructure goes well. I am planning to follow Cisco's recommendation to run Prime LMS and Prime Infrastructure in parallel for a time and migrate individual functions.
My real question is about Syslog handling. All of the managed devices are currently sending Syslog data to LMS. As a last step in the migration, is it possible to change the IP address of the Prime Infrastructure server to replace the Prime LMS server so that the Prime Infrastructure server will just start getting all the Syslog data, or do I need to go change hundreds of managed devices to point to a new address?
What is the relation between: cisco NCScisco Prime LMSCisco Prime infrastructure.As i orderd a Cisco Prime infrastructure from a Cisco Partner and what i got is :
x2 cisco NCS appliances
x1 DVD cisco prime infrastructure
x1 DVD Cisco prime 4.2
I am using a Cisco 3925 router and attempting to install an EHWIC card with no luck. The card I am trying to install is EHWIC-D-8ESG.
I have powered down the router, inserted the card into the proper slot and my router doesn't seem to recognize the new card. Is there a command I need to enter to enable the card?
At one time this D-link adapter was installed on this same computer but somehow the drivers got deleted.I am trying to reinstall. The computer is running Windows XP Professional. I downloaded the driver from Dlink's web site and unzipped the files on the computer.The Ethernet Controller shows up in Device Manager with the yellow ? so I right click it and the click on Update Drivers. But when I tell it to install the drivers a window comes up saying it cannot install because it cannot find the necessary software.
View 14 Replies View RelatedMy computer was playing up so I reinstalled windows. Only problem is the disk that has the drivers for the Ethernet doesn't show it so i can install. I went into the disk and tried to manually reinstall but it just installed and didn't work. I can't see the network adapter under the device manager it's like it's gone. It's a custom built system on xp.
View 1 Replies View RelatedI can not install any programs because of poor connectivity. Every time I attempt to install a program; steam, chrome, yahoo messenger, I get a message that says I'm not connected to the internet. How can I fix this iisue?
View 3 Replies View Relatedi am experiencing some sort of issue with my Ethernet Controller. About an hour ago i had run a diagnostic report, (using my Norton 360 security program) while i scrolled down the report i came across an orange attention bubble that read "Inoperable Hardware Devices" then a chart lists hardware devices that aren't working, it looked like this:
Data Type Device Problem/ Description
-Device Type -Ethernet Controller
- Device Status -Device Drivers are not installed
(Code 28).
i tried to update the device but it doesn't work, it says that "windows was unable to install Ethernet Controller, ...Windows could not find driver software for your device"
I've spent several hours trying to see if it's even worth trying to upgrade my old Thinkpad i1400, which has Windows 98 and only a modem internet connection. Obviously in today's world it's wireless or nothing. So...I've read that I could upgrade to Windows 98SE, and on [url]... the used disk is only about $15. I also read that 98SE has a lot of glitches. However, I already have an XP disk (don't know how I got it) but it may be corrupted, because it never finishes the installation on the thinkpad---goes completely blank after about 10 minutes. One problem is the limited hard disk space on the i1400 --- about 2.5 GB for both the C and D drives respectively. There is less than 1 GB on the C drive free and XP takes up almost 800 MB. I'm afraid to wipe clean Win98 and replace it with XP, and for some reason I can't install XP to the D drive. Even if I could accomplish this, will XP be the magic bullet that gets me wireless on this dinosaur of a laptop?
View 2 Replies View RelatedI am installing the Demo version of ANM 4.3 on a virtual machine.The install was successful, however when i try to import the demo licence from my laptop to the server it does not allow me to tftp the file to the server.[URL]
View 1 Replies View RelatedI recently installed a fresh Win7 Ultimate on my PC. I have done this many times, but nothing like this has happened.I have a problem connecting to the internet from my laptop. This is a screenshot of my Device ManagerThe diagnostic tools and built-in problem solving tools do nothing, as usual.
View 1 Replies View RelatedI installed Windows 8 (Build 9200)on Dell Inspiron 1545, Service Tag No -<ADMIN NOTE: Service tag removed per privacy policy>. Peviously it was working in Windows 7 & Vista
View 4 Replies View RelatedI am using Inspiron N5010 with service tag : <ADMIN NOTE: Service tag removed per privacy policy>
I earlier had windows 7 in which my laptop's bluetooth was working fine. Then i installed windows 8 release preview and even in that bluetooth was working fine. yesterday i installed windows 8 pro with WMC in it and since then the bluetooth isn't working.
My wifi is working fine.
1. I even checked in the BIOS....internal bluetooth is enabled.
2. I tired to install the driver by downloading it fromURL
3. I even tried to this method
Access device manager
- Click ‘Start’, and then click ‘Control Panel’
- Click ‘Hardware and Sound’
- Click ‘Device Manager’
- ‘User Account Control’ dialog box appears.
- Click ‘Continue’
- Device Manager Page opens up.
- Locate a category called ‘Bluetooth Radios’
- If not found, locate ‘Network Adapter’
- Also observe if it has a yellow mark besides any of the device listed
- Browse through the whole list to check for any other item listed with a yellow mark
- Capture the item with the yellow mark
4. I even tried this method
- Click the following link to download the most updated driver for the Bluetooth: [URL]
- Save the folder (zipped folder) on the 'Desktop screen'
- Double-click the new icon on the desktop labeled R241623.exe
- The Self-Extracting window appears and prompts you to extract or unzip to C:DELLDRIVERS
- Click Ok
- After completing the file extraction, if the Self-Extractor window is still open, close it
- Open the following path: C:dellDrivers31N70Win64 (Follow steps mentioned below)
- Click 'Computer' and drive letter 'C'
- Locate folder 'dell' and double click it
- Locate folder 'Drivers' and double click it
- Locate folder '31N70'
- Locate folder 'Win64' and double click it
- Locate file Inst (Refer to the image below)
- Right click file 'Inst'- Click 'Run as an administrator'
- Click 'Yes' to continue if prompted with 'User access control' message
- Follow through with the installation as per the screen instructions
- Finish the installation and check for the Bluetooth functionality
- If issue persists, try using the 'setup' file to install drivers in compatibility mode (Next Step)
Install 'Setup.exe' file in 'compatibility Mode'
- Navigate to C:dellDrivers31N70Win64
- Right click ‘Setup’ file and click ‘Properties’
- Click “Install in compatibility mode’
- Click on Application and select ‘Troubleshoot Compatibility’
- Next, click on ‘Troubleshoot Program’
- Click on Program worked in earlier versions of Windows
- Click on ‘Windows 7’
- Click on ‘Start the Program’
- Do not hit ‘Next’ until the installation completes
- Once the installation completes, click on ‘Next
We use RVL 200 to establish VPN connections. Now we have the problem that no VPN connection is established.
The same problem with Windows 7, but also with Vista Buiness, using administrator account, IE8, trusted sites, ActiveX enabled ...Message: Virtual Passage Setup:Error: Virtual Passage not installed. Please install as administrator.
i am unable to install drivers for dell mini 1018 laptop. relatek lan which i have specified.
View 1 Replies View Related1. Printer:HP Officejet 6600
2. OS: Windows 7
3. Error: Cannot find printer on wireless network *name*
4. What did I do? Just installed the printer software from HP website.
I got the HP Officejet 6600 and successfully connected it to the network at home. I managed to connect the home desktop (Windows 7), a laptop (Windows 7) and a Macbook Pro. These are all the personal ones.However, when I tried to install the the HP Officejet 6600 on the work laptop, the installation wasn't able to find the printer on the home network when doing it wirelessly. I managed to install it the USB cable but that was about it.Also, when trying to install it wirelessly, it found our home network, couldn't find the printer so it prompted me to type in the IP address for the printer, which I did, however, it still wasn't able to find it. The work laptop is connected to the home wireless in the network connections and the American Express server.Is there a way to get around this issue so I can connect the laptop to the printer wirelessly as it would make life a LOT easier.
Whenever I try to install the drivers for the adapter normally, Windows 7x64 gives me a message that the device name "Compact Wireless-G USB Network Adapter" already exists and is in use, preventing me from installing the wireless driver properly. In order to get around it, I changed all "Compact Wireless-G USB Network Adapter" fields into "Compact Wireless-G USB Network Adapter B" in the netr28ux.inf file to make the driver install under a different name.I tried everything I can to remove all evidence of linksys drivers from my computer, uninstalling and removing driverstore with pnputil.exe, but I cannot seem to find the originating files to uninstall.For now the way I edited the netr28ux.inf file works, but I'd rather be able to install the driver as intended.
View 6 Replies View RelatedI purchased the AE1000 wireless adapter for use with my Linksys WRT54G router. I first tried to install by loading the CD, which went so far as the "Insert your adapter into a USB port" screen. The Windows "processing" circle spun for about twenty minutes, then I was prompted to "insert the wireless adapter" once more. Rinse, repeat. I absolutely cannot get past this step. I scoured the web for an answer and turned up little. I uninstalled my antivirus and firewall software, made certain that files associated with my prior adapter were removed, tried varying USB ports (all 2.0) on my desktop, and had no success. Today, I exchanged the adapter for a replacement, and I'm encountering all of the same difficulties.
View 6 Replies View RelatedI have a dell studio 1555 and i im not able to install bluetooth setup.While installing bluetooth setup a message will be shown by saying "switch on the wireless" but in my laptop there is no switch of wifi near hdmi port.
View 1 Replies View RelatedI just installed Windows 7 on my M1530, and everything works flawlessly...EXCEPT bluetooth. I downloaded the drivers from the dell website (for vista 32bit), but when I try to install it says "Press Fn+F2 or turn on the wireless switch". The wireless switch is already on, and I press Fn+F2, but to no avail. It worked fine on Vista Home Premium 32bit. I tried running the install file in compatibility mode too, to no avail. how to make it work?
View 22 Replies View RelatedJust purchased the E4500 today and install failed on both machines. Install starts and then fails to finish.I have contacted support via chat and was given manual instructions and the router will not connect to either machine.Are there known issues with the Cisco Connect software not installing?
The chat support person finally dropped out of the chat and the router remains in an unusable state.I currently had to cable wired connection of laptop to get an internet connection.
I have Dell laptop N5050 model and installed Windows xp but wireless lan and graphics drivers are not able to install on XP. Which compatible drivers should work on this laptop mode
View 2 Replies View RelatedI have a LAN device (an SBS radar decoder). It is configurable with its own IP etc etc.I am not able to install this device where my router (a Speedport W 920V) currently is.So, can I use any of the above devices, perhaps as a bridge on my current wlan network, to allow me to plug in this LAN device so I can access it anywhere in my house on the wlan?
View 1 Replies View RelatedCannot get my Intel WiFi Link 5300 wireless card to install properly on my my Latitude 6500 using XP SP3. I can go to the Intel website and download the latest driver but once everything has been downloaded and ran, then restarted the wireless icon says that my driver is not installed.
View 13 Replies View RelatedI recently installed LMS 4.2 appliance and I noticed that the web administration page was really slow. I checked the CPU utilization in VMware and it was at 55%.
View 1 Replies View RelatedI am using Prime LMS 4.2.2 software to archive configuration for my cisco Network Device switch and firewall . All works fine except for two new Cisco ASA 5525 and ASA 5545 ( Software Version 8.6.1.2 ) . I have already checked credential , ssh access , snmp configuration and all seem correct. But Archive configuration job end with failure. This is the error message:
View 1 Replies View RelatedMy customer is using Cisco Works LMS 4.0 ( Product # : CWLMS-4.0-300-K9 ) and we they are willing to upgrade it to Cisco Prime LMS 4.2 (or latest version). as well as adding additional device licenses to become 750
View 1 Replies View Related