Cisco :: Upgrade LMS 4.0 To Prime LMS 4.2

Apr 22, 2012

My customer is using Cisco Works LMS 4.0 ( Product # :  CWLMS-4.0-300-K9 ) and we they are willing to upgrade it to Cisco Prime LMS  4.2 (or latest version). as well as adding additional device licenses to become 750

View 1 Replies


ADVERTISEMENT

Cisco :: Prime Upgrade 4.0 To 4.1?

Feb 1, 2012

have bought license for LMS 4.0. I want to upgrade to 4.1. Should i buy any additional PAK for the license upgrade?

View 1 Replies View Related

Cisco :: LMS 4.0 Upgrade To LMS 4.2 (Prime)?

Mar 11, 2013

Is it better to uninstall LMS 4.0 completely and then install LMS 4.2 or could I do a direct upgrade?. I've heard the db tables etc. have changed a lot and might cause problems for a direct upgrade.

View 5 Replies View Related

Cisco :: To Upgrade NCS 1.1.0.58 Prime Infrastructure To 1.3

Feb 20, 2013

I´m about to upgrade a customers appliance box to PI 1.3. I am guessing an upgrade to 1.2 would be almost the same, license wise.

View 10 Replies View Related

Cisco :: Upgrade From WCS 7.0 To Prime Infrastructure 1.2

Jan 12, 2013

I need to know how to do the upgrade from WCS 7.0 to Prime Infrastructure 1.2.
 
I was reading and i need to upgrade to the NCS 1.1 before to go to prime infrastructure 1.2.
 
I will need license to NCS 1.1 before upgrade to infraesctructure 1.2 ?
 
Will i have some problem with this upgrade ? correct process for not have any problem with this upgrade ?

View 4 Replies View Related

Cisco :: LMS Upgrade From 4.1 To Prime Infra 1.2

Dec 25, 2012

we have Cisco LMS 4.1 with 300 device license. we need to upgrade to Cisco Prime infrastructure 1.2 if we can do that with smartnet contract, what is the smartnet to get this update ?

View 5 Replies View Related

Cisco :: Restoring Backup After Prime V4.1 To V4.2 Upgrade

May 18, 2012

I'm trying to restore backup after upgrading Cisco Prime v4.1 to v4.2. However, getting the following error in the log. [code] The log shows the error is a continuous one and affraid it may be a loop. Currently my restore progress is stuck at 70%RME restoration.[code]

View 2 Replies View Related

Cisco :: Login After Upgrade From NCS 1.1 To Prime Infrastructure

Nov 17, 2012

I have upgraded NCS 1.1.1.24 to PI 1.2 lately. The installation process completed successfully.But now i am not able to log in to the GUI anymore as root. After entering the password all I get is a blank site (undefined).I get the same result with all known browsers. Rebooting or restarting NCS does not change anything.

View 12 Replies View Related

Cisco :: NCS Upgrade V 1.1.1 To Prime Infrastructure V 1.2 Not Working

Nov 18, 2012

after an upgrade of NCS 1.1.1.24 to CPI 1.2 on green field, it was not possible to reuse the GUI.  During the upgrade, I''ve shortly seen an oracle DB error, but the upgrade was going through, without problems.At the end, it was not possible to use the GUI, and every trial to start the services was stopped with errors.I've found the following severe Bug ID's in the support forum: Bug CSCuc29378 Prime Infrastructure 1.2 won't start after a db restore/Upgrade from NCS1.1.1.24 Oracle DB bug as well: CSCtw59460.I see only a new installation from scratch (1.2) as solution, but the bug is not resolved in V1.2, as seen in the bug tool.
 
- As the customer has an v.1.0 license who worked with NCS 1.1.1, do I need an upgrade order to be able to activate an installation from the v 1.2 ova (new PAK)??
 
- I'm searching for a one year CPI partner license, because I heard about in some Cisco Live sessions, but I did not find a way to acces´s to it.

View 2 Replies View Related

Cisco :: LMS 4.1 (Windows) / NCS 1.1 (VM) Upgrade To Prime Infrastructure?

Jan 23, 2013

Im getting a bit confused about the whole upgrade migration process for the following config to Cisco Prime Infrastructure:
 
LMS - Version 4.1 , 500 devices. Windows Server 2008 R2 Standard SP1
NCS – version 1.1 , 50 devices  Red Hat Linux ( 64 Bit)  (Installation software - NCS-VA-1.0.1.4-small.ova)
       
I want to be able to backup databases and migrate licensing from LMS and NCS to one platform.

View 1 Replies View Related

Cisco :: LMS 4.1 - Upgrade To Prime Infrastructure / Migrate WCS To NCS?

Apr 2, 2012

I have a client who has LMS 4.1 with SAS support, I know that I can upgrade him to the Prime infrastructure for LMS and NCS, however he is licensed for 100 devices. He also has WCS 7.0 with 50 AP licenses, I want to upgrade his LMS to Prime infrastructure and then migrate his WCS to NCS, but how do I know combine the both so that he is on one platform.

View 1 Replies View Related

Cisco :: R-PI-1.1-500-K9 How To Upgrade To Latest Version Of Prime Infrastructure

Apr 9, 2013

We just purchased the following items:
 
(1) R-PI-1.1-500-K9
(2) PRIME-NCS-APL-K9
 
 I want to know how I can upgrade to the latest version of Cisco Prime Infrastructure.

View 1 Replies View Related

Cisco :: Migrate From Prime LMS 4.0.1 To Prime Infrastructure

May 9, 2013

I'm currently running CiscoWorks LMS 4.0.1 on Windows 2003 under VMware and just got upgrade licensing for Prime Infrastructure 1.2.  I am assuming that I will need to upgrade the current server to Prime LMS 4.2 in order to ensure that data migration to Prime Infrastructure goes well.  I am planning to follow Cisco's recommendation to run Prime LMS and Prime Infrastructure in parallel for a time and migrate individual functions.
 
My real question is about Syslog handling.  All of the managed devices are currently sending Syslog data to LMS.  As a last step in the migration, is it possible to change the IP address of the Prime Infrastructure server to replace the Prime LMS server so that the Prime Infrastructure server will just start getting all the Syslog data, or do I need to go change hundreds of managed devices to point to a new address?

View 2 Replies View Related

Cisco :: Link Between NCS / Prime LMS And Prime Infrastructure 4.2

Mar 12, 2013

What is the relation between: cisco NCScisco Prime LMSCisco Prime infrastructure.As i orderd a Cisco Prime infrastructure from a Cisco Partner and what i got is :
 
x2  cisco NCS appliances
x1  DVD cisco prime infrastructure
x1  DVD Cisco prime 4.2

View 4 Replies View Related

Cisco Wireless :: 1242 - Cannot Upgrade AP To LWAP Using Upgrade Tool On Windows 7

Sep 29, 2011

I have two Windows 7 computers and neither one will successfully upgrade a 1242 AP to LWAP.  However, I go to a coworker's XP machine and run the tool without issues.  On Windows 7 I keep receiving the error message of ACL or Firewall is blocking.  I have added rules and then even tried disabling the firewalls completely on both computers and still no success. 

View 7 Replies View Related

Cisco Wireless :: 5500 AP Upgrade Lic Upgrade On Controller

Jun 19, 2012

I am facing a problem to install a ap upgrade lic file on controller 5500. Iam getting the following error:

% Error: License file transfer failed - Error from server: File not found
 
I have confusion here that when I configure this command from GUI

tftp://172.32.45.22/cmm/standard.lic
 
What i should use for /cmm/  ????
 
Let say i have lic. file is on desktop of tftp server computer and I say in this command
 
tftp://10.12.70.35/??/license file .lic

View 6 Replies View Related

Cisco :: Prime LMS 4.2 Using 55 % Of CPU

Jun 12, 2012

I recently installed LMS 4.2 appliance and I noticed that the web administration page was really slow. I checked the CPU utilization in VMware and it was at 55%.

View 1 Replies View Related

AAA/Identity/Nac :: CSACS-1121-UP-K9 - Possible To Upgrade It Being Non Upgrade Part

Sep 10, 2012

Is it possible to upgrade the CSACS-1121-UP-K9 to be a non upgrade part? We were going to upgrade from a Windows 4.x to the above Appliance (version 5.x) but there is now a reason to keep the old Windows version running therefore we cannot give the new Appliance the old ACS's licenses?!So we should have (with hindsight) bought a fresh version of the ACS 5.x rather than an upgrade.

View 1 Replies View Related

Cisco :: Prime LMS 4.2.2 Configuration

Nov 28, 2012

I am using Prime LMS 4.2.2 software to archive configuration for my cisco Network Device  switch and firewall . All works fine   except for  two new Cisco ASA 5525 and ASA 5545 ( Software Version 8.6.1.2 ) . I have already checked credential , ssh access , snmp configuration and all seem correct.   But Archive configuration job end with failure. This is the error message:

View 1 Replies View Related

Cisco :: Will LMS Prime 4.1 Be Getting A Map Module

Oct 31, 2011

Will Cisco LMS Prime 4.1 be getting a map module, so you are able to see a graphical map of up and down status of devices? I know the topology map is a module within LMS, but what would be nice to see is a graphical map, where you are able to manipulate the icons to place them on that status map.

View 2 Replies View Related

Cisco Wireless :: Cannot Add MSE 7.4 VM To Prime 1.3.20

May 19, 2013

How do I add the MSE 7.4 VM to Prime 1.3.20?
 
The Prime uses https or http when trying to add the MSE. But those ports are closed on the MSE. The MSE seems to expect traffic on tcp 8001.
 
We did not change the default NCS-username/password in the startup-wizard.
 
C:WindowsSystem32>nmap 192.168.0.211
22/tcp   open  ssh1099/tcp open  rmiregistry1521/tcp open  oracle8001/tcp open  vcom-tunnel9001/tcp open  tor-orport9002/tcp open  dynamid

[Code]......

View 5 Replies View Related

Cisco :: Integrating ACS 4.2 With Prime LMS 4.1?

Jan 4, 2012

I am trying to populate the LMS 4.1 components to ACS. 

View 2 Replies View Related

Cisco :: Upgrading NCS 1.1.1.24 To Prime 1.3

Mar 13, 2013

I am currently running NCS 1.1.1.24 and trying to upgrade to prime 1.3, but running into some issues, i applied the patch ncs_patch-1.1.1.24-upgrade-12.tar.gz, but when i try to acutally upgrade i get the following...
 
admin# application upgrade PI-upgrade-bundle-1.3.0.20.tar.gz defaultRepo
Save the current ADE-OS running configuration? (yes/no) [yes] ?
Generating configuration...
Saved the ADE-OS running configuration to startup successfully (code)

View 1 Replies View Related

Cisco :: Migrate From WCS 7.0.172.0 To Prime NCS

Mar 12, 2012

Is there anyway to migrate off of WCS to Prime NCS? We have a fully built WCS system with maps and all configs and was wondering if there was a way to restore to NCS.

View 1 Replies View Related

Cisco :: Migrating From NCS 1.1.2 To Prime 1.2?

May 8, 2013

[URL] it mentions that migrating from NCS 1.1.2 to CPI 1.2 isn't possible.
 
How can I get around this?

View 3 Replies View Related

Cisco :: LMS 3.0 To Prime 1.1/ LMS 4.2 Migration?

Nov 28, 2012

A customer is asking to upgrade their LMS 3.0 to Prime 1.1.  However, the customer or their previous system's integrator never actually installed LMS 3.0.  The licensing and PAK were never used as well.  My question is, can I still use the migration top level part # R-PI-1.1-UP-K9 to upgrade LMS 3.0 to Prime 1.1 because there was no licensing ever installed?  How would the migration of the current licensing work with the new licensing PAK if that is the case?  Or does the customer have to purchase a fresh Prime 1.1 licensing (top level part # R-PI-1.1-K9) because LMS 3.0 was never installed?

View 2 Replies View Related

Cisco :: Update To Prime LMS 4.2.3?

Feb 5, 2013

After update to LMS 4.2.3 is get always a message to confirm when login:
 
"Server is capable for performance tuning. Please enable PTT ...."           
 
Even when i setup PTT the message will come again next time i login.The message comes also several times after login.where to disable this message?

View 2 Replies View Related

Cisco :: WCS 7.0.240.0 Data Export To Prime 1.2.1.012?

Apr 18, 2013

I'm trying to migrate old data from WCS 7.0 to Prime 1.2 ... I have already created the zip file from WCS and imported it into the defaultRepo on Prime.  I see it in the directory when I do a show repository defaultRepo so I have confirmed that it is there.  My issue is that it appears Prime 1.2.1.012 won't accept the cli command of ncs migrate. 
 
how I can proceed with the migration?  I haven't been able to find any similar command in the Prime CLI so at this point I'm lost as to where I should go from here.  I really don't want to have to tell the customer they have to downgrade to Prime 1.1 in order for them to perserve their maps especially since the Deployment Guide for Prime Infrastructure states that it is possible to migrate date from WCS 7.0 to Prime 1.2 as shown below ...
 
Data Migration
#
Data can be migrated from WCS 7.0, NCS 1.1, or LMS 4.x. More details on migrating data from each of these applications are spelled out in the following sections.

[Code].....

View 10 Replies View Related

Cisco :: How To Kick Off A User In Prime 4.2

Mar 4, 2013

possible in Cisco Prime 4.2, to kick off a particular user? in GUI or CLI ?

View 0 Replies View Related

Cisco :: LMS / Prime 4.1 - No Discovery Of WS-X4712-SFP+E

Dec 4, 2011

my customer is using Cisco Prime 4.1 as an Upgrade from LMS 4.0 and has made a discovery of a new added Cat 4506E with a Sup 7E and Modules.All the devices have been discovered, excepted the module WS-X4712-SFP+E.Is this card not supported yet ?I could not find any detailled and actual information about the support or not of this module, or about the conditions for the Module support it in Prime 4.1..How ist it possible to proceed to having this module discovered ?

View 1 Replies View Related

Cisco :: Prime LMS 4.1 SMTP Settings

Jul 16, 2012

We have installed the Cisco Prime LMS 4.1 in our production environment. We have configured SMTP settings, but unable to find where we can configure username and password for SMTP authentication. It's only giving a option to enter email address without any authentication parameters.

View 2 Replies View Related

Cisco :: Prime LMS 4.2.2 Setup Error

Aug 28, 2012

When I run installation process I have received unexpected error:I have windows 2008 R2 x64. Antivirus is disabled and I have administrator privilege.

View 6 Replies View Related

Cisco :: WCS 7.0 To Prime Infrastructure 1.2 Migration?

Apr 9, 2013

WCS 7.0 to Prime Infrastructure 1.2 migration?I am so confused on the migration procedure as I found the documents in Cisco kind of contradictory.Some document said it is required to upgrade WCS to NCS 1.1 before to go to prime infrastructure 1.2.And the other document said WCS can directly upgrade to prime infrastructure 1.2.

View 13 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved