Cisco :: Migrate From WCS 7.0.172.0 To Prime NCS
Mar 12, 2012Is there anyway to migrate off of WCS to Prime NCS? We have a fully built WCS system with maps and all configs and was wondering if there was a way to restore to NCS.
View 1 Replies
ADVERTISEMENT
Cisco :: Migrate From Prime LMS 4.0.1 To Prime Infrastructure
May 9, 2013I'm currently running CiscoWorks LMS 4.0.1 on Windows 2003 under VMware and just got upgrade licensing for Prime Infrastructure 1.2. I am assuming that I will need to upgrade the current server to Prime LMS 4.2 in order to ensure that data migration to Prime Infrastructure goes well. I am planning to follow Cisco's recommendation to run Prime LMS and Prime Infrastructure in parallel for a time and migrate individual functions.
My real question is about Syslog handling. All of the managed devices are currently sending Syslog data to LMS. As a last step in the migration, is it possible to change the IP address of the Prime Infrastructure server to replace the Prime LMS server so that the Prime Infrastructure server will just start getting all the Syslog data, or do I need to go change hundreds of managed devices to point to a new address?
Cisco :: Migrate From WCS 7.0 To Prime Infrastructure 1.2
May 28, 2013I am looking for the licensing and upgrade path for going from WCS 7.0 to PI 1.2.At present I have a WCS licensed for 200 APs which is managing one controller and 150 APs.I intend to use the Cisco Prime Upgrade Promotion to order R-W-PI12-M-K9 (WCS 7.0 to Cisco Prime Infrastructure 1.2 Migration) and L-W-PI12-100-M and L-W-PI12-100-M to match the number of licenses on the WCS.
Once Prime is installed I also want to manage another 50 devices, does that mean I have to purchase the Cisco PI 1.2 Base License and Software (R-PI12-Base-K9) and another 50 Lifecycle licenses, or will my existing 200 licenses from the upgrade suffice.
Cisco :: LMS 4.1 - Upgrade To Prime Infrastructure / Migrate WCS To NCS?
Apr 2, 2012I have a client who has LMS 4.1 with SAS support, I know that I can upgrade him to the Prime infrastructure for LMS and NCS, however he is licensed for 100 devices. He also has WCS 7.0 with 50 AP licenses, I want to upgrade his LMS to Prime infrastructure and then migrate his WCS to NCS, but how do I know combine the both so that he is on one platform.
View 1 Replies View RelatedCisco :: Link Between NCS / Prime LMS And Prime Infrastructure 4.2
Mar 12, 2013What is the relation between: cisco NCScisco Prime LMSCisco Prime infrastructure.As i orderd a Cisco Prime infrastructure from a Cisco Partner and what i got is :
x2 cisco NCS appliances
x1 DVD cisco prime infrastructure
x1 DVD Cisco prime 4.2
Cisco Wireless :: Migrate AP 1121 By WCS?
May 1, 2012I wonder if you can migrate the cisco ap 1121 by WCS, could not find any specific documentation.
View 3 Replies View RelatedCisco :: Migrate From WLC4404 To WLC5508?
Jan 7, 2013 how to migrate from WLC4404 to WLC5508. I want to know your propositions.
I could replicate the configuration manually but there is a lot of confirugation menus and all. If both could be online and migrate the AP to the new one until there is none on the old one, it would be great.
Cisco :: Migrate WCS Base License To NCS 1.1?
Apr 3, 2013We are trying to migrate WCS base license to NCS 1.1 .We have procured the migration license .In the licensing guide , it is mentioned as "L-WCS-NCS1-M-K9 License first, before adding the licenses migrated from your WCS installation"
1)Whether we need to add this migration license in WCS before genrating XML file or
2)Before adding XML file in NCS we need to add this in NCS ..
Cisco WAN :: 857 ADSL - How To Migrate To FTTC
Mar 26, 2011convert a few connections from ADSL to FTTC but would like not to have to replace the Cisco 857 router already installed.To achieve this I would need to allocate one of the Ethernet ports as the WAN interface and configure PPPOE for authentication.
View 1 Replies View RelatedCisco :: Migrate WLC 4400 To 5500?
Aug 1, 2011l need change a wlc 4400 to 5500, but l don´t know what l need back up, and how can I do to join the H Reap APs in the new 5500 WLC because all H Reap APs that l have, are not in the same city , and I understand if l want join AP in the new WLC l need to connect in the same network segment, is it rigth ?
View 7 Replies View RelatedCisco VPN :: Migrate All Configs To New ASA 5540
Mar 21, 2011We setup both site-to-site VPN and Remote Access VPN client on VPN 3005 Concentrator. We want to migrate all the configs to the new ASA 5540. Do you recommend that we migrate all the configurations for VPN client first before setting up the site-to-site VPN on the ASA or it does not make any difference?
View 5 Replies View RelatedCisco Firewall :: R75-20 / Migrate From Checkpoint To ASA?
Sep 11, 2012what's required for the migration from Checkpoint R75-20 Splat install to the Cisco ASA firewall, links to documentation - step-by-step.
View 3 Replies View RelatedCisco Firewall :: Migrate From 887 Router To ASA5505?
Dec 7, 2012I have two router Cisco 887 with vpn site-to-site:
Site A:
crypto isakmp policy 1
encr 3des
authentication pre-share
crypto isakmp key ********* address 85.34.AAA.AAA
!
crypto ipsec transform-set strong esp-3des esp-md5-hmac
[code]....
I want to remove VPN configuration from the router and put VPN Configuration on Cisco ASA 5505.The scheme would be: ASA5505(vpn site-to-site) -> 887 -> INTERNET this for both sites.My problem is that I do not know what ip put on interface Outside of firewall. For example on Site A delete all VPN configuration from 887 and leave only ATM0.1 point-to-point, on intereface Outside of ASA put ip of loopback(of router 887) and as default route 85.34.2.XXX. Right?
Cisco Firewall :: Migrate Two ASA 5520 Stateful From 8.0 To 8.4
Jul 7, 2011We try to migrate two ASA stateful Active / Passive from version 8.0 to 8.4 but many of acl rules and Nat no longer working. We must go through the version 8.2? The release 8.4 changes everything and seems to me not too stable, it'sl best to stay in 8.2 or 8.3 !!!
View 3 Replies View RelatedCisco WAN :: 1812J Best Way To Migrate Config And Implement QoS?
Apr 26, 2012I am looking to upgrade an 1812J router to 1921/K9 router with 8-port double wide switch port.What's the best/easiest way to migrate the config? (We have access lists, vlans, etc. configured on the original device)Also, I'm looking for a way to prioritize traffic from an external site on the internal LAN. Reason being that I would like to prevent dropouts of interent streaming radio when Internal LAN traffic is high. If so, what's an easy way to implement on 1921?
View 1 Replies View RelatedCisco WAN :: Migrate To Metro Ethernet On 1841
Apr 21, 2011my company will change WAN connection from HDSL (2Mb/2Mb) to Metro Ethernet (10Mb/10Mb). Now, I have CISCO 1841 (12.4(15)T12 ) with 2 FE and HWIC-1T. Can i configure my Metro Ethernet (WAN Connection) on one FE or i need of "external wic" such as hwic-1FE ?
View 1 Replies View RelatedCisco Switching/Routing :: 6509 / Migrate VSS To New Set Of Chassis?
Dec 19, 2012Currently have a pair of 6509 chassis setup with VSS. Only have the Sup and two line cards in each chassis. Would like to replace with a new pair of 6504E chassis. Is it possible to fail one chassis at a time and migrate to the new 6504E?
View 3 Replies View RelatedCisco Application :: Can Migrate Config From ACE20 To ACE30
Feb 18, 2013I would like to know if I can migrate the config from ACE20 to ACE30 (last software) without any issue.I don't have any ACE30 to test
View 3 Replies View RelatedCisco Firewall :: Migrate Static Nat From PIX804 To ASA845?
Jan 23, 2013I have configuration on PIX804 :
On Pix804
interface Ethernet2
nameif ins10
[Code]....
On PIX515T(804) in packet-tracert option no Phase 1 - Route-lookup and both static nat works fine. May I disable on ASA phase route-lookup, that it not send packet on wrong interfaces ?
Cisco WAN :: Migrate BGP Border Router / C7600 IOS To ASR9K?
Dec 28, 2012Doing a migration. During comparison of "show bgp nei x.x.x.x advertised-routes" between existing C7600 vs new ASR9K. Found that there were some r>i (RIB-Failure) route in C7600 doesn't flagged w/ r>i in ASR9K. Is it normal behaviour in ASR9K? How can I perserve r>i on ASR9K? Due to my IGP (e.g. AD etc) issue or ASR9K IOS-XR hidden config / default config issue?
View 5 Replies View RelatedCisco Switching/Routing :: To Migrate Switch AP From WLC To Other 3502
Feb 21, 2012I try to remplace WLC because the old wlc (7.0) is capacity full.but the AP (3502) do not "registered" to new WLC (7.3),If you have a idea, without make a reset factory to AP.
View 1 Replies View RelatedCisco Switching/Routing :: 3502 - How To Migrate Switch AP From WLC To Other One
Mar 11, 2013I try to replace WLC because the old wlc (7.0) is capacity full. but the AP (3502) do not "registered" to new WLC (7.3). Don't want to make a reset factory to AP..
View 3 Replies View RelatedCisco Firewall :: ASA 5510 Migrate Flash Cards
Jun 22, 2011I need to upgrade the compact flash of my ASA 5510 from 256MB to 512MB. A friend's recommendation was to buy a card reader, copy all of the data from the existing card and paste it to the new compact flash. I have a hard time believing that it's that straight forward.
Any safer, more foolproof way of migrating between flash cards?
Cisco Firewall :: Migrate Multiple Static NAT From ASA 7.x To IOS Router?
Feb 24, 2012I need to replace an ASA with an IOS firewall router, and am not sure how to migrate the NAT configuration. Specifically, there is an interface "3rdparty" that has onward connectivity to other private addresses, so our internal addressing is hidden. For some reason there are static NAT rules in different directions across the interface, but at present I cannot see why. Thinking in router terms, all that springs to mind is the inside and outside tags for the interfaces, but also that it might need "overlapping" NAT to be configured.
[code]...
Cisco Firewall :: ASA 5510 To Migrate Single Checkpoint
Dec 18, 2012I am working on a project to migrate a single Checkpoint firewall over to a single ASA 5510, no VPN, just firewall. The checkpoint firewall has 8 physical interface so the ASA 5510 also support physical 8 interfaces so thiw will be a one-to-one swap. At the moment, I don't have an ASA 5510 to test my theory so I am going to throw it out here. The checkpoint firewall is a SPLAT running on an powerfull IBM Server with 8 CPU dual cores with 32GB of RAM and it has 1200 rules with over 120,000 objects with some of the crazy NATs but it works so we will just leave it at that. There are not that much traffics going across the firewall so there are no need to put in an ASA 5585
I use the cisco conversion tool to do the policy conversion from Checkpoint to Cisco, I get about 1.5 million lines in the configuration. A lot of it has to do with Checkpoint having no concept of interface security level while ASA does. I am sure I can optimize it to cut down the number of lines in the configuration; however, that is not my main concern at the moment. The customer goal is that at the time when cutover from Checkpoint to Cisco ASA, they want everything to be perfect, meaning that it will work like magic.
My question is that can the ASA 5510 handle 1.5 million lines of configuration? Are there any limitations on this? I know there are limitations with FWSM but since I don't have an 5510 to test.
Cisco Wireless :: 5508 - Unable To Migrate AP's From One Controller To Another
Aug 20, 2012I have a 5508 at a remote site and a 5508 at my main campus. I was doing some work on the remote site's controller, so I changed option 43 on our DNS/DHCP system, then applied an LWAPP template from NCS to the AP's to migrate them to the controller at my main campus (so users could still utilize the wireless at the remote site). They all moved over to the temporary (main campus) controller without an issue.
When I was ready to migrate the AP's back to their local (remote site) controller - I changed option 43 for each sub net that contained AP's @ the remote site to point back to their local controller's management IP address, pushed an LWAPP template again (pointing it to the local controller obviously) and apply template/reboot AP.
The AP reboots, disassociates from the main campus (temporary) controller, but when it comes back up a few minutes later - it associates BACK to the main campus controller it was on instead of to the remote site/local controller like option 43, the LWAAP template (and my frustrated screams) are now telling it to. I'm certain I'm just missing something.
AAA/Identity/Nac :: Procedure To Migrate From ACS SE 4.0.1 (1112) To ACS SE 5.2 (1121)
Jan 11, 2012I have to migrate two appliances ACS SE 1112 under 4.0.1 to new two appliances ACS SE 1121 under 5.2 version.I would like to clarify the procedure to do it by minimizing down time impact.I saw there are Migration Utility and Import Tool but do I need an Intermediate Windows Server to do this migration ?
View 1 Replies View RelatedCisco Wireless :: 5508 Can Migrate Web Authentication Certificate Used For Guests
Sep 3, 2012I am planning to migrate from an old 4400 to a new 5508. I am happy with migrating the access points but I need to know if I can migrate the web authentication certificate used for guests.The new WLC will have the same virtual interface and DNS name to match the CN on the current certificate. Will this work or will I need a new certificate?
View 2 Replies View RelatedCisco Firewall :: 5550 Migrate From Multiple Context To Single
Aug 12, 2012I have a Failover pair of ASA5550's running ASDM 6.2(5) and ASA 8.2(2). Originally they were setup with 2 context's and an admin context but one of the contexts has now been removed. I would like to now migrate to single mode before I go about patching them to the latest software.
View 4 Replies View RelatedCisco Switching/Routing :: 2811 - Migrate IP Address To Other Interface
Aug 29, 2012I have a Cisco 2811 with fa 0/0 as my bearer, and a switch module for internal clients.
I have an issue with my fa 0/0 flapping, I want to move that ip configuration to fa 0/1
as this is a branch office I am reliant on the bearer port to give me coms so changing the IP addresses is difficult.
Has any one tried this with a TCL script?
Cisco Switches :: SG500 - Migrate From Default VLAN1 To Different VLAN
Mar 1, 2013I have an SG500 that is already deployed with some Access VLANs on it. The PVID is still the default 1. I am trying to change it to 19 with as little interruption as possible. If I just go to the VLAN Management Tab and change the Default VLAN to 19 and reboot the switch, will it migrate my management IP to the default VLAN without any trouble? Would it be less interruption to: Create VLAN 19, assign it an out of subnet IP address, change a port to PVID 19, connect directly to that port, go to that IP address, remove the original management IP from PVID1, change all the ports to PVID19 then change the management IP back to the original?
View 1 Replies View RelatedCisco Firewall :: Migrate Checkpoint Configurations To ASA 5585 Using SCT Tool
Oct 28, 2011I am trying to migrate checkpoint configs to ASA 5585 using SCT tool, this tool asking me to feed it *.W file from checkpoint which is suppose to be a rule definition file on CP, but I cant find it
View 14 Replies View RelatedCisco VPN :: ASA5520 - Migrate Configuration / Certificates And Private Keys?
Apr 1, 2013I am going to migrate an ASA5520 with another one having VPN configuration+certificates etc. I am a bit concern about the certificates. Shall I need a new certificate because of new IP addresses on the new ASA ? Should I configure the same IP in order to avoid this. There are many VPN clients with public keys that also need to change. Is there any way for minimal changes for migration ?
View 4 Replies View Related