Cisco Firewall :: R75-20 / Migrate From Checkpoint To ASA?
Sep 11, 2012what's required for the migration from Checkpoint R75-20 Splat install to the Cisco ASA firewall, links to documentation - step-by-step.
View 3 Replies
ADVERTISEMENT
Cisco Firewall :: ASA 5510 To Migrate Single Checkpoint
Dec 18, 2012I am working on a project to migrate a single Checkpoint firewall over to a single ASA 5510, no VPN, just firewall. The checkpoint firewall has 8 physical interface so the ASA 5510 also support physical 8 interfaces so thiw will be a one-to-one swap. At the moment, I don't have an ASA 5510 to test my theory so I am going to throw it out here. The checkpoint firewall is a SPLAT running on an powerfull IBM Server with 8 CPU dual cores with 32GB of RAM and it has 1200 rules with over 120,000 objects with some of the crazy NATs but it works so we will just leave it at that. There are not that much traffics going across the firewall so there are no need to put in an ASA 5585
I use the cisco conversion tool to do the policy conversion from Checkpoint to Cisco, I get about 1.5 million lines in the configuration. A lot of it has to do with Checkpoint having no concept of interface security level while ASA does. I am sure I can optimize it to cut down the number of lines in the configuration; however, that is not my main concern at the moment. The customer goal is that at the time when cutover from Checkpoint to Cisco ASA, they want everything to be perfect, meaning that it will work like magic.
My question is that can the ASA 5510 handle 1.5 million lines of configuration? Are there any limitations on this? I know there are limitations with FWSM but since I don't have an 5510 to test.
Cisco Firewall :: Migrate Checkpoint Configurations To ASA 5585 Using SCT Tool
Oct 28, 2011I am trying to migrate checkpoint configs to ASA 5585 using SCT tool, this tool asking me to feed it *.W file from checkpoint which is suppose to be a rule definition file on CP, but I cant find it
View 14 Replies View RelatedCisco Firewall :: Have Checkpoint But Want To Add ASA 5505 SSL VPN?
Dec 10, 2011I have 5 static public IP addresses at my disposal. A checkpoint firewall with VPN access provides remote access for mobile users. How would I go about integrating the ASA 5505 SSL VPN into this network so some mobile users could continue using the checkpoint VPN client while others could have SSL VPN remote access? Attached is a graphic of the network.
View 2 Replies View RelatedCisco AAA/Identity/Nac :: Configure ACS 5.2 And Checkpoint For Firewall Admin
Aug 5, 2012how to configure ACS 5.2 for device administration of Checkpoint firewalls and security management servers?
View 4 Replies View RelatedRouters / Switches :: Cannot Switch Behind Checkpoint Firewall
Mar 14, 2011Running EIGRP on network. Hub router connects to remote router via EIGRP and then I have 2 static routes getting traffic to the switch behind the checkpoint firewall(Edge-1 UTM). Some switches I can access while others I cannot.
View 1 Replies View RelatedCisco Firewall :: Migrate From 887 Router To ASA5505?
Dec 7, 2012I have two router Cisco 887 with vpn site-to-site:
Site A:
crypto isakmp policy 1
encr 3des
authentication pre-share
crypto isakmp key ********* address 85.34.AAA.AAA
!
crypto ipsec transform-set strong esp-3des esp-md5-hmac
[code]....
I want to remove VPN configuration from the router and put VPN Configuration on Cisco ASA 5505.The scheme would be: ASA5505(vpn site-to-site) -> 887 -> INTERNET this for both sites.My problem is that I do not know what ip put on interface Outside of firewall. For example on Site A delete all VPN configuration from 887 and leave only ATM0.1 point-to-point, on intereface Outside of ASA put ip of loopback(of router 887) and as default route 85.34.2.XXX. Right?
Cisco Firewall :: Migrate Two ASA 5520 Stateful From 8.0 To 8.4
Jul 7, 2011We try to migrate two ASA stateful Active / Passive from version 8.0 to 8.4 but many of acl rules and Nat no longer working. We must go through the version 8.2? The release 8.4 changes everything and seems to me not too stable, it'sl best to stay in 8.2 or 8.3 !!!
View 3 Replies View RelatedCisco Firewall :: Migrate Static Nat From PIX804 To ASA845?
Jan 23, 2013I have configuration on PIX804 :
On Pix804
interface Ethernet2
nameif ins10
[Code]....
On PIX515T(804) in packet-tracert option no Phase 1 - Route-lookup and both static nat works fine. May I disable on ASA phase route-lookup, that it not send packet on wrong interfaces ?
Cisco Firewall :: ASA 5510 Migrate Flash Cards
Jun 22, 2011I need to upgrade the compact flash of my ASA 5510 from 256MB to 512MB. A friend's recommendation was to buy a card reader, copy all of the data from the existing card and paste it to the new compact flash. I have a hard time believing that it's that straight forward.
Any safer, more foolproof way of migrating between flash cards?
Cisco Firewall :: Migrate Multiple Static NAT From ASA 7.x To IOS Router?
Feb 24, 2012I need to replace an ASA with an IOS firewall router, and am not sure how to migrate the NAT configuration. Specifically, there is an interface "3rdparty" that has onward connectivity to other private addresses, so our internal addressing is hidden. For some reason there are static NAT rules in different directions across the interface, but at present I cannot see why. Thinking in router terms, all that springs to mind is the inside and outside tags for the interfaces, but also that it might need "overlapping" NAT to be configured.
[code]...
Cisco Firewall :: 5550 Migrate From Multiple Context To Single
Aug 12, 2012I have a Failover pair of ASA5550's running ASDM 6.2(5) and ASA 8.2(2). Originally they were setup with 2 context's and an admin context but one of the contexts has now been removed. I would like to now migrate to single mode before I go about patching them to the latest software.
View 4 Replies View RelatedCisco Firewall :: ASA 5550 - Migrate From Multiple Context To Single
Jun 13, 2012I have a Fail over pair of ASA5550's running ASDM 6.2(5) and ASA 8.2(2). Originally they were setup with 2 context's and an admin context but one of the contexts has now been removed. I would like to now migrate to single mode before I go about patching them to the latest software.
View 2 Replies View RelatedCisco Firewall :: Migrate To Multiple Context Mode On ASA 5520s Cluster?
Jun 4, 2012I have a pair of ASA 5520s in active/standby failover mode, single context. I'll be migrating to multiple context mode later this week. Do I need to break failover first? Or if I don't need to, should I? Or can I do this while maintaining failover? Can either of these scenarios will work (or fail). I'll be remote, doing my work via SSH, but have somebody local who can console in if needed.
Migration option #1
Log into active/primary ASA
Configure Multiple Context mode
Reboot both devices
Login to active/primary ASA
[code]....
Cisco Firewall :: Migrate Standby ASA 5540 To Backup Data Center?
Oct 11, 2012We have backup data center where I am now planning to provide backup internet service ( in the case where there is internet down or power outage at main server room) . I have a pair of Cisco ASA's 5540, one of which I need to move to backup data center ( BDC), Presently I have ADSL router at disaster serve room with static public IP from ISP.
Currently, I am publishing all my internal resources through ASA. Now my questions, if I move Standby ASA to Disaster Server Room. How I can publish the same internal resources through standby ASA and make it standby as active during the down time of main server room
Cisco VPN :: For VPN Between ASA5520 And Checkpoint R55
May 16, 2013we are trying to configure the vpn with our provider we are on Asa and the use Checkpoint , vpn seem to be established on phase 1 and phase 2 too.bur when i send ping packets seem to los on tunnel and other side do not see them.Asa is after a onother firewall and outside interface of this asa is nated on this perimeter firewall.
View 5 Replies View RelatedCisco VPN :: VPN Between ASA 5505 And Checkpoint
Dec 6, 2011I have set up a VPN tunnel using pre-shared keys between my ASA5505 and a Checkpoint firewall (another company).
I can initiate the tunnel from my side, but they cannot open it from their side. We get Phase2 failures.
The other company is saying:
"Your ASA is expecting my CheckPoint to negotiate the phase 2 timeouts in both seconds and kilobytes. Enabling kilobyte timeouts is not something that is currently realistically feasible on my side, so I ask that you disable/turn off kilobyte timeouts on your side"
However, I do not have a kilobyte timeout specified in the security association for the tunnel, only a seconds.
Is there a hidden default setting I have to turn off? If so, how do I do this?
Cisco VPN :: VPN L2L ASA Checkpoint R71 Cannot Make Pin
Feb 17, 2011I have a problem with a L2L VPN between ASA and Checkpoint R71 VPN I can ping it up to the network that is behind the checkpoint but they can not make me pin.
View 3 Replies View RelatedCisco VPN :: 800 Router To CheckPoint IPSEC VPN
Jul 15, 2012I am trying to get a simple IPSEC VPN between a Cisco 800 router and a CheckPoint firewall.The Phase 1 negotiation is working fine.
View 1 Replies View RelatedCisco VPN :: ASA Running 8.4(2) To Checkpoint R70 Tunnel
Dec 11, 2011I have an ASA running 8.4(2) code.
I have been trying to get a VPN tunnel established between this device and a Checkpoint R70 firewall, but have been getting nowehere.
The settings are:
Encap: ESP
Encryption: AES256
Hash: SHA1
DH: Group 2 (1024)
Authentication: pre-share
lifetime: 1440 min / 4096000 KB
I can open the tunnel from the ASA to the Checkpoint, but the Checkpoint cannot open a tunnel with the ASA. It looked like the issue originally was the KB timout which was turned off on the Checkpoint side. They have since added that (4096000), but we are getting Phase2 failures.
How to create a tunnel between an ASA running 8.4(2) and a Checkpoint R70?
I am beginning to think that I have incompatible systems Is it a PFS issue? If so, how do I enable that in the policy section?
Checkpoint Vpn Server For 500 Users
May 3, 2012I want the vpn device for about 320 users
View 2 Replies View RelatedCisco Routers :: Setting Up VPN Between RV082 And Checkpoint Device?
Jun 10, 2013We are setting up a vpn between a cisco RV082 and a checkpoint device. From the Cisco device we have set up (as remote IP) the public IP 85.xxx.xxx.xxx but when we try to start the tunnel the VPN log (from RV082) report the error "INVALID_ID_INFORMATION" as described below.
Jun 11 11:38:41 2013 VPN Log (g2gips1) #894: sending encrypted notification INVALID_ID_INFORMATION to 85.xxx.xxx.xxx:500
Jun 11 11:38:41 2013 VPN Log (g2gips1) #894: we require peer to have ID '85.xxx.xxx.xxx', but peer declares '10.yy.yy.yyy'
[code]....
The IP 10.yy.yy.yyy. reported in the log is the natted ip of the Checkpoint device.
Cisco :: Migrate From WCS 7.0.172.0 To Prime NCS
Mar 12, 2012Is there anyway to migrate off of WCS to Prime NCS? We have a fully built WCS system with maps and all configs and was wondering if there was a way to restore to NCS.
View 1 Replies View RelatedCisco Wireless :: Migrate AP 1121 By WCS?
May 1, 2012I wonder if you can migrate the cisco ap 1121 by WCS, could not find any specific documentation.
View 3 Replies View RelatedCisco :: Migrate From WLC4404 To WLC5508?
Jan 7, 2013 how to migrate from WLC4404 to WLC5508. I want to know your propositions.
I could replicate the configuration manually but there is a lot of confirugation menus and all. If both could be online and migrate the AP to the new one until there is none on the old one, it would be great.
Cisco :: Migrate WCS Base License To NCS 1.1?
Apr 3, 2013We are trying to migrate WCS base license to NCS 1.1 .We have procured the migration license .In the licensing guide , it is mentioned as "L-WCS-NCS1-M-K9 License first, before adding the licenses migrated from your WCS installation"
1)Whether we need to add this migration license in WCS before genrating XML file or
2)Before adding XML file in NCS we need to add this in NCS ..
Cisco WAN :: 857 ADSL - How To Migrate To FTTC
Mar 26, 2011convert a few connections from ADSL to FTTC but would like not to have to replace the Cisco 857 router already installed.To achieve this I would need to allocate one of the Ethernet ports as the WAN interface and configure PPPOE for authentication.
View 1 Replies View RelatedCisco :: Migrate WLC 4400 To 5500?
Aug 1, 2011l need change a wlc 4400 to 5500, but l don´t know what l need back up, and how can I do to join the H Reap APs in the new 5500 WLC because all H Reap APs that l have, are not in the same city , and I understand if l want join AP in the new WLC l need to connect in the same network segment, is it rigth ?
View 7 Replies View RelatedCisco VPN :: Migrate All Configs To New ASA 5540
Mar 21, 2011We setup both site-to-site VPN and Remote Access VPN client on VPN 3005 Concentrator. We want to migrate all the configs to the new ASA 5540. Do you recommend that we migrate all the configurations for VPN client first before setting up the site-to-site VPN on the ASA or it does not make any difference?
View 5 Replies View RelatedCisco :: Migrate From WCS 7.0 To Prime Infrastructure 1.2
May 28, 2013I am looking for the licensing and upgrade path for going from WCS 7.0 to PI 1.2.At present I have a WCS licensed for 200 APs which is managing one controller and 150 APs.I intend to use the Cisco Prime Upgrade Promotion to order R-W-PI12-M-K9 (WCS 7.0 to Cisco Prime Infrastructure 1.2 Migration) and L-W-PI12-100-M and L-W-PI12-100-M to match the number of licenses on the WCS.
Once Prime is installed I also want to manage another 50 devices, does that mean I have to purchase the Cisco PI 1.2 Base License and Software (R-PI12-Base-K9) and another 50 Lifecycle licenses, or will my existing 200 licenses from the upgrade suffice.
Cisco WAN :: 1812J Best Way To Migrate Config And Implement QoS?
Apr 26, 2012I am looking to upgrade an 1812J router to 1921/K9 router with 8-port double wide switch port.What's the best/easiest way to migrate the config? (We have access lists, vlans, etc. configured on the original device)Also, I'm looking for a way to prioritize traffic from an external site on the internal LAN. Reason being that I would like to prevent dropouts of interent streaming radio when Internal LAN traffic is high. If so, what's an easy way to implement on 1921?
View 1 Replies View RelatedCisco WAN :: Migrate To Metro Ethernet On 1841
Apr 21, 2011my company will change WAN connection from HDSL (2Mb/2Mb) to Metro Ethernet (10Mb/10Mb). Now, I have CISCO 1841 (12.4(15)T12 ) with 2 FE and HWIC-1T. Can i configure my Metro Ethernet (WAN Connection) on one FE or i need of "external wic" such as hwic-1FE ?
View 1 Replies View RelatedCisco :: LMS 4.1 - Upgrade To Prime Infrastructure / Migrate WCS To NCS?
Apr 2, 2012I have a client who has LMS 4.1 with SAS support, I know that I can upgrade him to the Prime infrastructure for LMS and NCS, however he is licensed for 100 devices. He also has WCS 7.0 with 50 AP licenses, I want to upgrade his LMS to Prime infrastructure and then migrate his WCS to NCS, but how do I know combine the both so that he is on one platform.
View 1 Replies View Related