Cisco VPN :: VPN L2L ASA Checkpoint R71 Cannot Make Pin
Feb 17, 2011I have a problem with a L2L VPN between ASA and Checkpoint R71 VPN I can ping it up to the network that is behind the checkpoint but they can not make me pin.
View 3 Replies
ADVERTISEMENT
Cisco VPN :: For VPN Between ASA5520 And Checkpoint R55
May 16, 2013we are trying to configure the vpn with our provider we are on Asa and the use Checkpoint , vpn seem to be established on phase 1 and phase 2 too.bur when i send ping packets seem to los on tunnel and other side do not see them.Asa is after a onother firewall and outside interface of this asa is nated on this perimeter firewall.
View 5 Replies View RelatedCisco VPN :: VPN Between ASA 5505 And Checkpoint
Dec 6, 2011I have set up a VPN tunnel using pre-shared keys between my ASA5505 and a Checkpoint firewall (another company).
I can initiate the tunnel from my side, but they cannot open it from their side. We get Phase2 failures.
The other company is saying:
"Your ASA is expecting my CheckPoint to negotiate the phase 2 timeouts in both seconds and kilobytes. Enabling kilobyte timeouts is not something that is currently realistically feasible on my side, so I ask that you disable/turn off kilobyte timeouts on your side"
However, I do not have a kilobyte timeout specified in the security association for the tunnel, only a seconds.
Is there a hidden default setting I have to turn off? If so, how do I do this?
Cisco VPN :: 800 Router To CheckPoint IPSEC VPN
Jul 15, 2012I am trying to get a simple IPSEC VPN between a Cisco 800 router and a CheckPoint firewall.The Phase 1 negotiation is working fine.
View 1 Replies View RelatedCisco Firewall :: Have Checkpoint But Want To Add ASA 5505 SSL VPN?
Dec 10, 2011I have 5 static public IP addresses at my disposal. A checkpoint firewall with VPN access provides remote access for mobile users. How would I go about integrating the ASA 5505 SSL VPN into this network so some mobile users could continue using the checkpoint VPN client while others could have SSL VPN remote access? Attached is a graphic of the network.
View 2 Replies View RelatedCisco Firewall :: R75-20 / Migrate From Checkpoint To ASA?
Sep 11, 2012what's required for the migration from Checkpoint R75-20 Splat install to the Cisco ASA firewall, links to documentation - step-by-step.
View 3 Replies View RelatedCisco VPN :: ASA Running 8.4(2) To Checkpoint R70 Tunnel
Dec 11, 2011I have an ASA running 8.4(2) code.
I have been trying to get a VPN tunnel established between this device and a Checkpoint R70 firewall, but have been getting nowehere.
The settings are:
Encap: ESP
Encryption: AES256
Hash: SHA1
DH: Group 2 (1024)
Authentication: pre-share
lifetime: 1440 min / 4096000 KB
I can open the tunnel from the ASA to the Checkpoint, but the Checkpoint cannot open a tunnel with the ASA. It looked like the issue originally was the KB timout which was turned off on the Checkpoint side. They have since added that (4096000), but we are getting Phase2 failures.
How to create a tunnel between an ASA running 8.4(2) and a Checkpoint R70?
I am beginning to think that I have incompatible systems Is it a PFS issue? If so, how do I enable that in the policy section?
Checkpoint Vpn Server For 500 Users
May 3, 2012I want the vpn device for about 320 users
View 2 Replies View RelatedCisco AAA/Identity/Nac :: Configure ACS 5.2 And Checkpoint For Firewall Admin
Aug 5, 2012how to configure ACS 5.2 for device administration of Checkpoint firewalls and security management servers?
View 4 Replies View RelatedCisco Routers :: Setting Up VPN Between RV082 And Checkpoint Device?
Jun 10, 2013We are setting up a vpn between a cisco RV082 and a checkpoint device. From the Cisco device we have set up (as remote IP) the public IP 85.xxx.xxx.xxx but when we try to start the tunnel the VPN log (from RV082) report the error "INVALID_ID_INFORMATION" as described below.
Jun 11 11:38:41 2013 VPN Log (g2gips1) #894: sending encrypted notification INVALID_ID_INFORMATION to 85.xxx.xxx.xxx:500
Jun 11 11:38:41 2013 VPN Log (g2gips1) #894: we require peer to have ID '85.xxx.xxx.xxx', but peer declares '10.yy.yy.yyy'
[code]....
The IP 10.yy.yy.yyy. reported in the log is the natted ip of the Checkpoint device.
Cisco Firewall :: ASA 5510 To Migrate Single Checkpoint
Dec 18, 2012I am working on a project to migrate a single Checkpoint firewall over to a single ASA 5510, no VPN, just firewall. The checkpoint firewall has 8 physical interface so the ASA 5510 also support physical 8 interfaces so thiw will be a one-to-one swap. At the moment, I don't have an ASA 5510 to test my theory so I am going to throw it out here. The checkpoint firewall is a SPLAT running on an powerfull IBM Server with 8 CPU dual cores with 32GB of RAM and it has 1200 rules with over 120,000 objects with some of the crazy NATs but it works so we will just leave it at that. There are not that much traffics going across the firewall so there are no need to put in an ASA 5585
I use the cisco conversion tool to do the policy conversion from Checkpoint to Cisco, I get about 1.5 million lines in the configuration. A lot of it has to do with Checkpoint having no concept of interface security level while ASA does. I am sure I can optimize it to cut down the number of lines in the configuration; however, that is not my main concern at the moment. The customer goal is that at the time when cutover from Checkpoint to Cisco ASA, they want everything to be perfect, meaning that it will work like magic.
My question is that can the ASA 5510 handle 1.5 million lines of configuration? Are there any limitations on this? I know there are limitations with FWSM but since I don't have an 5510 to test.
Routers / Switches :: Cannot Switch Behind Checkpoint Firewall
Mar 14, 2011Running EIGRP on network. Hub router connects to remote router via EIGRP and then I have 2 static routes getting traffic to the switch behind the checkpoint firewall(Edge-1 UTM). Some switches I can access while others I cannot.
View 1 Replies View RelatedCisco Firewall :: Migrate Checkpoint Configurations To ASA 5585 Using SCT Tool
Oct 28, 2011I am trying to migrate checkpoint configs to ASA 5585 using SCT tool, this tool asking me to feed it *.W file from checkpoint which is suppose to be a rule definition file on CP, but I cant find it
View 14 Replies View RelatedCisco WAN :: How To Make NAT On Stick (881)
Aug 20, 2012I try to make Nat on a stick, but not successful.
Network Diagram
Config File
interface Loopback0ip address 10.0.1.1 255.255.255.252ip nat outsideip virtual-reassembly!!
interface FastEthernet0!!interface FastEthernet1!!interface FastEthernet2!!interface FastEthernet3!!interface FastEthernet4ip address 60.160.60.138 255.255.255.248
[Code].....
Cisco :: How To Make LMS 4.2 Recognize It As Acs 5.x
Dec 6, 2012i have an ACS Appliance 5.x but the LMS 4.2 doesn't;t recognize it as Cisco device , and give him the sign ? how to make LMS 4.2 recognize it as acs
View 3 Replies View RelatedCisco WAN :: Make 3G Card For AT&T With 881
Jul 18, 2012The 3G card that I've been deploying for some remote users, using the 881 that live in remote areas have an esn number for Verizon. Can I order a card that would be used with AT&T?
View 3 Replies View RelatedCisco Switches :: Cannot Make Any Changes To SF-302-08MP
Nov 7, 2011This is the third series 300 switch I've configured, but have not run across this issue before. I've attached to the switch via the console port and even tried with the web interface but get the same results. Upon booting the switch asks for the default user ID and password, then it prompts to change the password. I do this and then go to configure the device with the new IP address, add a new user ID and password and VLAN. All changes seem to save as I get no errors. However, when the device is rebooted, all changes are lost. I've even went so far as to delete the startup-config file but still no luck. Version information is as follows:
SW Version: 1.0.0.27 (Date: 28-Apr-2010, Time: 13:33:55)
Boot Version: 1.0.0.4 (Date: 08-Apr-2010, Time: 16:37:57)
HW Version: V01
Cisco Firewall :: Asa 5510 Can't Make PAT
Nov 27, 2011according to this document I do port translation through CLI and I have following config:
View 4 Replies View RelatedCisco VPN :: 5505 - Make ASA Use DNS Server Via L2L?
Mar 29, 2011 I have a ASA5505 in a branch connected to the head office via L2L-VPN. The clients at the inside of the ASA can use the DNS servers in the head office through the VPN tunnel. The ASA is configured to use these DNS servers, too.
dns domain-lookup outsidedns domain-lookup ADMdns domain-lookup insidedns server-group DefaultDNS name-server 172.17.6.225 name-server 172.17.6.227 domain-name some.name management-access ADM
The VPN ist connecting the networks behind interfaces inside and ADM to the network at the head office.
When the ASA is resolving a hostname it tires to use these servers. But it does via outside interface.
gw700# ping heise.deMar 30 2011 07:58:49: %ASA-6-302015: Built outbound UDP connection 35360 for outside:172.17.6.225/53 (172.17.6.225/53) to identity:117.135.114.78/2117 (117.135.114.78/2117)DNS: get global group DefaultDNS
[Code].....
How To Make PC As A Public IP
Jan 4, 2011how can i make my PC as public IP? do i need to wrt som servlet program 4 it?and how to mak my mobile as public IP by setting its domain?
View 1 Replies View RelatedMake 802.11g USB Device An APP?
Feb 18, 2012My PC is connected to a wired network in the office. I have a 802.11g USB device. I want to hook the device to my PC's USB and make it an access point for the wifi enabled devices i.e. cellphones and laptops in the department so they can use the internet. The PC has Windows 7 installed.
View 3 Replies View RelatedHow To Make LAN Of 20 Computers
Dec 21, 2012Buy 24port Network Switch connect all 20 computer to it using LAN wire configure the IP Address & Sub mask individually to each computer (Rem: # every IP Address should be similar in first 3rd Quads & 4th Quad should be UNIQUE i.e, 192.168.0.1 then 192.168.0.2 and so on to 192.168.0.20) then input Subnet Mask as 255.255.255.0.Apply & Restart every computer inividually.
View 2 Replies View RelatedCisco :: To Make The Internet Efficient And Secure
May 25, 2012I am completing a project as part of my 2nd year studies and I am at the stage of testing on the network but before I go ahead with this stage, I would like some feedback on what I could do to make my network more efficient and secure.passwords are: ciscothe link is the packet tracer file I am working on.url
View 6 Replies View RelatedCisco :: 1140 AP Trying To Make It Invisible And Could Not Be Detected
Feb 9, 2012I'm configuring an 1140 and trying to make it invisable to any user that doesnt know the SSID. The SSID is not broadcast, however my clients see "Other Network" in their list of available networks. Short of turning off the AP is there any way through the 1140's configuration to prevent this "Other Network" from showing up in the clients available networks list.
View 2 Replies View RelatedCisco WAN :: 877 Router Can't Make VPN Connection To HQ Office
Jul 16, 2011i just managed to config the Cisco 877 and send it to my client,when the client connect the router from his location the router can't make VPN connection to my HQ office,i can connect to the router using the external IP adress,i tried to reset the VPN tunnel but no avail,
View 3 Replies View RelatedCisco Switching/Routing :: 871 Doesn't Let To Make Changes?
Jul 2, 2012Our 871 no longer allows us to make changes to it. I was told the contract ran out, so I renewed it and Cisco support then added the contract to my serial number. What now? Is there a step required to have the router check in with Cisco so that it becomes "unlocked" for me to make changes?
View 1 Replies View RelatedCisco :: 3750 - How To Make Interface VLan
Mar 19, 2012i have linksys modem which already working for different v lans then for lab we take other switch 3750 switch and created different v lans. v lans are working fine but we need internet for different v lans for that linksys modem how we can make interface V lan1/
ip address 10.1.1.10 255.255.255.0
ip default- gateway 10.1.1.1
no sh
interface Vlan10
ip address 10.1.2.1 255.255.255.0
no ip route-cache
!!interface Vlan20
ip address 10.1.3.1 255.255.255.0
ip route 0.0.0.0 0.0.0.0 10.1.1.1
ip dhcp pool vlan10
network 10.1.2.0 255.255.255.0
default-router 10.1.2.1
dns-server 10.1.1.1
!
!ip dhcp pool vlan20 network 10.1.3.0 255.255.255.0 default-router 10.1.3.1 dns-server 10.1.1.1
Cisco AAA/Identity/Nac :: Unable To Make Backup In ACS 5.1
Jan 28, 2012When I'm trying to make backup in ACS5.1(in log collector node) it gives me the following error:
FullBackupOnDemand-Job Incremental Backup Utility System Wed Jul 13 16:50:23 EEST 2011 Incremental Backup Failed: CARS_APP_BACKUP_FAILED : -404 : Application backup error Failed,I did it via Monitoring Configuration -> System Operation -> Removal and Backup and then "Backup now" bottom.
I tried to restart ACS services through cli (application stop/start) and different repositories (ftp, tftp) but without success.
Cisco WAN :: 881W / 1941 ISR - Possible To Make QoS Rules
Jan 24, 2013We've got vpn-concentrator and 15 offices with 881w and 1941 isr connected vo it via ipsec. Our Asterisk is placed behind this vpn-concentrator in local network, so all traffice goes throung vpn tunnels. Is it possible to make QoS rules using just destination IP address of our Asterisk server?
View 7 Replies View RelatedCisco VPN :: 1941 Make VPN With Public IP Addresses
Mar 27, 2012i have Cisco 1941(with security lic) and i have been asked to make a VPN with public IP addresses so there will be no info about internal networks. Other side has ASA 5520 and they provided me with 2 public IP addresses. i have done many different VPNs but this is first with public IP addresses and i cannot figure it out.So here is the question:
1. How to do it ? (maybe some example)
2. Do i need two public IPs to do it ?
Cisco Routers :: How To Make Subnet With RV042
Jul 10, 2012I have RV042 Router, I'm using only one Internet conection, I'm using IP group like this 192.168.95.x, my DHCP setting use 192.168.95.120 to 192.168.95.240, but in this time I have 245 workstations (may be I will have 25 additionals workstations) and some times I see IP conflict message in my current work stations.
I had read about SUBNET like response about my problem, but I'm not sure about that and how to make subnet with my RV042.
Cisco Firewall :: 5510 - ASA 8.2.5 To Make VPN Connection From LAN To Outside?
Sep 19, 2011i have a 5510 with SDM 8.2.5 from clients connected to LAN i cant open a VPN connection! (using windows client L2TP or PPTP) there is not rules tho block this ports, why i cant connect?
my configuration:
FIREWALLP01# show running-config
: Saved
:
ASA Version 8.2(5)
!
hostname FIREWALLP01
domain-name MAIOR.local
enable password 28kg/dOQX80WtMHA encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
[code]....
Cisco WAN :: 6500 Make Crash And Go To ROMmon
Sep 11, 2012I have a rare case. switch 6500 make crash and go to rommon. when review the crash appear that the switch charge the configuration from nvram, but, at the ending there are a few line command, that make the switch go to crash.. then I have to booting from rommon and start again. I use the version 12.2.33.sxi9 and 12.2.sxi3 and the configregister is 0x2102
I think that the switch get the startup-config file from other file-system.
*Sep 1 03:42:42.352 Inviern: %SYS-5-CONFIG_I: Configured from memory by console
access-list 199 permit icmp host 10.10.10.10 host 20.20.20.20
crypto map NiStTeSt1 10 ipsec-manual
match address 199
set peer 20.20.20.20
exit
no access-list 199
no crypto map NiStTeSt1
*Sep 1 03:42:46.952 Inviern: %SYS-5-RESTART: System restarted.