The 3G card that I've been deploying for some remote users, using the 881 that live in remote areas have an esn number for Verizon. Can I order a card that would be used with AT&T?
View 3 Replies
i have an old hp ipaq pocket pc (really old) but a long time ago i used to have it set up wirelesly to the internet via a D-link DCF-650 W cf card. But i can't get it to find and wireless connects. The card lights aren't flashing there just on they used to flash when I would send or receive data. I can hook to internet through my computer but i want it wireless. I found some drivers for card that i installed through win7 on computer, but how do i make it install to my pocket pc where the card is at?
View 2 Replies View RelatedBoth my usb ports broke. is thr an express card for my machine? emachine e627
View 1 Replies View RelatedCan I make a antenna to plug into my wifi card?
View 1 Replies View RelatedCan I make my old XPS 210 wireless internet with either a card or an adapter? If so, which ones.
View 1 Replies View RelatedI'm going to be moving into a place in the next couple months where I'll have to go wireless on my desktop (until now I've just done Ethernet so I don't even have a wifi card on my desktop). The router/modem aren't anywhere near my bedroom so my gear will be going wireless from now on All my devices are built-in wifi ready but not my desktop.
I would like recommendations as to a rock-solid, reliable, fast and well performing card as I can to make up for no hardwired connection. Especially with BF3 coming out I'm not all that thrilled with being forced into this situation but you gotta do what you gotta do. Anyhow, I'll be bringing my router (Netgear WNDR3700) so I'll have the range and speed from there about as good as I can get, so I'd like a card of equal merit.
One side note...probably not really feasible considering I want speed and performance as a priority, but I would love a card (if possible) without bullshit antennas sticking out of the case, or with external antennas you have to set up on your desk. I will go that route if I have to but man that is an aesthetic nightmare, IMO. The ones that stick out of the back of the case are the worst looking for me just as a caveat.
Have just acquired new used HP desktop running Windows Vista. System has a Broadcom NeXtreme Gigabit Ethernet card installed, which gets me to the internet OK when using a LAN cable from wireless router. But I can't make wireless connection. Vista tells me that I need a wireless network adapter.Am I missing something? Is it possible to change some settings to get the Broadcom card to go wireless? If not, what sort of adapter is needed, and is such adapter external or will it have to be installed in the system box?
View 3 Replies View RelatedI think I am having problem with my network card I am running windows 7 with Dell wireless 1390 WLAN Mini-Card lots of times the signal is low and I get the error message no internet connectivity or some other error message that I am not being able to connect to the network provided by my wimax modem, Is there any program that I can download to test if there are any errors related to the network card or any way to fix this?
View 3 Replies View RelatedI try to make Nat on a stick, but not successful.
Network Diagram
Config File
interface Loopback0ip address 10.0.1.1 255.255.255.252ip nat outsideip virtual-reassembly!!
interface FastEthernet0!!interface FastEthernet1!!interface FastEthernet2!!interface FastEthernet3!!interface FastEthernet4ip address 60.160.60.138 255.255.255.248
[Code].....
i have an ACS Appliance 5.x but the LMS 4.2 doesn't;t recognize it as Cisco device , and give him the sign ? how to make LMS 4.2 recognize it as acs
View 3 Replies View RelatedI have a problem with a L2L VPN between ASA and Checkpoint R71 VPN I can ping it up to the network that is behind the checkpoint but they can not make me pin.
View 3 Replies View RelatedThis is the third series 300 switch I've configured, but have not run across this issue before. I've attached to the switch via the console port and even tried with the web interface but get the same results. Upon booting the switch asks for the default user ID and password, then it prompts to change the password. I do this and then go to configure the device with the new IP address, add a new user ID and password and VLAN. All changes seem to save as I get no errors. However, when the device is rebooted, all changes are lost. I've even went so far as to delete the startup-config file but still no luck. Version information is as follows:
SW Version: 1.0.0.27 (Date: 28-Apr-2010, Time: 13:33:55)
Boot Version: 1.0.0.4 (Date: 08-Apr-2010, Time: 16:37:57)
HW Version: V01
according to this document I do port translation through CLI and I have following config:
View 4 Replies View Related I have a ASA5505 in a branch connected to the head office via L2L-VPN. The clients at the inside of the ASA can use the DNS servers in the head office through the VPN tunnel. The ASA is configured to use these DNS servers, too.
dns domain-lookup outsidedns domain-lookup ADMdns domain-lookup insidedns server-group DefaultDNS name-server 172.17.6.225 name-server 172.17.6.227 domain-name some.name management-access ADM
The VPN ist connecting the networks behind interfaces inside and ADM to the network at the head office.
When the ASA is resolving a hostname it tires to use these servers. But it does via outside interface.
gw700# ping heise.deMar 30 2011 07:58:49: %ASA-6-302015: Built outbound UDP connection 35360 for outside:172.17.6.225/53 (172.17.6.225/53) to identity:117.135.114.78/2117 (117.135.114.78/2117)DNS: get global group DefaultDNS
[Code].....
how can i make my PC as public IP? do i need to wrt som servlet program 4 it?and how to mak my mobile as public IP by setting its domain?
View 1 Replies View RelatedMy PC is connected to a wired network in the office. I have a 802.11g USB device. I want to hook the device to my PC's USB and make it an access point for the wifi enabled devices i.e. cellphones and laptops in the department so they can use the internet. The PC has Windows 7 installed.
View 3 Replies View RelatedBuy 24port Network Switch connect all 20 computer to it using LAN wire configure the IP Address & Sub mask individually to each computer (Rem: # every IP Address should be similar in first 3rd Quads & 4th Quad should be UNIQUE i.e, 192.168.0.1 then 192.168.0.2 and so on to 192.168.0.20) then input Subnet Mask as 255.255.255.0.Apply & Restart every computer inividually.
View 2 Replies View RelatedI am completing a project as part of my 2nd year studies and I am at the stage of testing on the network but before I go ahead with this stage, I would like some feedback on what I could do to make my network more efficient and secure.passwords are: ciscothe link is the packet tracer file I am working on.url
View 6 Replies View RelatedI'm configuring an 1140 and trying to make it invisable to any user that doesnt know the SSID. The SSID is not broadcast, however my clients see "Other Network" in their list of available networks. Short of turning off the AP is there any way through the 1140's configuration to prevent this "Other Network" from showing up in the clients available networks list.
View 2 Replies View Relatedi just managed to config the Cisco 877 and send it to my client,when the client connect the router from his location the router can't make VPN connection to my HQ office,i can connect to the router using the external IP adress,i tried to reset the VPN tunnel but no avail,
View 3 Replies View RelatedOur 871 no longer allows us to make changes to it. I was told the contract ran out, so I renewed it and Cisco support then added the contract to my serial number. What now? Is there a step required to have the router check in with Cisco so that it becomes "unlocked" for me to make changes?
View 1 Replies View Relatedi have linksys modem which already working for different v lans then for lab we take other switch 3750 switch and created different v lans. v lans are working fine but we need internet for different v lans for that linksys modem how we can make interface V lan1/
ip address 10.1.1.10 255.255.255.0
ip default- gateway 10.1.1.1
no sh
interface Vlan10
ip address 10.1.2.1 255.255.255.0
no ip route-cache
!!interface Vlan20
ip address 10.1.3.1 255.255.255.0
ip route 0.0.0.0 0.0.0.0 10.1.1.1
ip dhcp pool vlan10
network 10.1.2.0 255.255.255.0
default-router 10.1.2.1
dns-server 10.1.1.1
!
!ip dhcp pool vlan20 network 10.1.3.0 255.255.255.0 default-router 10.1.3.1 dns-server 10.1.1.1
When I'm trying to make backup in ACS5.1(in log collector node) it gives me the following error:
FullBackupOnDemand-Job Incremental Backup Utility System Wed Jul 13 16:50:23 EEST 2011 Incremental Backup Failed: CARS_APP_BACKUP_FAILED : -404 : Application backup error Failed,I did it via Monitoring Configuration -> System Operation -> Removal and Backup and then "Backup now" bottom.
I tried to restart ACS services through cli (application stop/start) and different repositories (ftp, tftp) but without success.
We've got vpn-concentrator and 15 offices with 881w and 1941 isr connected vo it via ipsec. Our Asterisk is placed behind this vpn-concentrator in local network, so all traffice goes throung vpn tunnels. Is it possible to make QoS rules using just destination IP address of our Asterisk server?
View 7 Replies View Relatedi have Cisco 1941(with security lic) and i have been asked to make a VPN with public IP addresses so there will be no info about internal networks. Other side has ASA 5520 and they provided me with 2 public IP addresses. i have done many different VPNs but this is first with public IP addresses and i cannot figure it out.So here is the question:
1. How to do it ? (maybe some example)
2. Do i need two public IPs to do it ?
I have RV042 Router, I'm using only one Internet conection, I'm using IP group like this 192.168.95.x, my DHCP setting use 192.168.95.120 to 192.168.95.240, but in this time I have 245 workstations (may be I will have 25 additionals workstations) and some times I see IP conflict message in my current work stations.
I had read about SUBNET like response about my problem, but I'm not sure about that and how to make subnet with my RV042.
i have a 5510 with SDM 8.2.5 from clients connected to LAN i cant open a VPN connection! (using windows client L2TP or PPTP) there is not rules tho block this ports, why i cant connect?
my configuration:
FIREWALLP01# show running-config
: Saved
:
ASA Version 8.2(5)
!
hostname FIREWALLP01
domain-name MAIOR.local
enable password 28kg/dOQX80WtMHA encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
[code]....
I have a rare case. switch 6500 make crash and go to rommon. when review the crash appear that the switch charge the configuration from nvram, but, at the ending there are a few line command, that make the switch go to crash.. then I have to booting from rommon and start again. I use the version 12.2.33.sxi9 and 12.2.sxi3 and the configregister is 0x2102
I think that the switch get the startup-config file from other file-system.
*Sep 1 03:42:42.352 Inviern: %SYS-5-CONFIG_I: Configured from memory by console
access-list 199 permit icmp host 10.10.10.10 host 20.20.20.20
crypto map NiStTeSt1 10 ipsec-manual
match address 199
set peer 20.20.20.20
exit
no access-list 199
no crypto map NiStTeSt1
*Sep 1 03:42:46.952 Inviern: %SYS-5-RESTART: System restarted.
Customer has a WLC 4402 and 21 AP's LAP1131AG, there is a PDA wlan created to give PDA's and wireless Phones access to the webmail. This is done by access lists and firewalls. Now the customer wants more access to the internet in this PDA wlan, maybe in a later phase to the other vlans, can we use an ISE server and make profiles, is this the only additional server that we need or is an upgrade of the WLC and ÄP's also needed.
View 1 Replies View RelatedWhen I'm trying to make backup in ACS5.1(in log collector node) it gives me the following error:
FullBackupOnDemand-Job Incremental Backup Utility System Wed Jul 13 16:50:23 EEST 2011 Incremental Backup Failed: CARS_APP_BACKUP_FAILED : -404 : Application backup error Failed
I did it via Monitoring Configuration -> System Operation -> Removal and Backup and then "Backup now" bottom.
I tried to restart ACS services through cli (application stop/start) and different repositories (ftp, tftp) but without succes.
i have router 3845 and then it's connected with pix and then its connected with vpn tunnel to the customer router. i am here trying to make vpn connectivity for devices. so on router i did static nat statements 10.124.90.124 10.200.200.1. this type of six statements i wrote for six devices. on the pix i did
isakmp key ******** address 208.39.107.230 netmask 255.255.255.255
isakmp policy 30 authentication pre-share
isakmp policy 30 encryption 3des
isakmp policy 30 hash md5
isakmp policy 30 group 2
isakmp policy 30 lifetime 86400
crypto map outside_map 60 ipsec-isakmp
crypto map outside_map 60 match address outside_cryptomap_60
crypto map outside_map 60 set peer 208.39.107.230
crypto map outside_map 60 set transform-set ESP-3DES-SHA-1
i have one question that i need to use physical subnet or nat subnet for crypto map acl? and also on the customer router which subnet they can use as well nat sunet or my router physical subnet?
I wonder if i can make a stack with 3 SG500-28.
View 1 Replies View RelatedI have a cisco ASA 5540 and i cant make a simple PAT (many private IP to one public IP). Below you can find my conf.
[code]...
