I am completing a project as part of my 2nd year studies and I am at the stage of testing on the network but before I go ahead with this stage, I would like some feedback on what I could do to make my network more efficient and secure.passwords are: ciscothe link is the packet tracer file I am working on.url
View 6 RepliesRegion : Argentina
Model : TL-MR3220
Hardware Version : V2
Firmware Version :
ISP :
Region : UnitedStates
Model : TL-MR3220
Hardware Version : Not Clear
Firmware Version :
ISP : None
I'm a court reporter trying to set up a connection between my laptop and my court reporting machine, which has built in wifi capabilities. My court house has public wifi but there is always some interference which causes transmission between my laptop and machine to freeze. I was told I could create my "own wifi" between my machine and laptop if i bought a router. is this possible with this hardware?I don't need the internet or want an internet connection. I have the internal modem in my laptop. I just want to provide a connection between my laptop and writing machine wirelessly. That is, data being sent back and forth between the two. (Like your headset and smartphone connected with Buetooth). I can use the Bluetooth method to connect the two, but I opted for wireless connection because Bluetooth still can have some interference when attorneys come in the courthouse building with a Blackberry smartphone. I heard this router will provide a secured, private wifi connection between my laptop and machine.It doesn't say anywhere in the instructions that how to do this or I just don't know which method to use this router for what I want to do. Is it WISP, AP or BRIDGE, etc...?
i now learning about SSLVPN, and i already install license in 1941 with SSL and security9 License, i learning how to make a gateway for SSLVPN full tunnel, but i meet an obstacles, when i go to my wan ip address https://wan ip address, the browser give this
SSL connection error Unable to make a secure connection to the server. This may be a problem with the server, or it may be requiring a client authentication certificate that you don't have.
Error 107 (net::ERR_SSL_PROTOCOL_ERROR): SSL protocol error
[code]...
I have been using a Dell desktop for many years now as my primary computer. Recently I received a brand new Sony VAIO laptop. So as to make the laptop connect to the internet wirelessly, I hooked up a Linksys router (Linksys model # BEFSR41) and a Linksys access point (Linksys model # WAP200). Everything is working flawlessly except for one big problem. My network is listed as "unsecure". What steps do I have to take to make my network "secure"? The operating software in the laptop is Windows Vista. How to make my network secure. Let me just mention that the laptop and desktop are home computers and are both primarily used for "fun and leisure". No business "stuff"
View 9 Replies View RelatedPassword would not work, had to reset to factor. How do I make a new password and secure it again? WRT5462
View 4 Replies View RelatedHaving just installed the E1000 why have I got a public network address '####' which is security type WPA2 -PSK and also public network address '#### - Guest' which is security type - unsecured.Anyone can log onto either wireless network connection but only with the correct password.How do I remove the '####' address and also how do I make the '#### - Guest' address a secure one.
View 1 Replies View RelatedHere is the current logical routing path of the network I've inherited:ISP_ASA_1800 --- P2P link_ LAN, However, the equipment is setup up in this inefficient physical topology: Internet_ASA_LAN switch --- 1800 --- P2P link_LAN, The 1800 is the default gateway for all LAN hosts. This means that all traffic not destined for the LAN goes first to the 1800 which has routes for the Internet and for the P2P. If traffic is destined for the P2P, this is no problem. If traffic is destined for the internet, then in my opinion this is an inefficient routing path because the traffic ends up doing this:LAN host > switch > 1800 > back to the same switch > ASA > Internet, So I am thinking of setting up the physical topology to match the logical topology like this:Internet, ASA_1800 ---- P2P link_LAN switch_LAN hosts This means I will connect the 1800 and ASA directly to one another. Am I on the right track? Is this the best way?
View 4 Replies View RelatedWhat is the best way to add more ethernet ports to my router? Is it to daisy chain a hub /switch to it? I'm all out and I often work on many computers at a time. Currently I have the cable modem, my computer, printer, one spare for computers I work on, and one to vonage modem. I would like more available for computers that I work on so I can hook up at least one more.
View 5 Replies View RelatedThis is just a general question... is there a good way to organize the ASA's access rule list to increase its efficiency? Maybe by service or hit count (Top 10). I am using the Cisco ASDM 6.2 to manage our ASA 5520.
Looking at it looks very unappealing and I'm in the process of adding names and descriptions to all the Network Objects.
Looking for the most efficient setup of my home network. I recently bought the netgear 3700 and it has been great. I also have a trendnet green 8 port giga switch. Both of these will be located in my equipment closet.
I also have an ooma voip hub. before i did the router upgrade i had modem>ooma hub>router. Mainly had it that way since the previous router was a wrg614 and i thought the hub probably had better qos routing. I now have the 3700 infront since i think it does that. I need to learn how to setup the qos though. Problem is that having the hub after the router loses one of my 11 ports (i have pleanty now).
Will speed through the switch be as fast as straight from the router? should my netflix devices connect directly to the router or does any of this matter. [code]
When setting up my e1000 router for a secure domain it automatically opened a non secure one that my neighbors are using. How can I cancel it?
View 2 Replies View Relatedhow do I secure my wireless internet connection?
View 2 Replies View RelatedMy laptop said there is a conflicting IP address. I should be the only computer on my network. How do I secure my laptop and wireless internet so no one else can hack into it?
View 1 Replies View RelatedWould like to set up a secure internet conection and I found out that can be done though the D link, but not sure how to do it free.
View 1 Replies View RelatedI am about to re-install Windows ME on an old Dell Dimension 4300. The computer is connected to the internet via a 2Wire 3600HGV DSL modem/router.
Do I need a software firewall? Or is the router sufficient? Is antivirus software necessary if I don't download anything? It will be part of a local LAN, so I don't want to jeopardize any of the other PCs on the home network.
NOTE: I'm looking to run some older (non-DOS) computer games that don't run well (or at all) on XP and newer systems.
NOTE 2: When I say 'secure', I'm not looking to actively browse the web on the machine. I was curious as to what risks I be facing if I simply had this PC connected to my local network (and thus the internet).
Wanted to know how i could make my usb internet dongle into a wifi device, so that i could use the same usb internet connection on other devices VIA Wifi
View 3 Replies View RelatedI want to know that how to make a usb internet through dsl connection.
View 3 Replies View RelatedImagine MPLS network. Total of 4 sites.
HQ-HUB is the only site with access to the Internet.
So if Site1 or Site2 or Site3 need to access the Internet, traffic will have to go through HQ-HUB and from there reach the Internet.I have routes 2851's on the spoke sites. Which command or mechanism you would explore in this case to make the spoke sites point to the HQ-HUB to reach the Internet?
Would you do this based on DNS settings or getting an access-list & static route defining when the spoke routers traffic need to go the internet, point to the HUB-HQ as the default?
I have a Motorola Affix and am using the app printershare to print from my phone to a network printer at home.. it works great.. but I want to know if there is a way to make the printer accesable from the internet so I can print from pt phone when im not home and connected to the network...accessible
View 2 Replies View RelatedI am connected to the internet, but the only thing that I am able to connect to are TeamSpeak servers, Avast Updater and Window Updater. No browsers or other types of software can make connections.
View 3 Replies View Relatedhow can i make a 2 km wirless network for dsl internet. my friend lives 2 km far from my home,he has a dsl connection.but there is no facility of dsl availble to my side.how can we make a wireless network?
View 3 Replies View RelatedI am using my LAN Connection for file sharing and internet on my Office Pc (Windows XP). I have a wireless external adapter (Alfa) which I use for WAN Connection. But my PC doesn't use the internet from WAN Connection till I disconnect the LAN Cable. I want to use LAN Connection for file sharing and database in the office only and Internet on WAN Connection.
how can I make the WAN Connection as default and to guide the OS to use this while the LAN Cable is still plugged in. I am using AVG Internet Security 2011 & it's firewall.
How to make my internet connection becomes faster?
View 5 Replies View RelatedWould it be possible to make a printer accessible from internet? Need to print a lot of batch printing from my cloud application , in that case can we direct this print job to a specific printer over internet ?
View 1 Replies View RelatedMy Internet is very slow, It makes me impatient, I can't stand waiting and I'm afraid to do some stupid clicks.
View 4 Replies View RelatedIt seems like my internet connection constantly disconnects and I have to restart my computer to get it to work again. I don't think its the internet connection because I've lived in 4 different apartments and this has happened. I'm having to restart my computer at least 4 times a day.Another thing I wanted to add is that it especially happens when I do something that is 'internet intensive' such as youtube or when I am using skype or msn video call.
View 1 Replies View RelatedI dont know how to set this Netgear router to make my internet wireless
View 1 Replies View RelatedFirst of all, is there a document on the SG300 that explains everything in plain english?Here is what I am trying to do...I have a Charter Communications connection to the internet through their modem.This modem has a static IP.I would like to make this internet connection the source for the SG300 and all the other ports be DHCP.I was told when I purchased it that being a layer 3 device.
View 3 Replies View RelatedWhen I try and connect to the Internet, it doesn't connect. Windows Network Diagnostics give me this message:"There might be a problem with one or more network adapters on this computer- The network adapter "Realtek RTL8102E/8103E Family PCI-E FE NIC" is experiencing driver or hardware related issues- Make sure your Internet Protocol Bindings are correct. Also, I took a look at my Device Manager and there seems to be a problem with almost every one of them.
View 1 Replies View Related-I have a 10 mbps subscription.
-I use a router and connect two pcs on it,they use internet at the same time.
Q:will the speed be 5mbps on each computer? if so,is there a way to make it 10mbps each while they are both using the internet at the same time?
I'm currently switching from a certain internet provider to another and I'm forced to get another router. What I wanted to do is since the initial router has to be on the first floor, I'd like to have the second one on the top floor closer to my computer whereas they would share a dedicated connection between each other wirelessly so it would make my connection faster rather than just having my pc connect directly wirelessly to the initial router on the first floor. Is that possible?
View 4 Replies View RelatedMy question is how can i turn this adapter that i get internet from for my desktop INTO wifi so i can use my tablet?right now the desktop is the only computer with internet since it has an adapter.what do i need to make a WIFI signal from the computer? is there a usb stick or router i can buy?
View 2 Replies View RelatedCan I make my old XPS 210 wireless internet with either a card or an adapter? If so, which ones.
View 1 Replies View Related