-I have a 10 mbps subscription.
-I use a router and connect two pcs on it,they use internet at the same time.
Q:will the speed be 5mbps on each computer? if so,is there a way to make it 10mbps each while they are both using the internet at the same time?
how can I configure a Catalyst 3750, which interface is patched on the ISP router (internet uplink bandwidth = 20Mbps with) to allow all active users are sharing the bandwidth (either 5, 50, 100, user simultaneously..in internet surfing. right now it's like when a user starts a larger download that it uses the bulk of the bandwidth, and other users can reach all remaining extremely slow access times.
View 3 Replies View RelatedIm currently experiencing an intermittent connection on my office and we just upgraded from 4Mbps to 10Mbps. Latency is high when pinging commercial website like yahoo.com,it shoots up to 200sec. ISP router is connected to two HP Procurve Switch, then the workstation and servers. Already did a router/modem test and it failed, I advise our ISP to change the router but it were still experiencing the same problem. Network drop is also experience even after office hours, eventhough only few workstations are working.
View 1 Replies View RelatedI have two Catalyst 3560 series switches with a 100Mb Ethernet microwave link and a 250Mb Ethernet microwave link between them. Can the switches be set up to make full use of the added bandwidth (350 Mb).
View 3 Replies View RelatedI have a desktop and a laptop each using xp. Each is set up to connect to the internet wirelessly, through different networks. I do not wish to disturb those settings.I want to set up a third, ethernet network, linking the desktop and laptop, for file sharing only, no internet.
View 11 Replies View RelatedI want to transfer a few larges files from my mom's laptop to my laptop.
I brought my laptop to her house and connected to the network (her laptop is connected to Comcast through a Linksys WRT54GL router)
I made sure that network discovery, file and printer sharing, and public folder sharing is turned on for both Home/Work and Public Networks on BOTH computers. I then shared her "Downloads" folder with EVERYONE for read and write. I then located her laptop on the Network in Windows Explorer, and tried opening the Downloads folder but it won't let me, says I don't have permission.
What is the deal with this? This would have worked 100% with WinXP.
I then tried disabling Firewalls, rechecked all the settings, and then I even setup a homegroup and joined the homegroup. I saw her computer on the homegroup, double clicked it, saw the Downloads folder, double clicked it - SAME ERROR.
All I want to do is transfer a few files from her laptop to mine, why does Windows7 make this impossible?? I am so frustrated!
I then tried sharing a folder on my laptop and tried accessing it on her computer, SAME problem. What do I do now? I'm ready to uninstall Windows7 and reinstall WindowsXP, this is BS!
I have installed ASA 5520 firewall and 1841 Cisco router. firewall is connected to internet and the router. Router is connected to Network. There two networks available. I have completed the configuration. but problems. i dont know how to do the bandwith sharing for these networks.
View 2 Replies View RelatedI have a curious issue on a customer site where the above components are installed.The issue being that the iPhones the users utilise cannot connect to the mail server via WiFi, they are forced to connect with their 3G connection. The core issue seems to be the 887VA, as when I've installed 'lesser' branded ADSL routers, the connection seems to be fine.The iPhones are set to access the mail server via the URL: mail.customer.com. Should I change this to the internal IP of the server 192.168.12.200, the mail connection works fine. However I cannot expect the client to make this change every time they arrive or leave the office. Presently I have them disable WiFi when on premises.
View 1 Replies View RelatedWhen someone downloads a file, or similar, there seems to be no, or very little, room for other requests. I've even tried to be the only one on the network, start a download (from ex. Intel) and then tries to access a simple website, almost only text, and its extreemly slow. I hav ethe latest firmware, a windows domain network and the routers is not acting as dhcp server.
View 4 Replies View RelatedI need very Urgent Time based Bandwidth limit on subinterface in Cisco 3845 Router.At Present 3Mb input/output rate-limit of our one of the client now they need between 9:00 to 20:59 3 Mb and between 21:00 to 8:59 they need 9 Mb bandwidth, please see current b/w limit config of our client in my router subinterface.
interface GigabitEthernet0/1.12
description *** xyz ***
encapsulation dot1Q 12
ip address 10.11.12.13 255.255.255.248
rate-limit input 3072000 576000 1152000 conform-action transmit exceed-action drop
rate-limit output 3072000 576000 1152000 conform-action transmit exceed-action drop
Now how can i achive of my requrement to time based b/w limit.
the shared resource was not created at this time
View 1 Replies View RelatedI try to connect my LinkSys wrt320n with Apple Time Capsule with mode "sahring existing wireless network" and so Time capsule doesn't work. It gets IP, but writes "isn't internet connection, WiFi network don't find" and also in the admipage of my wrt320 I can't see Time Capsule as client.
View 4 Replies View RelatedI had tried to connect my internet using a 10/100 standard Ethernet card but my net connection was fluctuating. My Brother who is a network engineer told me to switch back to 10 mbps from 100 mbps full duplex and he prayed if that might work. Luckily enough it worked and solved my purpose of delivering uninterrupted net connection.
View 1 Replies View RelatedThe Setup On my home network, I am running Windows Server 2003 as domain controller and file server with a SCSi attached disk array.I have several client PC's. 2 running Windows XP service pack 3, 1 laptop running Windows 7 Service pack 1 and a desktop also running Windows 7 Service Pack 1.These are connected by 2 switches - 1 x Netgear gigabit switch, and a Linksys PSUS4 USB Print server at 100mbps.The PC I use the most is the desktop running Win7 and transfer files to the server.After transferring some large files from the clients to the server, I noticed that the speed was considerably slower than what I was expecting it to be. After investigating, and eliminating elements of the network, I discovered that the Server NIC was running at 10mbps. I tried the usual things like forcing the NIC to run at 100mbps Full Duplex but this had no effect. Strangely, if I reboot the server while the desktop is still switched on the connection goes back to 100mbps. However if I reboot the desktop, or even alter the network settings, it immediatley reverts back to 10mbps.
View 17 Replies View Relatednyway, I've had an internet connection set up at my house for quite some time, and recently I have noticed that my online games have begun to lag. And I know it is not due to my hardware, it is online-lag, like jumping, and almost teleporting to places. I play games like Battlefield 2, Battlefield 2142, Battlefield 2: Project Reality, and more.I have a 10mbps download and 1mbps upload, so that is an optimum speed for playing games like this, I know. And the connection is split between 3 computers in my home. (1 desktop and 2 laptops, all connecting wirelessely)I have all the modem, and router set up properly.. I just don't understand why I am having this lagging problem. If someone could explain it to me,
View 4 Replies View RelatedBeen wondering what would make a LAN only run on 10mbps. I recently experienced this on two clients sites. It won't just connect when I configure the LAN to run on 100mbps. Only connects on 10mbps. What could be responsible for this? Won't this affect the performance of ones application?
View 5 Replies View RelatedMy LAN speed was 100 Mbps but now it is 10 Mbps and too slow when I am using internet. So how can i increase the speed to 100 Mbps from 10Mbps?
View 2 Replies View RelatedTech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Ultimate, 64 bit
Processor: Intel(R) Core(TM) i5-3570K CPU @ 3.40GHz, Intel64 Family 6 Model 58 Stepping 9
Processor Count: 4
RAM: 4060 Mb
Graphics Card: ATI Radeon HD 5670, 1024 Mb
Hard Drives: C: Total - 426837 MB, Free - 258482 MB; D: Total - 49998 MB, Free - 49015 MB; G: Total - 476937 MB, Free - 175903 MB; J: Total - 12071 MB, Free - 7763 MB; T: Total - 102397 MB, Free - 64670 MB;
Motherboard: ECS, Z77H2-A3
I have been paying Time Warner Cable for 50mbps download, but have been getting just under 10mbps for quite some time (ethernet,NOT wireless, we have no wireless-capable devices) After hours on the phone with Tier 3 tech support, two visits from technicians, a replaced modem and countless hours googling, I am at my wits end.When I go into the Task Manager and look at Networking, it shows the Link Speed at 10 Mbps.I have gone into my network adapter settings and set the Speed/Duplex to 100mbps Full, as the TWC rep said.Also switched cables, powercycled, rebooted the PC, etc.Google searches suggest going into the router settings and raising the cap through there, but I can't find the proper setting for my device (Motorola SURFboard SBG6580) if they even exist at all. it's using slightly outdated firmware ( SBG6580-3.3.1.0-GA-09-058-NOSH ) and that that could be causing the problem.
So I'm on the 100mbps virgin fibre optic broadband, and for the past couple of days, every now and again my speed drops drastically. It's not the Internet, because I've tested it on my laptop both wireless and plugged in. Even my phone and iPad are getting higher speed.
When I first got the internet(About a week ago) my download speed was 100+ mbps, but now my Link speed is constantly at 10mbps, even if I set my NIC to 1gbps full duplex, I've tried disabling and re enabling, I've tried uninstalling and reinstalling drivers, updating drivers. Restarting the router, starting it in Modem mode.
I've been trying to find a response or a fix to this issue for a few weeks now.My DIR-655 RevB router is currently at firmware 2.07NA, and has speeds of around 30Mbps down and 10Mbps up when connected directly through wired connections.However over wifi, I am only getting around about 5 Mbps down and 2 Mbps up. I've tried the 'usual' fixes suggested on here, change broadcast signal to manual, not auto, shutting of QoS shaping, all of that. However nothing seems to be improving the speed.
View 8 Replies View RelatedI have used DIR-655 (HW:B1 FIRM: 2.00NA) with Motorola SB6120 for sometime without any incidents. My dl speed usually is around 26mbps. Lately, it happens twice that the dl speed drop to 10mbps. If I connect the SB6120 directly to my PC, the dl speed is 30mbps. Is my DIR-655 dead?
View 8 Replies View RelatedI have a 9-year old PPPoE DSL modem at home whose ethernet port is only 10mbps. For some reason I am unable to establish PPPoE connection on my E1000 when connected to this modem (PPPoE login is correct, as it works with a different router when connected to the same modem). Someone suggested that the problem may be that the DSL modem is unable to negotiate Ethernet connection because E1000's WAN port is 10/100mbps (autosensing failing?). The suggestion was to manually set the router's WAN port to 10mbps. Is there such a switch somewhere on the E1000 - I cannot find it in web admin console anywhere?
Any other guesses as to why the router and the modem cannot connect?
FWIW, the dsl modem is a SpeedStream 5360 E1000 hardware v 2.1; firmware 2.1.02
tell me if cisco 1921 onboard GigabitEthernets can reach 10Mbps with concurrent services, one GigabitEthernet interface as WAN interface, the other one as LAN interface.
View 2 Replies View RelatedWanted to know how i could make my usb internet dongle into a wifi device, so that i could use the same usb internet connection on other devices VIA Wifi
View 3 Replies View RelatedI want to know that how to make a usb internet through dsl connection.
View 3 Replies View RelatedI have a Motorola Affix and am using the app printershare to print from my phone to a network printer at home.. it works great.. but I want to know if there is a way to make the printer accesable from the internet so I can print from pt phone when im not home and connected to the network...accessible
View 2 Replies View RelatedI am connected to the internet, but the only thing that I am able to connect to are TeamSpeak servers, Avast Updater and Window Updater. No browsers or other types of software can make connections.
View 3 Replies View Relatedhow can i make a 2 km wirless network for dsl internet. my friend lives 2 km far from my home,he has a dsl connection.but there is no facility of dsl availble to my side.how can we make a wireless network?
View 3 Replies View RelatedI am using my LAN Connection for file sharing and internet on my Office Pc (Windows XP). I have a wireless external adapter (Alfa) which I use for WAN Connection. But my PC doesn't use the internet from WAN Connection till I disconnect the LAN Cable. I want to use LAN Connection for file sharing and database in the office only and Internet on WAN Connection.
how can I make the WAN Connection as default and to guide the OS to use this while the LAN Cable is still plugged in. I am using AVG Internet Security 2011 & it's firewall.
How to make my internet connection becomes faster?
View 5 Replies View RelatedWould it be possible to make a printer accessible from internet? Need to print a lot of batch printing from my cloud application , in that case can we direct this print job to a specific printer over internet ?
View 1 Replies View RelatedMy Internet is very slow, It makes me impatient, I can't stand waiting and I'm afraid to do some stupid clicks.
View 4 Replies View RelatedI am completing a project as part of my 2nd year studies and I am at the stage of testing on the network but before I go ahead with this stage, I would like some feedback on what I could do to make my network more efficient and secure.passwords are: ciscothe link is the packet tracer file I am working on.url
View 6 Replies View Related