Increasing LAN Speed Form 10Mbps To 100Mbps?
Aug 15, 2011My LAN speed was 100 Mbps but now it is 10 Mbps and too slow when I am using internet. So how can i increase the speed to 100 Mbps from 10Mbps?
View 2 Replies
ADVERTISEMENT
Network Speed Stuck At 10mbps
Mar 20, 2011The Setup On my home network, I am running Windows Server 2003 as domain controller and file server with a SCSi attached disk array.I have several client PC's. 2 running Windows XP service pack 3, 1 laptop running Windows 7 Service pack 1 and a desktop also running Windows 7 Service Pack 1.These are connected by 2 switches - 1 x Netgear gigabit switch, and a Linksys PSUS4 USB Print server at 100mbps.The PC I use the most is the desktop running Win7 and transfer files to the server.After transferring some large files from the clients to the server, I noticed that the speed was considerably slower than what I was expecting it to be. After investigating, and eliminating elements of the network, I discovered that the Server NIC was running at 10mbps. I tried the usual things like forcing the NIC to run at 100mbps Full Duplex but this had no effect. Strangely, if I reboot the server while the desktop is still switched on the connection goes back to 100mbps. However if I reboot the desktop, or even alter the network settings, it immediatley reverts back to 10mbps.
View 17 Replies View RelatedDownload Speed Capped At 10mbps / How To Raise To 100
Feb 17, 2013Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Ultimate, 64 bit
Processor: Intel(R) Core(TM) i5-3570K CPU @ 3.40GHz, Intel64 Family 6 Model 58 Stepping 9
Processor Count: 4
RAM: 4060 Mb
Graphics Card: ATI Radeon HD 5670, 1024 Mb
Hard Drives: C: Total - 426837 MB, Free - 258482 MB; D: Total - 49998 MB, Free - 49015 MB; G: Total - 476937 MB, Free - 175903 MB; J: Total - 12071 MB, Free - 7763 MB; T: Total - 102397 MB, Free - 64670 MB;
Motherboard: ECS, Z77H2-A3
I have been paying Time Warner Cable for 50mbps download, but have been getting just under 10mbps for quite some time (ethernet,NOT wireless, we have no wireless-capable devices) After hours on the phone with Tier 3 tech support, two visits from technicians, a replaced modem and countless hours googling, I am at my wits end.When I go into the Task Manager and look at Networking, it shows the Link Speed at 10 Mbps.I have gone into my network adapter settings and set the Speed/Duplex to 100mbps Full, as the TWC rep said.Also switched cables, powercycled, rebooted the PC, etc.Google searches suggest going into the router settings and raising the cap through there, but I can't find the proper setting for my device (Motorola SURFboard SBG6580) if they even exist at all. it's using slightly outdated firmware ( SBG6580-3.3.1.0-GA-09-058-NOSH ) and that that could be causing the problem.
Link Speed Set To 10mbps - Doesn't Change
Mar 9, 2013So I'm on the 100mbps virgin fibre optic broadband, and for the past couple of days, every now and again my speed drops drastically. It's not the Internet, because I've tested it on my laptop both wireless and plugged in. Even my phone and iPad are getting higher speed.
When I first got the internet(About a week ago) my download speed was 100+ mbps, but now my Link speed is constantly at 10mbps, even if I set my NIC to 1gbps full duplex, I've tried disabling and re enabling, I've tried uninstalling and reinstalling drivers, updating drivers. Restarting the router, starting it in Modem mode.
D-Link DIR-655 :: DL Speed Drop From 26mbps To 10mbps When Connect
Jul 23, 2011I have used DIR-655 (HW:B1 FIRM: 2.00NA) with Motorola SB6120 for sometime without any incidents. My dl speed usually is around 26mbps. Lately, it happens twice that the dl speed drop to 10mbps. If I connect the SB6120 directly to my PC, the dl speed is 30mbps. Is my DIR-655 dead?
View 8 Replies View RelatedIncrease Internet Speed Connection To 100mbps?
Aug 9, 2011how to my increase Internet speed connection 100mbps
View 1 Replies View RelatedHow To Get 100mbps Speed In Wireless Data Card
Apr 27, 2012How to get 100mbps speed in wireless data card
View 1 Replies View RelatedD-Link DIR-615 :: Configuration For Pulling Up 100mbps Speed?
Feb 23, 2012I have Broadband 100 from Shaw Cablesystems (100mbps speed).I can only pull 30mbps with the DIR-615. I have tried exchanging it for another one, same issue.Is there some kind of configuration option I'm missing?
View 14 Replies View RelatedLinksys Wireless Router :: E4200 Speed 300mbps Goes To 100mbps
Jun 25, 2012I think i make big mistake to update E4200 firmware from 1.0.00 to 1.0.04.My ISP speed is 300 then i connect pc.Download Speed: 299.22 mbps (37.4 MB/sec transfer rate)Upload Speed: 267.63 mbps (33.5 MB/sec transfer rate)Then connect E4200 With 1.0.00 firmware speed is ~200.But now firmware is 1.0.04 and speed only 100Download Speed: 103.43 mbps (12.9 MB/sec transfer rate)Upload Speed: 101.88 mbps (12.7 MB/sec transfer rate.
View 9 Replies View RelatedCisco Wireless :: How To Enable 100mbps Speed On WLC 2504 With 3600 AP
Sep 13, 2012i have cisco wlc 2504 connected with cisco 3600 ap,now the customer required n bandwidth speed ,but in wlc am not able to enable n bandwidth for ssid.in radio policy of ssid also n bandwidth is not showing,only this bandwidth showing a/g,g,b/g, and all?
View 8 Replies View RelatedLinksys Wireless Router :: E4200v2 / Increasing The LAN Speed?
Jan 22, 2012i just bought the E4200v2 and configured for my network. the router found the latest firmware and has been updated. i tried multiple configurations/channels etc with no change.basically, coverage is horrible, and even when in the same room as this router copying files from a linux server and a window7 machine is extremly slow.... almost as if its G speed. my mac is showing the transmit rate >108mbps and should be copying at 60,70 even 80 mbps (megabits), but im getting on average ~28mbps however, uploading from my mac to those 2 machines flys. im seeing speeds at 80 to 90 mbps, which is again, what i would expect.
View 3 Replies View RelatedInstall A Form Of Operating System On HDD?
Nov 5, 2012I was wondering if it is possible to install a certain operating system on a network HDD. any possible install a virtual machine or use that as a remote desktop to retrieve on a ipad.
View 1 Replies View RelatedCisco :: Possible To Get Result In Event List In Form Of Graph
Dec 13, 2012Is it possible to get the result in th event list in the form of graph, ie. like delay,throughput in the form of graph
View 3 Replies View RelatedBroadband :: Why Networks At 10mbps And Not 100 Mbps
Jul 31, 2011I had tried to connect my internet using a 10/100 standard Ethernet card but my net connection was fluctuating. My Brother who is a network engineer told me to switch back to 10 mbps from 100 mbps full duplex and he prayed if that might work. Luckily enough it worked and solved my purpose of delivering uninterrupted net connection.
View 1 Replies View RelatedComputer Games Lag On A 10MBPS Connection?
Jun 17, 2011nyway, I've had an internet connection set up at my house for quite some time, and recently I have noticed that my online games have begun to lag. And I know it is not due to my hardware, it is online-lag, like jumping, and almost teleporting to places. I play games like Battlefield 2, Battlefield 2142, Battlefield 2: Project Reality, and more.I have a 10mbps download and 1mbps upload, so that is an optimum speed for playing games like this, I know. And the connection is split between 3 computers in my home. (1 desktop and 2 laptops, all connecting wirelessely)I have all the modem, and router set up properly.. I just don't understand why I am having this lagging problem. If someone could explain it to me,
View 4 Replies View RelatedIntermittent Internet Connection With 10Mbps
Apr 18, 2012Im currently experiencing an intermittent connection on my office and we just upgraded from 4Mbps to 10Mbps. Latency is high when pinging commercial website like yahoo.com,it shoots up to 200sec. ISP router is connected to two HP Procurve Switch, then the workstation and servers. Already did a router/modem test and it failed, I advise our ISP to change the router but it were still experiencing the same problem. Network drop is also experience even after office hours, eventhough only few workstations are working.
View 1 Replies View RelatedHome Network :: LAN Only Connects On 10mbps
Apr 14, 2012Been wondering what would make a LAN only run on 10mbps. I recently experienced this on two clients sites. It won't just connect when I configure the LAN to run on 100mbps. Only connects on 10mbps. What could be responsible for this? Won't this affect the performance of ones application?
View 5 Replies View RelatedLinksys Wireless Router :: WRT120N Just Won't Reset To Original Form
Aug 15, 2009I'm trying to reset this router back to its original form (pass: admin (?)) but the ''hold the reset button for 45 seconds and unplug for 30 seconds'' just doesn't seem to work. When I try to install with the CD it just keeps saying that I have to reset it. how do you reset the WRT120N? Are the lights suppose to blink to indicate that you're done holding the reset bottom?
View 9 Replies View RelatedCisco Switching/Routing :: Nexus 3048 VPC Doesn't Form
Jun 11, 2012I am building up vPC on 2 x Nexus 3048 and found that it did not work properly.The current config as follows,
1. OS: n3000-uk9.5.0.3.U2.2.bin
2. Peer link: 10 x 1G (E1/1 - E1/10) on both devices (I am wondering that 1G interface supports vPC Peer-Link. I heard that upgrading to U3.2 image will work for 1G rather than 10G... )
3. They can ping each other via management IPs
4. Edge switches vPC have not been built yet (I am focusing on Peer-Link and vPC role selection)
[code]....
Cisco WAN :: 6504 Bond Two Connections To Form Single Connection To Double
Nov 1, 2011On our 6504 - 12.2(33)SXH, we currently have a single connection to our ISP (GI1/1) and want to add another connection (GI1/2) Is there a way to bond the two connections to form a single connection (a single pipe) to double the throughput?
View 3 Replies View RelatedCisco Routers :: Setup VPN Form Outside To Use Static Address From Lan Side Of RV082?
Dec 19, 2011I have a RV082.I need to set up a VPN form outside to use a Static address from the Lan side of the RV082.
Lan is 172.16.0.126
Wan is 10.161.48.1
The computer using the VPN will need a virtual IP on the Lan of the RV082 so that it is seen as being on the same network as the equipment on the LAN.
Sharing Bandwidth - Make 10mbps Each When 2 PCs Using Internet At Same Time?
Dec 8, 2011-I have a 10 mbps subscription.
-I use a router and connect two pcs on it,they use internet at the same time.
Q:will the speed be 5mbps on each computer? if so,is there a way to make it 10mbps each while they are both using the internet at the same time?
D-Link DIR-655 :: 10Mbps Up When Connected Directly Through Wired Connections
Nov 11, 2012I've been trying to find a response or a fix to this issue for a few weeks now.My DIR-655 RevB router is currently at firmware 2.07NA, and has speeds of around 30Mbps down and 10Mbps up when connected directly through wired connections.However over wifi, I am only getting around about 5 Mbps down and 2 Mbps up. I've tried the 'usual' fixes suggested on here, change broadcast signal to manual, not auto, shutting of QoS shaping, all of that. However nothing seems to be improving the speed.
View 8 Replies View RelatedLinksys Wireless Router :: E1000 - Limit Wan Port To 10mbps?
Nov 3, 2012I have a 9-year old PPPoE DSL modem at home whose ethernet port is only 10mbps. For some reason I am unable to establish PPPoE connection on my E1000 when connected to this modem (PPPoE login is correct, as it works with a different router when connected to the same modem). Someone suggested that the problem may be that the DSL modem is unable to negotiate Ethernet connection because E1000's WAN port is 10/100mbps (autosensing failing?). The suggestion was to manually set the router's WAN port to 10mbps. Is there such a switch somewhere on the E1000 - I cannot find it in web admin console anywhere?
Any other guesses as to why the router and the modem cannot connect?
FWIW, the dsl modem is a SpeedStream 5360 E1000 hardware v 2.1; firmware 2.1.02
Cisco Switching/Routing :: Enable Multicast On Nexus 7000 Switches In Simplest Form?
Apr 17, 2012We are currently migrating from Cisco 6500 switches to Nexus 7000 switches. I need replicate the following multicast configuration on the 6500 switches in the simplest way so Multicast is functioning on the Nexus 7000 switches.
Cisco 6500 configuration.
ip multicast-routing
interface Vlan8
description
ip address 10.128.46.2 255.255.240.0
[code]....
how we can enable multicast on the Nexus 7000 switches in the simplest form so this will continue operating.
Cisco WAN :: 1921 Onboard GigabitEthernets Can Reach 10Mbps With Concurrent Services
Jan 15, 2013tell me if cisco 1921 onboard GigabitEthernets can reach 10Mbps with concurrent services, one GigabitEthernet interface as WAN interface, the other one as LAN interface.
View 2 Replies View RelatedCisco Firewall :: ASA 5500 / ASDM - View Historical Metrics In Graph Form For Traffic Overview
Sep 25, 2011Running an ASA 5500, and using ASDM to connect. I need to view the historical metrics in graph form for traffic overview, that is shown on the firewall dashboard. I have enabled historical data, but all I see the 5 minute intervals.
View 4 Replies View RelatedLinksys Wireless Router :: E4200 - Block Popup Window That Displays Every Time In Form / Save Settings?
Mar 23, 2012I just installed my new E4200, and am setting the Access Restrictions. Is there anyway to block the popup window that displays every time I enter the form or save the settings?
I'm using IE9 and have tried adjusting the Popup Blocker, but to no avail.
Network Showing 100mbps?
Jun 21, 2011i have gigabit cards on 3 pc linked by a gigabit router but all machine showing connection speed of only 100mbps
View 6 Replies View RelatedOnly Getting 30Mbps From 100Mbps Line?
Dec 26, 2012So i have the virgin 100Mbps package but am only getting about 30 Mbps of this on my computer. I know that we are getting the full speed, as that i have downstairs (directly connected to router) is able to get 100Mbps.The computer that is only getting 30 Mbps is connected to the router (Virgin superhup) through the use of powerline adapters to give me a wired conenction from my room down to the router as we are unable to find a cable long enough to procide a direct connection (without drilling holes through our house and having it hang places)[CODE]
View 6 Replies View RelatedUse 1gbit Converter With A 100Mbps Connection?
Apr 20, 2011Can I use a 1gbit fibre to Ethernet converter with two Cisco 2950 , both 10/100?
View 4 Replies View RelatedHome Network :: Get The Most Out Of New 100mbps Virgin Media?
May 11, 2012Virgin Media just upgraded my broadband to 100mbps. My main PC is in a place where unfortunately I cannot hard wire it to ethernet, and also the wifi signal is a bit rubbish - therefore I have been using D-Link Powerline AV Homeplugs DHP-307 200Mbps (N.B. I am fully aware that 200mbps doesn't really mean that through homeplugs, please read on)
Ages ago when my I first set this up my connection speed from Virgin Media was 50mbps and, after installing, I tested it a few times and got about 45mbps, which I was happy with.
However, due to the upgrade I thought I would test it again, and now I'm only gettin about 20-25Mbps. I did some diagnistic checks as follows:
A laptop plugged directly into my router via ethernet got 97 Mbps My laptop sitting next to my PC connected via wifi got 54 Mbps My PC connected via wifi with the ethernet/homeplug disconnected got 26 Mbps (I think my wireless card in the PC and the aeriel are both a bit rubbish though anyway)My PC connected via ethernet homeplug with no wifi got 23 Mbps
What I don't understand is:
1 - In the configuration utility for the homeplugs it says that the link speed for this plug is 96 Mbps, so how come that's not coming through?
2 - Why would it have one time been higher and now not? If it wasn't for point 1 above I might put it down to interference in the elecrical circuits, but I thought that's what the link speed would be showing me
I guess the best option would be to try and get VM to install a proper ethernet port in my study, however I can't imagine how they would do this without running cables through the house, which I don't want, so I'm trying to exhaust other options. I'm happy to ditch the homeplugs if there is something better.
Connect 10 / 100mbps Media Converter To OC3 Connection?
Feb 9, 2011Can you connect a 10/100mbps media converter to an oc-3 connection?
View 1 Replies View Related
