Cisco WAN :: 3750 Internet Bandwidth Sharing For Every User In Company
Jul 14, 2011
how can I configure a Catalyst 3750, which interface is patched on the ISP router (internet uplink bandwidth = 20Mbps with) to allow all active users are sharing the bandwidth (either 5, 50, 100, user simultaneously..in internet surfing. right now it's like when a user starts a larger download that it uses the bulk of the bandwidth, and other users can reach all remaining extremely slow access times.
View 3 Replies
ADVERTISEMENT
Dec 8, 2011
-I have a 10 mbps subscription.
-I use a router and connect two pcs on it,they use internet at the same time.
Q:will the speed be 5mbps on each computer? if so,is there a way to make it 10mbps each while they are both using the internet at the same time?
View 4 Replies
View Related
Nov 13, 2011
Having worked abroad, will my internet history be visible to IT when I reconnect my laptop to the company network?
View 2 Replies
View Related
May 25, 2013
does the cisco wlc 2504 (software release 7.4) support QoS per-user bandwidth contracts ? I only can see the default QoS profiles (gold, platinum...) i can't see the per-user bandwidth contract to modify it. shoud it be activated ?
View 3 Replies
View Related
Mar 7, 2012
I have installed ASA 5520 firewall and 1841 Cisco router. firewall is connected to internet and the router. Router is connected to Network. There two networks available. I have completed the configuration. but problems. i dont know how to do the bandwith sharing for these networks.
View 2 Replies
View Related
Oct 31, 2011
I have a 20/20 MB circuit and an ASA 5510 and I am able to setup policing were the interace gets 512k down and 128k up so when I conduct a speed test with one user I get 512k and 128k and when I conduct a speed test with two users each gets 256k and 64k. [code] What I want to happen is that each user gets 512k and 128k until a saturation point is hit and then I want the ASA to slow all users down equally.
View 1 Replies
View Related
Aug 16, 2011
One of our customers have one Cisco WLC 2100 (firmware 5.2) with 4 AP Mesh 1522, in a city deployment. In order to achieve local regulatory, has to implement bandwidth limitations per user.
I got screen captures of WLC QoS Profiles options, with Average Data Rate in Per-User Bandwidth Contracts. So my question is, do I need any other equipment to achieve per user bandwidth limitation? Can it be done with WLC QoS options?
View 3 Replies
View Related
Sep 19, 2012
how to limit bandwidth only for user account in window 7...My PC has 2 account ..one is admin and other is user ..i need to limit the bandwidth only for user account ,do I need a software for this.
View 3 Replies
View Related
Feb 10, 2012
The rest of us use wifi for our internet services but this isn't good enough for are newest member so they have now connected a cable directly into the modem, so now whenever he is online ALL wifi suffers dramatically! What can i do to limit his bandwidth and allow the wifi to gain more access is there a way to limit via his MAC address or IP address?
View 3 Replies
View Related
Sep 29, 2012
I need to find a free software to find who is the heaviest bandwidth user on my LAN.The problem is that some of the users on LAN keep downloading/uploading all the time & i couldn't get to view any web-pages?
View 2 Replies
View Related
Jan 31, 2013
When someone downloads a file, or similar, there seems to be no, or very little, room for other requests. I've even tried to be the only one on the network, start a download (from ex. Intel) and then tries to access a simple website, almost only text, and its extreemly slow. I hav ethe latest firmware, a windows domain network and the routers is not acting as dhcp server.
View 4 Replies
View Related
Apr 4, 2012
How does one configure the router so that Internet users can access internal company websites? The only thing that appears is the Cisco router login. Also I need to configure Terminal Services and its not on the list under Service.
View 2 Replies
View Related
Feb 12, 2012
I have a cisco 2950 switch, connected with 4Mbps of internet and number of users will access the internet. There is no restraction on bandwidth limit for users, if any body use high download the remaining users are facing the slow browsing problems.
So, if i can put a bandwidth limitation for every users the problem will be solved. how to restract the bandwidth on user bases.
View 4 Replies
View Related
Jun 6, 2011
How do I setup remote login that would allow 3 or 4 people to login to the same computer. Each person would have their own Windows User Account name, with different privileges.I don't know what software could do this. The computer being connected to would be Windows 7, and there is no special network equipment besides a consumer router.his is a very small business and keeping costs under control is important.
View 6 Replies
View Related
Jan 24, 2013
configuring a switch or a router to limit the bandwidth for a specific user/IP when need it. Most of my remote offices are configured like this:
Users ------ 3560 switch ------- 2801 router -------- T1 to NOC -------- 7204 router with channelized DS3
I use Netflow Analyzer for high bandwidth usage alerts and can see the user's IP right away when someone is clogging our T1s. My goal is to be able to temporarily limit the bandwidth of the user taking over the T1. Whatever is best switch config or on the router.
View 2 Replies
View Related
Jun 29, 2012
I started getting into IT (as a job) a little less than a year ago, though I've been working with computers for close to 20. So networking was never something I was into while working on computers at home. I've been handed a significant position at work and I am learning a lot as I go. I want to know how to grant permissions for a domain user to a directory without adding the user to all of the sub-directories and directories. The only way I've figure thus far is to grant permissions to said folder, then inside remove the "inherit permissions..." but then I have to manually remove the permissions to every other sub-folder.I want to add a single path to a folder by adding single permissions to each folder until the directory in question is reached.
View 2 Replies
View Related
May 14, 2011
I have a Windows 2003 SP2 server with a shared folder. This folder is accessed by 2 people on a regular basis. The problem we are experiencing is when a folder is created by user A, it cannot be moved by user B (and vice versa), as it says the folder is in use.The exact error is: Error Moving File or Folder.Cannot move <filename>: Access is denied.Make sure the disk is not full or write-protected and that the file is not currently in use.I have explicitly set full control for both users on the folder. The drive has 70GB of 500GB remaining. I have also used File Server Management to verify the files were not in use when they were being moved.The server is Windows 2003, SP2. Domain environment, with all relevant users having permissions on the folder, and the everyone account removed. Any other operation inside the shared folder works fine.
View 2 Replies
View Related
May 30, 2013
I would like to connect to a 1Gb routed uplink, and then impose bandwidth limits (via shaping/policing/whatever) on a per port basis. The ports could either be configured to route, or as switchports on separate VLANS. I'm trying to identify hardware that will let me do this. The set up I have in mind is shown below.
I am wondering if the IP Services Adv software on that switch will allow that functionality?
View 3 Replies
View Related
Mar 11, 2013
I have a user that is trying to save an excel speadsheet that is located in a shared folder on a server, the user can open the file and edit ok but when they try to save the file the progress bar pops up but just hangs then a message pops up to saying "file not saved". They are using Windows 7.The user is new and I have just set up their account so thought it might be permission issues but I have logged the user in on two other different machines (1 win7 and 1 WinXP) and they have no problem at all.
View 7 Replies
View Related
Aug 8, 2011
I 3750 doesn't support "shape" command under policy map. How do I limit the bandwidth to 3 M? [code]
View 3 Replies
View Related
Jul 14, 2011
We are a new medical school located in PA. Just have just completed a new building and are now working on getting our network finished. Here is the situation we have a 50MB Internet Connection that comes into our network that then hits the ISPs Cisco 3750 which sends it to two of our Cisco 3750s for redundancy. From the 3750 goes into our Cisco 6509 with a FWSM module, then out from there to our distribution switches which are all Cisco 2960s.
What we would like to do is to control how much WAN connectivity each of our VRFs get. Right now we have a Faculty, Student, and Research VRF formed, and are trying to figure out the best spot where we can say Faculty gets 30MB of Bandwidth, Students gets 10, and Research gets 10. If possible would like burst capabilities.
View 3 Replies
View Related
Jul 8, 2012
I would like to limit the bandwidth available to a different target machine. I have been trying to do this on a Cisco 3750, but first I came across this message:
% QoS: policy-map with police action at parent level not supported ...
Then this:
% QoS: policy-map child ... ClassMap BackLimit only support MATCH-INPUT INTERFACE
Is there any documentation, I searched the forum but all I see are complex solutions, I just wanted to limit the bandwidth for a machine that is in a different site. I wanted to apply the policy on an interface SVI.
View 7 Replies
View Related
Jan 2, 2012
Having problem locating why when a user logs on to their profile, their personal network drive shows everyones personal drive file and they have acces to all files.This is a major security concern as uppper management files are then accessable.It is random, may not always be displayed, or always occur on the same user.The User drive normally displays.
joed on \serverusers$ (H:)
When this takes place the users name is replaced with just Users Users on \serverusers$ (H:) (This can sometimes change to Z drive)
This then exposes all user drives.This does not run from a script but is used in AD under the profile drive letter. Have tried to:Rebuild profile in Active Directory. (New Profile)Re Build user profile on workstation>Rebuild Operating system on Workstation.Change drive on the user profile in AD letter H to Z.Have also tried on a different workstation.
View 1 Replies
View Related
Oct 25, 2011
We are using Catalyst 3750 with 12.2(44)SE. We have two stack configured, one with IP routing enabled. When we try to run an Acquisition Action on IP routing enabled stack, from Admin> Collection Settings> User Tracking, the system replies with an error "Failed to start acquisition: Device unreachable. Please enter a valid device". Acquisition starts successfully when we try with the other stack. We are going to investigate!
View 9 Replies
View Related
Oct 21, 2011
I have a 3750 acting as my WAN router connected to our MPLS provider via ethernet. For a couple days my inbound bandwidth has been completely saturated at 20Mbs (the speed of my link). I know this model of switch does not support netflow, but is there any other way to try and find out what is using all the bandwidth? I have pretty much ruled out anything on the internet since the in/out interfaces of my firewall are not seeing much traffic.
View 3 Replies
View Related
Feb 25, 2013
If I have an interface configured as follows (on a Cisco 3750 Switch)
Interface gi 1/0/24
Bandwidth 100000
And then added the following command
srr-queue bandwidth limit 40
Would the result be 40% of the physical 1Gbps interface or 40% of the 100Mbps Bandwidth set under the interface bandwidth command.
View 2 Replies
View Related
Apr 23, 2013
I want to limit the bandwidth of my Catalyst 3750 series switch, I read the cisco documentation and I applied the commands but I didn't get the wanted results.
For the outbound traffic it's ok, but for the inbound traffic I used policing but I get an unstable traffic. I used, an access list and a class-map to classify the traffic and then a policy-map.(I followed the steps mentioned in this site: [URL]
View 4 Replies
View Related
Jul 17, 2012
We have a guest wireless setup but I need to rate limit the users so no one hogs all the bandwidth. The WLC is connected into a 3750 which is doing all the routing between the vlans. I know I cannot shape the traffic on the 3750.
View 2 Replies
View Related
Jun 3, 2013
Actually i have a design from my customer who have ( Cisco core switch 3750 (allports fiber ports) which is connected to L2 switches , these switches carry servers and end users .the only routing protocol on the access switches is static route ,
My question how can i route the traffic from the server to the end user , as the the server is not direct connect to the core switch.
View 6 Replies
View Related
Apr 3, 2013
however recently when i check my internet usage log on my wireless company (Rogers) the usage is totally off from what my bandwidth tracker shows me. So i decide to turn off my wifi and see what happens, there has always been this weird wifi connection appearing whenever my wifi appears, then afterwards when i turn off my wifi the suspicious wifi connections disappear. is this possible that someone is using our wifi? i might just be overreacting but it has brought me to concern that if the usage continues my family will have to end up paying over $30 for extra internet use. it is very frustrating me because when i check my DHCP client table it only shows 3 connection, ethernet - my desktop which is not turned on, 2 wireless connection - my laptop and my sister's laptop.
View 6 Replies
View Related
May 12, 2012
I have a Router 877 and a switch 3750 also a 10 mbps internet connection and I want to share the internet connection to 5 different vlans with a maximum of 2mbps each one or 2 mbps guaranteed. The switch and the router are connected for a trunk port and the vlans are defined in both devices. I have tried many configurations of this with no success.
View 4 Replies
View Related
Mar 11, 2013
I´m looking for the best configuration to restrict a user to read-only. The restriction should be configured via CLI not TACACS+.
-Hardware: 3750 (probably not interesting for this question)
-Oldest IOS: 12.2(53)SE1
The user should be allowed to: see the running-configurationtrigger all kinds of show-commandsping and traceroute from the device.The user should not be allowed to: upload/delete/rename files on the flash-memoryget into level 15 (not sure if I can avoid this)all other commands despite those from level 1 and those specified above.
View 2 Replies
View Related
May 13, 2012
Logon failure: The user has not been granted the requested logon type at this computer" Im having this same problem on two computers. One running windows vista ultimate 64bit and windows 7 home premium 32 bit to windows server 2008 r2 64 bit?
View 3 Replies
View Related