I have installed ASA 5520 firewall and 1841 Cisco router. firewall is connected to internet and the router. Router is connected to Network. There two networks available. I have completed the configuration. but problems. i dont know how to do the bandwith sharing for these networks.
View 2 RepliesI am trying to restrict bandwidth for a particular LAN IP address on my network using policy maps but it does not seem to be working, My LAN IP address is 192.168.20.199 which i am trying to limit the bandwidth on.
Cisco_1841#sh policy-map interface fa0/0FastEthernet0/0
Service-policy input: Bandwidth_Allocation_In
Class-map: BWTest_In (match-all) 0 packets, 0 bytes 5 minute offered rate 0
[Code].....
VLAN ===> FE 0/1 {With subinterfaces - ALL INSIDE LAN INTERFACES} ==> ROUTER ===> BVI 0/1 {WAN Interface - OUTSIDE}
i am doing NAT for my clients in LAN to WAN - Static NAT i want one of my client who is excessing some service with his Public IP to get a specific amount of bandwidth ... as right now he is hogging all the bandwidth .i have 1841 router.
we have a bandwidth pipe terminating on 1841 BVI interface... now we want to limit all the traffic going from inside to WAN circuit to half... for example 10 Mb pipe we want to reduce to 5 mb on bvi interface.. how this can be done .. as of not there is not need to police any specific type of traffic .. this needs to be done for any traffic from inside to outside...
View 1 Replies View RelatedI got a 5MBps Lease Line Connection via FAST ETHERNET PORT. i got a Cisco 1841 Router.
I want to distribute bandwidth in this ratio 2MBps/2MBps/1MBps
2MBps = Office Connection
2MBps = Computer Laboratory Connection
1MBps = WIFI Connection
1841 has only 2 Fast Ethernet ports
so im planning to add up a 2modules of 2-Port Fast Ethernet High-Speed WIC for Cisco Integrated Services Routers
I have cisco 1841 router and two types of ISP line (Different provider):
1. Lease line = 2 mbps ( it is terminated over cisco 1841 router); For internet-access purpose
2. DSL = 1 mbps; For internet-access purpose
Our cisco 1841 router have only two fastethernet port, first for WAN Port where 2 mbps lease line terminated , second for LAN which is connected to Cisco switch and 1 mbps adsl line running seperatly which is not part of cisco 1841 router. i am planning to buy HWIC card for extra wan port on existing router where i will terminate 1 mbps adsl line or may be other provider lease line.I want to merge or aggregate both WAN link, My concern is to merge both line (2+1) and get single one (Just like as Etherchannel thing) , get 3mbps for LAN for internet access.
I need to know the Cisco 1841 Router FE Maximum Bandwidth Support and the Cisco 3825 Router GE Maximum Bandwidth Support. I cannot find this information in Cisco for these old devices.I would like to have the platform capability for all situation (only IP base, with QoS, with ACL, with encryption, etc.)
View 1 Replies View RelatedWe have some point-to-point sites linked with our HO with 10-30mbps speed. We have provided DID telephone lines to these sites as well.
We want to limit the bandwidth with 1mb bandwidth only and also make sure that the voice traffic (DID telephone lines) gets the priority over all other traffic even if they are utilitizing the 1mb link completely. We have some Cisco 1841 routers that we are planning to configure on the main uplink on each of these sites. how to give the priority to the voice traffic yet limiting the bandwidth to 1mb.
When someone downloads a file, or similar, there seems to be no, or very little, room for other requests. I've even tried to be the only one on the network, start a download (from ex. Intel) and then tries to access a simple website, almost only text, and its extreemly slow. I hav ethe latest firmware, a windows domain network and the routers is not acting as dhcp server.
View 4 Replies View RelatedThis is existing network diagram and find attached file for configuration of Router and L3 Switch:ISP provided 6 Mbps internet access link with ethernet Handoff which is terminated over Cisco 1841.ISP also provided pool of 30 Public ip's 125.63.74.33 /27 , range from 125.63.74.34 to 125.63.74.62.In my current setup, all Inside to ouside traffic going out through 125.63.74.34 public ip because this public-ip NAT overload with Router F0/1 interface.
1) I want to divide 6 Mbps link physically into three parts 2Mbps, 2Mbps, 2Mbps for three VLANs.
2) I want to also configure each vlan IN/OUT traffic with different Public ip. is it possible or not ?
Vlan2 = 172.25.162.0 /24 => Inside to outside / Outside to inside traffic through 125.63.74.40
Vlan3 = 172.25.163.0 /24 => Inside to outside / Outside to inside traffic through 125.63.74.41
Vlan4 = 172.25 164.0 /24 => Inside to outside / Outside to inside traffic through 125.63.74.42
How can i configure above desired setup with CBWFQ
how can I configure a Catalyst 3750, which interface is patched on the ISP router (internet uplink bandwidth = 20Mbps with) to allow all active users are sharing the bandwidth (either 5, 50, 100, user simultaneously..in internet surfing. right now it's like when a user starts a larger download that it uses the bulk of the bandwidth, and other users can reach all remaining extremely slow access times.
View 3 Replies View Related-I have a 10 mbps subscription.
-I use a router and connect two pcs on it,they use internet at the same time.
Q:will the speed be 5mbps on each computer? if so,is there a way to make it 10mbps each while they are both using the internet at the same time?
We have 1 mpbs bandwidth line, but most of the time we are getting only 300-500 kpbs download speed, i want to send statistics report to our ISP, what will be best procedure to test the bandwidth report, i have checked in some websites like bandwidthplace and speedtest but these sites are not accurate, how to check the actual bandwidth we getting from ISP against 1 Mbps. We have solarwinds monitoring tool in this i have configured the WAN interface for 1 mbps
View 5 Replies View RelatedI wanted to setup a home network for primarily sharing my music, pictures and videos.I have a PS3 which can stream the video/music and display the pictures from a media server to my TV.I was wondering between NAS and a desktop computer? and wanted to know which was the better or cheaper solution? (2 much 2 ask for both)
Main Issues
--Will NAS work with PS3?
--Incase of a computer, i know i will be able to use logmein or gotomypc to Download files directly to that machine even when im not home and when i do get home its ready to go. Can the same be achieved with a NAS?What else should i consider? i.e. pros and cons of both.
I am trying to establish a connection with an already existing IPsec VPN for file sharing. I click on the icon and get error messages when I type the correct username and password. I also entered the shared secret key correctly. I do not know where to enter the "group" name that coincides with the key I was given.
View 5 Replies View RelatedI'm in the middle of restoring a Windows XP computer after a drive failure, and on the new system, the Turn On File and Printer Sharing setting has been forcing a reboot and always resets itself to Off after the restart.
View 1 Replies View RelatedTrying to create a network for file sharing, as have upgraded the 'server' (part of a Workgroup, not a Domain) from WinXP to Win7 and experienced problems ever since. Ironically the problems haven't mainly been with sharing files between Win7 and WinXP systems, but between 2 Win7 systems. I bought a new Win7 laptop and tried to connect it to the server, but it hasn't had Read/Write privileges over the files in the Win7 server. Entering a username and password to gain access to the servers folders has not been a problem, and as far as I know, opening files such as documents has not been a problem either. However, when trying to save an edited document, access is denied, and if I try to open an executable file (this is necessary for a node installation), it prompts me for a network password. Every combination possible of username and password from the 2 systems (including '' or 'SYSTEMNAME' before the username) has not worked. I tried syncing the times which was apparently a previous problem, but to no avail. I am unable to access Local Security Policy, as the server is running off Home Premium. I have tried creating a new workgroup, removing and changing passwords, enabling guest access to the network through the Windows Resource Kit Command Shell, creating identical users on both computers, but nothing appears to have worked.
View 1 Replies View Related[code] Basically, we used to use Outlook for our customer management, but after I tried to design a custom form for customers that suited our needs better than Outlook's default form (i.e. we don't need state, country, region, etc. for each customer, and we'd prefer to have spots for Roof, Shingle, Shingle color, etc. in their place), we ended up turning OneNote into our new Customer Management System.Our problem is sharing files, and the security or lack thereof that goes along with it.We used to save all the files to a single computer, and use Windows 7 Home group to access them. That worked okay, but often we couldn't see the file-holding computer, and would have to disconnect/reconnect to the internet.
We recently bought a NAS HD, which actually works a lot better than I expected. Unfortunately, we've learned recently that new employees are not always the most trustworthy. So this is what we are trying to do:We want to set up some type of way for us to save, store, and access files, which allows us to keep track of who has done what (access, save, copy, delete, print, etc.), preferably one where we can set up alerts if certain things happen (i.e. someone copies and pastes the entire thing, or attempts to delete). We've run into the problem where, yes, we want people to be able to copy and paste certain documents, yes we want people to be able to print, but no we don't want someone to be able to print out our entire customer lists, current project lists, etc.This NAS HD (MyBook Live 2TB by Western Digital) could quite possibly have the most ridiculous set up I've ever encountered. I can set up accounts and passwords, but they are completely irrelevant because from "Computer" you can just select the z:/ drive and it will still take you to our files. We just brought on a couple new people, and its like, everyone tells them to come to me in regards to the computers, and I can't even hook them up to the internet because it would give them access to our network, which in turn gives them access to our z:/ drive, which contains every file our company has.
\toshibapictures is not accessible. you might not have permission to use this network resource. contact the administrator of theis server to find out if you have permissions.
I have a little small network created with 6 computers. 5 of them are windows xp home and pro. jsut bought a new laptop with windows 7 64 bit home pre. All the xp laptops can share files easily but the windows 7 is giving me a really hard time.
The win xp computers can see the windows 7 folders showing up in my network places but when i try and open then it gives me this error "\toshibapictures is not accessible. you might not have permission to use this network resource. contact the administrator of theis server to find out if you have permissions"
I need setting up File/Folder/Printer sharing in small office LAN and also secure Files (password protect) among users. I have attached two JPG files in which i have tried my best to show the network diagram and how i want to share the files and folders. All the PCs are connected and i have made one Windows 7 Ultimate PC acting as File Server keeping its D Drive in sharing with other five Windows 7 Ultimate PCs acting as clients. I just want to know how to protect Files as per my requirement. There are no fixed PC of any dept users. All the users or Dept Head use any PCs as per availability.
View 1 Replies View RelatedI shared some folders in my C drive and turned off password protected sharing in the network and sharing centre from control panel. However, when I use my Seagate FreeAgent Theatre + to access the files shared online, it keeps asking me to log in with a username and password. How to I disable this?
View 4 Replies View RelatedI have got the same problem but I have tried these steps and no go :(
View 1 Replies View RelatedBefore I moved home I had one netgear router supplied by virgin media. On my home network I had my pc sharing it's printer and also some shared folders I.e. Music folder, my documents etc. Now I've moved I have had a new netgear box supplied by virgin media (which I call virgin media 7) which because of the shape of the building doesn't reach my bed room. To fix this I have had to connect my old netgear box (which I call virgin media 8) to the new one via 10m of CAT5e but now I can't access my shared printer or shared folders on my win xp pc which is connected to virgin media 7 via wireless if my vista laptop is connected to virgin media 8. I have tried looking in the setting for the option that makes it just act as an wireless extention to vm7 but they have removed the menu from the settings.
View 5 Replies View Relatedour workstations provide data (files) to this network by using RDP. RDP allows a user to share the entire contents of one's C drive. I dislike this and many others in my organization also dislike this (from a security threat point of view). I am looking for an alternative and more secure approach.
View 5 Replies View RelatedI just recently bought a windows 7 laptop and got everything set up to my preferences... or so I though. I was walking past my fathers computer and noticed he was browsing through MY computers files through windows media center, I thought I had told everything on the control panel/windows setup to NOT share files but I am finding more and more that I all my media/data is wide open for everyone to access
View 1 Replies View Relatedrecently i was trying to share files between two computers using a networking switch.(windows xp) I tried using network setup wizard on the host computer it only gave me two drive options f drive and the floppy disc drive. so i selected f drive to copy files. I inserted a cd and clicked next but nothing happened. i tried clicking format button and it asked me to 'insert a cd to f drive' so I avoided the format button.My computer has a backup system which someone installed and im not too sure about it so I was wondering if f drive was referring to the backup system (sort of looks like an external hard drive with lights on it connected to modem) or maybe referring to usb port. I did not try using my usb yet. The second pc I noticed did not have network setup wizard on control panel and was not sure if i needed it. I heard that a router has a firewall and is more safer than using a networking switch. at this stage i dont need internet connection for the second pc
View 1 Replies View RelatedOk, I have a new win 7 pc and my old win xp pc has all my video and picture files. On both of my xp pc's i can transfer files via my network places. Can I and if so how do I do that from the xp pc to the win 7 pc? I can stream the videos from the xp on the win 7 but not transfer them.
View 17 Replies View RelatedIm on windows 7, I was able to view people on the network, able to access their public folders, but all of a sudden when I click on network, it just says at the top "Network Discovery and file sharing are turned off. Network computers and devices are not visible, Click to change..." I click on it and it doesn't do anything at all, same message comes on. SO i thought Ill change the settings, I see that Network Discovery is off so I turn them both on, save changes and then try again, same message appears, I go back to settings and see that they are switched off again, it doesn't stay on.
View 6 Replies View RelatedI installed windows server 2008 in another country with active directory - DNS server - file services Roles. with public IP.I can RDC the server - I can ping IP local and WAN - I can ping computer name from Local only not WAN.I can access the shared files locally using \IPaddresssharedmy problem is that I can't access \IPaddressshared from outside the network.[CODE]
View 3 Replies View RelatedI have two network card in my server and they are connected with different network and we are sharing data between them, but i dont know how, how to transfer data between these two different network.
View 4 Replies View RelatedI've recently had an issue where when I turn on File and Printer Sharing, and click apply, I go straight back to the advanced setting menu and its switched back to off despite me changing it.I cheked my services menu and I'm not sure what file and printer sharing has a dependancy on, but Workstation, Netlogon, and Computer Browser will not turn on with the error "windows could not start *** service on the local computer. Error 1068: The dependency service or group failed to start"I network printers and servers for a living, so this is an issue when I'm troubleshooting problems.I cant really name everything thats been installed on this laptop, it changes pretty consistently, but no programs should have interfered with my network
View 1 Replies View RelatedI am putting an pre-labbed DMVPN Hub config onto a production 1841. We had to upgrade the IOS to support protection with NAT so the current IOS we're running is c1841-adventerprisek9-mz.124-25g.bin.I can paste the configuration in fine (via the tunnel interfaces) and the router accepts it however the 'show dmvpn', 'debug dmvpn' and other related commands don't work. I have checked the IOS feature navigator and it definitely shows that DMVPN phase 1 and 2 are supported in this image.
View 5 Replies View RelatedI have a 1841 router and I can ping the f/0 port from my pc. However when i try to console to it, it is not showing up anything but a blinking cursor. I tried all different baud rates on my teraterm but still not luck. I picked the baud rate disconnected and reconnected everytime and still nothing. Then I tried to telnet to it using teraterm but it would just open a console window and then close.
View 10 Replies View Related