Internet History / Company Network
Nov 13, 2011Having worked abroad, will my internet history be visible to IT when I reconnect my laptop to the company network?
View 2 RepliesHaving worked abroad, will my internet history be visible to IT when I reconnect my laptop to the company network?
View 2 RepliesIf I loose bookmarks on my Browser, can I contact my ISP for a log to my internet history?
View 7 Replies View RelatedI'm no network security expert but have been asked to "investigate" someone who has been connecting their personal laptop to the company network and using our internet to do "questionable" activities.
Basically I have this information taken from our domain controller's logs:
- DHCP address that was leased to the laptop at the time of the "infractions".
- Computer name of the laptop.
- Precise date and time of when this person was connected to our network.
Based on the DCHP address, I can somewhat narrow it down to a few different switches at different locations in the building, but there's no way to pinpoint it exactly. If I can figure out which switch they connected to, I would know who did it.
How to open website company in internal network
View 1 Replies View Relatedi wanted to know if i could setup a netgear wireless router to my ethernet cable that is coming out of the wall. is it as easy as plugging the cable coming out of the wall into the internet port on the router?
View 5 Replies View RelatedI have a company issued laptop with a VPN client in it. I use that laptop and that VPN client to logon to the company network. How can I install the same VPN client in my personal laptop and dial to the company network?
View 1 Replies View Relatedhow can I configure a Catalyst 3750, which interface is patched on the ISP router (internet uplink bandwidth = 20Mbps with) to allow all active users are sharing the bandwidth (either 5, 50, 100, user simultaneously..in internet surfing. right now it's like when a user starts a larger download that it uses the bulk of the bandwidth, and other users can reach all remaining extremely slow access times.
View 3 Replies View RelatedCan devices that share a router have access to each others internet history? Can one device affect another device that also uses the router?
View 3 Replies View RelatedHow do I find internet history on my Netgear 6300 router?
View 4 Replies View RelatedI'm using wireless iternet supplied by my roomate. They have the router and service, and have given me code for use on my computer. How do I hide my web history in a way that at least they don't know what it is if seen?
View 2 Replies View RelatedHow does one configure the router so that Internet users can access internal company websites? The only thing that appears is the Cisco router login. Also I need to configure Terminal Services and its not on the list under Service.
View 2 Replies View Relatedhowever recently when i check my internet usage log on my wireless company (Rogers) the usage is totally off from what my bandwidth tracker shows me. So i decide to turn off my wifi and see what happens, there has always been this weird wifi connection appearing whenever my wifi appears, then afterwards when i turn off my wifi the suspicious wifi connections disappear. is this possible that someone is using our wifi? i might just be overreacting but it has brought me to concern that if the usage continues my family will have to end up paying over $30 for extra internet use. it is very frustrating me because when i check my DHCP client table it only shows 3 connection, ethernet - my desktop which is not turned on, 2 wireless connection - my laptop and my sister's laptop.
View 6 Replies View RelatedI recently changed webhosting partners for my company's website. With the Change I can view my company's website from inside the LAN but can outside of the LAN.
View 1 Replies View RelatedBy default SBS 2011 places a shortcut on the desktop to companyweb and adds shortcut in the start menu under Windows SBS to companyweb as well.
I found the instructions to edit out the xlm file for SBS 2008 to prevent this from happening but that does not work with SBS 2011 as I do not see those settings.
I did also find the login script for SBS 2008 settings to remove those after the fact all of the time and that is easy enough to change to make it work with SBS 2011; but I would much rather just prevent the shortcuts from being placed in the first place.
I need to use the company laptop to connect to home broadband. However, when it is connected, it shows "no or limited connectivity".All the other laptops/computer at home can connect without any problem.When I try to use my iPhone as hotspot. My company laptop can connect and browse websites (but extremely slow because is 3g speed).
View 3 Replies View RelatedI am running a smaller hosting company and i am currently looking at a Cat6506 switch with a SUP720 Supervisor Engine. I have also been looking at a Cat6509 with a SUP2-GE Supervisor Engine. At the moment i am getting my connection from a ISP but i am going to get my own BGP AS now.. My question is just, how much will the SUP720 be able to route, and how many routes will i need to get it to route my packets in and out of my AS? I have seen that the full BGP table is over 400,000 and the SUP720 is only capable of 256,000, but do i really need the full table? I
major differences between the SUP720 and SUP2-GE Supervisor Engines?
I have a AD server that needs to access to servers at a company out on the web. it an asa the protocol is ldap
AD server 10.12.1.56 / 24
External servers 206.123.45.122, 174.87.96.143
ASA configuration
access-list outside permit tcp host 206.123.45.122 host 10.12.1.56 eq 389
access-list outside permit tcp host 174.87.96.143 host 10.12.1.56 eq 380
I have a ASA 5505 that I have been using to test run the IPSec VPN connection after studying the different configs and running through the ASDM I keep getting the same issue that I can't receive any traffic.
The company LAN is on a 10.8.0.0 255.255.0.0 network, I have placed the VPN clients in 192.168.10.0 255.255.255.0 network, the 192 clients can't talk to the 10.8 network.
On the Cisco VPN client I can see lots of sent packets but none received.
I think it could be to do with the NAT but from the examples I have seen I believe it should work.
I have attached the complete running-config, as I could well have missed something.
FWBKH(config)# show running-config
: Saved
:
ASA Version 8.2(2)
[Code].....
have doubt, now my system is under my company domain,is there possible my network admin can watch my browser history
View 1 Replies View RelatedI have a lap top that someone else uses, is there anyway I can set some setting that erasing the history is not an opinion?
View 1 Replies View RelatedI'm running a cisco 891 with ios Version 15.2(4)M3 ,now I have a dialer 0 interface with fast0 and 1 as well, all is working fine.now I just read about the new sh int 'INT' history feature but when I do it I get nothing.. not a graph or anything I get just nothing as if I just hit enter.anything I need to do to enable the feature?,if I do a sho proc cpu history that works just fine but not the sh int XYZ history commands
View 2 Replies View RelatedBasically we have 5 users in one of our offices and the internet works completely fine.However we cannot access the company Intranet. We receive 'The page cannot be displayed'.I have no idea why because all other sites work okay!Note: The Intranet can be accesed from home and libraries as I have checked aswel as 2 offices we have, everything works fine.It's just the one office and everything else works fine.
View 2 Replies View RelatedNowadays my Company works with autonomous APs (AP1142 most of them.We have a WLC 5008 and I am working on the implementation project... So far so good.BUT, I have just realized that the Company didnt buy a second WLC (this project started 1 year ago and I wasnt an employee here yet...).If I transform all autonomous APs we have (around 25, locally and some of them remotes)... And then If I have a HW problem with our single WLC... those APs will continue working ?
View 4 Replies View Relatedhow to track webhistory of a particular system using its ip address...can i remotely monitor the systems webhistory using its ip address.
View 5 Replies View RelatedI have been appointed to monitor an internet networking consist of 4 computers.
1. To block some websites for all 4 computers. Example, maybe if I want to block YouTube - Broadcast Yourself. or any website. This is actually to prevent users to access any adult site.I dont want to block internet entirely. But just to block some website only.
2. To have a report for internet URL for each computer. Not a bandwidth or traffic report. I dont need that. What I want is a list of URL that the user have surf in the internet.
How can i monitor users web and URL history with monitoring utilities?i am using solarwinds orion but i don't know how can i monitor web and URL histories.does this software have this ability or not?
View 6 Replies View RelatedPrivacy in the web, I have a new laptop and I want to know if my verizon router will store my browsing history if I use Incognito mode or privacy mode? Because I don't need people seeing what I was doing.
View 1 Replies View RelatedI was wondering if the ASA 5520 Firewall had the ability to view web traffic or site surfing or does this only work if I have a logging server configured for the ASA to log to? I don't use the ASA much since I'm the database administrator for my company but from time to time I'm asked when nobody else is available. I just checked the ASDM & see that the buffer clears after so many lines & I don't believe we've got a logging server.
View 2 Replies View RelatedI would like to know the basic configurations for Win Server 2008 Standard for a small office (60 clients) The company has a Sales, HR, warehouse, and Accounting, and VPN for some sales, what configuration do you recommend me for each area? Right now my server has DHCP, DNS, and AD (do I need to install any other role?), Also what other configuration do I need in order to control my clients and users, and for security? how can I make the clients to save their files in my server? or make a copy of their files from their computers to my server? Any information for security? in my server or Router?
Like the tittle say, I just want to know all the configurations needed in a network for a small company.
I am getting crazy with our Cisco Linksys RV016. It handles 3 simultaneous connections to the internet using 3 ISP. All our company goes to the internet using this cisco linksys RV016, our corporate switches are connected as clients to the router. Sometime ago, this router started to drop POP3 connections to our network, when this problems is present, all users get Receiving' reported error (0x80042108) in Outlook 2007-2010. Currently i have setup POP3 service to use the First ISP connection, but when this problem is present, the only way to eventually resolve it is to switch the link POP3 Service from the First to the Third ISP, sometimes it works immediately, sometimes don't. We are using this router since 2007 but this problems started to arise from this month.
Our switch is the latest firmware available is Cisco website, this is the Firmware Version: 3.0.2.01-tm.
I have a ASA 5520 upon which I need to build a WebVPN for the company urls - webmail, intranet portals etc. There will be 2 groups -
a. Confidential Access - For senior management.
b. Public Access - For employee access.
RSA Token & LDAP auth would be used for access to the WebVPN. However, I am unclear on certain aspect.How do I isolate the 2 groups? I mean only Senior management should be able to view & access the first set of links while employees see and access the other set of links only.Both the groups will be available to all users loggin on to the WebVPN. Since the authentication mechanism - LDAP - is the same, anyone would be able to access the groups and in turn, urls.
we wish to implement IPSec remote access vpn with the condition that employees should be able connect to this vpn only from company issued laptops and not from any other computers. I assume using client side certs is one of the ways to do it but I couldn't find any doc that was really useful. Cisco's documentation seems quite obscure. We are on 8.1 (5520)
View 2 Replies View RelatedI'm both concerned and pissed off that my creepy housemate might've used our network to invade my privacy, steal expensive multimedia & valuable personal info, and may have continued access to my computers. I have a Win7Home laptop and a Win7Prof desktop. Both have a Windows password.I was attempting to back-up files from my laptop to my desktop ~2 weeks ago, so I created a Shared Folder and put files in there. After the copying was done, while I was moving the folders from the Shared Folder to a private folder on my desktop computer, there was an error message for one of the folders, saying it was open in another window... this was strange, since it definitely hadn't been opened within weeks by me. But it resolved immediately (like they got alerted). And of all the folders, it's one which my stalker roommate would def be interested in.
Also, I recently noticed that there are Remote Desktop Connection icons on both my computers (with "Allow" checked on laptop only). They were created 49 seconds apart, that NEXT morning. They reside in the same parent folder as where the shared folder resides (Documents folder on laptop and a Partition on the desktop). It is possible that I created the RDCs by accident while amateurly trying to network the my PCs, or could they be offspring from a trojan/DLL file which was placed in the Shared folder by my creepy roommate...? As "admin" over our router, would he have been alerted to the fact that I shared a folder? I'd enabled "Home" network and discovery for my computers. Could he access other NONshared folders if my computer was visible? Can router admins view a window that can constantly track network computer activity?