How can i monitor users web and URL history with monitoring utilities?i am using solarwinds orion but i don't know how can i monitor web and URL histories.does this software have this ability or not?
View 6 RepliesI've lost about a TB worth of data. I'm rebuilding a computer and had my hard drive, a Western Digital Caviar Black WD1001FALS 1TB, in an external enclosure so that I could access files from it until I could move them to a new drive. I just happened to hook the drive up to the USB port on my new Linksys EA3500 router and now I can't see anything. I believe the process of plugging the drive in, allowed the router to mess with the partition table of my drive. Before, when things worked I saw three logical drives. one of about 50-75 MB of reserved space. One of about 80 GB that was my original system drive and one of about 920 GB that was my main data drive. All of these were NTFS. Now when I look at the drive, all I see is one drive FAT32 drive of about 71 MB.If I look at the drive under Computer Management, Storage, Disk Management, I see the drive is made up of a 71 MB FAT 32 Primary Partition and a 932 GB Unallocated partition.Am I totally screwed? Is my data still there and is there any way for me to access it or any utilities I can use to get to my data in this unallocated partition? What the heck did this thing do to my drive without permission?
View 5 Replies View Relatedmy son can not get a enternet conn keeps getting error message no network adaptor
View 1 Replies View Relatedhave doubt, now my system is under my company domain,is there possible my network admin can watch my browser history
View 1 Replies View RelatedI have a lap top that someone else uses, is there anyway I can set some setting that erasing the history is not an opinion?
View 1 Replies View RelatedIf I loose bookmarks on my Browser, can I contact my ISP for a log to my internet history?
View 7 Replies View RelatedI'm running a cisco 891 with ios Version 15.2(4)M3 ,now I have a dialer 0 interface with fast0 and 1 as well, all is working fine.now I just read about the new sh int 'INT' history feature but when I do it I get nothing.. not a graph or anything I get just nothing as if I just hit enter.anything I need to do to enable the feature?,if I do a sho proc cpu history that works just fine but not the sh int XYZ history commands
View 2 Replies View RelatedHaving worked abroad, will my internet history be visible to IT when I reconnect my laptop to the company network?
View 2 Replies View Relatedhow to track webhistory of a particular system using its ip address...can i remotely monitor the systems webhistory using its ip address.
View 5 Replies View RelatedI have been appointed to monitor an internet networking consist of 4 computers.
1. To block some websites for all 4 computers. Example, maybe if I want to block YouTube - Broadcast Yourself. or any website. This is actually to prevent users to access any adult site.I dont want to block internet entirely. But just to block some website only.
2. To have a report for internet URL for each computer. Not a bandwidth or traffic report. I dont need that. What I want is a list of URL that the user have surf in the internet.
Privacy in the web, I have a new laptop and I want to know if my verizon router will store my browsing history if I use Incognito mode or privacy mode? Because I don't need people seeing what I was doing.
View 1 Replies View RelatedI was wondering if the ASA 5520 Firewall had the ability to view web traffic or site surfing or does this only work if I have a logging server configured for the ASA to log to? I don't use the ASA much since I'm the database administrator for my company but from time to time I'm asked when nobody else is available. I just checked the ASDM & see that the buffer clears after so many lines & I don't believe we've got a logging server.
View 2 Replies View RelatedI'm both concerned and pissed off that my creepy housemate might've used our network to invade my privacy, steal expensive multimedia & valuable personal info, and may have continued access to my computers. I have a Win7Home laptop and a Win7Prof desktop. Both have a Windows password.I was attempting to back-up files from my laptop to my desktop ~2 weeks ago, so I created a Shared Folder and put files in there. After the copying was done, while I was moving the folders from the Shared Folder to a private folder on my desktop computer, there was an error message for one of the folders, saying it was open in another window... this was strange, since it definitely hadn't been opened within weeks by me. But it resolved immediately (like they got alerted). And of all the folders, it's one which my stalker roommate would def be interested in.
Also, I recently noticed that there are Remote Desktop Connection icons on both my computers (with "Allow" checked on laptop only). They were created 49 seconds apart, that NEXT morning. They reside in the same parent folder as where the shared folder resides (Documents folder on laptop and a Partition on the desktop). It is possible that I created the RDCs by accident while amateurly trying to network the my PCs, or could they be offspring from a trojan/DLL file which was placed in the Shared folder by my creepy roommate...? As "admin" over our router, would he have been alerted to the fact that I shared a folder? I'd enabled "Home" network and discovery for my computers. Could he access other NONshared folders if my computer was visible? Can router admins view a window that can constantly track network computer activity?
How to clear history of cisco ASA 5520 ?
View 1 Replies View RelatedWe are using the ASA 5520 as Firewall and VPN gateway for remote access by employees and vendors. Is there a way to view a history of VPN user logins? We used to have (or we still have but no longer using it) th CVPN 3005. This device keeps log files of all activities. I miss having this capability in the ASA 5520.
View 4 Replies View RelatedOur enterprise uses a VPN Concentrator 3000 for our VPN access. Is there a way to view a log history of what user connected to VPN and what IP address they were assigned? It would be for 2 days ago which was over the weekend.
View 3 Replies View RelatedI want to do something with IP SLA and started by estabilishing a baseline.
I'm trying to check history on an ASR. I tested same config on a 3845 and was forgetting the "history filter all". After this I could see history table on 3845 but still history is empty on the ASR1006. The operation started because I can see information with "show ip sla statistics".
know if i missed something or maybe this is not supported in ASR1006?
re-ld-tcc-02_ASR1006#show vers
Cisco IOS Software, IOS-XE Software (X86_64_LINUX_IOSD-ADVIPSERVICESK9-M), Version 15.2(1)S2, RELEASE SOFTWARE (fc1)
[Code]......
Can devices that share a router have access to each others internet history? Can one device affect another device that also uses the router?
View 3 Replies View RelatedHow do I find internet history on my Netgear 6300 router?
View 4 Replies View RelatedI'm using wireless iternet supplied by my roomate. They have the router and service, and have given me code for use on my computer. How do I hide my web history in a way that at least they don't know what it is if seen?
View 2 Replies View RelatedHow can i check the website history in router?I want to know the website which the user explored through the router.
View 1 Replies View RelatedI am doing troubleshooting of the wireless connection problem.
<Environment>･WLC 7.0.116.0 is used together with WCS and MSE. ･Lightweight APs (3502i) are connected to the controller. ･It attests a radio client by WPA2-PSK.
The status of the client when not connected with wireless LAN was frequently displayed as follows by Location History.
State1:802.11 State : ProbingIP Address : blankMAC Address : blankAuthenticated : No SSID : blank
State2:802.11 State : AssociatedIP Address : 0.0.0.0 (In practice, Static IP is set up.)MAC Address : XX:XX:XX:XX:XX:XX (expected)Authenticated : No SSID : XXXX (expected)
What is the cause of problem which is assumed in each state of State1 and State2?
How to see the ipsec vpn client users login history, they are authenticating to the local AAA, not to active directory. I am able to see current login session. by going to monitoring vpn statistics sessions this shows me current sessions but I would like to see for example logins for vpn client for the last month.
View 11 Replies View RelatedI need to make a report of the VPN history on an ASA 5510 and I cannot find a way that fast.
View 1 Replies View RelatedI am currently using ASDM v6.4 and would like to enable the historic metrics feature to view/produce graphs/tables for interface using the Last 5 days, every 2 hours option. how this will impact performance and storage space on the device?
View 1 Replies View RelatedI matched the traffic statistics on one of my Cisco ASA site-site tunnels with the OID:1.3.6.1.4.1.9.9.171.1.4.3.1.1.25.4142 (cipSecTunHistInOctets). I was real proud of myself for a few days until I checked the history and found the OID wasnt working.After some troubleshooting I found that the last four digits (4142 in this case) change whenever the tunnel drops and re-establishes itself. Any way to collect tunnel utilization history on an ASA with SNMP? Is there a different OID I can use thats based on the endpoint IP?
View 2 Replies View RelatedI have a problem with cpu high.tell me if normal have this process?
CPU utilization for five seconds: 29%/0%; one minute: 29%; five minutes: 30%
PID Runtime(ms) Invoked uSecs 5Sec 1Min 5Min TTY Process
29 198216576 402619350 492 15.83% 15.87% 15.68% 0 Cat4k Mgmt HiPri
30 175197296 96703435 1811 10.23% 10.10% 10.64% 0 Cat4k Mgmt LoPri
Cisco IOS Software, Catalyst 4000 L3 Switch Software (cat4000-I9S-M), Version 12.2(25)EWA14, RELEASE SOFTWARE (fc1)Technical Support: [URL] Copyright (c) 1986-2008 by Cisco Systems, Inc.Compiled Tue 20-May-08 18:49 by chendahImage text-base: 0x10000000, data-base: 0x114BE208
ROM: 12.2(31r)SG2Dagobah Revision 226, Swamp Revision 34
System returned to ROM by reloadSystem restarted at 00:36:52 UTC Sat Dec 10 2011System image file is "bootflash:cat4000-i9s-mz.122-25.EWA14.bin" cisco WS-C4506 (MPC8245) processor (revision 10) with 262144K bytes of memory.MPC8245 CPU at 266Mhz, Supervisor II+Last reset from Reload1 Virtual Ethernet interface144 FastEthernet interfaces2 Gigabit Ethernet interfaces511K bytes of non-volatile configuration memory.Configuration register is 0x2102
is there any method on the asa 5510 let u see the history of the remote access vpn connection for the last week
View 6 Replies View Related1. How to check the history alarms in Router 7609?
2. How to check whether an Interface was down?
For some reason I am unable to retain the system message logging and config archive references after a reboot of the router. I need to be able track config changes and retain the ability for the customer to recover the original config should they destroy the config through any misguided fiddling on their part. There is no remote management and these router need to be recoverable. I know this used to configured by default on earlier routers as I've checked on teh ones we have, but checking through the configuration has not worked and i have everything configured the same but system messages are still lost on reboot. Im using Cisco 3845 running IPbase 12.4(3) and the config i have is shown below.
Logging buffered 4096 debugging
no logging console
!
!
Archive
Log config
Logging enable
Logging size 100
Notify syslog
Hidekeys
Path flash:archive-config
!
Logging history size 200
Logging facility local6
We've had problems with our internet router losing connection to the internet. All traffic stops, a reboot resolves the problem. The router only has a public IP and it's connect through a dummy switch to the ASA as shown. I want to be able to monitor netflow or something and wondered if I could add a static route to the 10.x.x.x network and then add the netflow commands. Here is kind of how it looks, I simplified it some by removing unnecessary devices
View 2 Replies View RelatedI live in a shared flat. And all 20 rooms are connected to this switch I believe. Is there any method to prevent the landlord/tech guy monitoring our internet activity (e.g. bandwidith activity, websites we looked at, etc.
View 5 Replies View RelatedI need A network diagram for 50 PCs with Network monitoring
View 3 Replies View Related