Networking URL History Monitor And Filtering
Oct 1, 2011
I have been appointed to monitor an internet networking consist of 4 computers.
1. To block some websites for all 4 computers. Example, maybe if I want to block YouTube - Broadcast Yourself. or any website. This is actually to prevent users to access any adult site.I dont want to block internet entirely. But just to block some website only.
2. To have a report for internet URL for each computer. Not a bandwidth or traffic report. I dont need that. What I want is a list of URL that the user have surf in the internet.
View 1 Replies
ADVERTISEMENT
Dec 22, 2008
I matched the traffic statistics on one of my Cisco ASA site-site tunnels with the OID:1.3.6.1.4.1.9.9.171.1.4.3.1.1.25.4142 (cipSecTunHistInOctets). I was real proud of myself for a few days until I checked the history and found the OID wasnt working.After some troubleshooting I found that the last four digits (4142 in this case) change whenever the tunnel drops and re-establishes itself. Any way to collect tunnel utilization history on an ASA with SNMP? Is there a different OID I can use thats based on the endpoint IP?
View 2 Replies
View Related
Feb 7, 2012
I have come across articles mentioning that URL Filtering can be implemented by using ASA 5505 with URL Filtering Servers. But Websense and other Web Filtering Servers are paid ones ? Are there any free solutions available ? What exactly is N2H2 ? The reason is I don 't want to increase the CPU utilization of ASA by implementing URL filtering within the device. If I have around 30 nodes which connects to the internet via a 2Mbps line through ASA 5505 and if I want to block around say 10 or 15 URLs , will it increase CU utilization beyond permissible limits ? Currently the CPU Utilization is around 10 - 15 . Here's the infrastructure setup .
------------------------------------------------------------
Nodes -->Switches-->ASA 5505-->Internet
-------------------------------------------------------------
View 4 Replies
View Related
Feb 24, 2012
have doubt, now my system is under my company domain,is there possible my network admin can watch my browser history
View 1 Replies
View Related
Jun 29, 2011
I have a lap top that someone else uses, is there anyway I can set some setting that erasing the history is not an opinion?
View 1 Replies
View Related
Oct 6, 2011
If I loose bookmarks on my Browser, can I contact my ISP for a log to my internet history?
View 7 Replies
View Related
Jun 5, 2013
I'm running a cisco 891 with ios Version 15.2(4)M3 ,now I have a dialer 0 interface with fast0 and 1 as well, all is working fine.now I just read about the new sh int 'INT' history feature but when I do it I get nothing.. not a graph or anything I get just nothing as if I just hit enter.anything I need to do to enable the feature?,if I do a sho proc cpu history that works just fine but not the sh int XYZ history commands
View 2 Replies
View Related
Nov 13, 2011
Having worked abroad, will my internet history be visible to IT when I reconnect my laptop to the company network?
View 2 Replies
View Related
Aug 11, 2011
how to track webhistory of a particular system using its ip address...can i remotely monitor the systems webhistory using its ip address.
View 5 Replies
View Related
Oct 10, 2011
How can i monitor users web and URL history with monitoring utilities?i am using solarwinds orion but i don't know how can i monitor web and URL histories.does this software have this ability or not?
View 6 Replies
View Related
Jun 20, 2011
Privacy in the web, I have a new laptop and I want to know if my verizon router will store my browsing history if I use Incognito mode or privacy mode? Because I don't need people seeing what I was doing.
View 1 Replies
View Related
Dec 21, 2010
I was wondering if the ASA 5520 Firewall had the ability to view web traffic or site surfing or does this only work if I have a logging server configured for the ASA to log to? I don't use the ASA much since I'm the database administrator for my company but from time to time I'm asked when nobody else is available. I just checked the ASDM & see that the buffer clears after so many lines & I don't believe we've got a logging server.
View 2 Replies
View Related
Jan 30, 2012
I'm both concerned and pissed off that my creepy housemate might've used our network to invade my privacy, steal expensive multimedia & valuable personal info, and may have continued access to my computers. I have a Win7Home laptop and a Win7Prof desktop. Both have a Windows password.I was attempting to back-up files from my laptop to my desktop ~2 weeks ago, so I created a Shared Folder and put files in there. After the copying was done, while I was moving the folders from the Shared Folder to a private folder on my desktop computer, there was an error message for one of the folders, saying it was open in another window... this was strange, since it definitely hadn't been opened within weeks by me. But it resolved immediately (like they got alerted). And of all the folders, it's one which my stalker roommate would def be interested in.
Also, I recently noticed that there are Remote Desktop Connection icons on both my computers (with "Allow" checked on laptop only). They were created 49 seconds apart, that NEXT morning. They reside in the same parent folder as where the shared folder resides (Documents folder on laptop and a Partition on the desktop). It is possible that I created the RDCs by accident while amateurly trying to network the my PCs, or could they be offspring from a trojan/DLL file which was placed in the Shared folder by my creepy roommate...? As "admin" over our router, would he have been alerted to the fact that I shared a folder? I'd enabled "Home" network and discovery for my computers. Could he access other NONshared folders if my computer was visible? Can router admins view a window that can constantly track network computer activity?
View 1 Replies
View Related
Feb 25, 2013
How to clear history of cisco ASA 5520 ?
View 1 Replies
View Related
Mar 2, 2011
We are using the ASA 5520 as Firewall and VPN gateway for remote access by employees and vendors. Is there a way to view a history of VPN user logins? We used to have (or we still have but no longer using it) th CVPN 3005. This device keeps log files of all activities. I miss having this capability in the ASA 5520.
View 4 Replies
View Related
Nov 21, 2010
Our enterprise uses a VPN Concentrator 3000 for our VPN access. Is there a way to view a log history of what user connected to VPN and what IP address they were assigned? It would be for 2 days ago which was over the weekend.
View 3 Replies
View Related
Aug 29, 2012
I want to do something with IP SLA and started by estabilishing a baseline.
I'm trying to check history on an ASR. I tested same config on a 3845 and was forgetting the "history filter all". After this I could see history table on 3845 but still history is empty on the ASR1006. The operation started because I can see information with "show ip sla statistics".
know if i missed something or maybe this is not supported in ASR1006?
re-ld-tcc-02_ASR1006#show vers
Cisco IOS Software, IOS-XE Software (X86_64_LINUX_IOSD-ADVIPSERVICESK9-M), Version 15.2(1)S2, RELEASE SOFTWARE (fc1)
[Code]......
View 5 Replies
View Related
Sep 4, 2011
Can devices that share a router have access to each others internet history? Can one device affect another device that also uses the router?
View 3 Replies
View Related
Feb 18, 2013
How do I find internet history on my Netgear 6300 router?
View 4 Replies
View Related
Mar 28, 2011
I'm using wireless iternet supplied by my roomate. They have the router and service, and have given me code for use on my computer. How do I hide my web history in a way that at least they don't know what it is if seen?
View 2 Replies
View Related
Sep 9, 2012
How can i check the website history in router?I want to know the website which the user explored through the router.
View 1 Replies
View Related
Mar 13, 2012
I am doing troubleshooting of the wireless connection problem.
<Environment>･WLC 7.0.116.0 is used together with WCS and MSE. ･Lightweight APs (3502i) are connected to the controller. ･It attests a radio client by WPA2-PSK.
The status of the client when not connected with wireless LAN was frequently displayed as follows by Location History.
State1:802.11 State : ProbingIP Address : blankMAC Address : blankAuthenticated : No SSID : blank
State2:802.11 State : AssociatedIP Address : 0.0.0.0 (In practice, Static IP is set up.)MAC Address : XX:XX:XX:XX:XX:XX (expected)Authenticated : No SSID : XXXX (expected)
What is the cause of problem which is assumed in each state of State1 and State2?
View 4 Replies
View Related
Apr 22, 2013
How to see the ipsec vpn client users login history, they are authenticating to the local AAA, not to active directory. I am able to see current login session. by going to monitoring vpn statistics sessions this shows me current sessions but I would like to see for example logins for vpn client for the last month.
View 11 Replies
View Related
Sep 30, 2012
I need to make a report of the VPN history on an ASA 5510 and I cannot find a way that fast.
View 1 Replies
View Related
Mar 5, 2013
I am currently using ASDM v6.4 and would like to enable the historic metrics feature to view/produce graphs/tables for interface using the Last 5 days, every 2 hours option. how this will impact performance and storage space on the device?
View 1 Replies
View Related
Oct 23, 2011
I recently installed a very basic version of XP on my old laptop (Gateway MT3707).After hours of searching for the correct drivers, I found them, and installed them. After installing the correct drivers for wireless internet I was able to pull up the list and find my network on it.When double clicking on our wireless network it asks for a network key (also called WEP key or WPA key).Now we have a password for our network, but after an exhausting amount of tries that won't work. I not sure if that is what its looking for. In our apartment we run mac OSX, windows vista, etc., but usually the password for the network is satisfactory. I have never ran into this problem.I hate to be a noob, but I don't know where to go from here.
View 6 Replies
View Related
Aug 30, 2010
I have a problem with cpu high.tell me if normal have this process?
CPU utilization for five seconds: 29%/0%; one minute: 29%; five minutes: 30%
PID Runtime(ms) Invoked uSecs 5Sec 1Min 5Min TTY Process
29 198216576 402619350 492 15.83% 15.87% 15.68% 0 Cat4k Mgmt HiPri
30 175197296 96703435 1811 10.23% 10.10% 10.64% 0 Cat4k Mgmt LoPri
Cisco IOS Software, Catalyst 4000 L3 Switch Software (cat4000-I9S-M), Version 12.2(25)EWA14, RELEASE SOFTWARE (fc1)Technical Support: [URL] Copyright (c) 1986-2008 by Cisco Systems, Inc.Compiled Tue 20-May-08 18:49 by chendahImage text-base: 0x10000000, data-base: 0x114BE208
ROM: 12.2(31r)SG2Dagobah Revision 226, Swamp Revision 34
System returned to ROM by reloadSystem restarted at 00:36:52 UTC Sat Dec 10 2011System image file is "bootflash:cat4000-i9s-mz.122-25.EWA14.bin" cisco WS-C4506 (MPC8245) processor (revision 10) with 262144K bytes of memory.MPC8245 CPU at 266Mhz, Supervisor II+Last reset from Reload1 Virtual Ethernet interface144 FastEthernet interfaces2 Gigabit Ethernet interfaces511K bytes of non-volatile configuration memory.Configuration register is 0x2102
View 1 Replies
View Related
Apr 7, 2011
is there any method on the asa 5510 let u see the history of the remote access vpn connection for the last week
View 6 Replies
View Related
Oct 26, 2011
1. How to check the history alarms in Router 7609?
2. How to check whether an Interface was down?
View 1 Replies
View Related
Oct 12, 2011
For some reason I am unable to retain the system message logging and config archive references after a reboot of the router. I need to be able track config changes and retain the ability for the customer to recover the original config should they destroy the config through any misguided fiddling on their part. There is no remote management and these router need to be recoverable. I know this used to configured by default on earlier routers as I've checked on teh ones we have, but checking through the configuration has not worked and i have everything configured the same but system messages are still lost on reboot. Im using Cisco 3845 running IPbase 12.4(3) and the config i have is shown below.
Logging buffered 4096 debugging
no logging console
!
!
Archive
Log config
Logging enable
Logging size 100
Notify syslog
Hidekeys
Path flash:archive-config
!
Logging history size 200
Logging facility local6
View 2 Replies
View Related
Mar 2, 2011
Having some serious problems on the networking front here at home. I have 3 PC's and 2 Xbox's that run constantly. Our Internet bandwidth is Insight's 50.0 which is 50Mb download speed 5Mb upload speed. The problem we're having is this. Ever since we upgraded from dual 20Mb lines on a Cisco RV042 to a 50Mb on a DIR-655 we've been having latency issues. I have everything turned off in the router. It's basically there to give out IP numbers and thats it. All security is handled from the PC's themselves. Bandwidth tests are fine, I sustain download speeds above 7MB/s using download managers. But pings are terrible. Xbox live is terrible, PC online gaming is terrible. Pingtest.com is terrible. Only when behind routers. I've tried it behind 3 seperate routers. The DIR-655, the Belkin f5d8236 that insight provided me, and the cisco rv042 originally used for dual wan routing. all of which are met with serious failure.
If I plug directly in to the modem pings are fine. Add a router and pings go to shit.
View 14 Replies
View Related
Dec 19, 2011
I just upgraded to the Belkin N750 DB router from the version just below it and couldn't get the wireless card (Ralink RT2760) in my daughter's dual-boot WinXP/Ubuntu 10.04 to connect to the WPA security setting (WEP only) on the Ubuntu side. There is an updated driver, but it's way above my Linux skill set, so instead I just disabled security completely, and used the MAC Address filtering to add all of our household devices.This solved her connection problem, but I am wondering if there is any danger to this method that I might not have considered
Originally Posted by BelkinMAC Address FilteringThe MAC Address Filter is a powerful security feature that allows you to specify which computers are allowed on the network. Any computer attempting to access the network that is not specified in the filter list will be denied access. When you enable this feature, you must enter the MAC address of each client on your network to allow network access to each. To enable this feature, select "Enable MAC Address Filtering". Next, enter the MAC address of each computer on your network by clicking "Add" and entering the MAC address in the space provided. Click "Apply Changes" to save the settings. To delete a MAC address from the list, simply click "Delete" next to the MAC address you wish to delete. Click "Apply Changes" to save the settings.
View 8 Replies
View Related
Nov 14, 2011
Setting up Web Filtering on Cisco881 sec K9 router using CCP.
At the moment every user on the domain got blocked by the rule that i set up on the Web Filter (just using the wizard and choose default category). What i want is to separate users so that specific user can have full access while other user get filtered by the category.
And Yes I want to configure this using CCP.
View 3 Replies
View Related
