I am currently using ASDM v6.4 and would like to enable the historic metrics feature to view/produce graphs/tables for interface using the Last 5 days, every 2 hours option. how this will impact performance and storage space on the device?
View 1 RepliesRunning an ASA 5500, and using ASDM to connect. I need to view the historical metrics in graph form for traffic overview, that is shown on the firewall dashboard. I have enabled historical data, but all I see the 5 minute intervals.
View 4 Replies View RelatedHow to see the ipsec vpn client users login history, they are authenticating to the local AAA, not to active directory. I am able to see current login session. by going to monitoring vpn statistics sessions this shows me current sessions but I would like to see for example logins for vpn client for the last month.
View 11 Replies View RelatedI have two 2911 routers running 15.0(1)M4 in a redundant topology connected to an ASA 5520 firewall running 8.4 version. All gears are running EIGRP. In order to distribute the incoming traffic between the two 2911 routers, I am using 'offset-list out' on them, but in the ASA's routing table I see updates from both 2911 with the same metric, i.e. the offset-list is not working. What are the default metric weights on ASA? How can I change them? I couldn't find any known bug.
View 14 Replies View Relatednat global entry not showing up in ASDM but it does via CLI see blow, it's a policy NAT.
nat (inside) 5 access-list inside_nat_outbound_4
global (outside) 5 ************-OUTSIDE netmask 255.0.0.0
Global 5 doesnt show in ASDM 6.1 (5) the globals only go up to 3
How to clear history of cisco ASA 5520 ?
View 1 Replies View RelatedI was wondering if the ASA 5520 Firewall had the ability to view web traffic or site surfing or does this only work if I have a logging server configured for the ASA to log to? I don't use the ASA much since I'm the database administrator for my company but from time to time I'm asked when nobody else is available. I just checked the ASDM & see that the buffer clears after so many lines & I don't believe we've got a logging server.
View 2 Replies View RelatedI need to make a report of the VPN history on an ASA 5510 and I cannot find a way that fast.
View 1 Replies View Relatedis there any method on the asa 5510 let u see the history of the remote access vpn connection for the last week
View 6 Replies View RelatedI have a ASA 5510 firewall with CSC module and Security Plus license for CSC module.Will you tell me how to configure my firewall to send emails to particular mail ID when someone login into the firewall or any virus attacks from outside.
View 6 Replies View RelatedI'm having a problem with an ASA 5510 and software from Manage Engine (Firewall Analyzer). They are saying that sys log 113019 is not getting data over to the server where the firewall analyzer is installed. I'm checking the config and I see it enabled. Why this particular sys log info isn't making it to the reporting software when other data is.
View 4 Replies View RelatedWe are currently monitoring approximately 50 locations each having one or more cisco devices, Catalyst 3750 and 3560.Locations are connected via CWDM.We would like to monitor interface errors, signal loss and power on CWDM SFP transceivers on Catalyst 3560 and Catalyst 3750 switches. We tried to get these values (as shown using „sh interface transceiver“ command) using SNMP but we didn't get any SNMP result. What MIB or other functions/ modules/ features need to be used/activated on switch?Do we need any additional piece of hardware?
View 25 Replies View RelatedI currently have an ASA 5510 unit. I have a dmz setup which house some web servers and an inside interface. The web servers contain multiple public ip addresses which I have natted and access is fine.What is the most simple way to enable ping for my dmz from the outside. Meaning if someone outside the network pings one of the servers by its public ip address I would like it to respond to ping.
View 1 Replies View RelatedI enable the IPS on the 2911 router . I am using the Basic IPS signatures that are inbulid on the routers . But sill it showing , that no signature is active .
ip ips signature-category
category all
retired true
ip ips signature-category
category ios_ips basic
retired false
[code]....
I am getting this error on my PIX 535 with 8.0.4 code. The error is b Error : OSPF/RIP cannot be enabled on failover interface, I am getting this error while trying to enable RIP on the firewall. The context is single mode and failover is enabled. When I am disabling the failover the Firewall is accepting the RIP configurations.
View 1 Replies View Related=>Routing Protocol in Question EIGRP.
=>Two equal metric routes for destination A(through R1 and R2-SVIs on two upstream 6500s)
Traceroute Output, is the output that alternates between 1.1=>10.1=>1.1 normal granted the two routes are "equal metric routes for the same routing procotol in use" or is that "round robin behavior" indicative of a routing problem?
I would like to configure an ASA5512-X in firewall transparent mode, but I am having trouble getting ASDM to lauch when I do.
I have created a BVI interface with an IP address, and I hve enabled the mangement interface, but ASDM does not lauch when I enter the IP adress of the BVI I created.
Apprently you need to use the bridge-group command to assign an interfce to a bridge group. When I enter this command at the (config-if) prompt for Management 0/0, this command is not recognized.
What are the general steps for configuring the management interface to be able to launch ASDM in transparent mode?
I would just like to to open UDP port 123 in the ASA 5510 Firewall so that our Primary Domain Controller could use this port to sync time with an external time source. We have already added an access rule for this port under the firewall configuration in ASDM 6.4 and this port was also allowed in the inbound and outbound rule of the PDC's Firewall but it seems that it was still blocked.
View 23 Replies View RelatedI have an ASA 5510 in a live environment. Up til a short while ago I could access this via the ASDM and ssh. However I can no longer connect to it via eithier. When I access It via SSH I get a disclaimer saying the following
*** You have entered a restricted zone! Authorized access only!!! Disconnect immediately if you are not authorized user! ***
It then cuts me off.
When I try to access the ASDM I get the following
The firewall is running all its services without a problem and I can ping the device without any issues. Also none of the config (to my knpowledge has been changed). I set up a console session and http server enable is still there with
http 192.168.200.0 255.255.255.0 inside
After enabling AAA FWSM lost opportunity telnet session. FWSM version 3.2(5). In the logs show that resets itself FWSM telnet session.
Conf.,aaa-server TACACS+ (management) host 192.2.151.111
key aaa authentication ssh console TACACS+ LOCAL
aaa authentication enable console TACACS+ LOCAL
aaa authentication telnet console TACACS+ LOCAL
[Code] .....
We've got a proyect that requires a few thin clients to connect to a remote PCoIP server.
Looking to the documentation, the only port required to be open through Firewalls is TCP/UDP 4172, however, we've seen (making interface captures) that it somehow also uses ESP (IP protocol 50).
We've got a static NAT translation translating those thin clients to a public IP address, we've created ACLs to allow inbound (shouldn't be necessary as our user is connecting to a remote server) and outbound traffic for TCP/UDP 4172 and ESP and I cannot make it work.
I've also enabled IPSec pass-through Inspection to no avail.
how should we configure our ASA to enable this kind of traffic?
I am trying to implement Microsoft LDAP server with our ASA 5520. The client is using Cisco VPN client and when I am trying to connect I am receiving the following error message:
"Secure VPN connection terminated locally by the client. Reason 413:User authentication failed"
I triggered the debug on the ASA 5520 and everything looks fine .The LDAP server is sending the right information without any error message.
Googled this error message and I found that I need to enable the simultaneous logins to enable. I enabled it but I got the same error message. This configuration is under remote access vpn>group-policies>General>more options.
I have a ASA 5515-X-IPS firewall and I want to communicate firewall through ASDM-IDM. Already done the below procedure;
•1. Connect cable to Management port.
•2. Open browser and type https://192.168.1.1/asdmin and download the ASDM-IDM Launcher v1.5(55) and install my laptop(OS: windows 7)
•3. Connect asdm-idm launcher we put IP Address: 192.168.1.1 and username, password enter.
Just whenever we login the wizard then the message shown “ Unable to connect the asdm manager”For your kind information we already setup jre6u7 java software.
enabling traffic between interfaces on the ASA 5510. Of course I have an outside interface E0/0 and an inside interface (E0/1) for normal operation. The idea was to enable one of the remaining interfaces on the 5510 to attach an internal network resource to for management in case we lost our switch. I am using E0/0 as the outside interface and the inside interface is E0/1. I am wanting to attached a management device on the same inside network IP address range for simplicity. I have E0/2 configured for the same security level (100) as the other inside interface and I also have enabled same-security-traffic permit inter-interface as well but I still cannot access the device on that port. Is there something else I am missing? I guess the best way to explain this is that I want ports E0/2 and E0/3 to act like a "switch" so to say...... The ASA 5505 lets you do this pretty easy but having trouble on the 5510.
View 4 Replies View RelatedI am getting this error on my PIX 535 with 8.0.4 code. The error is Error : OSPF/RIP cannot be enabled on failover interface, I am getting this error while trying to enable RIP on the firewall. The context is single mode and failover is enabled. When I am disabling the failover the Firewall is accepting the RIP configurations.
View 2 Replies View RelatedI have just logged into the ASDM for my 5520 and can see under the "Firewall Dashboard" tab that I can enable these graphs/stats, why would they be disabled? So I was wondering if I enable these and they use alot of memory how can I disable them again?
View 3 Replies View RelatedI have just logged into the ASDM for my 5520 and can see under the "Firewall Dashboard" tab that I can enable these graphs/stats, why would they be disabled? So I was wondering if I enable these and they use alot of memory how can I disable them again?
View 1 Replies View RelatedI can get to the untrusted certificate on https....coming from my address 192.168.133.205..but i get denied am i being denied by access list?..I dont see how since intital SSL begins..
these are the log from the ASA---10.11.24.11 is the ip of one of the contexts
interface GigabitEthernet0/1.124 vlan 124 nameif Inside security-level 100 ip address 10.11.24.11 255.255.255.0
http server enablehttp 0.0.0.0 0.0.0.0 managementhttp 0.0.0.0 0.0.0.0 Inside
Mar 22 2010 16:05:34: %ASA-6-725001: Starting SSL handshake with client Inside:192.168.133.205/24368 for TLSv1 session.Mar 22 2010 16:05:34: %ASA-6-725003: SSL client Inside:192.168.133.205/24368 request to resume previous session.Mar 22
[Code]....
I've configured a couple of ACL rules via CLI in my ASA. When i checked in the ASDM, it only shows the basic rules that was configured by default and did not show the rules that i've created.
View 6 Replies View RelatedI have recently upgraded ASA to 8.4 and found that ASDM is not working on it. I tried the latest ASDM version 7.1 still no luck. When I try to access ASA using IE...it just shows " Page can not be displayed "
Following is the config which I have
http server enable
http 0.0.0.0 0.0.0.0 inside
http 10.52.193.218 255.255.255.255 inside
asdm image disk0:/asdm-711-52.bin
asdm location 0.0.0.0 0.0.0.0 inside
asdm history enable
Is there anything else required in ASA 8.4 for ASDM to work? When I telnet to ASA interface with 443 port it works
im working on a small project on a asa 5505 and beacuse i do most of the work from the outsidei want to open up asdm without vpn.
i have it working on another asa and the only difference is the rom version.the one not working is 8.0(5) - 6.2(3) and the one working is 8.0(4) - 6.1(5) did they do some changes?
ASDM cannot be loaded. Click OK to exit ASDM. Server returned HTTP response code: 503 for URL...
I'm attempting to access the ASDM externally (where x.x.x.x is the external IP). I was able to access 3 days ago just fine. So far, I've found suggest a reboot.
ASA Version 8.2(1) - I think the ASDM version is 6.2
I was going through the release notes on cisco website of ASA 8.4.6 and ASDM 7.1.3 but I just can not find a definitely answer: if ASDM 7.1.3 can run with 8.4.6?
View 2 Replies View Related