Can't Connect To Internet - Make Sure Protocol Bindings Are Correct?
Sep 6, 2011
When I try and connect to the Internet, it doesn't connect. Windows Network Diagnostics give me this message:"There might be a problem with one or more network adapters on this computer- The network adapter "Realtek RTL8102E/8103E Family PCI-E FE NIC" is experiencing driver or hardware related issues- Make sure your Internet Protocol Bindings are correct. Also, I took a look at my Device Manager and there seems to be a problem with almost every one of them.
View 1 Replies
ADVERTISEMENT
Nov 1, 2012
I made the unpleasant discovery recently that all my corporate laptops are using the wifi network even when sitting on their docks or otherwise connected to the wired network. Most of them have intel wifi cards, and the proset software allowed me to disable-by-policy wifi if a lan connection is detected.Some, however, have a more generic wifi card that doesn't have fancy management software, leaving me with the default windows stuff.In an attempt to correct the problem I
a) Put Local Area Connections at the top of the Adapters and Bindings list
b) manually assigned cost metrics to the connections in the tcp/ip settings
View 4 Replies
View Related
Nov 9, 2003
I have Centrino notebook, a Dell 600m. Most of the time I use WiFi with this notebook to communicate with the Internet and my desktop. However, when I want to backup my notebook to the desktop hard drive I prefer to use the 100 MBps speed instead of the 11 MBps speed of WiFi. I have setup the connections order in the Adapters and Bindings tab in the advanced menu item in the Network Connections such that the Local Area Connection (100 MBps) it above the Wireless Network Connection (11 MBps). Well, when I enable the Local Area Connection and plug it into my hub, a second little notification icon shows up in the indicating that the 100 MBps connection is active. When I perform the backup, both the wireless and wired connections show activity. Upon further investigation, I have found that data leaving my notebook is going via the wired connection data going to my notebook is using the WiFi network. Why is this and how can I have it use the wired connection for both upload and download?
By the way, I am using the built-in Windows XP networking software and am not using the Intel software.
View 7 Replies
View Related
Apr 14, 2011
I am trying to connect to a preferred wireless network. The signal strength is good, and I know for sure that I have the correct username and password.It accepts the password, tries to connect, and then....nothing. I don't get any sort of message explaining why. It just tries to connect to the wireless network, then can't. It keeps trying but I never get to connect, it just says ''acquiring network address'' , and then goes back to nothing.
View 8 Replies
View Related
Jan 18, 2012
we purchased a new Toshiba laptop recently w/ win 7 OS and we cannot connect wireless to router using verified password. all other laptops, computers, LCD, etc. connect with no issue. we are using N response and WPA2 security settings. we have changed security from personal to auto with no success. we have also changed settings from tpik and aes - no success. we have verified the password several time to make sure and we also tried a friend's laptop running win 2000 OS and it connected perfectly with password. the strangest thing is that we managed to connect the new Toshiba wireless (secured) at our friend's house eliminating the thought of an issue with the laptop. we upgraded the firmware to the lastest version and that did not solve issue. the new laptop sees the network router and request password but, cannot authenticate to connect
View 8 Replies
View Related
Jan 26, 2013
I am encountering a problem with location of website i.p address and its port
[code]...
View 4 Replies
View Related
Oct 12, 2011
I want to know why all my wifi client connect only in G protocol, even if the wireless card supports N, even if all the AP in one of my buildings is AP3500. In the WCS config for my two WISM controller the 802.11a network status is disable, the 802.11n network status is enable and the 802.11b/g Network status is enable and 802.11g support is enable. even in that part of config the 802.11n is enable.
In the High throughput 802.11n section all the rates is check to be supported.
What config I'm missing to get my 802.11N client to get connected with this protocol and not on G protocol.
View 2 Replies
View Related
Mar 22, 2011
The IP defined in RFC 791 was the first widely-used version of the Internet Protocol. Interestingly, however, it is not version 1 of IP but version 4! This would of course imply that there were earlier versions of the protocol at one point. Interestingly, however, there really weren't. As I mentioned above, IP was created when its functions were split out from an early version of TCP that combined both TCP and IP functions. TCP evolved through three earlier versions, and was split into TCP and IP for version 4. That version number was applied to both TCP and IP for consistency.url... what i wanna know s in tat underlined line its given 3 versions of TCP what r they?
View 2 Replies
View Related
Jun 23, 2011
I have a PPTP VPN server (WIndows 2008 R2) sitting behind an RVS4000, I have port forwarding for 1732 on and the client's (Windows 7) can reach the VPN server but cannot complete the connection due to an 806 error, which is GRE traffic related. I have PPTP passthrough on and have also created a ACL entry for PPTP traffic. I've seen many posts on this topic over several years with no solutions, and I do have the latest firmware (Version:V1.3.3.5). This is also definetely router related as I have absolutley no problem connecting when I point directly to the VPN server by internal IP address.
View 1 Replies
View Related
Aug 11, 2011
I configured dot1x on my swicth 4500 series, Here is the interface configration:
interface FastEthernet3/2
description Test dot1x
switchport mode access
load-interval 30
authentication event fail action authorize vlan 800
authentication host-mode multi-host
authentication port-control auto
[code]....
When I remove the port-control configuration on the interface, the status change to UP/UP.
View 1 Replies
View Related
Jun 24, 2011
I am using a cable company called Cox.net for the internet. The cable modem is Motorola brand.Sometimes, the modem got disconnected due to outage in my area. But after Cox fixed the outage, I have to reset the modem. The problem is I do not know when the outage is fixed. Sometimes, I reset the modem and call cox all day long. Is there a modem which can reset itself after there is the internet signal?The second question is my desktop pc, which connected to the wireless router through a cable, sometimes displays a error page in IE8 (Internet Explorer). At the same time, the laptops using wireless can view IE8 pages.I think what happened is there is a internet signal outage in my house but the laptops got re-connected to the internet automatically and the desktop did not re-connect. Sometimes, I can ping a website on the desktop but I cannot see the pages in IE. Re-open IE does not fix the problem. The solution is to re-boot the pc. Is there a network card or software I can use to re-connect to the web after the internet signal becomes available? My pc's mother board has the network device to plug in the cable. The brand is Gigabyte.
View 2 Replies
View Related
Jul 30, 2012
i have a 3g sraight talk phone and ran out of min, can i still connect to someones internet?
View 1 Replies
View Related
Feb 12, 2013
I'm a college professor and was assigned a new course called Distributed Operating Systems. I'ts new material for me. And in research for class I have found that several machines can be connected together to build a bigger computer like a supercomputer. How could I connect several PC's and make them work together like parallel computing, o something likea super computer?
View 3 Replies
View Related
Sep 4, 2012
Wanted to know how i could make my usb internet dongle into a wifi device, so that i could use the same usb internet connection on other devices VIA Wifi
View 3 Replies
View Related
Aug 20, 2011
I want to know that how to make a usb internet through dsl connection.
View 3 Replies
View Related
Jun 28, 2011
I have a Motorola Affix and am using the app printershare to print from my phone to a network printer at home.. it works great.. but I want to know if there is a way to make the printer accesable from the internet so I can print from pt phone when im not home and connected to the network...accessible
View 2 Replies
View Related
Nov 25, 2011
I am connected to the internet, but the only thing that I am able to connect to are TeamSpeak servers, Avast Updater and Window Updater. No browsers or other types of software can make connections.
View 3 Replies
View Related
Oct 26, 2011
how can i make a 2 km wirless network for dsl internet. my friend lives 2 km far from my home,he has a dsl connection.but there is no facility of dsl availble to my side.how can we make a wireless network?
View 3 Replies
View Related
Sep 15, 2011
I am using my LAN Connection for file sharing and internet on my Office Pc (Windows XP). I have a wireless external adapter (Alfa) which I use for WAN Connection. But my PC doesn't use the internet from WAN Connection till I disconnect the LAN Cable. I want to use LAN Connection for file sharing and database in the office only and Internet on WAN Connection.
how can I make the WAN Connection as default and to guide the OS to use this while the LAN Cable is still plugged in. I am using AVG Internet Security 2011 & it's firewall.
View 2 Replies
View Related
Jan 1, 2012
How to make my internet connection becomes faster?
View 5 Replies
View Related
Jun 8, 2012
Would it be possible to make a printer accessible from internet? Need to print a lot of batch printing from my cloud application , in that case can we direct this print job to a specific printer over internet ?
View 1 Replies
View Related
Jan 3, 2012
My BOSS have a iPhone 3GS. He tells me that iPhone wireless connect to his home AP. Why he has to input password everyday whenever he first time wireless connects to WRT54G at office. What should I do for my BOSS to wireless connect to WRT54G without input password everyday? By the way, I set wireless security as WAP2-personal AES.
View 1 Replies
View Related
Nov 18, 2011
My Internet is very slow, It makes me impatient, I can't stand waiting and I'm afraid to do some stupid clicks.
View 4 Replies
View Related
May 25, 2012
I am completing a project as part of my 2nd year studies and I am at the stage of testing on the network but before I go ahead with this stage, I would like some feedback on what I could do to make my network more efficient and secure.passwords are: ciscothe link is the packet tracer file I am working on.url
View 6 Replies
View Related
Nov 26, 2012
It seems like my internet connection constantly disconnects and I have to restart my computer to get it to work again. I don't think its the internet connection because I've lived in 4 different apartments and this has happened. I'm having to restart my computer at least 4 times a day.Another thing I wanted to add is that it especially happens when I do something that is 'internet intensive' such as youtube or when I am using skype or msn video call.
View 1 Replies
View Related
Jan 4, 2012
I dont know how to set this Netgear router to make my internet wireless
View 1 Replies
View Related
Mar 23, 2011
Imagine MPLS network. Total of 4 sites.
HQ-HUB is the only site with access to the Internet.
So if Site1 or Site2 or Site3 need to access the Internet, traffic will have to go through HQ-HUB and from there reach the Internet.I have routes 2851's on the spoke sites. Which command or mechanism you would explore in this case to make the spoke sites point to the HQ-HUB to reach the Internet?
Would you do this based on DNS settings or getting an access-list & static route defining when the spoke routers traffic need to go the internet, point to the HUB-HQ as the default?
View 3 Replies
View Related
Mar 2, 2013
How can I make my Latitude E6400 connect to my wireless system at start up and stay connected when switching users?
View 1 Replies
View Related
Dec 8, 2011
-I have a 10 mbps subscription.
-I use a router and connect two pcs on it,they use internet at the same time.
Q:will the speed be 5mbps on each computer? if so,is there a way to make it 10mbps each while they are both using the internet at the same time?
View 4 Replies
View Related
Sep 30, 2011
I'm currently switching from a certain internet provider to another and I'm forced to get another router. What I wanted to do is since the initial router has to be on the first floor, I'd like to have the second one on the top floor closer to my computer whereas they would share a dedicated connection between each other wirelessly so it would make my connection faster rather than just having my pc connect directly wirelessly to the initial router on the first floor. Is that possible?
View 4 Replies
View Related
Feb 15, 2013
My question is how can i turn this adapter that i get internet from for my desktop INTO wifi so i can use my tablet?right now the desktop is the only computer with internet since it has an adapter.what do i need to make a WIFI signal from the computer? is there a usb stick or router i can buy?
View 2 Replies
View Related
Feb 6, 2013
Can I make my old XPS 210 wireless internet with either a card or an adapter? If so, which ones.
View 1 Replies
View Related
Jul 13, 2012
Canon T3i hooked up to a laptop running ExtraWebcam and Yawcam.Yawcam running an HTML and Stream output to the network/web.I would like people to be able to access that video from the [the internet + network or internet or network] (those are the options/possibilities and the order in which I'd prefer).I am able to get people to access it via the network, but not the net. I'm using my Samsung Galaxy SIII on Sprint to tether (obviously not tethering if I'm only going to the network). Unfortunately, not only can I not access the stream via the internet, I can't even ping the phone.I'm pretty sure I need to open up/forward some ports, but I understand that that's not possible seeing as it's Sprint's network and not mine.
I will also have access to a local wifi network if there's a way to 'piggyback' off of that for web access to the stream even if I don't have access to the router control panel. I'm not sure if I'll have a hard wire connection to a router or not. I can, however, change the ports that the stream is set to.(also, I can bring a separate wireless router to connect to my tethered computer to open up the internet enabled stream to the network?)Given a laptop with a wifi card, a phone that can tether, a wifi network, and, if necessary, an extra wireless router, how can I stream from Yawcam and make it available to the internet if I DON'T have access to the wifi network's port forwarding? Note that I CAN edit the ports in Yawcam.
View 1 Replies
View Related
