What is the best way to add more ethernet ports to my router? Is it to daisy chain a hub /switch to it? I'm all out and I often work on many computers at a time. Currently I have the cable modem, my computer, printer, one spare for computers I work on, and one to vonage modem. I would like more available for computers that I work on so I can hook up at least one more.
View 5 RepliesHere is the current logical routing path of the network I've inherited:ISP_ASA_1800 --- P2P link_ LAN, However, the equipment is setup up in this inefficient physical topology: Internet_ASA_LAN switch --- 1800 --- P2P link_LAN, The 1800 is the default gateway for all LAN hosts. This means that all traffic not destined for the LAN goes first to the 1800 which has routes for the Internet and for the P2P. If traffic is destined for the P2P, this is no problem. If traffic is destined for the internet, then in my opinion this is an inefficient routing path because the traffic ends up doing this:LAN host > switch > 1800 > back to the same switch > ASA > Internet, So I am thinking of setting up the physical topology to match the logical topology like this:Internet, ASA_1800 ---- P2P link_LAN switch_LAN hosts This means I will connect the 1800 and ASA directly to one another. Am I on the right track? Is this the best way?
View 4 Replies View RelatedI am completing a project as part of my 2nd year studies and I am at the stage of testing on the network but before I go ahead with this stage, I would like some feedback on what I could do to make my network more efficient and secure.passwords are: ciscothe link is the packet tracer file I am working on.url
View 6 Replies View RelatedLooking for the most efficient setup of my home network. I recently bought the netgear 3700 and it has been great. I also have a trendnet green 8 port giga switch. Both of these will be located in my equipment closet.
I also have an ooma voip hub. before i did the router upgrade i had modem>ooma hub>router. Mainly had it that way since the previous router was a wrg614 and i thought the hub probably had better qos routing. I now have the 3700 infront since i think it does that. I need to learn how to setup the qos though. Problem is that having the hub after the router loses one of my 11 ports (i have pleanty now).
Will speed through the switch be as fast as straight from the router? should my netflix devices connect directly to the router or does any of this matter. [code]
This is just a general question... is there a good way to organize the ASA's access rule list to increase its efficiency? Maybe by service or hit count (Top 10). I am using the Cisco ASDM 6.2 to manage our ASA 5520.
Looking at it looks very unappealing and I'm in the process of adding names and descriptions to all the Network Objects.
How many of the 881 switch interface ports can be used as router ports, have used the 877 etc where i can use 2 but need a low cost router that supports 3 for routing. (needs to be physical ports)
View 2 Replies View RelatedWe have an ASA 5505. 5505 comes with two default vlans 1&2 with each of them marked as inside & outside respectively.My query is , if i do not want to use vlans on 5505 and only want to use the Ethernet ports as pure physical layer 3 ports, is it possible?i.e. i want to assign a layer 3 ip address on eth0/0 and eth0/1 and make them as the inside & outside interfaces rather than vlans. is it possible to do away with vlans in 5505 & will it work otherwise?
View 3 Replies View RelatedIs there a way to associate spare firewall ports with another port that is being used..For example...int gi 0/2 is being used currently for my web dmz. Its ip is 192.168.10.1..Is there a way for me to associate gi 0/3 with the same layer 2 as gi 0/2 ?
In my webdmz I use 2 ACE 4710 proxys in FT mode. I used a layer 2 switch to connect firewall and proxys together.
I would like to eliminate this switch if possible..and connect both 4710's (layer 2) direct to firewall.If I could make gi0/2 - 4 part of the same vlan, then I would be good to go.
One of techs accidentally connected two access ports from different switches together. Since then, LMS is alerting them as being Link ports down. I tried to default the config and set them to access ports without any success. what I should do in LMS to recognize them as access ports?
View 2 Replies View RelatedRouter 1
Cisco EPC2420
192.168.1.1Connects to ISP via F-connectorConnects to Router 2
Router 2
Asus DSL_N55U
192.168.1.2Connects to 192.168.1.12(Linux Server)
So I bought router 2 but since it doesn't have an F-connector input I need to keep router 1 in the infrastructure so I can connect to the internet.The port forwarding on router 1 is a limited list so I can only add so many rules and would rather have my router 2 do this as it alot better but i cannot seem to get it to work.So I set a rule in router 1 to forward all ports to router 2 and then setup the port forwarding in router 2 to send port 22 to my linux box but it didnt work.
Can a wireless router be plugged into one of the ports on a wired router?I use a wired router and won't use wireless router because of security concerns. However, I am putting a PC in another part of my house. This PC will have limited types of usage - and security concerns will not be an issue for the type of use that machine will have.Running coax across the house will be difficult. My thought was to use a wireless setup for this one machine. But that would work only if I can plug a wireless Router it into a port on my wired router.
1) Can I plug a wireless router into a wired router?
2) If the answer is yes, will that compromise security on the wired ports because the wireless router is connected to it?
Router (wired) = Linksys BEFSR41; Router (wireless) would be "G"
I had a DI 604 router and I couldn't forward ports, someone told me to buy a new router because my modem (TM602G) doesn't have a built-in router and can't be blocking it so I bought a DIR 601 with wireless and I still have the problem.I don't have any firewalls.
View 19 Replies View RelatedMy reports say that my listen ports are blocked even though I removed my router already. I've enabled these ports in Windows firewall already. Why are they still blocked?
View 4 Replies View Relatedby saying "open ports" in a router or PC or other Network System what we mean basically? what is opposite terminology, "closed ports"?-used or unused-sensitive-vulnerable or non vulnerable to attacks-exploited easily and when so may attacked and have much bad/serious consequences/results
View 2 Replies View RelatedAs we are unable to control downloads and P2P use in our network, we are thinking to block all ports except 80 and 443 in our router so that they can only browse and use them only for office use. They should also be able to use messengers like skype, YM, MSN and also download any attachments in email.I wonder if we implement this, will it going to work or will there be any problem in accessing normal websites too? I know to control downloads there are many premium hardware and software firewalls out there but we don't want to invest any thing for now.I also know PTP clients can still use 80 and 443 ports to connect but it will need user to change manually port so it's fine with us.
View 1 Replies View RelatedI have been trying to host games for some time now with no luck. I believe it is because i cannot open the proper ports. I own a Linksys BFSR41 Ver. 4 router. I have been trying to open ports, testing them on a port checker website and they are always listed as closed. I have followed the guide on portforward.com perfectly with no luck.I have disabled Block Anonymous Internet Requests.I have disabled my Windows firewall, and AVS. Still cannot open ports.I have also updated to the latest firmware. I am using Win-7 x64.
View 1 Replies View RelatedWhen i was looking for a wireless card, everyone seemed to be having connectivity issues with all of these cards, and i regularly have interference issues when the microwave is used which completely knocks off my connection. How to connect a second router as i have a telephone port in my room so i am able to connect my PC/PS3 via ethernet. Just some basic info, I'm on the O2 wireless network using their Thomson router, and i also have a Bt Homehub 2 lying about for some reason.
View 2 Replies View RelatedMy internet is running through a D-Link DIR-655 router at home it's giving me some problems at the moment.Me and my roomie both play World of Warcraft and we both have to have the ports open for updates, and it won't let me.It will only let me open the ports for 1 IP, if i try to open it for more it 'conflicts', it's only passing through the port in the router, it's not dedicated to one IP.
View 6 Replies View RelatedI am considered as a novice when it comes to networking, modems/routers etc.I have a Belkin Modem/Router, I need ports TCP 80, 2300 and UDP 2310 I think to be forwarded so I can play a certain game online (Age of Empires 3). I have tried DMZ mode for my pc and I can play the game online but only with DMZ enabled. Just some extra info.Belkin Modem/Router model : F5D7634-4A-H v2 (on the device)F5D7634-4-H v2 (01) (on the online settings (192.168.2.1))It has the latest firmware as I have clicked on the firmware update and it says "There is no new firmware update available for this Router!"
View 11 Replies View RelatedI want to open MORE than the 24 ports that the router configuration allows (DIR-615 Hardware Version: C2 Firmware Version: 3.03RU)?
View 14 Replies View Relatedcant open the ports 2300 -2400 (udp, tcp)on router. What I do isthe following.
1. Open ports on router in port forwarding.
2. Add the triggers as well in APPLICATION RULES with the ports. Triggers are 47624 and 6073.
3. Try both Dis and Enable UPNP. Even try the DMZ enabled settings.
4. Disabling firewalls on Laptop and router. Try both ways on DMZ's(enable and disable) settings on router. Check everything.
Still when I check on websites about the ports and they are shown closed (NOT STEALTH). Router uses a firmware 4.0. I have a windows 7 64 bit system. I use wireless.
Note: All the steps are performed in a combinations manner to see if there is any possibility of opening ports.
how many extra interface port can be plugged in to the 2811 router ,there are 2 fixed FE port on this router and i have 3 connection i.e one mpls link , one internet link and one sip trunk .. some body confirm me that i can insert module in 2811 ?
View 5 Replies View Relateduplink port is already being used for a wireless dlink router.....want to add wired ports via a second router
View 1 Replies View RelatedMy house is wired with Ethernet to just about every room with several connections in some rooms and its come time to expand our network. Right now we have a wireless router connected by Ethernet to a standard Ethernet router and we are experiencing problems with our network printers. While i'm not sure if it will solve our printing problems i am looking to consolidate both my wireless router and my standard Ethernet router into one single router.
View 1 Replies View RelatedI would like to upgrade my older router to a new one that I can connect my laser printer and storage via USB. I was looking at the Belkin N750, but it seems to get bad reviews. Is there another router that someone would recommend that has 2 USB ports (one for printer and one for storage)?
View 1 Replies View RelatedI'm using a linksys WRT54GS 7.2 router and I can't get any of the ports to be visible. I've set a static ip, and setup everything according to portforward.com and previous experience, I've never had to get ports to work with either this router or computer, so I can't say if it's ever worked for either. According to [URL] the connection is timing out before connecting.
View 2 Replies View RelatedHow to open udp ports on my home gateway router
View 3 Replies View Relatedhave the following set up: cable modem>wifirouter>gigabit ethernet switch>to 16 ports throughout house. When I connect a second wifi router to any port around the house, the internet does not work when connecting to that specific router, however, if I use a lan cable and connect direct with my mac or cpu, internet works fine. wifi routers are not communicating with LAN ports
View 9 Replies View RelatedSo i can only forward 10 ports on my E2000.Example, one game (Battlefield 3) requires 10 ports (TCP and UDP combined).What about my other games? how can one, if possible, add more ports to the router?
View 4 Replies View RelatedI am setting up One-To-One NAT to redirect traffic from the internet. We have 5 static public IP addresses, and I set up One-To-One Nat to redirect to local Win servers. One of the servers running Web server and FTP server. For some reason redirection works fine for the Web server, but does not work for FTP server when I try to access them from the internet. FTP server works locally, but my FTP client cannot connect from the Internet. I opened the ports in the firewall, and these ports show as opened when I test them from external servers. What am I missing?
View 1 Replies View RelatedI have a router 1802 with a several vlans with IP 192.168.x.0/24 for each vlan (x, it meaning 1, 2, 3, 4, etc.).Now I need that an IP address outside from my network (this IP it is always the same) to be access to on particular machine that is in a private network (192.168.3.0/24) through a several ports:
25 (TCP,UDP), 80 (TCP,UDP), 554 (TCP,UDP), 2000 (TCP,UDP), 10002 (TCP,UDP), 10000 (TCP,UDP), 3000 (TCP,UDP), 3041 (TCP,UDP)
How can I do it?
Outside PC ---------Internet ----MyRouter -----MyParticularPC
83.240.194.99 193.136.80.1 192.168.3.1
I am having Cisco 3835 with 2 builtin Gig ports , now We need to add two more Gig ports additionally , which Ethernet module would be recommended (model) ?
View 5 Replies View RelatedI have a bandwidth-intensive video conferencing device connected to a router. I have forwarded all the necessary ports to the device (and I have even tried DMZ) but the device is unable to connect to some servers due to "NAT issues". The device uses lots of ports simultaneously to connect and I am wondering maybe possibly the router can not handle the number of open ports. The ISP only blocks port 25 which the device does not use. Could it be that the ISP limits the number of ports that are in use? Or maybe the ISP limits the amount of bandwidth that can pass through certain ports?
View 4 Replies View Related