Cisco :: Integrating ACS 4.2 With Prime LMS 4.1?
Jan 4, 2012I am trying to populate the LMS 4.1 components to ACS.
View 2 Replies
ADVERTISEMENT
Cisco :: Integrating WCS 7.0 With ACS 5.1
Jan 6, 2011Trying the config as depicted in the WCS 7 config guide? I have tried today to integrate WCS 7 with ACS 5.1 and got a partial success. I have created a unique Shell Profile that invokes for the WCS only which contains 1 role (role0=Root) and 73 task entries (as copied from the WCS group pages) and I can log in to WCS with the new account, but some things I dont appear to have priviledges for, such as Reports. Is there any way to debug which task WCS thinks I dont have to do this?
View 8 Replies View RelatedCisco :: Migrate From Prime LMS 4.0.1 To Prime Infrastructure
May 9, 2013I'm currently running CiscoWorks LMS 4.0.1 on Windows 2003 under VMware and just got upgrade licensing for Prime Infrastructure 1.2. I am assuming that I will need to upgrade the current server to Prime LMS 4.2 in order to ensure that data migration to Prime Infrastructure goes well. I am planning to follow Cisco's recommendation to run Prime LMS and Prime Infrastructure in parallel for a time and migrate individual functions.
My real question is about Syslog handling. All of the managed devices are currently sending Syslog data to LMS. As a last step in the migration, is it possible to change the IP address of the Prime Infrastructure server to replace the Prime LMS server so that the Prime Infrastructure server will just start getting all the Syslog data, or do I need to go change hundreds of managed devices to point to a new address?
Cisco :: Link Between NCS / Prime LMS And Prime Infrastructure 4.2
Mar 12, 2013What is the relation between: cisco NCScisco Prime LMSCisco Prime infrastructure.As i orderd a Cisco Prime infrastructure from a Cisco Partner and what i got is :
x2 cisco NCS appliances
x1 DVD cisco prime infrastructure
x1 DVD Cisco prime 4.2
Cisco :: Integrating LMS 3.2.1 With ACS 5.1 In AAA Mode?
Mar 11, 2012I am using Cisco LMS 3.2.1 with ACS 5.1, actually, i want to integrate my Cisco Work with ACS 5.1 in AAA mode i already setting up the AAA mode to Cisco ACS, when i apply the configuration, i got failed as image attached.
What should i do to resolve the problem ? i have configure the ACS in Network Devices and AAA Client, i have added the Cisco Work Address to ACS, but i got the same error.
Besides, would you like to give me some explanation about the function of AAA mode Setup on Cisco Work,
is it used for User Authentication to logging in to Cisco LMS, or is it used for discovery process (Credential Information) when we want to add some devices into Cisco LMS ?
Cisco :: 2504 - Integrating WLC With LDAP Server
Aug 13, 2012I need to integrate a 2504 WLC with a windows 2003 LDAP server for extented authentication, is there any guides available for this ?
View 1 Replies View RelatedAAA/Identity/Nac :: ACE30 Module 4.2 Integrating With ACS 5.2?
Mar 10, 2012I am using ACE30 having s/w version: 4.2. I am using ACS 5.2
I have used the below commands to add ACE with ACS for AAA.
tacacs-server key 7 "nacs0wvd!q"
tacacs-server host 96.86.76.66 key 7 "nacs0wvd!q"
tacacs-server host 96.86.76.67 key 7 "nacs0wvd!q"
[Code].....
I am getting authenticated by ACS, but the problem is authorization is not happening. In ACS, i have just added the device IP using TACACS+.
Cisco Wireless :: AP 1140 Integrating With Hotspot Gateway
Jan 2, 2013I have 3 Cisco AP 1140 at my customer (Service Industry) place, so they requenst us to provide Hotspot solution to them for managing the Internet connection for limiting to their Customers over the account system. Let me know how i can integrate hotspot BOX with Cisco AP.
View 3 Replies View RelatedCisco :: 3501E Not Integrating In WLC4404 With 1121 And 1241 APs
Nov 11, 2012We have a WLC 4404 with about 85 1121 and 1241 APs. - I just added 6 new 3501E with Antennas, and configured the a new SSID, but non of my clients can connect to any of the 3501s. One solution from a tech was to update the NIC drivers. I verified that all test clients are 802.11N and sometimes they find the 3501 but often they switch to another of the older and weaker 1121 or 1241s. On one test I had a 3501 just outside his room and his client nic was picking up a weak signal 2 floors up, then it would go to one 1 floor down. eventually we could get it to feed of the nearest 3501 but it would go back to another 1121 or 1241 soon thereafter,.
View 5 Replies View RelatedIntegrating Tablet Into A Windows Home Network?
Feb 2, 2012I know nothing about Tablets (iPad or Android) or their operating system. My wife is interested in getting a iPad 2 or Android tablet.
I have a home WiFi network based on two laptops and a desktop. They are all running Windows OS. I also have 3 external drives and two printers USB wired into the main desktop.
I have two questions:
1) Will I be able to integrate an iPad/Android tablet into the Windows home network so as to be able to access the .jpg photographs on the desktop drives?
2) Will the tablet be able to output work to the printer attached to the Windows Desktop?
Cisco Firewall :: Integrating Secondary Failover Unit ASA 5510?
Nov 20, 2011I have a single production 5510 with 2 contexts. Now I want to integrate the secondary failover unit. My question is: How much configuration needs to be done on the secondary firewall? How much of the configuration will be sync'd from the primary to the secondary when the secondary is connected?
For example, do I need to add the following on the secondary or will it be sync'd from the primary?
admin-context NAME
context NAME
allocate-interface Ethernet0/0.14
[Code].....
Cisco Switches :: Catalyst 4510 - Integrating SG200 Into Existing Network
Dec 17, 2012We have an existing network with a Catalyst 4510 core switch and departmental 3560 switches connected via fiber. Due to company restructure we can no longer afford to buy new 3560's when anything goes wrong so this week I purchased an SG200-26 which I'm trying to get onto the network.
This is a legacy network which I didn't setup so my Cisco skills are somewhat limited (another reason for the SG200's hopefully), anyway have been looking at the configs on the existing switches and trying to match settings in the SG200 setup however not getting anywhere! I have the config from the dead switch so I can show what needs to be achieved, any experience in downgrading environment in a similar way?
Cisco Switching/Routing :: Integrating Catalyst 2960 With Juniper Core And VLans
Mar 7, 2012I've just started a new job after a couple of years not touching cisco gear and been pitched in... My new employer has a network that's Juniper based. We've inherited a load of Cisco switches as part of the deal for hosting matches during the Rugby world cup (plus a load of Aruba wireless gear that promises to be my very own special millstone, but that's bye the bye.)
My task is to hang these catalyst 2960's onto our existing infrastructure via fibre connections.
On the Juniper switch, there are four vlans being pushed to the port the cisco's hooked into: Code...
Integrating A Camera Network With An Existing Network?
Nov 1, 2011Here is the scenario: A mid-sized IP based camera network (150 cameras, 1 management server, several client workstations, and several recording servers) has been implemented on a stand-alone LAN utilizing a class C configuration and is set up as a windows domain. The user now wants to add the ability for workstations on the existing class B network to connect (with client software) to the management server on camera network, network is controlled by enterprise sized domain (Think county). Access is controlled by camera system client software credentials. Here are my questions:
1) What is the best way to do this and what hardware is required? I thought about just adding a NIC to the management server but am concerned about the 2 different domains playing well together. Would a router be best? What do I need to consider as far as setting up firewall and/or gateway?
2) What considerations do I need to take into account regarding the camera network not taking bogging down existing user network?
3) The workstations on the camera network are not as “locked down” as they are on the user network (again, think county network security). Will I be creating a security hazard and if so, how can I prevent this?
Home Network :: Integrating 3550 Into Home Network?
Jul 13, 2012At the moment I have my home network (192.168.0.0/24) like as below (all connect using straight cables): [code] My Cisco lab equipment are in the basement all connecting to an access server which at the moment is plugged into Switch3-dumb (along with a printer & NAS).What I'm thinking is to replace the Switch3-dumb with a 3550 I'll be picking up later this week.Then using this to do as the Switch3-dumb did maybe by creating a native 'vlan 192' & putting it into a gig interface which will connect to the network using the straight cable, also putting the printer & NAS into the same vlan.This will hopefully still give me connectivity throughout.Then when required I'll like to use the 3550 with the rest of my Cisco equipment for setting up different labs (segmenting them from the home network by using different vlans etc.One of my reasons to implement the 3550 into the home network is to be able to play about on a regular basis (port monitor, traffic stats, etc).
View 2 Replies View RelatedCisco :: Prime LMS 4.2 Using 55 % Of CPU
Jun 12, 2012I recently installed LMS 4.2 appliance and I noticed that the web administration page was really slow. I checked the CPU utilization in VMware and it was at 55%.
View 1 Replies View RelatedCisco :: Prime LMS 4.2.2 Configuration
Nov 28, 2012I am using Prime LMS 4.2.2 software to archive configuration for my cisco Network Device switch and firewall . All works fine except for two new Cisco ASA 5525 and ASA 5545 ( Software Version 8.6.1.2 ) . I have already checked credential , ssh access , snmp configuration and all seem correct. But Archive configuration job end with failure. This is the error message:
View 1 Replies View RelatedCisco :: Upgrade LMS 4.0 To Prime LMS 4.2
Apr 22, 2012My customer is using Cisco Works LMS 4.0 ( Product # : CWLMS-4.0-300-K9 ) and we they are willing to upgrade it to Cisco Prime LMS 4.2 (or latest version). as well as adding additional device licenses to become 750
View 1 Replies View RelatedCisco :: Prime Upgrade 4.0 To 4.1?
Feb 1, 2012have bought license for LMS 4.0. I want to upgrade to 4.1. Should i buy any additional PAK for the license upgrade?
View 1 Replies View RelatedCisco :: Will LMS Prime 4.1 Be Getting A Map Module
Oct 31, 2011Will Cisco LMS Prime 4.1 be getting a map module, so you are able to see a graphical map of up and down status of devices? I know the topology map is a module within LMS, but what would be nice to see is a graphical map, where you are able to manipulate the icons to place them on that status map.
View 2 Replies View RelatedCisco Wireless :: Cannot Add MSE 7.4 VM To Prime 1.3.20
May 19, 2013How do I add the MSE 7.4 VM to Prime 1.3.20?
The Prime uses https or http when trying to add the MSE. But those ports are closed on the MSE. The MSE seems to expect traffic on tcp 8001.
We did not change the default NCS-username/password in the startup-wizard.
C:WindowsSystem32>nmap 192.168.0.211
22/tcp open ssh1099/tcp open rmiregistry1521/tcp open oracle8001/tcp open vcom-tunnel9001/tcp open tor-orport9002/tcp open dynamid
[Code]......
Cisco :: LMS 4.0 Upgrade To LMS 4.2 (Prime)?
Mar 11, 2013Is it better to uninstall LMS 4.0 completely and then install LMS 4.2 or could I do a direct upgrade?. I've heard the db tables etc. have changed a lot and might cause problems for a direct upgrade.
View 5 Replies View RelatedCisco :: Upgrading NCS 1.1.1.24 To Prime 1.3
Mar 13, 2013I am currently running NCS 1.1.1.24 and trying to upgrade to prime 1.3, but running into some issues, i applied the patch ncs_patch-1.1.1.24-upgrade-12.tar.gz, but when i try to acutally upgrade i get the following...
admin# application upgrade PI-upgrade-bundle-1.3.0.20.tar.gz defaultRepo
Save the current ADE-OS running configuration? (yes/no) [yes] ?
Generating configuration...
Saved the ADE-OS running configuration to startup successfully (code)
Cisco :: Migrate From WCS 7.0.172.0 To Prime NCS
Mar 12, 2012Is there anyway to migrate off of WCS to Prime NCS? We have a fully built WCS system with maps and all configs and was wondering if there was a way to restore to NCS.
View 1 Replies View RelatedCisco :: Migrating From NCS 1.1.2 To Prime 1.2?
May 8, 2013[URL] it mentions that migrating from NCS 1.1.2 to CPI 1.2 isn't possible.
How can I get around this?
Cisco :: LMS 3.0 To Prime 1.1/ LMS 4.2 Migration?
Nov 28, 2012A customer is asking to upgrade their LMS 3.0 to Prime 1.1. However, the customer or their previous system's integrator never actually installed LMS 3.0. The licensing and PAK were never used as well. My question is, can I still use the migration top level part # R-PI-1.1-UP-K9 to upgrade LMS 3.0 to Prime 1.1 because there was no licensing ever installed? How would the migration of the current licensing work with the new licensing PAK if that is the case? Or does the customer have to purchase a fresh Prime 1.1 licensing (top level part # R-PI-1.1-K9) because LMS 3.0 was never installed?
View 2 Replies View RelatedCisco :: Update To Prime LMS 4.2.3?
Feb 5, 2013After update to LMS 4.2.3 is get always a message to confirm when login:
"Server is capable for performance tuning. Please enable PTT ...."
Even when i setup PTT the message will come again next time i login.The message comes also several times after login.where to disable this message?
Cisco :: WCS 7.0.240.0 Data Export To Prime 1.2.1.012?
Apr 18, 2013I'm trying to migrate old data from WCS 7.0 to Prime 1.2 ... I have already created the zip file from WCS and imported it into the defaultRepo on Prime. I see it in the directory when I do a show repository defaultRepo so I have confirmed that it is there. My issue is that it appears Prime 1.2.1.012 won't accept the cli command of ncs migrate.
how I can proceed with the migration? I haven't been able to find any similar command in the Prime CLI so at this point I'm lost as to where I should go from here. I really don't want to have to tell the customer they have to downgrade to Prime 1.1 in order for them to perserve their maps especially since the Deployment Guide for Prime Infrastructure states that it is possible to migrate date from WCS 7.0 to Prime 1.2 as shown below ...
Data Migration
#
Data can be migrated from WCS 7.0, NCS 1.1, or LMS 4.x. More details on migrating data from each of these applications are spelled out in the following sections.
[Code].....
Cisco :: How To Kick Off A User In Prime 4.2
Mar 4, 2013possible in Cisco Prime 4.2, to kick off a particular user? in GUI or CLI ?
View 0 Replies View RelatedCisco :: LMS / Prime 4.1 - No Discovery Of WS-X4712-SFP+E
Dec 4, 2011my customer is using Cisco Prime 4.1 as an Upgrade from LMS 4.0 and has made a discovery of a new added Cat 4506E with a Sup 7E and Modules.All the devices have been discovered, excepted the module WS-X4712-SFP+E.Is this card not supported yet ?I could not find any detailled and actual information about the support or not of this module, or about the conditions for the Module support it in Prime 4.1..How ist it possible to proceed to having this module discovered ?
View 1 Replies View RelatedCisco :: Prime LMS 4.1 SMTP Settings
Jul 16, 2012We have installed the Cisco Prime LMS 4.1 in our production environment. We have configured SMTP settings, but unable to find where we can configure username and password for SMTP authentication. It's only giving a option to enter email address without any authentication parameters.
View 2 Replies View RelatedCisco :: Prime LMS 4.2.2 Setup Error
Aug 28, 2012When I run installation process I have received unexpected error:I have windows 2008 R2 x64. Antivirus is disabled and I have administrator privilege.
View 6 Replies View RelatedCisco :: WCS 7.0 To Prime Infrastructure 1.2 Migration?
Apr 9, 2013WCS 7.0 to Prime Infrastructure 1.2 migration?I am so confused on the migration procedure as I found the documents in Cisco kind of contradictory.Some document said it is required to upgrade WCS to NCS 1.1 before to go to prime infrastructure 1.2.And the other document said WCS can directly upgrade to prime infrastructure 1.2.
View 13 Replies View Related