can we install the ISO LMS 4.1 directly on a UCS platform?What platform UCS is supported?Do you have install experiences you can share?Is the ISO LMS 4.1 a Linux implementation?
View 6 Replies
I've been researching the 3750-x Netflow support but I'm not 100% sure of how much support it has. From what I've read the only way to get NetFlow support is to install a specific module that provides NetFlow. I also heard about how it might support s-flow but I haven't found out for sure.
View 8 Replies View Relatedcan wireless router support up to 100 user including support network printer
View 1 Replies View RelatedI formatted flash and now I need to install IOS .
I know than I have to do it using TFTPD, but I cant connect my PC and cisco.
On cisco throught console in putty I wrote :
rommon 1 > set
rommon 2 > IP_ADDRESS=10.10.10.2
rommon 3 > IP_SUBNET_MASK=255.255.255.0
[Code]......
I can login into the console just fine but if I try and login into the server via the web [URL] it tells me invalid username or password.
During setup I left the username default and set the password. Then it asked me for the password to login to the web but it never asked me the username to use. I have to set this up very soon.
Got following problem with an LMS server that is installed without DNS server in the network, because this customer doesnt own and doesnt need any.
CS,CM,CV is working and contains devices, but RME (cannot connect to db) and DFM (TIS URN found) not. pdshow and dbRestoreOrig.pl after calling, hangs for ever.
To loose no further time with troubleshooting, I want to reinstall LMS from the scratch.
But I dont want to setup an DNS server just for resolving the only IP-Adresse from LMS server for self purpose only. Do I need an entry in driversetchosts for LMS server itself?
<IP> <Name> <Name>.<Fake-and-complete-unimportend-domin>
Do I need a fake-Domain? or can Domain be empty?
OS=Win2008,R1,SP1 as Standaloneserver (WORKGROUP)
I would like to install the LMS 4.1 (EVAL-LMS-41), the evaluation one, and want to know what are the minimum and recommended requirements for a Windows machine.
View 1 Replies View RelatedI have CWLMS-3.0-5K-K9 with licence file but I can't install it in the VM ( the version didn't support virtualisation vmware).
View 4 Replies View Relatedi have two asa runnig 8.4 configured as Active/Standby Now i received a new Anyconnect license, how do i install the new license?Install the activation key on the Active and Standby unit.Install the activation key on the Active unit only.
View 1 Replies View RelatedOne of my friend wants to install 1 Router, Switches (Several groups), and 2 or more WAPs (Wireless Access Point) (Several groups).He knows that he has to install switch under router.But he was wondering where he should install the WAPs.And he is let each individual groups to use 1 WAP/Switches per group.So, where/how does my friend suppose to install the WAP?
View 2 Replies View Relatedhow to install a LAN
View 2 Replies View RelatedWhat vmware i have to use to install cucm 7. vmware workstation 7 or vmware server or exsi 4 or 5. Any correct link to download and vmware config settings.
View 2 Replies View RelatedI have generated request and our CA server gave us two files, one is certificate from CA itself, one is the certificate CA created for the ACS. I used the "Bind CA Signed Cerficate" under "local certificated"Option to bind the latter. it shows successful.and a web access from any pc will give you error info, "that the security certificate presented by this website was issued for a different website's address." And all the while I dont know how to deal with the other file, which is "Internal CA certificates" I was try to use the first option import server option, but it seems not right,
View 1 Replies View Relatedi'm looking for a recommendation for a setup guide including ft i've had a quick look a wiki and i can get basics but i'm not sure about if i need to setup additional contexts etc when i'm the only one using the appliance?
View 2 Replies View RelatedI have a fresh piece of 7606-S router, i am planning to install a new IOS ( 15.2.4S or 12.2.33-SRD8 ) SIP-200 / RSP720 moduls ... would ypu plese provides me a configuration guide for installing IOS for 7600 serise router.I have the image on TFTP server.
View 3 Replies View Relatedhow install a .lic file onto the new Cisco ISR G2 1921?
I know how to install via tftp, however I need to know how to install from USB.
I purchased a 2911 router and a 25-pack of VPN licenses (PID: L-FL-SSLVPN25-K9=).I registered the license, and supplied the serial number of my router when asked.I received a .lic license file.When I attempt to install the license on the appliance, I receive an error:
% Error: Install failed. UDI L-FL-SSLVPN25-K9=:FTX1542AKJ3 on license does not m
atch any device
0/1 licenses were successfully installed
0/1 licenses were existing licenses
1/1 licenses were failed to install
However, the following establishes that the serial number is correct:
SFGallery#show inventory
NAME: "CISCO2911/K9 chassis", DESCR: "CISCO2911/K9 chassis"
PID: CISCO2911/K9 , VID: V04 , SN: FTX1542AKJ3
NAME: "C2911 AC Power Supply", DESCR: "C2911 AC Power Supply"
PID: PWR-2911-AC , VID: V03 , SN: AZS153303LY
i´m trying to install Cisco Prime 4.2.1 but i´m getting following error.
View 1 Replies View RelatedI just wanted to know that can I install LMS 4.0 on a domain server.
View 1 Replies View RelatedIn my existing production router 7609 of my company, sup-engine already fixed in slot 5 with SRC2 12.2(33) IOS and I need to insert another sup engine in slot 6 with SRE7 IOS code image and after this, again sup engine in slot 5 must be with SRE7 IOS image...(also I have extra sup engines with SRE 7 code image ready with me) Query:i am going to offload router before proceed for this activity?i will insert new sup engine in slot 6 with SRE 7 ios image and now i need to re-install spare sup engine with SRE 7 code readily available with me by removing existing sup engine from slot 5 (Active) so what will be the proceedure to insert new sup engine with SRE 7 code in slot 5 and slot 6 with minimum downtime of router?
existing setup sup engine in slot 5 with SRC2 12.3 (old hardware) slot 6 is EMPTY
final result should be like this: sup engine in slot 6 with SRE 7 (new hardware)
sup engine in slot 5 with SRE 7 (new hardware)
I'm facing the problem that I can't install an CSD Image on the asa. Got the error:
[OK] webvpn
webvpn
[ERROR] csd image disk0:/csd_3.6.181-k9.pkg
The disk is (or was) full during extraction.
ASA 5510 has 256MB RAM, 1024MB Flash, ASA Version 8.2(5)41, ASDM 7.1(3)
I have a project ahead and I need to clarify some things before starting this project. I will install a new WLC 5508 and I have 8 AIR-BR1310G-A-K9-R, so Im wondering if I can use them.
- Can this model be converted to LAP?, right now they are autonomous.
- I need to used them as AP not bridge and under the governance of a WLC. Could this be possible?
- The intention is to use them for outdoor operation. Should I use one or two outdoor antennas?.
- ANT-2506 could be a good choice?.
I have ACS 5.2 in standalone mode in operation and need not incorporating a second server for high availability ACS, the new ACS is a version 5.1
What should I do first, upgrade the ACS version 5.2 and created the high availability or high availability and get up after the upgrade?
Several users on my network have been utilizing the Cisco Anyconnect client. Recently, an update came out and automatically tried to install. The installation failed, and now the old version is uninstalled and we can't install it again. When we try to install the client, the log below is what we get. What I can do to get it to stop (short of reimaging all 8 machines experiencing this problem)?
View 1 Replies View RelatedWith lms 3.2 during installation we can choose what to install i.e. not install DFM or IPM.
How can we do this in the new release 4.0 of the LMS bundle. I saw no options for it during installation of the new server.
I am trying to install AC3.1 on windows7 64-bit. But i get the error installation ended prematurely without any reasons for failure. I posted the errors here. I tried installing AC3.0 on windows xp and i get same problem. NAM is not getting installed . I just want to use the AC client to connect to wireless network.
View 2 Replies View RelatedI've freshly installed LMS 4.0 on VM server 2003 R2, after entering login details I'm getting the error Internet Explorer cannot display the webpage
View 3 Replies View RelatedI have an old DOS box running MS workgroup add-on 3.11. This has been running for years with no issues until I recently installed a new Win 2008 server which does not support Netbeui. I am trying to install TCP/IP but have had no luck finding the 16 bit version of tcp. I can succesfully add the 32 bit stack, but the nic doesn't like it. Has any ever run into this problem before?
View 3 Replies View RelatedIs it possible that i can install an OS such as XP to Remote PC?
View 11 Replies View RelatedI have a dedicated server "out there".They dont provide any OS media to install and use your licence key (obviously).I have a licence and my own DVD/ISO. I can use that, its not a problem.The issue is, I do have IP KVM/IPMI (I think that is what its called) and I can install the OS through that and mount the ISO. Problem is that it will take literally forever to install because my net connection is very poor (< 1MB upload)Is there a faster way to install Windows over the web in this situation? How can I make it "better" in this circumstance?now should I ever get the OS installed in this way, in future if I need to unfortunately wipe and start again, how can I make it a more quick process?
View 6 Replies View Relatedhow can i install VPN on my computer?
View 1 Replies View RelatedHow to install driver cd
View 1 Replies View Relatedhave to install a test system. Can any one tell me how to install a dual lan on windows 7 machines
View 1 Replies View Related
