How To Install A Dual Lan
May 6, 2011have to install a test system. Can any one tell me how to install a dual lan on windows 7 machines
View 1 Replieshave to install a test system. Can any one tell me how to install a dual lan on windows 7 machines
View 1 RepliesI just bought a new D-Link N750 DIR-835 Dual Band Router, and I tried installing it to apparently no avail. I used the installation CD and followed all the instructions carefully throughout, but once it was "working," I did a speed test and saw that there was absolutely no difference in speed.
I refuse to believe that this new router, which cost me over $100, would provide no noticeable difference over my old router. Speaking of my old router, I have the original router that Telus sent me for free. It's a Siemens Gigaset SE567, and I've dealt with it a few times when I had internet problems,fiddling with the 192.168.0.1 web address site, configuring the passwords and SSID, and the like. I'm not super-educated on the matter,but I know enough about it that with a thorough explanation, I could probably perform whatever is necessary.
Anyways, like I said, I followed all the instructions and after testing out some simple Youtube videos on both my tablet and laptop, through the wireless network that resulted, it couldn't even load a 480p video without lagging. I know that the router isn't the only thing that ensures speed, but even with my (probably barebottom) internet plan (which my father set up, not me, and knowing my father, it's probably the slowest connection available), I just cannot believe that the resulting network was the best speed available to me. So did I do something wrong? Are the routers interfering with each other? Is that actually the best speed I can achieve? Is that Gigaset even a router? Or is it a modem? Or both?
I'm running into the same problem. I'm trying to connect my 6100 Westell Modem as well, but I'm going through Cincinnati Bell Zoomtown. They sent me a disk & it does't have the right software on it. I was told to look online & have had no luck finding where to download. I have to use USB to connect. I'm at a loss at what to do. Have spent almost 3 hours on the phone with tech support at this point!
View 1 Replies View RelatedI would like to make a design with 4 Nexus 5596UP. 2 of them equipped with Layer 3 Expansion Module so they can serve as core layer and the other 2 Nexus used as Layer 2 for aggregation server layer.The 2 Nexus in the core layer will run HSRP and will peer with ISP via BGP for Internet connection The 2 Nexus in the aggregation layer will be configured as layer 2 device and have FEX and switches connected to them.What I am ensure of is how the vpc and port-channel configuration should look like between the 4 nexus. What I was thinking is to run vpc between the 2 Nexus in the aggregation layer and between the 2 Nexus in the core layer. Than I was thinking of connecting each Nexus in the aggragtion layer to both Nexus in the core layer using port-channel and vice-versa.
View 3 Replies View Relatedhow to change our wireless setup. Currently, we have 2 Cisco AiroNet 1130 WAP's in the office that go directly into the 2 POE ports on our Cisco ASA 5500. These WAP's have 1 SSID and are using WEP for security. After demonstrating the flaws of WEP to my boss, he has agreed that we should use something more secure and I've suggested WPA. We want visitors to our office to be able to hop on our wireless but on a separate guest SSID with WEP.
I'd like the internal SSID to route to the ASA and take the default route to the internet (it will be our new fiber connection once it's installed in a couple weeks). The default route is whichever connection is working since our ASA 5500 will fail over when it detects an outage.
I'd like the guest SSID to route to the ASA and then go over our existing cable connection. This connection will be our backup once the fiber connection is installed. Since we won't be using it very often, but will be paying for it, I advised that we send all guest wireless traffic over this connection since 50/5 is plenty for guests.
The current SSID (which will be the internal SSID) has no VLAN. We do currently have a few VLANS on our network, one for voice (.42) and one for data (.100) and the default (.0). What device to I create the VLAN on (Cisco 5500?) and how to I setup the WAP? I need very basic instructions to start and I'm also trying to do this without causing downtime if possible.
I've attached a diagram of what it should look like. Red indicates our internal network and Blue indicates the guest network. I can send screenshots as well.
I wanted to ask a question about the diagram I have included. We are bringing up 2 MPLS WAN connections and would like some specifics on the best design. We are using BGP to the providers. From there we have big questions. We can run BGP internal and are licensed to do so on the N5K's. The N5Ks are currently using HSRP for inside LAN clients as default gateway. We want to load balance and provide redundant routes using a dynamic approach. Should we use BGP internal utilizing the connections between the routers? Should we use HSRP on the routers? How best to get the routes to the N5K and should we be considering this?
View 5 Replies View RelatedI run 2 RV042 V1 for home and office with Gateway to Gateway VPN connection with single WAN connection in use. Everything works like a charm!
I was even able to create VPN connection with 2 WAN connection on one Router and 1 WAN connection on another with Smart link failover and VPN Tunel Backup.
I got problem though when i tried more complex connection diagram. [URL]
So basically I now have 2 ISP connections on each point with Static IPs and I'd like VPN Connection to be alive for ALL 4 options automatically with failovers (smart links) And tunel backups but i'm not sure if that's ever possible with my equipment.
One of my friend wants to install 1 Router, Switches (Several groups), and 2 or more WAPs (Wireless Access Point) (Several groups).He knows that he has to install switch under router.But he was wondering where he should install the WAPs.And he is let each individual groups to use 1 WAP/Switches per group.So, where/how does my friend suppose to install the WAP?
View 2 Replies View Relatedhow to install a LAN
View 2 Replies View RelatedI have an old DOS box running MS workgroup add-on 3.11. This has been running for years with no issues until I recently installed a new Win 2008 server which does not support Netbeui. I am trying to install TCP/IP but have had no luck finding the 16 bit version of tcp. I can succesfully add the 32 bit stack, but the nic doesn't like it. Has any ever run into this problem before?
View 3 Replies View RelatedIs it possible that i can install an OS such as XP to Remote PC?
View 11 Replies View RelatedI have a dedicated server "out there".They dont provide any OS media to install and use your licence key (obviously).I have a licence and my own DVD/ISO. I can use that, its not a problem.The issue is, I do have IP KVM/IPMI (I think that is what its called) and I can install the OS through that and mount the ISO. Problem is that it will take literally forever to install because my net connection is very poor (< 1MB upload)Is there a faster way to install Windows over the web in this situation? How can I make it "better" in this circumstance?now should I ever get the OS installed in this way, in future if I need to unfortunately wipe and start again, how can I make it a more quick process?
View 6 Replies View Relatedhow can i install VPN on my computer?
View 1 Replies View RelatedHow to install driver cd
View 1 Replies View RelatedI own in my house can install any programs, my i phone, my i pad, my pc, my playstation 3, and my mac are unable to install anything. They will download a program but when you run the program its data is corrupt. Or its says " unable to be installed at this time"
View 3 Replies View RelatedHow to install tp-link 350
View 1 Replies View RelatedI formatted flash and now I need to install IOS .
I know than I have to do it using TFTPD, but I cant connect my PC and cisco.
On cisco throught console in putty I wrote :
rommon 1 > set
rommon 2 > IP_ADDRESS=10.10.10.2
rommon 3 > IP_SUBNET_MASK=255.255.255.0
[Code]......
I am using Win 7.But my cd drive is not working.So can i install iis 7 from any other source??
View 2 Replies View Relatedcan't install DHCP + DNS i try install it from add/remove and i select networking services and i have 1 service to install is internet gateway device?
View 1 Replies View Relatedcan't connect to the net with win98,,clean install...sys was runnin xp and working fine...formatted the drive and did install..all fine except connecting, comcast kids r do young to navigate it, says they don't support win98..but someone must be surfing with 98.
View 4 Replies View Relatedtrying to install the rocket hub
View 1 Replies View RelatedIQU_bootstrap.exe i keep telling it no or close the window i have not installed this want to know what the tech support thinks
View 3 Replies View Relatedi keep getting the message install email client how do i do it
View 1 Replies View RelatedI need to install a ethernet card into a pci slotI have an old HP 751n that has a ASUS P4S333-M motherboard. When I look at the ethernet information with my motherboard it says:
SiS 900 PCI Fast Ethernet Adapter
Ethernet 10/100 LAN supplierSiS 961+PHY ICS 1893.
Ethernet configurationIntegrated Down.
I recently got ATT u-verse and the POS 2wire modem/router won't let my local computers connect. I can FTP into my PS3, but can't run a media server. Can't share files between computers & can't connect to my Directv receiver with Directv2PC Everything worked before the u-verse. tried changing firewall settings, but no luck. tried turning off the firewalls on the computers, no luck. all devices have internet connectivity and are connected to the same RG through either a wired or wireless connection. .tried hooking another routers WAN port to a LAN port on the u-verse modem, with and withouit a different subnet, with and without DHCP......
View 1 Replies View RelatedI don't have any other space in the PC, but would like to install a new graphics card, and it will take up two spaces, and the LAN is in the way.Would removing this LAN be any big deal, considering my needs?
I recently re-installed Vista and while attempting to set up a wired network, I can't locate the wizard.I only need to set up two PCs. Is there a way to set up a network without it or is there a way to re-install the wizard.My service is Xfinity cable internet, a net gear router (5 port 10/100 Mbps FS605 v3).My pc is a HP s3700y 32-bit, the other is a dell running XP pro. I used to have these two networked when I was with Att, but with this new service I wanted to wipe the HP clean. Now I can't find the wizard, all equipment is operating properly.Have ran several checks.
View 14 Replies View RelatedSo as far as I can tell our server is not running any AV whatsoever, so I'm buying Kaspersky Small Business with the 10 PC package:Kaspersky Small Office Security | Virus Protection | Kaspersky Lab to install on it and our other PCs, and I was wondering if there's anything I need to know about installing AV on a server.
View 19 Replies View Relatedhow can i repair my pro link setup while network connection problem appears in the computers belonging to the same LAN
View 1 Replies View Relatedhow to install password in Wi-Fi?
View 8 Replies View Relatedhow can i install my router linksys wrt110 no cd?
View 1 Replies View Relatedi have install anew router and i cant get my ps3 to work properly what can i do how to delete the old password
View 1 Replies View RelatedI have cable internet with a wireless router. My home computer/internet works fine My second computer connected via wireless was recently infected with a virus and I had to do a complete system restore. Since doing that, I cannot establish a connection. My computer can find the wireless connections and the wireless network connection shows enabled show that it but no IP address. If I repair, I get the error message "TCP/IP is not enabled". I tried enabling, reinstalling, I have tried every suggestion on this topic that I have found in other forums (running command, etc).
View 1 Replies View Related