I need to install a ethernet card into a pci slotI have an old HP 751n that has a ASUS P4S333-M motherboard. When I look at the ethernet information with my motherboard it says:
SiS 900 PCI Fast Ethernet Adapter
Ethernet 10/100 LAN supplierSiS 961+PHY ICS 1893.
Ethernet configurationIntegrated Down.
I don't have any other space in the PC, but would like to install a new graphics card, and it will take up two spaces, and the LAN is in the way.Would removing this LAN be any big deal, considering my needs?
how much difference does it makes if i install a NIC PCIe card instead of using the MotherBoard LAN RJ45 for DSL PPPOe internet access?how much does a NIC lowers the latency?
View 3 Replies View RelatedI've just installed a clean Windows 7 Ultimate on a brand new Acer Aspire 5750.The lan nor wireless didn't work out of the box. After installing the Gigabit lan drivers it found the network card But it can't find the wireless. When I try to install the Wireless drivers from: [url]It's the Atheros card I have. So when I try to install the Wireless Lan Atheros drivers it sais:"The device doesn't exist. Please plug the device back in and try again" What do I do now? It's a laptop, I can't exactly remove the network card.
View 1 Replies View RelatedCan I install an Intel 6235 wireless card in my 14z (non XPS)?
View 2 Replies View RelatedWe have a cisco 3825 router with OS version 12.4 and one VWIC2-2MFT-T1/E1 card at Slot 0. Now I have to add one more card of the same type in the router.
I need to know the steps or process to add the the 2nd card in the router.
Ive recently bought a Dell XPS 8300 desktop PC without a wireless card.
I have purchased a Dell 1520 wireless mini PCI-E card and installed it but it is not showing in the device manager at all.
The system is running Windows 7 Home Premium 64 bit, so i have downloaded the relevant driver for the wireless card from the Dell website but when i try to install the driver i get an error message along the lines of "No compatible hardware found. The software you are attempting to install is not supported on this system."
It clearly states that this driver is compatible with Windows 7 64 bit.
Ive tried refreshing the hardware list in device manager and searching for new hardware and ive cleaned the connector on the wireless card and reinstalled but it still isnt being recognised.
today my Belkin 7050 wifi adapter arrived.I went through the install procedure from the cd,and when asked to plug in the adapter,I got the message asking for a notebook card,which I haven't got.It then told me that the drivers aren't installed.The device isn't showing in device manager.I called Belkin support but all the could suggest was that the device was to try it in another computer.I am unable to do this because the communal computer needs administrator rights to install programs etc.
View 10 Replies View RelatedI cannot install the drivers for my TrendNet TEW-423PI network interface card. I am running Windows 7 64-bit with an Intel i7 2700k and an Asus motherboard. I have tried installing with the card already in the computer - no luck. Card out of the computer install and then shut off and put in - no luck. The instructions that come with the card say that after you install the program that instantly runs from the CD provided you should shut off the computer and install the card and when you turn the computer back on the drivers will install automatically. It has failed to do so and although I pulled all possible drivers from TrendNet's site it still stubbornly refuses to even recognize that there are drivers for it to install.
View 2 Replies View RelatedMy computer was playing up so I reinstalled windows. Only problem is the disk that has the drivers for the Ethernet doesn't show it so i can install. I went into the disk and tried to manually reinstall but it just installed and didn't work. I can't see the network adapter under the device manager it's like it's gone. It's a custom built system on xp.
View 1 Replies View RelatedI just installed windows 7 on a new machine I built myself. I ran the driver cds for the motherboard and GPU.
I have 2 wireless cards I have tried neither will pick up any wireless signals.
One is a Linksys wireless-G pci adapter Model wmp54g the other is a broadcom netlink gigabit adapter also wireless.
I have tried the newest drivers by downloading them but still no luck.
I am currently tethered to my phone.
I upgraded processer, ram and mobo, clean install vista ultimate wg311v3 wireless card, all signs and data shows im connected to the internet. But i can't get to any webpage.. i downloaded sp1 and sp2 on a diff computer and put them in but no luck.
View 3 Replies View RelatedI have a Dell XPS 9100 system which has a Dell Wireless-N 1525 PCIe WLAN (a/g/b/n) card which I would like to transfer into my new Dell 8500 which comes with a Dell Wireless 1703 WLAN (g/b/n) half minicard. This is because the Dell 1525 is dual band and is faster than the Dell 1525. I would like to get the procedure for installing the Wireless-N 1525 PCIe WLAN card into the XPS 8500 (and replacing the 1703 half minicard).
View 9 Replies View RelatedCannot get my Intel WiFi Link 5300 wireless card to install properly on my my Latitude 6500 using XP SP3. I can go to the Intel website and download the latest driver but once everything has been downloaded and ran, then restarted the wireless icon says that my driver is not installed.
View 13 Replies View Relatedi am experiencing some sort of issue with my Ethernet Controller. About an hour ago i had run a diagnostic report, (using my Norton 360 security program) while i scrolled down the report i came across an orange attention bubble that read "Inoperable Hardware Devices" then a chart lists hardware devices that aren't working, it looked like this:
Data Type Device Problem/ Description
-Device Type -Ethernet Controller
- Device Status -Device Drivers are not installed
(Code 28).
i tried to update the device but it doesn't work, it says that "windows was unable to install Ethernet Controller, ...Windows could not find driver software for your device"
My wireless printer works intermittently and the computer shows I need to install an "ethernet controller" which then does not install. How do I install an ethernet controller on my Lenovo with Windows 7 Home Premium?
View 1 Replies View RelatedI recently acquired a new mobo to tide me over until I can get the spare money to order a new one (which probably won't be until after the first of the year) however, the board, while better than what I had, has some problems hence why I got it so "cheaply". The problems I had with it have been fixable/liveable with. Anyways, here's a description of my problem and some brief applicable system specs.
The ethernet port on this board was bad, knew that from purchase date. However I ordered a brand new card (10/100MB NIC PCI Ethernet Card), installed it, and the drivers all loaded, and the card is listed as working properly. I have no internet connection or network connection even listed. The way my system runs is as follows.
Computer/Ethernet Card -> Cat5 -> ASUS Router -> Cat6 -> ISP Router -> Outside
I have tried hard lining it direct from the ISP Router as well to no avail.I've even tried using the ipconfig.exe commands. Including /release, /flushdns, /renew. But, whenever I open the DOS panel with the command it just disappears in a millisecond.I know the PCI port on the board isn't bad because I literally just removed my USB expansion card from it to install this one. I even tried switching it with the other 2 PCI cards I have installed and they all work perfectly so it's not the PCI slot.
Is there a PCI Express 2.0 Gigabit ethernet card [NIC] which i can install in this motherboard where usually one installs NVIDIA graphic cards?
View 4 Replies View RelatedI have a Dlink Dir-655 Wireless Router. The two recommend cards are the DWA-552 and DWA-556. I wanted to know if I should go with any of these or another brand. Basically I want to know what would be a good wireless card to get for the Dir-655 router.Also how do USB wireless card compare, is there a big performance difference
View 12 Replies View Relatedmxo4405392 S/N
NEED TO FIND PROPER NIC . MY COMPUTER HAS NO ETHERNET PORT
I've been having some problems with my Ethernet connection lately.The problem started early last week. I'm currently relocating, so I unplugged my laptop from the Ethernet connection I had at my old place.At two different locales, I have tried to use an Ethernet connection in order to get better speed (the wireless at the first locale was non-existent and at the second it is extremely slow in my room). I have done so with two separate cables that I have tested on others' computers and found that they are perfectly fine. That, of course, leads me to believe that it is my computer and is either a hardware or software problem (here's hoping it's the latter).Anyway, my laptop is a Dell Inspiron 1720 (purchased in 2006). About a year ago, I updated to Windows 7 from the pre-installed Vista. Never had any problems (as I said, everything was fine up until about a week ago). The installed card is a Broadcom 440x 10/100 Integrated Controller. Everything under Device Manager indicates that the hardware is working properly and has all of its drivers installed, but nothing is working.I have tried to uninstall and re-install the drivers (albeit by allowing windows to find them automatically), but the result is the exact same.I have checked the port and found that there is no debris or obstructions. My computer hasn't been dropped or mishandled in any way.
View 13 Replies View Relatedi am able to connect to wireless networks but when i use my Ethernet card it says unidentified network
View 1 Replies View Relatedi upgraded my computer from win 7 ultimate 32 bit to 64 and when i shut down my computer and power up the local area connecion dont recognize the ethernet card my ethernet card is 82578 dc gigabit not onboard card and i installed all the drivers to the ethernet card could it be my motherboard ? dp55wb?
View 6 Replies View RelatedIt keeps saying the connection between the modem and the computer is broken. I've installed a new ethernet cable. it works then it drops. we have hughes net here. the techs have been out and cannot isolate the problem.
View 3 Replies View RelatedI have the following problem. I bought two TP-LINK TG-3269 gigabit cards, placed them in two computers and connected them directly. On my Ubuntu system I used iperf tool and measured only 95 Mbit/s. It wont go any faster, I tried many times with different settings.
The indicator lamp shows 1000 Mbit/s.
May I use an access point as wireless receiver to have internet on RJ45 interface?Is possible that internet source for AP to be on antenna, not on RJ45?
View 4 Replies View RelatedA few days ago my mother's computer suffered a burned out motherboard ethernet adapter due to the PPPoE box on the roof of our building getting hit during a thunderstorm (apparently). I decided to buy a separate ethernet card, as her computer had a PCI slot free at the time - why not use it? I ended up buying a cheapo D-Link DFE-520TX. Anyway, I took it home, booted up the computer (running Windows XP with SP2 I believe) and installed the drivers supplied with the card. The instructions clearly stated to install drivers first, then physically install the card. I did so - everything went smoothly, popped the card in, booted the computer up again. Card was found, no problems. Except when I plugged the network cable in, the card remained idle. No blinking green activity light, no reaction from the Local Area Connection on the computer, nothing. Device Manager/Properties tells me everything is working just fine - except that the card itself doesn't "work". Took it back to the store, they plugged it into their test machine - everything worked just fine, green light blinking, internet access, etc. I've since tried uninstalling and reinstalling the device, swapping PCI slots (the second one is taken up by a Sound Blaster Pro). No dice - the audio card works in either slot, the network card doesn't work anywhere.
View 5 Replies View RelatedAs of around a week ago, I've been experiencing a strange thing with my internet connection. I live in apartments that provide internet to everyone that lives there, and had been living here for a few months before this started happening.I now constantly have my internet crashing in the middle of browsing/gaming. I will either open up my laptop to the internet not working already, or it will work, but crash randomly while I am using it.
Trying to load a page on google chrome, it will show a message saying DNS Lookup Failed, and an icon will pop up in the right corner of my screen with a yellow (!) triangle. If I hover over it, it will say no internet access.I've followed the few steps they had on there, but none of them worked. I've never had a problem like this before, and haven't made any modifications to anything on my computer lately, so I am pretty confused as to why this is happening. I know it is something on my end, because my roommate's internet is just fine, and even used my ethernet cord on her computer, and no problems at all.
computer keeps restarting whenever i connect my network cable.
View 1 Replies View RelatedCould the new internet card be making my downloads and emails VERY slow or is it bad line speeds. Would a new modem router improve things.
View 1 Replies View RelatedI have cisco 1721 router so I installed an ethernet interface card so when I make show run I found that there is a fast ethernet 0 and ethernet 0 (which I installed) so i wand to make subinfaces of the etheernet 0 but I can't. I tried to make encapsulation dot.1q but it doesn't accept it.
Is Ethernet0 supported to generate subinterfaces?
I had a question regarding the Cisco 2811. I tried fitting an NM 2FE-2W card and the fast Ethernet interfaces of the module never get recognized. Is there a special command to enable it or isn't the module supported at all by the router. If not , is there a way to have the router possess more than the 2 Fast Ethernet interfaces it already has? Let me know if any more info is needed from my end.
Another question I have out of curiosity. Is it possible to make the controller T1 port of a VWIC 1MFT-T1 or a VWIC 2MFT-T1 act as a fast Ethernet.
what routed ethernet card (WAN) can be inserted in Cisco 2811? I wan to replace 2Mbps Framerelay to 10 Mbps
View 5 Replies View Related