I upgraded processer, ram and mobo, clean install vista ultimate wg311v3 wireless card, all signs and data shows im connected to the internet. But i can't get to any webpage.. i downloaded sp1 and sp2 on a diff computer and put them in but no luck.
View 3 RepliesI've just installed a clean Windows 7 Ultimate on a brand new Acer Aspire 5750.The lan nor wireless didn't work out of the box. After installing the Gigabit lan drivers it found the network card But it can't find the wireless. When I try to install the Wireless drivers from: [url]It's the Atheros card I have. So when I try to install the Wireless Lan Atheros drivers it sais:"The device doesn't exist. Please plug the device back in and try again" What do I do now? It's a laptop, I can't exactly remove the network card.
View 1 Replies View RelatedSo the other afternoon we had a freak power outage, my PC was on and connected to a surge protector. So once the power came back on, literally like 5 minutes later, I rebooted my PC and have had Wireless issues ever since. My PC is custom built with a Netgear WG311V3 PCI Wireless card in it. When I boot up, it tells me I am connectied to our wireless network, but no websites will load. I check for wireless networks but my PC tells me none are in range. I have had this issue before so I goto Network Connections and Disable Wireless Network Connection 2, my wireless card, and then when I goto Enable it I get this error: Connection Failed.
View 9 Replies View RelatedI changed my operating system from vista to vista ultimate because the OS could not start. Now everything is working fine but I can not use my wireless connection. I recieve a code 10 error message stating that my network adapter can be found but the driver can not be installed.
View 6 Replies View RelatedThis is about to cause me to buy another router. This will be the 4th clean install that I have had to do. If my power, or my internet goes down, a regular proper reboot / or reset, will not get my ea2700 back online. It takes uninstalling & deletion of the stored Application Data files.
View 8 Replies View RelatedMy broadband seems to have stopped uploading data. I run broadbandspeedchecker and it shows download of 8 and then upload doesn't work at all and shows 0.I can browse some pages, but don't have full use of all pages like my CMSA admin, can log into my hosting using FTP, but can't access directories, Skype doesn't connect.Even stranger is it all works for a few seconds, even connecting Skype, but then stops again.I have completed a few system restores going back a week before the initial problem and still no joy!
View 7 Replies View RelatedI tried to do a a system recovery to my sis laptop a " emachine e620 " but the recovery cd didn't work so I used another vista cd the pc had " vista basic x86 " so I decided to install " vista ultimate x86 " everything was going fine until the pc said error setup cannot be completed I tried like 10 times so I decided to desable some devices and change the hard drive to in the bios to mointed I thik is call like that then the windows did a perfect install super fast now my problem is with the " network controller " I went to emachines drivers and support pick the rigth ones and my network controller still missing the drivers I can see the wifi saying on the screen off and on but not internet.
View 1 Replies View RelatedI have an Inspiron 6400 XP SP3 Intel PROset/wireless Wi Fi
Belkin Wireless G Router (supplied by Dell with the laptop)
I had to do a clean install of the laptop. Until then good connection no problems BUT since the clean install I am experinecing intermitant problems Wifi connecting to the router. The wireless finds the router without fail but won't always connect. When is doesn't, a reboot makes no difference but power cycling the router always works. After hours of strong connectivity the connection drops out unpredicatbly.
I have tried updateing the driver for the wifi NIC and the Proset software direct from intel which seems to make no difference.
I did a re-install of my operating system the other day and im sure i messed up something because i deleted the whole parameter first or whatever its called then reinstalled with the CD that came with my laptop. this is an older model 5160 Inspiron Pentium 4.Everything seems to be working fine except that there is no wireless connection icon or anything of the kind now. I have looked and looked and the only icons to connect with are the local area connection - no wifi connect.
View 2 Replies View RelatedI just installed Tomato firmware (details below) on my wireless-N router and everything appears to be working fine on the router's end. I can connect to the Internet properly with a wired (Ethernet) connection; in fact, that's how I posted this question.
What I cannot do is connect to the router wirelessly in any way. At first, I thought that something was wrong with my wireless security settings, because I read about some incompatibilities between Windows 7 and AES encryption. However, when I changed to TKIP, the issue persisted; when I switched from WPA2 Personal to WEP, the issue persisted; and when I disabled wireless security entirely — just for testing purposes — the issue still persisted.
My Internet search for this issue brought up a lot of old forum and mailing list posts, most of which were useless. The only one that seemed promising suggested disabling Afterburner, but that came disabled by default on my install. I did try enabling it and then disabling it, but it had no apparent effect.
In case it's relevant: before I installed Tomato, I had a somewhat funky install of dd-wrt on the router. The first thing I did after installing Tomato was a full clean of the nvram through the web GUI's Administration → Configuration → Restore Default Configuration menu.
What do I have to do to get wireless running? I only have one computer available at the moment, but I'll try to update later if and when I can borrow more devices for testing.
Assorted specs:
Linksys WRT160N v3
Tomato Firmware v1.28.9054 MIPSR2-beta K26 Mini
Linux kernel 2.6.22.19 and Broadcom Wireless Driver 5.10.147.0 updates
EDIT:This is a computer issue, not a router issue. Two smartphones with wi-fi connections and another computer are all able to connect to the wireless network with no problems. However, the original computer was able to connect to the same router just fine before Tomato was installed. It has an internal wireless-B/G card, and I had Tomato set up to broadcast G-only, so it should have been compatible.
EDIT 2:The computer in question was the only device in the house that wasn't set up for wireless-N, so I went out and bought a Wireless-N USB adapter and changed Tomato to be N-only. Using the new adapter, I get connection again. I suppose it's possible that the computer's OEM internal wireless card failed at exactly the same time that I installed Tomato on the router, but that would be one heck of a coincidence. I'll see if I can connect to some other G or B network next time I'm around one....
when i install using the CD it stops after i plug in the adapter with a 211 error telling me to replug it in blah blah. i tried to manually install the drivers from the CD. it dose this successfully but it wont pick up any net works. and when i use the network app that came with the CD it tells me it is not installed right. what is going on it says on the box windows vista compatible.
View 1 Replies View RelatedI have to reformat my hard drsk to original in ACER window vista system. NOw I can't install WMP54GX driver downloaded from Linksys web support.
View 1 Replies View RelatedIm trying to install this on a Dell Demension 4700 with win xp professional, I get as far as the setup, but can't go any further, the software wont let me set up any wireless.
View 2 Replies View RelatedI have tried Intel tools and latest drivers ( w/ and w/o pro wireless utility) but cannot pass thru code 10 error. Tried uninstall and install....as earlier card 4965 agn worked fine but seems like some conflict is stopping successful 5300 agn driver install.
View 20 Replies View RelatedCan I install an Intel 6235 wireless card in my 14z (non XPS)?
View 2 Replies View RelatedIve recently bought a Dell XPS 8300 desktop PC without a wireless card.
I have purchased a Dell 1520 wireless mini PCI-E card and installed it but it is not showing in the device manager at all.
The system is running Windows 7 Home Premium 64 bit, so i have downloaded the relevant driver for the wireless card from the Dell website but when i try to install the driver i get an error message along the lines of "No compatible hardware found. The software you are attempting to install is not supported on this system."
It clearly states that this driver is compatible with Windows 7 64 bit.
Ive tried refreshing the hardware list in device manager and searching for new hardware and ive cleaned the connector on the wireless card and reinstalled but it still isnt being recognised.
I have a Dell XPS 9100 system which has a Dell Wireless-N 1525 PCIe WLAN (a/g/b/n) card which I would like to transfer into my new Dell 8500 which comes with a Dell Wireless 1703 WLAN (g/b/n) half minicard. This is because the Dell 1525 is dual band and is faster than the Dell 1525. I would like to get the procedure for installing the Wireless-N 1525 PCIe WLAN card into the XPS 8500 (and replacing the 1703 half minicard).
View 9 Replies View RelatedI want to work on quickbooks 2010 pro between my desktop which is windows vista and my lap top windows 7. I will be the only user, how do i set this up?
View 3 Replies View RelatedWe use RVL 200 to establish VPN connections. Now we have the problem that no VPN connection is established.
The same problem with Windows 7, but also with Vista Buiness, using administrator account, IE8, trusted sites, ActiveX enabled ...Message: Virtual Passage Setup:Error: Virtual Passage not installed. Please install as administrator.
I need to install a ethernet card into a pci slotI have an old HP 751n that has a ASUS P4S333-M motherboard. When I look at the ethernet information with my motherboard it says:
SiS 900 PCI Fast Ethernet Adapter
Ethernet 10/100 LAN supplierSiS 961+PHY ICS 1893.
Ethernet configurationIntegrated Down.
I don't have any other space in the PC, but would like to install a new graphics card, and it will take up two spaces, and the LAN is in the way.Would removing this LAN be any big deal, considering my needs?
how much difference does it makes if i install a NIC PCIe card instead of using the MotherBoard LAN RJ45 for DSL PPPOe internet access?how much does a NIC lowers the latency?
View 3 Replies View RelatedI have a Vostro 460 desktop, recently bought, and then realized it would be better to add wireless router. Bought router and a PCIe wireless mini card that was suggested for my PC on Dell order site. The card arrived and am trying to install. The end plate with the aerial socket is not compatible with the removable access blanks in rear of case. Have I been sent an incorrect or unsuitable card, or is there some trick or adapting needed to install this card?
View 3 Replies View RelatedWe have a cisco 3825 router with OS version 12.4 and one VWIC2-2MFT-T1/E1 card at Slot 0. Now I have to add one more card of the same type in the router.
I need to know the steps or process to add the the 2nd card in the router.
today my Belkin 7050 wifi adapter arrived.I went through the install procedure from the cd,and when asked to plug in the adapter,I got the message asking for a notebook card,which I haven't got.It then told me that the drivers aren't installed.The device isn't showing in device manager.I called Belkin support but all the could suggest was that the device was to try it in another computer.I am unable to do this because the communal computer needs administrator rights to install programs etc.
View 10 Replies View RelatedI cannot install the drivers for my TrendNet TEW-423PI network interface card. I am running Windows 7 64-bit with an Intel i7 2700k and an Asus motherboard. I have tried installing with the card already in the computer - no luck. Card out of the computer install and then shut off and put in - no luck. The instructions that come with the card say that after you install the program that instantly runs from the CD provided you should shut off the computer and install the card and when you turn the computer back on the drivers will install automatically. It has failed to do so and although I pulled all possible drivers from TrendNet's site it still stubbornly refuses to even recognize that there are drivers for it to install.
View 2 Replies View RelatedI just installed windows 7 on a new machine I built myself. I ran the driver cds for the motherboard and GPU.
I have 2 wireless cards I have tried neither will pick up any wireless signals.
One is a Linksys wireless-G pci adapter Model wmp54g the other is a broadcom netlink gigabit adapter also wireless.
I have tried the newest drivers by downloading them but still no luck.
I am currently tethered to my phone.
Cannot get my Intel WiFi Link 5300 wireless card to install properly on my my Latitude 6500 using XP SP3. I can go to the Intel website and download the latest driver but once everything has been downloaded and ran, then restarted the wireless icon says that my driver is not installed.
View 13 Replies View RelatedI would like to use my WUSB54GC ver2 adapter with a WIN7 ultimate 64-bit PC. Do I have any chance to use it on this computer? Linksys' website says that only ver3 adapters can use the WIN7 driver.
View 3 Replies View RelatedI just received a new xps 15 yesterday. After some long hours of research, I found that I need a different wireless adapter to pick up my routers 5.0GHz signal. The wireless adapter in my XPS right now is an Intel Cetrino Wireless-N 1000. I was wondering if I ordered an Intel Centrino Ultimate-N 6300, if it would be compatible with my new laptop, and if so, the ease of switching the two adapters.
View 14 Replies View RelatedI have spend some time today trying to get my WMP600N-EU PCI Adapter installed. However up till now without any success. I run the installation CD with instructions, but the adapter is not found when I mount it into the PCI slot. I have tried both slots without success. Each time I get error 212.
View 8 Replies View RelatedJust had some more 3500i installed,but 2 of these seem to be working, but there is no green LED when no connection, and when you conneect there is no blue led. The LEDs to change when rebooting the AP, just neve seen this before, is this a fault?
View 5 Replies View RelatedI have a dual 5508 controller /NCS deployment. I deployed my first clean air AP today, a 3502I.
The Clean Air feature does not seem to work, however. "No information is available because CleanAir is disabled or otherwise not available for this radio. If no information is available and CleanAir is enabled then you can try rebooting the AP XXXX".The thing is that CleanAir is enabled on this AP.