Vista Ultimate X86 - Error Setup Cannot Be Completed?
Oct 26, 2011
I tried to do a a system recovery to my sis laptop a " emachine e620 " but the recovery cd didn't work so I used another vista cd the pc had " vista basic x86 " so I decided to install " vista ultimate x86 " everything was going fine until the pc said error setup cannot be completed I tried like 10 times so I decided to desable some devices and change the hard drive to in the bios to mointed I thik is call like that then the windows did a perfect install super fast now my problem is with the " network controller " I went to emachines drivers and support pick the rigth ones and my network controller still missing the drivers I can see the wifi saying on the screen off and on but not internet.
View 1 Replies
ADVERTISEMENT
Jun 23, 2012
My broadband seems to have stopped uploading data. I run broadbandspeedchecker and it shows download of 8 and then upload doesn't work at all and shows 0.I can browse some pages, but don't have full use of all pages like my CMSA admin, can log into my hosting using FTP, but can't access directories, Skype doesn't connect.Even stranger is it all works for a few seconds, even connecting Skype, but then stops again.I have completed a few system restores going back a week before the initial problem and still no joy!
View 7 Replies
View Related
May 12, 2012
I changed my operating system from vista to vista ultimate because the OS could not start. Now everything is working fine but I can not use my wireless connection. I recieve a code 10 error message stating that my network adapter can be found but the driver can not be installed.
View 6 Replies
View Related
Jul 1, 2009
I've set up a USB drive to be shared via the router (tried both a fat32 and an NTFS drive). When I login from a windows machine I can use the share point without any problems. When I try to use it from a Mac (mounted via smb://192.168.1.1/sharepoint) I can access the folders and download files. I can even create folders. When I try to copy a file onto the share point (normal file name, small file size) I get an error saying "The operation cannot be completed because you do not have sufficient privileges for some of the items." The console log says: "7/3/09 1:01:06 AM kernel smbfs_composeacl: smbfs_setattr 13, ignored "
If I try to copy the file directly via a terminal window I see this:
Macintosh-3:tc user $ cp ~/test.plist ./
cp: ./test.plist: fchmod failed: Permission denied
As I see it there is a problem with leopard trying to set permissions when copying and the router refusing. How to get this to work?
View 8 Replies
View Related
Dec 26, 2011
Using CCP installed Easy VPN after setup completed ran the test and it failed see below; What commands can I enter to check this? New at VPN so I am sure I have something miss configured.
Router Details
Attribute Value Router Model 851W Image Name c850-advsecurityk9-mz.124-4.T7.bin IOS Version 12.4(4)T7 Host name My Router
Test Activity Summary: Activity Status Checking interface status... Failed
Test Activity Details
Activity Status Checking interface status... Failed
Troubleshooting Results ; Failure Reason(s)Recommended Action(s)All the crypto applied interface(s) are down or no crypto applied interface is present Make the connection up and then proceed with VPN troubleshooting.
View 4 Replies
View Related
Oct 4, 2011
I upgraded processer, ram and mobo, clean install vista ultimate wg311v3 wireless card, all signs and data shows im connected to the internet. But i can't get to any webpage.. i downloaded sp1 and sp2 on a diff computer and put them in but no luck.
View 3 Replies
View Related
Aug 26, 2012
I got a laptop with bluetooth (windows 7 ultimate), and a desktop with bluetooth dongle (windows xp pro)how do i setup a blue tooth LAN gaming.
View 3 Replies
View Related
Jul 21, 2011
I can't seem to get the browser to properly show spacing.So I was browsing the internet normally, then all of the sudden, I'm disconnected. When I reconnected, I was able to access the network, but unable to connect to the internet. After attempting to diagnose the issue, I got the "There may be a problem with your Domain Name Server Configuration."can't connect to well known host microsoft.com.
View 9 Replies
View Related
Jun 20, 2011
Cannot turn off my windows firewalls on my vista toshiba after removing a scam Vista antivirus spyware download.. Cannot access any ports,Whenever I try to open a web browser, my disk defragmentation, ccleaner
View 1 Replies
View Related
Jan 22, 2012
I upgraded my old Linksys wrt54g to the E1500. All the XP os are connected via cable and wireless connection, but the Vista laptop i get local access only connection error. This laptop used to connect on the older router using wep but with E1500 wpa-2 it cannot connect. I am unable to ping the router from the laptop wireless. Connecting ethernet cable it works fine and logging in as a guest works does too.
View 1 Replies
View Related
Jul 31, 2012
My daughter is on an Army Base in the South Pacific. They have Dial up internet on their home telephone not DSL. They have high speed wireless at the base community center/coffee shop. I will be going there in 9 days to install the dir-615. She has a Dell Desktop with Vista Basic SP1, laptop with XP, IPAD2 and a NOOK Tablet. The dir-615 HVE1 with firmware 5.00na on the bottom sticker. She said she was able to go to web address, login, change the user name and password, started on the wireless configuration and she paniced. My question is basically this. by using a cat5 cable from the desktop to the dir-615 with dialup internet connected can the router be setup using the automatic method as opposed to manual. Our first priority is to be able transfer files to the 2 tablets without being connected to the internet like a switch and secondly If possible go on to the internet from a Tablet or the Laptop. I assume the second option would reuire internet sharing option when setting up the network and performance would be ugly.
Can get I get this router to work this way with just dialup to set it up
View 5 Replies
View Related
Jul 12, 2009
I am trying to setup a VPN using an RV042 (fw ver: 1.3.12.6) to access a VISTA computer over the internet using a laptop using QVPN's latest version. I finally got it to connect but then hang's with error " Gateway is not responding, do you want to wait?". If I say yes it go through the login again and hangs. If I say no, it hangsup. I've tried a couple different ideas using tunnelling and static IPs in the router but nothing. All I want is to be able to access one computer through the RV042 over the internet from any other computer using the QVPN.
View 6 Replies
View Related
Apr 27, 2010
For any still having trouble with the intial config of a CE500 Switch using Windows 7 / Vista...
Sure all of you have heard of the setup button and how to use it, its obvious Windows 7 / Vista do not properly recieve the DHCP, maybe an issue with the some new Microsoft legislation, the install address of the device in its setup phase, which you can read by the setup led burning steadily is 169.254.0.1
You wont be able to connect to this address in Windows 7 / Vista if you configure it statically, you will be able to view the Gratituous ARP from the Device using Wireshark, in the Windows 7 / Vista network adapter tci/ip v4 settings click on the advanced tab, there enter 169.254.0.1 as the default gateway, press the Setup button on the switch, wait for it to blink, connect your utp cable to port 1 check that the Setup LED is burning stable, type 169.254.0.1 into your web browser and enter a management IP address for the switch, alternatively use Cisco Network Assistant.
View 7 Replies
View Related
Dec 18, 2011
This is a reload. It says that is incompatible. It fixes that, supposedly. I make a new call and the disconnection is repeated.
Problem signature: Problem Event Name: APPCRASH
Application Name: Skype.exe
Application Version: 5.5.59.124
[Code].....
View 1 Replies
View Related
Apr 5, 2012
I have tried Intel tools and latest drivers ( w/ and w/o pro wireless utility) but cannot pass thru code 10 error. Tried uninstall and install....as earlier card 4965 agn worked fine but seems like some conflict is stopping successful 5300 agn driver install.
View 20 Replies
View Related
Jul 19, 2012
I recently bought a DIR-655 on amazon com, got a good deal. Since I'm old and slo, had issues setting it up, but finally got er dun!I set up a Network all by myself turned on player, did WPS(PBC) on player, and on D-Link. The router and Blu-ray are now friends, however, they are not on speaking terms.Network status on ol Blu- tries to connect then says - Network setting is completed, but cannot connect to the internet, Contact ISP.
View 8 Replies
View Related
Mar 14, 2012
I am trying to run TDR tests on a 3750G (ver12.2). The switch ports have 3502 series access points attached to them. When ever I run the test the results all show "Not Completed". I understand that this means the test failed but this happens with any port I try.
View 1 Replies
View Related
Feb 11, 2012
All Installed my AE1000 this evening, after two go`s got it to work BUT the Cisco installer comes up with "Our customer support team can assist Your Linksys Adapter was not successfully setup." but it is working .. I never got the screen with the four "bubbles" (as per the instructions here on the Cisco website)
PS Running Win7 with AVG security
View 1 Replies
View Related
Dec 12, 2010
i tried to configured L2TP connection on ASA5505.Phase 1 and Phase 2 are completed but Windows Client doesn't work. [code]
View 4 Replies
View Related
Aug 28, 2012
When I run installation process I have received unexpected error:I have windows 2008 R2 x64. Antivirus is disabled and I have administrator privilege.
View 6 Replies
View Related
Mar 14, 2011
I m facing Internet sharing problem in windows 7, when I m creating wireless adhoc network, so that on other(wi-fi enabled) system, I can use internet, At that time error like' Windows could not setup internet connection sharing' appears...
& after pressing ok... when I m doing it mannually( By going to the Properties of local area network-> then in Sharing tab option ] when I m selecting checkbox for internet sharing at that time error comes like' An error comes while internet connection sharing was being enabled The dep[endency service/group failed to start '
View 2 Replies
View Related
Apr 20, 2013
I bought a new CISCO EA6500. During, first setting up, error was occurred. And, I cannot do anything with this product. How can I setup this one?
Error code: 0x82BF0306
Error description: A JNAP call to the device failed for an unknown reason.
Model name: EA6500
Model description: unknown
Serial number: unknown
Firmware version: unknown
Operating system: Mac OS X 10.8.3
Software version: 2.0.12254.2
Connection type (WAN): unknown
IP address (LAN): unknown
IP address (WAN): unknown
Computer IP address: unknown
View 2 Replies
View Related
Nov 6, 2011
I'm trying to set up a 5505 (running 8.3) so that i can use the client vpn through RADIUS authentication.I have set up a new local RAIDUS windows box and used the ASDM asistant and a few other guides to setup the 5505.
View 3 Replies
View Related
Aug 18, 2011
when i tried to install ipv6 using dail up connection ,right click on properties scrolling networking tab checked internet protocol version 6(tcp/ipv6) and click install then select network features type is protocol selected . add - i have to choose from have disk- A: - browse- local file - system 32 here i donot know which .inf should i select .
View 1 Replies
View Related
Dec 16, 2012
So one day i turned my computer on and the internet said unidentified network, i been using the same modem with Verizon it worked fine. I have disabled the adapter, unistalled it all that and still does not work, i tried to make a new connection it still does not work, im in school and my computer is how i submit my work. I have called technical support with verizon they said its my computer.
Ipv4 address 169.254.195.91
Subnet mask 255.255.0.0
View 14 Replies
View Related
Jun 7, 2012
tell me the most advanced the udp and tcp open port scanner of my network ?
View 2 Replies
View Related
Oct 20, 2012
I am having pentium p3 zenith make,window xp sp3 is the operating system. Belkin router N150 is being used.,I am able to get connection through this router on other p4 pc of my friend.,but when I try to connect to my pc.,belkin router set up do not display.,and diagnostic network connection ,indicate that error 12007 could not connect to HTTP,FTP etc., IE 8 and mozilla firefox are installed and both give the same error i.e. connection to internet could not be established
Quote:
Windows IP Configuration
Host Name . . . . . . . . . . . . : home-1d64a843b7
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Unknown
IP Routing Enabled. . . . . . . . : Yes[code].....
View 4 Replies
View Related
May 3, 2011
I have windows 7 Ultimate , I have a wired ome network and haev a laptop and WD Live TV Hub on them but when I try and click on teh items under network in explorer it pops up with a enter network password, under which it wants a user name and password.i have added all the usernames and passwords I haev for the pc and the laptop but nothing gets past it.
View 19 Replies
View Related
Nov 18, 2012
I recently got a secure token to be able to connect to my desktop at work from home.The first couple of times I connected it worked well. Now when I try to connect it works for about 4 or 5 minutes then the remote session freezes up and the window won't update. Once it freezes I no longer can connect at all to my work PC until I physically go into the office and restart the computer. Our IT dept can't even connect to the work computer once that happens.
I'm trying to think of what could be causing this to happen when it worked fine the first couple of times.It could be a coincidence but the last couple of times this has happened I think I had just opened an IE web browser on the remote work pc but that could be unrelated and I don't see why that would affect it.The only thing that I can think of that has changed is on friday I got a juniper router and a Polycom IP phone so that I could use a work phone at home over my home network, however that should have any impact and the freeze up is happening remotely not at home.
Details:
I'm using a laptop at home running Windows 7 Ultimate
I connect to my work network using a web based ssl vpn web page logging in with an Aladdin Safeword token over IE9 using Juniper terminal services client software.
My home connection consists of a cable modem which has a wireless router plugged into it.Plugged into the ethernet port on the back of the router is a broadband-over-electric adapter that runs broadband over my electric current in the house. I then have a receiving adapter for that electric adapter running ethernet from the electric outlet into the Juniper router. The only thing plugged into the juniper router is the Polycom IP phone. My laptop connects wirelessly to the wireless router.
As you can see, with this setup the addition of the Juniper router/ip phone should have no impact on me connecting to my work network over the wireless connection so it is probably a coincidence. What could be causing the remote desktop session on my work machine to crash & stop accepting connections?
View 2 Replies
View Related
Jan 18, 2013
I have set up a Small business server environment for a client. One server in the network, it provides both DHCP, and DNS. Joined all of the XP machine to domain no worries. Tried to join the 7 machine and I get a "DNS couldn't be resolved" error. I know DNS is functioning properly on my server.
View 1 Replies
View Related
Mar 5, 2012
need drivers for dell vostro
View 1 Replies
View Related
Jan 7, 2011
Recently upgraded to Windows 7 Ultimate, but frustratingly i cannot detect my network.
Uninstalled and reinstalled drivers so many times, got a red x next to my network connections in my start bar. Everything in device manager saying the device is running fine. I've got an Intel 82566DC -2 Gigabit Network Connection.
View 2 Replies
View Related
Apr 2, 2013
I have just setup a new WLC 2504 controller to manage a WiFi service that will span 6 geographic locations. The local networks at each location are on different subnets (all 192.168.x.x) and are linked up via IPSEC VPN links, and there is Active Directory spanning the sites, with DNS and DHCP servers running at each location.
I tested the WLC at our main office with a single AP, and it worked fine. The AP set itself up, and wireless devices connect with no probs. Great! Yesterday I headed out to one of our remote sites, and connected an AP to their network - and that seemed to work fine too. Within a few minutes I was able to see the WiFi network I'd setup, and my smartphone connected to it straight away (as I'd rpeviously connected at the main office), so I was pretty happy that all was working well.
This morning however I've had notification that wifi performance at the remote site isn't great. I've got someone to check their ip address, and I've found that their IP address and default gateway match the LAN at the main office where the WLC is based - NOT the LAN where the wireless client is. Obvioulsy this is not ideal!
(I guess I HAVE done something wrong!?). And how can I get wireless clients at remote sites to pick up an IP from the DHCP server at THEIR site?
View 3 Replies
View Related
