Cisco Switching/Routing :: CE500 Setup With Windows 7 / Vista
Apr 27, 2010
For any still having trouble with the intial config of a CE500 Switch using Windows 7 / Vista...
Sure all of you have heard of the setup button and how to use it, its obvious Windows 7 / Vista do not properly recieve the DHCP, maybe an issue with the some new Microsoft legislation, the install address of the device in its setup phase, which you can read by the setup led burning steadily is 169.254.0.1
You wont be able to connect to this address in Windows 7 / Vista if you configure it statically, you will be able to view the Gratituous ARP from the Device using Wireshark, in the Windows 7 / Vista network adapter tci/ip v4 settings click on the advanced tab, there enter 169.254.0.1 as the default gateway, press the Setup button on the switch, wait for it to blink, connect your utp cable to port 1 check that the Setup LED is burning stable, type 169.254.0.1 into your web browser and enter a management IP address for the switch, alternatively use Cisco Network Assistant.
View 7 Replies
ADVERTISEMENT
Nov 27, 2011
I am trying to factory reset CE500 switch, as described in the factory rest section of the documentation. I do not get an IP address via DHCP from the switch.
On boot up I hold the setup button down, wait till the lights go solid amber release setup. wait for a port on the switch to start blinking green port 1 starts blinking green, plug my pc into port and wait for IP..and keep waiting !!!!
I have tried this on 3 switches now all with the same result.... NO IP offered.
View 1 Replies
View Related
Sep 8, 2010
configure port security Cisco 500 Swich ? There is no CLI mode in this switch?
View 2 Replies
View Related
Apr 19, 2012
I try change the configuration the port in the switch catalyst express 500, i need disable switch port port-security, a try with http://10.1.1.1/exec and save configuration with wr command, if a check the configuration de port is correct but i reboot the switch and check the configuration the port appear the switch port port-security configuration again.
View 3 Replies
View Related
Apr 10, 2013
I'm trying to do a Master reset on my Catalyst Express 500 (WS-CE500-24TT v01) and I'm having troubles with this. url...I do everything as it says, but when I plug the cable and I pull up the Web browser nothings appear, just the message that I don't have a Internet connection. The LED port on switch don't stop blinking as LED setup either. Is there another way to do the master reset?
View 0 Replies
View Related
Sep 8, 2012
using same network but don't see each other. Why?
View 2 Replies
View Related
Oct 26, 2011
I tried to do a a system recovery to my sis laptop a " emachine e620 " but the recovery cd didn't work so I used another vista cd the pc had " vista basic x86 " so I decided to install " vista ultimate x86 " everything was going fine until the pc said error setup cannot be completed I tried like 10 times so I decided to desable some devices and change the hard drive to in the bios to mointed I thik is call like that then the windows did a perfect install super fast now my problem is with the " network controller " I went to emachines drivers and support pick the rigth ones and my network controller still missing the drivers I can see the wifi saying on the screen off and on but not internet.
View 1 Replies
View Related
Jul 12, 2009
I am trying to setup a VPN using an RV042 (fw ver: 1.3.12.6) to access a VISTA computer over the internet using a laptop using QVPN's latest version. I finally got it to connect but then hang's with error " Gateway is not responding, do you want to wait?". If I say yes it go through the login again and hangs. If I say no, it hangsup. I've tried a couple different ideas using tunnelling and static IPs in the router but nothing. All I want is to be able to access one computer through the RV042 over the internet from any other computer using the QVPN.
View 6 Replies
View Related
Jul 31, 2012
My daughter is on an Army Base in the South Pacific. They have Dial up internet on their home telephone not DSL. They have high speed wireless at the base community center/coffee shop. I will be going there in 9 days to install the dir-615. She has a Dell Desktop with Vista Basic SP1, laptop with XP, IPAD2 and a NOOK Tablet. The dir-615 HVE1 with firmware 5.00na on the bottom sticker. She said she was able to go to web address, login, change the user name and password, started on the wireless configuration and she paniced. My question is basically this. by using a cat5 cable from the desktop to the dir-615 with dialup internet connected can the router be setup using the automatic method as opposed to manual. Our first priority is to be able transfer files to the 2 tablets without being connected to the internet like a switch and secondly If possible go on to the internet from a Tablet or the Laptop. I assume the second option would reuire internet sharing option when setting up the network and performance would be ugly.
Can get I get this router to work this way with just dialup to set it up
View 5 Replies
View Related
Oct 24, 2012
Setup CE500-24TT switch Port
FE2 router / ports
FE1,3-24 desktop / Ports
GE1-2 Switch ports - MAC filtering is NOT enabled.
8 Port G Switch = SBS2008 / Win2003 with Citrix / Win2K8 Management Server - plus a couple of desktops for Gig to server access.
I connected on the 8 port Gig SW a new Server running Windows 2012 Hyper-V and am not able to ping the PIX - I disabled the firewall and made sure the network location of the HV server is set properly. From the PIX if I try to ping the HV server it fails but I can do a sh arp and the MAC address of the HV server is there. I can ping the HV server from any other device connected to the Gig SW. I can not ping the CE500 from the HV server but I do see the HV server MAC address in the MAC table of the CE500 SW. I tried plugging the HV server into G1 on the CE500 and same thing - the MAC shows up on the correct port but no traffic seems to pass. I have had issues with this switch in the past where a printer would not communicate between the Gig ports and the FE ports - I moved the printer to the Gig switch and made all the users print via print server and forgot about it.
View 2 Replies
View Related
Jun 29, 2011
I have just recently replaced a WS-CE500-24LC switch with a SG200-50P. I have plugged in a Cisco 1760 router with a fast ethernet into the switch. On the console of the router I now see these messages: [code]
As far as I am aware both ends of the link are set to autonegotiate the speed and duplex.
View 2 Replies
View Related
Feb 21, 2013
I just got a new computer at work and it has Windows 8 on it. My old computer ran on XP and was connected to two different computers with access to the My Documents folder on each computer. That is all I need access to. I have tried everything to get my new computer set up so that I can have access to those two folders as they are extremely important for my job. I mapped the network drives from both computers to my new one and they access to my computer. When I worked from the Windows 8 computer and tried to access those computers I received an error message saying that access was denied and to contact my network administrator. I have access to other folders on the XP and Vista computer except the folder that I need to get into. I have brought in two different people who do freelance work and neither one was able to figure this problem out. For four days that I have been unable to properly do my job and I have just been emailing files and documents to myself. The XP and Vista computer do not need networked together either.
View 1 Replies
View Related
Apr 12, 2011
How can I disable UDP connections in Windows Vista and XP?
View 6 Replies
View Related
Mar 10, 2012
My laptop is unable to connect to the internet. It recognizes my wireless connection (public network) as "unidentified network" and Access: "Local only." I've tried using many other solutions but I still haven't found a way to fix this. My other laptops, computers, and gaming devices are able to connect to my linksys router except for this laptop. [code]
View 10 Replies
View Related
Apr 7, 2011
I have 2 computers, One running Vista 32, Desktop.Another, Laptop, Win 7 64bit.Both computers have given Error 651 when using PPPoE wired connections, usually at the peak of the day.My ISP says that Error 651 is the problem, while I am starting to think its the amount of bandwidth their giving my neighborhood/home.Also, can that dosen't work,how to fix the overall problem of my Internet shutting off at peak hours?
View 2 Replies
View Related
Feb 14, 2012
I have Virgin Media services, I had a problem with my cable, which an engineer was booked for, but it magically fixed itself, so I cancelled the engineer. The engineer turned up for the appointment, which I was out for, then urged me over the phone to keep his number, and call me if I had any problems. I got home an hour later and my modem wouldn't sync. My guess is he did something with it outside so he would still get paid for the job. I called him up, and he came round and instantly replaced my old Virgin modem (which I was using with my own Belkin wireless router) with a new Virgin (Netgear) hub.I'm giving this bit of background to demonstrate, everything was fine before. [code] Since getting the new hub, I set up the wireless connections on the laptop and console, and internet is working fine. However none of the devices can share with eachother.When I go to network on either computer, neither computer sees either computer.All the sharing settings that I had before are unchanged, all that has changed is my modem/router combo has been replaced by a hub.
View 14 Replies
View Related
Jan 16, 2011
I have my Windows 7 computer and my daughters computer with Windows Vista networked over a wired home LAN. For the most part, everything seems to work fine. I can access files on her computer, and she can access files from mine (photos, music, video, etc.). I set up a shortcut icons on her desktop for easy access to specific folders I am sharing on my computer. Unfortunately, when I share a folder on my computer, she is unable to view any files added after I initially shared it. So I routinely have to go in and share the folder again. It's not a huge issue, but it is annoying. The limitation seems to be one way, as I can access newly added files on her computer, without resharing.
View 2 Replies
View Related
Aug 13, 2011
I just reinstalled my windows vista 32bit laptop and installed all network driversRight now I am trying to connect with my ethernet cable (LAN). I clicked on network connections, the LAN is enabled and the driver name is shown but there is no connectivity. Also, the IPv4 and IPv6 is not connected
View 1 Replies
View Related
Apr 2, 2012
So my Dad got a new Windows 7 computer, and gave me his old windows vista. When we got his computer all hooked up, and hooked up the windows Vista next to it. My mom wanted to use it to check her email. she didnt download anything, but after she turned it off, and i turned it back on, the computer would not detect any type of internet activity. i put in a new ethernet card, and it still would not work. The sound on the computer has also stopped working. i checked windows audio service, and it says its running, and there is no detected problem with any of the hardware.
View 3 Replies
View Related
Jan 24, 2013
I have reloaded windows vista in my desktop. Every thing is working fine except that system is not detecting the lan cable. I have tried with a new cable but no luck.
View 1 Replies
View Related
May 14, 2011
a friend of mine has a USB printer (no WiFi and no Ethernet port) and is trying to use the printer from two different computers, without success. He turned to me for advice but I'm not really much use with networks.He's got the printer wired via the USB to his Windows 7 computer and that can print fine. But his Windows Vista computer shows the printer as offline no matter what he does. Both computers connect wirelessly to a router and have working internet connections. Both computers have the drivers and software installed (Epson RX520) and if he connects the Vista computer directly the printer via USB it works fine too. Both computers have fille and printer sharing activated. He just can't get it all networked together.He says it all used to network fine when he had his old desktop running XP but since replacing it with a Windows 7 system it will only work on one Computer or the other, not both.
View 2 Replies
View Related
May 21, 2011
got a new laptop and want to move files from an old one.Both are on the same wireless network, with the old laptop with the files having Vista, and the new one has Windows 7.I tried right clicking a folder in Vistaand 'shared' it, but don't see it on the Win 7 laptop?
View 3 Replies
View Related
Mar 2, 2013
I cannot access my Linksys with Windows 7 but can with Vista.
View 1 Replies
View Related
Jun 21, 2012
I wanna change ip address 192.168.1.1 on Vista, but I couldn't find the Internet Protocol (TCP / IP) Properties according to the instructions, to the Local Area Connection Properties and nothing.I don't know whether it's because of the vista. What should I do to change ip address 192.168.1.1?
View 4 Replies
View Related
Feb 10, 2012
how do i find my web key on my computer windows vista
View 1 Replies
View Related
Feb 23, 2012
My sister and brother live next door to each other and althought they both use my sisters wifi they want to be able to homegroup or network via wifi without either of them having to use the adsl cable from the router to their laptops.. I tried setting both computers up on a homegroup network but they cannot look at each others music and documents my sister has Win 7 64bit and my brother has Win vista 32 bit ? The win7 is in English so it does not seem to hard to find things. I downloaded for my sister -Advanced IPscanner - and Netcut but netcut does not seem to work on 64 bit and the IPscanner recognizes my brothers computer but will not shut it off - they wanted to be able to know when the other is online and also be able to cut one another off when they choose to.
View 1 Replies
View Related
May 21, 2013
I have a Cisco SG 300-20 as the core switch, layer 3. It is 192.168.4.6 on VLAN1 and 192.168.5.1 for VLAN2 (VOIP). All the ports are set in trunk mode. DHCP relay is setup on this switch.
The phones connected into a layer 2, Catalyst 2960-S switch. All ports are set in trunk mode. Default gateway on it is set to 192.168.5.1.
DHCP for both VLANs is provided by a Windows Server 2008 R2 server (the relay IP 192.168.4.15).
There is also an ASA 5510 in the mix which is 192.168.4.1. It has a route added to it for the 192.168.5.0 network to go to the SG 300 (192.168.5.1).
Just the two switches can ping each other on the 192.168.5.x network when I "add vlan 2" to the trunk port that is connected between the SG 300 and the 2960. The phones don't get DHCP on the 2960 switch. And I cannot ping 192.168.5.x from the ASA or anything else on the 192.168.4.x network.
After a bit of reading on intra-vlan routing for the SG 300 switch, I am thinking the SG 300 has to be the "center" of things so I need to make it 192.168.4.1 to be the gateway for both VLANs and change the ASA to 192.168.4.2 for VLAN1, etc. And I really can't do asymmetric routing with this switch.
View 1 Replies
View Related
Jan 19, 2013
I have a power conncet 6224 with routing enabled with several VLANs setup.VLAN Database: 6,8,10,90-254VLAN 6 is our management vlan10 is for our core network services (DNS, Domain, Exchange etc)90-254 are isolated vlans.What I need to accomplish is to prevent vlans 90-254 from communicating with each other and only allow communication to VLAN 10 and the internet. All internet firewall work will be handled by our Sonicwall. [code]
View 1 Replies
View Related
May 14, 2013
I'm trying to set up per vlan routing on a 3560G switch but it's not performing as I would expect. I've got a server on the 109 vlan with a 10.1.9.100 address and a default gateway of 10.1.9.1 this address is an HSRP gateway and currently resides on 10.1.9.7. When I traceroute through to my user PC on the internal network it receives a response from 10.1.9.7 However, it is then denied by an ACL on the internal firewall which has been applied to interface Eth0/0. It should arrive at the firewall on Eth0/2.109 as it has the 10.1.9.4 address.
My goal here is to route traffic on the 101 vlan to a seperate interface on the internal firewall from 109 vlan traffic. I'm either doing something wrong or these routing commands aren't designed to work in the way I'm expecting (I couldn't find any documentation on the ip route command where it is followed by different gateways for different vlans)
interface GigabitEthernet0/12
description Internal-FW Eth0/2
switchport trunk encapsulation dot1q
switchport trunk allowed vlan 109
switchport mode trunk(Code )
View 1 Replies
View Related
Oct 24, 2011
I have updated drivers or roll them back. Under computer, I right clicked on computer, then it shows like of hardware. Then I looked at date on driver and tried to update past june 27, 2006 or to roll many back . This increased my online speed but I could not get all drivers past that 2006 date & year, my computer thinks its the most updated version. It is not. This inability to change them or update still causes windows vista to be slower while operating. I guess I could buy the fix offered on web but I feel I shouldn't have to when I know the problem that microsolft built in. To bad microsoft isn't forth coming with an answer.
View 3 Replies
View Related
Jun 6, 2012
I am using Windows Vista service pack 2...not sure how to go about it, but realize when I click on FireFox in normal mode (and IE), I get a simple: "Firefox was unable to start..." message.
View 1 Replies
View Related
Mar 21, 2011
I am having trouble getting internet access on my daughters laptop. she has os vista while my pc is windows xp. keep getting connection unsuccessful...this computer is connected to dlink but does not have access to the internet. showing currently connected to unidentified network(dlink) access:local only. took it to a shop where the man connected to his internet straight away? This is what it says when i,ipconfig/all
View 3 Replies
View Related
Oct 15, 2012
I have just spent an hour with TalkTalk technical support being told that the new router they supplied today can only be used wirelessly for Vista or W7 but not both together. Am i going mad. Both connect to the router but my Vista laptop will not connect to the internet and will only show as an unidentified public network.
View 5 Replies
View Related
