Disable UDP Connections In Windows Vista And XP?Apr 12, 2011
How can I disable UDP connections in Windows Vista and XP?
How can I disable UDP connections in Windows Vista and XP?
I have just moved homes and I am unable to connect wirelessly to the internet through the network in my new house. The computer is connected to the network with excellent signal strength but access shows as local only and will not connect to the internet.
All other computers have been able to connect to the internet with no problems, and my computer will connect to other wifi connections, no problem.I can connect with a wire directly to the router, but no luck with wifi. I have also had this problem with one previous wifi network. I have tried many things, including taking the compter to a computer shop for them to look at and having another professional look at it, but so far no luck.
Tech Support Guy System Info Utility version 188.8.131.52 OS Version: Microsoft� Windows Vista� Home Premium , 32 bit Processor: Intel(R) Core(TM)2 Duo CPU T5550 @ 1.83GHz, x64 Family 6 Model 15 Stepping 13 Processor Count: 2 RAM: 2037 Mb Graphics Card: Mobile Intel(R) 965 Express Chipset Family, 448 Mb Hard Drives: C: Total - 102720 MB, Free - 27457 MB; D: Total - 11750 MB, Free - 1681 MB; Motherboard: Hewlett-Packard, 30D9, 83.21, CND8173S5Q Antivirus: AVG Anti-Virus Free, Updated: Yes, On-Demand Scanner: Enabled
We have a newly-purchased RVS4000 v2 with firmware v184.108.40.206. Its intended role is as a gateway between our local network of wired workstations and a Cisco 2800 series Integrated Services Router, which is at the receiving end of our T1 line. It is configured with static IPs on both the LAN and the WAN side. It does NOT serve DHCP for the LAN. Ever since I installed it, I have had repeated complaints from users of Vista and Win7 workstations that they lose internet connectivity about every 20 - 30 minutes or so. The only solution is to unplug the workstation's CAT5 cable, count to 30, and plug it back in. Then everything's hunky dory for another 20 - 30 minutes. Meanwhile, all our Windows XP and Linux workstations enjoy uninterrupted internet access. The router/gateway we replaced (a DLink DIR-130) never had this problem.View 4 Replies View Related
I use VNC all over my LAN.How do I make sure that it's secure and disable connections comming from outside my LAN?would forwarding the VNC port to a non-existing computer work? or would that just break my local VNC connections?I currently have some using ultravnc and some using tightvncView 1 Replies View Related
I have a wireless router (an Actiontec PK5000) and two desktop computers that connect with USB wireless adapters. I'm looking for a way to stop one of those computers from connecting wirelessly, without disconnecting the other.I used to have a wired ethernet connection, but since I've moved my computer to a different room I've had to rely on a wireless connection. Previously, I shut off the wireless in the house whenever other people were hogging bandwidth, but now that's not an option, as it would shut me down too.View 3 Replies View Related
using same network but don't see each other. Why?View 2 Replies View Related
How do I disable ICF In windows 2003View 1 Replies View Related
I can't download WAMP and am told Port 80 is blocking it. How can I resolve the problem?View 1 Replies View Related
I have to disable .exe file in the windows .For the users to prohibit to run any exe fileView 2 Replies View Related
I just got a new computer at work and it has Windows 8 on it. My old computer ran on XP and was connected to two different computers with access to the My Documents folder on each computer. That is all I need access to. I have tried everything to get my new computer set up so that I can have access to those two folders as they are extremely important for my job. I mapped the network drives from both computers to my new one and they access to my computer. When I worked from the Windows 8 computer and tried to access those computers I received an error message saying that access was denied and to contact my network administrator. I have access to other folders on the XP and Vista computer except the folder that I need to get into. I have brought in two different people who do freelance work and neither one was able to figure this problem out. For four days that I have been unable to properly do my job and I have just been emailing files and documents to myself. The XP and Vista computer do not need networked together either.View 1 Replies View Related
I want to disble changing IP in windows XP from registry so users can not change their IP adress. I use a workgroup and don't want to switch to Domain.View 3 Replies View Related
How do I disable Tunnel Adapters in windows 7?View 1 Replies View Related
My laptop is unable to connect to the internet. It recognizes my wireless connection (public network) as "unidentified network" and Access: "Local only." I've tried using many other solutions but I still haven't found a way to fix this. My other laptops, computers, and gaming devices are able to connect to my linksys router except for this laptop. [code]View 10 Replies View Related
I have 2 computers, One running Vista 32, Desktop.Another, Laptop, Win 7 64bit.Both computers have given Error 651 when using PPPoE wired connections, usually at the peak of the day.My ISP says that Error 651 is the problem, while I am starting to think its the amount of bandwidth their giving my neighborhood/home.Also, can that dosen't work,how to fix the overall problem of my Internet shutting off at peak hours?View 2 Replies View Related
I have Virgin Media services, I had a problem with my cable, which an engineer was booked for, but it magically fixed itself, so I cancelled the engineer. The engineer turned up for the appointment, which I was out for, then urged me over the phone to keep his number, and call me if I had any problems. I got home an hour later and my modem wouldn't sync. My guess is he did something with it outside so he would still get paid for the job. I called him up, and he came round and instantly replaced my old Virgin modem (which I was using with my own Belkin wireless router) with a new Virgin (Netgear) hub.I'm giving this bit of background to demonstrate, everything was fine before. [code] Since getting the new hub, I set up the wireless connections on the laptop and console, and internet is working fine. However none of the devices can share with eachother.When I go to network on either computer, neither computer sees either computer.All the sharing settings that I had before are unchanged, all that has changed is my modem/router combo has been replaced by a hub.View 14 Replies View Related
I have my Windows 7 computer and my daughters computer with Windows Vista networked over a wired home LAN. For the most part, everything seems to work fine. I can access files on her computer, and she can access files from mine (photos, music, video, etc.). I set up a shortcut icons on her desktop for easy access to specific folders I am sharing on my computer. Unfortunately, when I share a folder on my computer, she is unable to view any files added after I initially shared it. So I routinely have to go in and share the folder again. It's not a huge issue, but it is annoying. The limitation seems to be one way, as I can access newly added files on her computer, without resharing.View 2 Replies View Related
I just reinstalled my windows vista 32bit laptop and installed all network driversRight now I am trying to connect with my ethernet cable (LAN). I clicked on network connections, the LAN is enabled and the driver name is shown but there is no connectivity. Also, the IPv4 and IPv6 is not connectedView 1 Replies View Related
So my Dad got a new Windows 7 computer, and gave me his old windows vista. When we got his computer all hooked up, and hooked up the windows Vista next to it. My mom wanted to use it to check her email. she didnt download anything, but after she turned it off, and i turned it back on, the computer would not detect any type of internet activity. i put in a new ethernet card, and it still would not work. The sound on the computer has also stopped working. i checked windows audio service, and it says its running, and there is no detected problem with any of the hardware.View 3 Replies View Related
I have reloaded windows vista in my desktop. Every thing is working fine except that system is not detecting the lan cable. I have tried with a new cable but no luck.View 1 Replies View Related
a friend of mine has a USB printer (no WiFi and no Ethernet port) and is trying to use the printer from two different computers, without success. He turned to me for advice but I'm not really much use with networks.He's got the printer wired via the USB to his Windows 7 computer and that can print fine. But his Windows Vista computer shows the printer as offline no matter what he does. Both computers connect wirelessly to a router and have working internet connections. Both computers have the drivers and software installed (Epson RX520) and if he connects the Vista computer directly the printer via USB it works fine too. Both computers have fille and printer sharing activated. He just can't get it all networked together.He says it all used to network fine when he had his old desktop running XP but since replacing it with a Windows 7 system it will only work on one Computer or the other, not both.View 2 Replies View Related
got a new laptop and want to move files from an old one.Both are on the same wireless network, with the old laptop with the files having Vista, and the new one has Windows 7.I tried right clicking a folder in Vistaand 'shared' it, but don't see it on the Win 7 laptop?View 3 Replies View Related
I cannot access my Linksys with Windows 7 but can with Vista.View 1 Replies View Related
I wanna change ip address 192.168.1.1 on Vista, but I couldn't find the Internet Protocol (TCP / IP) Properties according to the instructions, to the Local Area Connection Properties and nothing.I don't know whether it's because of the vista. What should I do to change ip address 192.168.1.1?View 4 Replies View Related
how do i find my web key on my computer windows vistaView 1 Replies View Related
My sister and brother live next door to each other and althought they both use my sisters wifi they want to be able to homegroup or network via wifi without either of them having to use the adsl cable from the router to their laptops.. I tried setting both computers up on a homegroup network but they cannot look at each others music and documents my sister has Win 7 64bit and my brother has Win vista 32 bit ? The win7 is in English so it does not seem to hard to find things. I downloaded for my sister -Advanced IPscanner - and Netcut but netcut does not seem to work on 64 bit and the IPscanner recognizes my brothers computer but will not shut it off - they wanted to be able to know when the other is online and also be able to cut one another off when they choose to.View 1 Replies View Related
I have a Windows 7 64 Bit machine, and I cannot find a way to disable the IPv6 Loopback. I looked at the article at How to disable IP version 6 or its specific components in Windows and shows how to set HKEY_LOCAL_MACHINESYSTEMCurrentControlSetServicesTcpip6ParametersDisabledComponents to various values – but none of these seems to disable IPv6 Loopback. I attempted setting this value to 0xffffffff and 0x20 – restarting my computer after each change, and I still do not get this disabled.
I am using another software called Webdriver or Selenium that gives errors when debugging if IPv6 Loopback is not disabled. It seems to attempt to connect to [::1]:7055 and fails. Is there a way to force it to connect to 127.0.0.1.
I have updated drivers or roll them back. Under computer, I right clicked on computer, then it shows like of hardware. Then I looked at date on driver and tried to update past june 27, 2006 or to roll many back . This increased my online speed but I could not get all drivers past that 2006 date & year, my computer thinks its the most updated version. It is not. This inability to change them or update still causes windows vista to be slower while operating. I guess I could buy the fix offered on web but I feel I shouldn't have to when I know the problem that microsolft built in. To bad microsoft isn't forth coming with an answer.View 3 Replies View Related
I am using Windows Vista service pack 2...not sure how to go about it, but realize when I click on FireFox in normal mode (and IE), I get a simple: "Firefox was unable to start..." message.View 1 Replies View Related
I am having trouble getting internet access on my daughters laptop. she has os vista while my pc is windows xp. keep getting connection unsuccessful...this computer is connected to dlink but does not have access to the internet. showing currently connected to unidentified network(dlink) access:local only. took it to a shop where the man connected to his internet straight away? This is what it says when i,ipconfig/allView 3 Replies View Related
I have just spent an hour with TalkTalk technical support being told that the new router they supplied today can only be used wirelessly for Vista or W7 but not both together. Am i going mad. Both connect to the router but my Vista laptop will not connect to the internet and will only show as an unidentified public network.View 5 Replies View Related
I borrowed a laptop from my sister while my laptop is out of commission. I've been trying to use the wifi, but the connection keeps dropping. I've tried following different pieces of advice from the internet, and I still can't get it working[CODE]View 19 Replies View Related
I have windows vista and my modem is connected to a router it was working fine than all of a sudden I get a connection than I lose connection right after.View 1 Replies View Related
I am using Windows Vista.I work in a small office and our old computer guy set up our network. Not sure why, but he "hid" the two available wireless networks so they do not show up as available. How do I go about "unhiding" them? He left a folder on my computer that says "main router config" but it is a .bin file and I cannot open it. I did find out what our IP address is, but when I type it in the URL it does not show up.View 2 Replies View Related
The problem I was having was my laptop wouldn't connect to my new router provided by them, it would say it was connected but 'Local Only'. Turned out in the end all I needed to do was update my Atheros and Realtek drivers. Months down the line, now having the same symptoms, I decide to update my drivers only to find out there are no updates available and my drivers are up to date and working. The only other thing that may be the root to the this problem is the fact last night I connected to my girlfriends router at her house with this same laptop. Now I come back to my router this evening and I'm having these symptoms I had months ago. It's also saying the network is 'Undentified' eventhough it SAYS it's connected. It doesnt allow me to access the internet at all. I removed the history of my girlfriends connection on manage wireless networks, including my own.View 4 Replies View Related
System Info Utility version 220.127.116.11
HP s3240uk Pavilion Slimline
OS Version: Microsoft Windows 7 Professional , Service Pack 1, 64 bit
Processor: AMD Athlon(tm) 64 X2 Dual Core Processor 4400+, AMD64 Family 15 Model
I have found many well meaning suggestions to resolve this annoying aspect of networking between Windows 7, Vista and XP but it seems like we are all banging our heads against a brick wall. I have tried every suggestion I can find on other forums but still my Windows 7 computer cannot access my XP Home or Vista machines. The message I see each time I try is as follows:- "\WINXP (or \VISTA) is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have permissions. The account is not authorised to log in from this station." You will of course appreciate that the 'administrator' is myself. I can access files and a printer on Windows 7 from the other two computers providing I place shared files in the public folder ... no problem with this.
I have checked that all three computers have the same Workgroup Name. Yes, I have got Network Discovery turned on. Yes, I have turned on file and printer sharing. Yes, I have turned off Password protected sharing (and tried it turned on). Yes, I have set my network location to Work network. Yes, the computers I am trying to access do show in my network window ... each and everyone of them can be pinged from each other. I even have a little utility called Wireless Network Watcher that shows that the IP addresses, MAC addresses and each computer by name can be seen on the network.
I have had this issue for a while now and i have attempted many things even restoring Windows back to factory settings.My HP Windows laptop connects fine to my BT home hub 3 via wireless with no issues but the ethernet connection just recognises a local network and has no internet connectivity.my ethernet connection just never gets an IP address and always assigns itself a 169.x.x.x address.Originaly thinking it may be a hardware issue i booted into a Linux live cd to double check and the ethernet connection worked with no issues at all.I have tried numeorus things to try and resolve it-updated drivers / alternative drivers reset TCP/IP restored windows back to factory installation assiginged static IP address removed anti virus / firewall software different routerView 3 Replies View Related
I am trying to connect to the internet using both wifi and wired directly to the router and keep getting the same message "limited or no connectivity". It will see all the available wifi networks, and will even connect to the network, but no internet. I have used google and tried several solutions but to no avail. Also, just fyi, i currently have my desktop hardwired to router, and another laptop, ipad, ps3, wii, droid bionic and a couple of netbooks that all can connect to the router using wifi with no problem what so ever. I have also tried to connect to other networks with the same results. There are 2 network adapters, a broadcom netlink (tm) gigabit ethernet and a dell wireless 1397 wlan mini-card. Here is the ipconfig/all.View 16 Replies View Related
Was able to connect to my network fine a couple of days ago. Now It doesn't want to work.
Everytime I try it seems like I connected (the little blue globe symbol displays) but when I try and go to a webpage, the connection times out or moves slow. When I run diagnose and repair it tells me that this computer has "limited or no connectivity" even though I'm able to connect to other networks. Selecting the "automatically get new IP settings" and "reset network adapter" options don't work. After selecting these earlier it was telling me "unable to connect to primary DNS server", then it was telling me "windows has confirmed this computer is currently experiencing a network connectivity problem". Now it's telling me there is no problem in spite of the slow connection.
I don't think my wireless adapter is the issue, I'm able to connect to other networks fine. I don't think the router/modem is the issue, there's another computer in the house (that I don't own) as well as my xbox hooked up wireless to it with no problem.
I am having trouble connecting to the internet in Windows Vista Sp2. I have looked in device manager for any type of ethernet device, and I don't see one. I do not have a wireless adapter installed, but when I plug in an Ethernet cord I don't see any type of bubble saying I have new connections. I don't Even have the icon that should say local area connection in network connectionsView 19 Replies View Related
I am running windows vista on my HP laptop (not sure what kind of laptop it is it just says HP on it) it wil no longer connect to my wireless NETGEAR WNR2000v3 and when I do get it, its local only. I recently had virus infections removed from someone who used AVIRA and MBAM (malaware anti bytes)
edit I tried to disable the autoscaling feature in windows and it did not work /I am running windows vista home 32bit/I can connect to the router now I had the wrong security type selected WPA instead of WPA2, but it still reports local only, I checked my router logs and it shows that it connects but it does not give me information on if it is blocking the laptop from the internet or if my laptop is. I have tried turning off the windows firewall and resetting it as well now.
I have tried the things listed below
- uninstall and reinstall windows wireless adapter drivers through computer managment
- disablied IPv6 through wirless adapter properties (unchecking the box)
- reset my rounter entirely (after which I can no longer connect to the router at all, where as before I did this I was able to connect to my router but it was local only) held the reset button for 10 or more seconds plus unplugged my modem and router for 5 mins, I know its alot of time for that but I was eating but regardless, after which I turned on my modem let all the lights go through their setup then I turned on the router let all the lights do their thing, and then my laptop to make sure everything picked up new settings.
-something threw me off also under computer managment under the network adapters there were ipv6 to ipv4 "tunnels" or something, they had the yellow warning sign on it.
Can i connect xp, vista, & windows 7 on the same wireless router?View 1 Replies View Related
Do I turn on my wifi radio using windows vista with safari web browser?View 1 Replies View Related
Any way of getting drivers for aDWL-G120 drivers to work on vista?View 1 Replies View Related
I have a red x in "My Computer" at the network drive. cannot connect to it. what do you suggest. I am on a pere tp pere networkView 1 Replies View Related
I have one laptop (Windows Vista) and one PC (Windows 7) in my house and I am trying to share folders between them. The problem is I can access my laptop's files from my pc, but I can't access my pc's files from my laptop.
And when I go to Network and Sharing Center, on "View your active networks" part, I click joined to give check mark on Pictures, Music, Videos, Documents, and Printers (the default setting: only printers that got checked). After I checked those all, I click "Save changes". But, if I go back to click "Joined" It was set as default, it is like it doesn't save my setting.