when i tried to install ipv6 using dail up connection ,right click on properties scrolling networking tab checked internet protocol version 6(tcp/ipv6) and click install then select network features type is protocol selected . add - i have to choose from have disk- A: - browse- local file - system 32 here i donot know which .inf should i select .
View 1 Repliesneed drivers for dell vostro
View 1 Replies View RelatedSo one day i turned my computer on and the internet said unidentified network, i been using the same modem with Verizon it worked fine. I have disabled the adapter, unistalled it all that and still does not work, i tried to make a new connection it still does not work, im in school and my computer is how i submit my work. I have called technical support with verizon they said its my computer.
Ipv4 address 169.254.195.91
Subnet mask 255.255.0.0
I got a laptop with bluetooth (windows 7 ultimate), and a desktop with bluetooth dongle (windows xp pro)how do i setup a blue tooth LAN gaming.
View 3 Replies View RelatedI have windows 7 Ultimate , I have a wired ome network and haev a laptop and WD Live TV Hub on them but when I try and click on teh items under network in explorer it pops up with a enter network password, under which it wants a user name and password.i have added all the usernames and passwords I haev for the pc and the laptop but nothing gets past it.
View 19 Replies View RelatedI recently got a secure token to be able to connect to my desktop at work from home.The first couple of times I connected it worked well. Now when I try to connect it works for about 4 or 5 minutes then the remote session freezes up and the window won't update. Once it freezes I no longer can connect at all to my work PC until I physically go into the office and restart the computer. Our IT dept can't even connect to the work computer once that happens.
I'm trying to think of what could be causing this to happen when it worked fine the first couple of times.It could be a coincidence but the last couple of times this has happened I think I had just opened an IE web browser on the remote work pc but that could be unrelated and I don't see why that would affect it.The only thing that I can think of that has changed is on friday I got a juniper router and a Polycom IP phone so that I could use a work phone at home over my home network, however that should have any impact and the freeze up is happening remotely not at home.
Details:
I'm using a laptop at home running Windows 7 Ultimate
I connect to my work network using a web based ssl vpn web page logging in with an Aladdin Safeword token over IE9 using Juniper terminal services client software.
My home connection consists of a cable modem which has a wireless router plugged into it.Plugged into the ethernet port on the back of the router is a broadband-over-electric adapter that runs broadband over my electric current in the house. I then have a receiving adapter for that electric adapter running ethernet from the electric outlet into the Juniper router. The only thing plugged into the juniper router is the Polycom IP phone. My laptop connects wirelessly to the wireless router.
As you can see, with this setup the addition of the Juniper router/ip phone should have no impact on me connecting to my work network over the wireless connection so it is probably a coincidence. What could be causing the remote desktop session on my work machine to crash & stop accepting connections?
I have set up a Small business server environment for a client. One server in the network, it provides both DHCP, and DNS. Joined all of the XP machine to domain no worries. Tried to join the 7 machine and I get a "DNS couldn't be resolved" error. I know DNS is functioning properly on my server.
View 1 Replies View RelatedRecently upgraded to Windows 7 Ultimate, but frustratingly i cannot detect my network.
Uninstalled and reinstalled drivers so many times, got a red x next to my network connections in my start bar. Everything in device manager saying the device is running fine. I've got an Intel 82566DC -2 Gigabit Network Connection.
wat driver do i need to get connection via Ethernet connection
View 1 Replies View RelatedHow to get the Virtual Passage adapter to install and the VPN to work, I keep getting the install error for the Virtual Passage Adapter. I have the last and latest firmware installed, 1.1.12.1 and am running Win 7 Ultimate 64-bit. I previously had it working from within the same building where I am now in but somewhere in the IE upgrades or otherwise the adapter no longer installs. I have tried starting IE9 64-bit with administrator's rights, made the noted ActiveX and scripting security changes as noted in the manual for a Windows OS. I also have C++ 64-bit redistributable 2005 installed (also 2008 and 2010 for that matter if that would cause any conflict). I am running Norton 2012 Internet Security and SUPERantispyware which I don't think have any bearing on the situation but still thought I would note it. I do not have port 443 forwarded for any reason in the RVL200 setup which I learned RVL200 uses for the SSL VPN. I have tried removing the SSL drivers that were put in the Windows folder after the failed attempts of the Virtual Passage instal but with no luck in reinstalling.
View 2 Replies View RelatedI would like to use my WUSB54GC ver2 adapter with a WIN7 ultimate 64-bit PC. Do I have any chance to use it on this computer? Linksys' website says that only ver3 adapters can use the WIN7 driver.
View 3 Replies View RelatedI am using Dell Inspiron 4010 with Win7 Ultimate installed in it. what is run command to switch on the bluetooth?
View 1 Replies View Relatedi am having a sony vaio SVE151B11W with windows home basic.i have a atheros bluetooth driver,will a driver of different company work fine?
View 1 Replies View RelatedI have spend some time today trying to get my WMP600N-EU PCI Adapter installed. However up till now without any success. I run the installation CD with instructions, but the adapter is not found when I mount it into the PCI slot. I have tried both slots without success. Each time I get error 212.
View 8 Replies View RelatedI have 2 AE1000 USB adapters and according to the Linksys website these are wirelessN dual band selectable adapters. I finally hooked up my new e4200 dual band router and the ae1000 connect but I don't see anywhere on the screen in windows 7 ultimate 32bit that you can change the band?
View 1 Replies View Relatedi am unable to download proper driver for Inspiron 15 3521 win7 32-bit wifi driver.
View 5 Replies View RelatedHow to implement ipv6 on windows 7
View 1 Replies View RelatedWhen I try to ping ipv6.xsnews.nl on either of my Windows 7 computers, it returns "Ping request could not find host". But when I do it on XP, it succeeds. I have tried putting the W7 PC in the DMZ, disabling the software firewall but it doesn't work.
What I think it involves is having ipv6 installed on each. I tried to duplicate the setup of both the XP and a W7 computer, installing the gogo6 tunnel. But apparently it's not setup on this computer because the ping result is the same as on the third computer which hasn't had ipv6 installed. s not setup on this computer because the ping result is the same as on the third computer which hasn
I have a Windows 7 64 Bit machine, and I cannot find a way to disable the IPv6 Loopback. I looked at the article at How to disable IP version 6 or its specific components in Windows and shows how to set HKEY_LOCAL_MACHINESYSTEMCurrentControlSetServicesTcpip6ParametersDisabledComponents to various values – but none of these seems to disable IPv6 Loopback. I attempted setting this value to 0xffffffff and 0x20 – restarting my computer after each change, and I still do not get this disabled.
I am using another software called Webdriver or Selenium that gives errors when debugging if IPv6 Loopback is not disabled. It seems to attempt to connect to [::1]:7055 and fails. Is there a way to force it to connect to 127.0.0.1.
lan driver for windows 7
View 1 Replies View RelatedI need 802.11b wlan usb driver for windows 7
View 2 Replies View Relatedi would like to install wifi to my stand alone PC having XP?
View 1 Replies View Relatedhp 1300 printer driver for windows?
View 1 Replies View RelatedI Have A emachine with windows 7 and we had a storm and now i cant get on line so had a tec come to my house and he said my ethernet driver was not there i need to know how to burn one so i can put it back so i can get online?
View 1 Replies View Relatedsearching Atheros AR5B97 Wireless Driver for Windows XP on a Acer Travelmate 5330
View 1 Replies View Relatedi need the driver of dsl 2640u for windows 7 32bit
View 2 Replies View RelatedNetwork controller driver windows 7 64 bit?
View 2 Replies View RelatedI use a MS-6728-090 (865PE Neo2p) and can't find the right driver for the onboard lan.
View 1 Replies View RelatedWindows 7 ethernet controller driver?
View 1 Replies View RelatedFrom where I will get additional driver to share windows 7 pc to windows xp users
View 1 Replies View RelatedI'm trying to fix my wifes laptop. Not able to connect to the internet.hardware shows all network adapters have the caution yellow triangles.
View 1 Replies View Relatedwhy my atheros ar5b97 wireless connction is automatically connected to the internet even not open or on the launch manager.. and why the indicator lihts is still in orange color even i on the launch manager it seems its turn to blue lights.. many times i tried to unistall and install the driver but the problem is still in?
View 1 Replies View RelatedI have HP Deskjet 1280 which worked perfectly on my 32bit PCs, under XP and Vista. I updated both PCs to Windows 7, and have also a 64bit Desktop and a 64bit Laptop with Windows 7original .I tried to updte the driver using the driver update , but the HP Deskjet 1280 is not listed. The four PCs are networked with Network Magic.
View 1 Replies View Related