Cisco Routers :: RVL200 With Windows 7 Ultimate And IE 9 SSL VPN Not Working
Jan 29, 2012
How to get the Virtual Passage adapter to install and the VPN to work, I keep getting the install error for the Virtual Passage Adapter. I have the last and latest firmware installed, 1.1.12.1 and am running Win 7 Ultimate 64-bit. I previously had it working from within the same building where I am now in but somewhere in the IE upgrades or otherwise the adapter no longer installs. I have tried starting IE9 64-bit with administrator's rights, made the noted ActiveX and scripting security changes as noted in the manual for a Windows OS. I also have C++ 64-bit redistributable 2005 installed (also 2008 and 2010 for that matter if that would cause any conflict). I am running Norton 2012 Internet Security and SUPERantispyware which I don't think have any bearing on the situation but still thought I would note it. I do not have port 443 forwarded for any reason in the RVL200 setup which I learned RVL200 uses for the SSL VPN. I have tried removing the SSL drivers that were put in the Windows folder after the failed attempts of the Virtual Passage instal but with no luck in reinstalling.
View 2 Replies
ADVERTISEMENT
Dec 8, 2011
Tried everything .... beginning with updating to actual firmware, installing C++Redistr and all other tips I found.eg there are no ssldrv.* in the assumed directories .... there is a certificate which is outdated in the 1920th (lol) ... it´s true.Phone support is not avail .... because we use it a couple of years .... with xp and vista there is no prob?Perhaps there is a usefull handout/whitepaper available? I´ve followed this link, but that did not work:[URL]
View 1 Replies
View Related
Aug 18, 2011
when i tried to install ipv6 using dail up connection ,right click on properties scrolling networking tab checked internet protocol version 6(tcp/ipv6) and click install then select network features type is protocol selected . add - i have to choose from have disk- A: - browse- local file - system 32 here i donot know which .inf should i select .
View 1 Replies
View Related
Dec 16, 2012
So one day i turned my computer on and the internet said unidentified network, i been using the same modem with Verizon it worked fine. I have disabled the adapter, unistalled it all that and still does not work, i tried to make a new connection it still does not work, im in school and my computer is how i submit my work. I have called technical support with verizon they said its my computer.
Ipv4 address 169.254.195.91
Subnet mask 255.255.0.0
View 14 Replies
View Related
Aug 26, 2012
I got a laptop with bluetooth (windows 7 ultimate), and a desktop with bluetooth dongle (windows xp pro)how do i setup a blue tooth LAN gaming.
View 3 Replies
View Related
May 3, 2011
I have windows 7 Ultimate , I have a wired ome network and haev a laptop and WD Live TV Hub on them but when I try and click on teh items under network in explorer it pops up with a enter network password, under which it wants a user name and password.i have added all the usernames and passwords I haev for the pc and the laptop but nothing gets past it.
View 19 Replies
View Related
Nov 18, 2012
I recently got a secure token to be able to connect to my desktop at work from home.The first couple of times I connected it worked well. Now when I try to connect it works for about 4 or 5 minutes then the remote session freezes up and the window won't update. Once it freezes I no longer can connect at all to my work PC until I physically go into the office and restart the computer. Our IT dept can't even connect to the work computer once that happens.
I'm trying to think of what could be causing this to happen when it worked fine the first couple of times.It could be a coincidence but the last couple of times this has happened I think I had just opened an IE web browser on the remote work pc but that could be unrelated and I don't see why that would affect it.The only thing that I can think of that has changed is on friday I got a juniper router and a Polycom IP phone so that I could use a work phone at home over my home network, however that should have any impact and the freeze up is happening remotely not at home.
Details:
I'm using a laptop at home running Windows 7 Ultimate
I connect to my work network using a web based ssl vpn web page logging in with an Aladdin Safeword token over IE9 using Juniper terminal services client software.
My home connection consists of a cable modem which has a wireless router plugged into it.Plugged into the ethernet port on the back of the router is a broadband-over-electric adapter that runs broadband over my electric current in the house. I then have a receiving adapter for that electric adapter running ethernet from the electric outlet into the Juniper router. The only thing plugged into the juniper router is the Polycom IP phone. My laptop connects wirelessly to the wireless router.
As you can see, with this setup the addition of the Juniper router/ip phone should have no impact on me connecting to my work network over the wireless connection so it is probably a coincidence. What could be causing the remote desktop session on my work machine to crash & stop accepting connections?
View 2 Replies
View Related
Jan 18, 2013
I have set up a Small business server environment for a client. One server in the network, it provides both DHCP, and DNS. Joined all of the XP machine to domain no worries. Tried to join the 7 machine and I get a "DNS couldn't be resolved" error. I know DNS is functioning properly on my server.
View 1 Replies
View Related
Mar 5, 2012
need drivers for dell vostro
View 1 Replies
View Related
Jan 7, 2011
Recently upgraded to Windows 7 Ultimate, but frustratingly i cannot detect my network.
Uninstalled and reinstalled drivers so many times, got a red x next to my network connections in my start bar. Everything in device manager saying the device is running fine. I've got an Intel 82566DC -2 Gigabit Network Connection.
View 2 Replies
View Related
Jan 6, 2013
rvl200 is not working with any new os/java. cisco is not fixing and telling us to move on.picked up a vpn server and placed it on the dmz for rvl200 (on 192.168.1.105). for the life of me, can not get traffic from the outside to go to this server. tried port forwarding on rvl200 (for 443) which is what the vpn server recommends. rvl200 is not allowing this. can not go through the ssl vpn on rvl200 since it does not work. looked at rv042 topics and it shows similar problems.
View 1 Replies
View Related
Apr 4, 2011
I got problem with RVL200, he works good on my botch mac's witch OSX 10.5,10.6 and Firefox 3.6 but stop working after last java update. The machine witch 10.5 is working because I don't update Java but the other computer is up-to-date.
Problem is with lunching the Java applet ,all the rest is working.- I'm login to SSL VPN Tunnel- The new window is opening I accept applet to run.He try but nothing happends the window is bank with no connect / disconnect buttons. [code] I have all the rights / permission to vpclient catalogue and files in there.I try this on root to the same error
View 12 Replies
View Related
Apr 2, 2012
wat driver do i need to get connection via Ethernet connection
View 1 Replies
View Related
Oct 9, 2011
RVL200 firmware 1.1.12.1 iPad2 cannot access any device on the remote LAN despite the closed padlock icon.Is there another App needed ? Or how to debug the SSL VPN ?
View 2 Replies
View Related
Sep 19, 2011
i have an rvl200 Router and the ssl-vpn-tunnel is working fine under windows and linux.Now i bought a Nexus S with Android 2.3.3 and would like to create an vpn- connection to my router too.But the Applet, like on linux is not starting.
View 2 Replies
View Related
Apr 6, 2011
I would like to use my WUSB54GC ver2 adapter with a WIN7 ultimate 64-bit PC. Do I have any chance to use it on this computer? Linksys' website says that only ver3 adapters can use the WIN7 driver.
View 3 Replies
View Related
Nov 29, 2011
which current SB routers support these features known from RVL200 and RV0XX v. 1.X?:
Block MAC address on the list with wrong IP address
Block MAC address not on the list
View 1 Replies
View Related
Aug 26, 2011
I am using Dell Inspiron 4010 with Win7 Ultimate installed in it. what is run command to switch on the bluetooth?
View 1 Replies
View Related
Sep 5, 2012
i am having a sony vaio SVE151B11W with windows home basic.i have a atheros bluetooth driver,will a driver of different company work fine?
View 1 Replies
View Related
Dec 26, 2009
I have spend some time today trying to get my WMP600N-EU PCI Adapter installed. However up till now without any success. I run the installation CD with instructions, but the adapter is not found when I mount it into the PCI slot. I have tried both slots without success. Each time I get error 212.
View 8 Replies
View Related
Jan 2, 2013
Is it at all possible to channel all/some data traffic through an established ipsec tunneled connection using the RVL200? I have successfully established an ipsec connection through RVL200 and RV042 routers and are able to connect to servers/computers behind it.Now I want to channel all or some traffic through the ipsec-tunnel for computers that reside on 192.168.1.0 subnet of RVL200 network.
Main office - RV042 router - 10.200.62.1
Remote office - RVL200 router - 192.168.1.1
I am trying to use the Advanced Routing option to add static routes but I am not 100% sure if I am configuring the routes correctly.To give an example of routing DNS requests for HOTMAIL.COM [65.55.72.183]: [code]For some reason this does not appear to work. I have also tried using the interface setting of WAN and tested - this also does not work.
View 10 Replies
View Related
Aug 15, 2011
I have 2 AE1000 USB adapters and according to the Linksys website these are wirelessN dual band selectable adapters. I finally hooked up my new e4200 dual band router and the ae1000 connect but I don't see anywhere on the screen in windows 7 ultimate 32bit that you can change the band?
View 1 Replies
View Related
Nov 16, 2010
I use RDP extensively on my LAN to use and manage 4 PCs running Win XP or Win7. My consumer-grade Cisco Linksys WRT610n crapped out after less than 2 years, so I thought I'd try the Cisco WRVS4400N to gain extra features like VPN. I have not enabled anything new on the router except for adding a second wireless SSID for guest use, although no bandwidth management or VLANs have been set up yet. Firmware version is 2.0.0.8.Since installing this router I have been unable to use Windows RDP on ANY of my computers on the LAN, whether I use the machine name or the IP address. I can ping every device on my network - print servers, NAS boxes, PCs, but no RDP. WHAT'S GOING ON?
View 6 Replies
View Related
Jun 1, 2013
after going through the several troubleshooting steps (un/reinstall driver; download a fresh setup; comb thru all network and internet settings; multiple cold re-boots; system restore etc.) While the adapter shows up in device mgr, only getting error msg that there is a problem with the driver.Did try several ways to find out where the hang-up was, and only get the driver error.Using Windows7 Home Premium-all updated.Was using my ethernet to my LAN previously.
View 1 Replies
View Related
Feb 2, 2011
I maintain a small network - 11 clients and 1 server. The server is a WS2008R2 domain controller - the clients login to the server as active directory user. Now there is a need to connect a remote location to the network. The primary site has a DSL connection with a static IP and a cheap router. The remote site has DSL with dynamic IP and the same router. I bought two RVL200 routers thinking this would do the job. The plan is to replace the existing routers at each location with the RVL200's, configure a VPN tunnel between the routers, and thereby "virtually" connect the remote location to the network.
1) Is this plan as described doable?
2) How do the remote client machines "see" the network. Do they actually think they are on the primary site's LAN?
2a) Where will the remote client get its IP address? I'm assuming from its own RVL200 ... but then it will obviously not be on the same subnet as the primary site - so how will it access the server, etc.?
3) Can ALL traffic - not just "intranet" traffic - be routed over the VPN tunnel? (Will that happen automatically?)
3a) The reason for 3 is ... they do per-user internet access control through software running on the server, so they want to force all internet access from these remote clients to go through the same path as the local clients at the primary site.
View 1 Replies
View Related
May 22, 2012
I'm trying to set up a permanent VPN connection for an Expat. We've got an RV042 set up on site to act as the server, and an RVL200 as a client. This RVL200 will be behind a home router, so it needs to initiate the connection every time; the site side router won't be able to see it behind the Expat's home router.I've got a PPTP server set up on the RV042, and I'm trying to get the RVL200 to connect to it as a client. Is there any way to do so, or will we need to go with another option? Because on the RV042, I see no way to set up an SSL server of any kind; only a direct SSL Tunnel, which won't work as again, the RV042 will not be able to see the RVL200.
View 1 Replies
View Related
Dec 26, 2010
Linksys Small Business VPN endpoint routers?
I have been trying for two days to setup a Linksys RVS4000 to a RVL200 IPSec tunnel and I can't get them to connect.
The internet is via optimum online home internet accounts. From what Cisco said, the ports necessary are 500, 4500, 443 and 60443.
View 17 Replies
View Related
Sep 18, 2011
I have two new RVL200's with 1.1.12.1 firmware on it. Every time we use Logmein to remote a pc on the LAN it locks the router up and has to be power cycled. I have reinstalled the latest firmware 1.1.12.1 and this has not worked.
View 1 Replies
View Related
May 15, 2007
We have a main and branch office, each with an RVL200 . I configured both with static IP's as provided by my ISP, yet when I try to do a test connection on the IPSec screen I just get that it's "waiting for a connection" in the cell third from the left. Both RVL200 's are connected directly to the modem/bridge supplied by both ISP's.
View 5 Replies
View Related
Jan 17, 2011
Bought a Cisco RVL200 (latest firmware included - I checked), and I've set it up to serve as the gateway/firewall for my home network. I also intend to use the VPN functionality when travelling as well as serving up content from a web server behind it. All of this seems to work the way it is intended (after quite a bit of fiddling).
The problem however is that if it comes under any sort of load it simply stops responding - physically it looks alright with the expected leds being lit, just as it would when functioning normally. It does not display the management interface, nor does it even respond to ping (which it does when it works). If I start up a bittorrent client on any of the machines on the internal network and add a torrent to something popular like Ubuntu Linux it'll usually start downloading and then after 5-15 minutes the RVL200 will have stopped responding. Tried adding QOS settings to limit the computer running the client or downprioritize this type of traffic, but that does not seem to have any effect.
View 1 Replies
View Related
Jun 7, 2012
tell me the most advanced the udp and tcp open port scanner of my network ?
View 2 Replies
View Related
Jul 25, 2011
if the firewall rules in the RVL200 work for inter LAN routing as well as LAN<->WAN? I need 2 separate networks in a house, 1 for business 1 for family, and I want to only allow my IP on network 1 (family net,10.0.0.0/24) access to network 2 (business net 10.0.1.0/24). I want this as if I change rooms were a access point for business is not available I can use the home net and specific IP to access certain business net IPs. I saw you can turn inter vlan routing on or off, but it wasn't clear on firewall rules.know of a similar router in cost but with gige instead of 100Mb ports?
View 1 Replies
View Related
Jun 23, 2012
My broadband seems to have stopped uploading data. I run broadbandspeedchecker and it shows download of 8 and then upload doesn't work at all and shows 0.I can browse some pages, but don't have full use of all pages like my CMSA admin, can log into my hosting using FTP, but can't access directories, Skype doesn't connect.Even stranger is it all works for a few seconds, even connecting Skype, but then stops again.I have completed a few system restores going back a week before the initial problem and still no joy!
View 7 Replies
View Related
