Cisco Routers :: Putting A Vpn Server Behind Rvl200
Jan 6, 2013
rvl200 is not working with any new os/java. cisco is not fixing and telling us to move on.picked up a vpn server and placed it on the dmz for rvl200 (on 192.168.1.105). for the life of me, can not get traffic from the outside to go to this server. tried port forwarding on rvl200 (for 443) which is what the vpn server recommends. rvl200 is not allowing this. can not go through the ssl vpn on rvl200 since it does not work. looked at rv042 topics and it shows similar problems.
View 1 Replies
ADVERTISEMENT
Apr 26, 2011
I just got a server cabinet from a friend and i am going to put all my networking stuff in there i want to put my router inside it too but im not sure if it will affect the signal the cabinet is made out of metal but not thick.
View 2 Replies
View Related
Dec 8, 2011
Tried everything .... beginning with updating to actual firmware, installing C++Redistr and all other tips I found.eg there are no ssldrv.* in the assumed directories .... there is a certificate which is outdated in the 1920th (lol) ... it´s true.Phone support is not avail .... because we use it a couple of years .... with xp and vista there is no prob?Perhaps there is a usefull handout/whitepaper available? I´ve followed this link, but that did not work:[URL]
View 1 Replies
View Related
Apr 4, 2011
I got problem with RVL200, he works good on my botch mac's witch OSX 10.5,10.6 and Firefox 3.6 but stop working after last java update. The machine witch 10.5 is working because I don't update Java but the other computer is up-to-date.
Problem is with lunching the Java applet ,all the rest is working.- I'm login to SSL VPN Tunnel- The new window is opening I accept applet to run.He try but nothing happends the window is bank with no connect / disconnect buttons. [code] I have all the rights / permission to vpclient catalogue and files in there.I try this on root to the same error
View 12 Replies
View Related
Jan 29, 2012
How to get the Virtual Passage adapter to install and the VPN to work, I keep getting the install error for the Virtual Passage Adapter. I have the last and latest firmware installed, 1.1.12.1 and am running Win 7 Ultimate 64-bit. I previously had it working from within the same building where I am now in but somewhere in the IE upgrades or otherwise the adapter no longer installs. I have tried starting IE9 64-bit with administrator's rights, made the noted ActiveX and scripting security changes as noted in the manual for a Windows OS. I also have C++ 64-bit redistributable 2005 installed (also 2008 and 2010 for that matter if that would cause any conflict). I am running Norton 2012 Internet Security and SUPERantispyware which I don't think have any bearing on the situation but still thought I would note it. I do not have port 443 forwarded for any reason in the RVL200 setup which I learned RVL200 uses for the SSL VPN. I have tried removing the SSL drivers that were put in the Windows folder after the failed attempts of the Virtual Passage instal but with no luck in reinstalling.
View 2 Replies
View Related
Oct 9, 2011
RVL200 firmware 1.1.12.1 iPad2 cannot access any device on the remote LAN despite the closed padlock icon.Is there another App needed ? Or how to debug the SSL VPN ?
View 2 Replies
View Related
Sep 19, 2011
i have an rvl200 Router and the ssl-vpn-tunnel is working fine under windows and linux.Now i bought a Nexus S with Android 2.3.3 and would like to create an vpn- connection to my router too.But the Applet, like on linux is not starting.
View 2 Replies
View Related
Nov 29, 2011
which current SB routers support these features known from RVL200 and RV0XX v. 1.X?:
Block MAC address on the list with wrong IP address
Block MAC address not on the list
View 1 Replies
View Related
Jan 2, 2013
Is it at all possible to channel all/some data traffic through an established ipsec tunneled connection using the RVL200? I have successfully established an ipsec connection through RVL200 and RV042 routers and are able to connect to servers/computers behind it.Now I want to channel all or some traffic through the ipsec-tunnel for computers that reside on 192.168.1.0 subnet of RVL200 network.
Main office - RV042 router - 10.200.62.1
Remote office - RVL200 router - 192.168.1.1
I am trying to use the Advanced Routing option to add static routes but I am not 100% sure if I am configuring the routes correctly.To give an example of routing DNS requests for HOTMAIL.COM [65.55.72.183]: [code]For some reason this does not appear to work. I have also tried using the interface setting of WAN and tested - this also does not work.
View 10 Replies
View Related
Feb 2, 2011
I maintain a small network - 11 clients and 1 server. The server is a WS2008R2 domain controller - the clients login to the server as active directory user. Now there is a need to connect a remote location to the network. The primary site has a DSL connection with a static IP and a cheap router. The remote site has DSL with dynamic IP and the same router. I bought two RVL200 routers thinking this would do the job. The plan is to replace the existing routers at each location with the RVL200's, configure a VPN tunnel between the routers, and thereby "virtually" connect the remote location to the network.
1) Is this plan as described doable?
2) How do the remote client machines "see" the network. Do they actually think they are on the primary site's LAN?
2a) Where will the remote client get its IP address? I'm assuming from its own RVL200 ... but then it will obviously not be on the same subnet as the primary site - so how will it access the server, etc.?
3) Can ALL traffic - not just "intranet" traffic - be routed over the VPN tunnel? (Will that happen automatically?)
3a) The reason for 3 is ... they do per-user internet access control through software running on the server, so they want to force all internet access from these remote clients to go through the same path as the local clients at the primary site.
View 1 Replies
View Related
May 22, 2012
I'm trying to set up a permanent VPN connection for an Expat. We've got an RV042 set up on site to act as the server, and an RVL200 as a client. This RVL200 will be behind a home router, so it needs to initiate the connection every time; the site side router won't be able to see it behind the Expat's home router.I've got a PPTP server set up on the RV042, and I'm trying to get the RVL200 to connect to it as a client. Is there any way to do so, or will we need to go with another option? Because on the RV042, I see no way to set up an SSL server of any kind; only a direct SSL Tunnel, which won't work as again, the RV042 will not be able to see the RVL200.
View 1 Replies
View Related
Jan 25, 2012
I am in the process of adding a lot of servers to sit behind our new ASA 5505 (8.4) firewall. At the moment I have added 2 servers and they are both NAT'ed to 2 different public IPs.
Server 1 192.168.10.1 -> 80.*.*.1
Server 2 192.168.10.111 -> 80.*.*.6
The first server can only be RDP'ed in to using its public IP which is what I want it to do. The second one has most of the service ports open like 443, 80, 110, 25 and etc. However when I try and browse externally to [URL]. I get an " Error 107(net::ERR_SSL_PROTOCOL_ERROR): SSL protocol error." in Google Chrome or any other browser. and the ASA reports:11:27:30192.168.10.111262680.*.*.6443Inbound TCP connection denied from 192.168.10.111/2626 to 80.*.*.6/443 flags SYN on interface inside and I also get a Land to Land attack detected from 80.*.*.6 to 80.*.*.6
Is it worth setting up a DMZ or can I get away with the setup I have?
View 2 Replies
View Related
Jan 9, 2011
How to restrict my Router by putting in a Pass word so my neighbours could be stopped using my highspeed internet and thus makinit weaker for my household.
View 3 Replies
View Related
Mar 14, 2011
I am an administrator and my co-worker keeps on going on you tube during work. Is there any way to make his computer only use up 20KB per second instead of 150 KB per second?
View 6 Replies
View Related
Nov 7, 2011
I have a Dell Wireless Router, yes I know terrible lmao but was free a laptop I bought my sister. Anyways, it does not seem to be putting out a wireless signal.However if hook an ethernet cord from the modem, to my parents pc, eliminating the router completely, the internet works, this is how the set up usually is. I have my pc upstairs with a wireless card and have never had problems until now.When I hook up the wireless router, the internet light, lights up etc. But on the main computer that is hardwired, loses internet. It just has "Limited Connectivity".I tried resetting, powering off, restarting. I tried to set up a new wireless network and the computer cannot find any wireless devices. My computer upstairs cannot find a wireless network either.We also have a wireless "Roku" box which is netflix, this works off wi-fi, but this also cannot get a wireless connection.
Ive tried typing in the routers ip just guession that is the 192.168.1.1, I have tried a bunch of others but cannot get into my routers settings. I am trying to get into those router settings thru my browser, Im trying to figure out the ip. However if I hook my router up I lose internet so i am un-able to do that.I build PC's and service them, but networking is where my expertise end.
View 2 Replies
View Related
Jan 12, 2011
The laptops that normally run from the Linksys network are not showing any network at all. The "Easy Link Advisor" says the network is working.
View 2 Replies
View Related
Feb 12, 2013
Previously we had a 5512 ASA setup and working properly. We had several internal address static nat'd to external address and were able to access our servers externally. Unfortunatley, when it came time to setup our site to site vpn we found out our ISP was blocking the necessary traffic on the IP we were using for the ASA's outside interface. We ended up having to buy a RV180 to act as a dummy router to assign the restricted IP to on its outside interface and put the ASA behind it so we could assign it an unrestricted IP for it's outside interface for the site to site vpn.
The problem is our NAT and access rules are no longer working. Internet access works fine however. We haven't even set the site to site vpn stuff up yet either. What do we need to change in either the ASA or the router to get this working again. I don't even know where to begin with providing any pertinent information for diagnosing the problem.
View 1 Replies
View Related
Feb 12, 2013
I am using webauth and need to install a SSL cert to prevent the "There is a problem with this website's security certificate" message. I have a Wildcard cert that was issued by Network Solutions that I use on a couple web servers I run, and want to know if I can use that for the WLC? It's a pks cert and I think the WLC needs to use a pem cert, so I converted the wildcard to pem. Or do I need to purchase a cert that is not a wildcard and is in pem format?
View 7 Replies
View Related
Apr 17, 2012
I'm implementing and found out some issues are unresolvable on ACE4710. This network have been running on a server without LB. Now the second server comes up. We choosed to implement with Routed Mode.This network Peak @ 300Mbps. Now on we're doing the first context which is function as content web-farm. In near future, 2nd context which takes care of indexing web-farm when they buy more server.
From following diagrams.I browsed from internet into this service. "show service-policy" shown as '0' (counter was not running). I guessed that there is something wrong in FW configuration. So I isolated out FW. Then I plugged-in my PC into network 30 (192.168.30.X) in front of this LB, then browsed into LB's VIP (192.168.30.1). LB "show service-policy" came up BUT there is nothing return to my PC (client). "show conn" on LB as "SYNSEEN". What's SYNSEEN?! Some meaningful.
Then I tried to figure out with a PC running 'apache' and took the place of real server. "It works!" returned from LB/Server. "show conn" became 'Establish' Programmer guy said if I browse into web-farm (i.e. content web-farm) directly pkt will be redirected to indexing server. But they said it will be L7 redirection. Not LB/Network level.
View 5 Replies
View Related
Dec 26, 2010
Linksys Small Business VPN endpoint routers?
I have been trying for two days to setup a Linksys RVS4000 to a RVL200 IPSec tunnel and I can't get them to connect.
The internet is via optimum online home internet accounts. From what Cisco said, the ports necessary are 500, 4500, 443 and 60443.
View 17 Replies
View Related
Dec 29, 2011
Today I'm going to be re-organzing my network, kind of and I just wanted to get a second opinon. Right now I have an ASA 5510 and a Cisco 2911 and a Cisco 2960 (and I have two more 2911s and 2960s that handles our phone network).
Router 2911 is on the edge Gi0/0 has the public IP and Gi0/1 is not used and then I have 5 individual VLANs (Gi0/1.100, 1.200, 1.300, 1.400, 1.500) VLAN 100 is our internal network 10.10.18.1/24 (router is 10.10.18.1)And the 2960 is used for swichport access, the ASA is on the side and only used as a VPN.
What I want to do is put the ASA on the edge so I can dump all the access-lists and everything then 2911 will only be used to route the traffic. Now I know I will have to reconfigure the VPN, which isn't a problem. My question is when putting the ASA on the edge do I just put the public IP on the ASA's e0/0 and then plug the 2911 into the e0/1 of the ASA and give the Gi0/0 of the 2911 the ip address of 10.10.18.1 or do I just shut it down? The reason behind this is because I would actually like to use the ASA for more than just the VPN passthrough.
View 6 Replies
View Related
Oct 5, 2011
I have a problem putting a Cisco 1141 AP in repeater mode with a AP HP Procurve.Root AP is a the Procurve, but when try to put the Cisco AP with same SSID, Authentication, etc, I receive this error:
%DOT11-4-CANT_ASSOC: Interface Dot11Radio0, cannot associate: NO Aironet Extension IE
I try disable the Aironet Extensions and always get the same error all time. It's possible connect both APs?
View 6 Replies
View Related
Sep 18, 2011
I have two new RVL200's with 1.1.12.1 firmware on it. Every time we use Logmein to remote a pc on the LAN it locks the router up and has to be power cycled. I have reinstalled the latest firmware 1.1.12.1 and this has not worked.
View 1 Replies
View Related
May 15, 2007
We have a main and branch office, each with an RVL200 . I configured both with static IP's as provided by my ISP, yet when I try to do a test connection on the IPSec screen I just get that it's "waiting for a connection" in the cell third from the left. Both RVL200 's are connected directly to the modem/bridge supplied by both ISP's.
View 5 Replies
View Related
Jan 17, 2011
Bought a Cisco RVL200 (latest firmware included - I checked), and I've set it up to serve as the gateway/firewall for my home network. I also intend to use the VPN functionality when travelling as well as serving up content from a web server behind it. All of this seems to work the way it is intended (after quite a bit of fiddling).
The problem however is that if it comes under any sort of load it simply stops responding - physically it looks alright with the expected leds being lit, just as it would when functioning normally. It does not display the management interface, nor does it even respond to ping (which it does when it works). If I start up a bittorrent client on any of the machines on the internal network and add a torrent to something popular like Ubuntu Linux it'll usually start downloading and then after 5-15 minutes the RVL200 will have stopped responding. Tried adding QOS settings to limit the computer running the client or downprioritize this type of traffic, but that does not seem to have any effect.
View 1 Replies
View Related
Nov 6, 2011
I would like to know if it is feasible to put those Aironet AP with internet antenna like AP1142 / AP1042 in a enclosure box (Like IP66 grade) box. Will those enclosure box absorb the Radio signal from the AP? or the Radio signal can still survive after passing the box but the Signal Strength be degraded only?
View 2 Replies
View Related
Jul 25, 2011
if the firewall rules in the RVL200 work for inter LAN routing as well as LAN<->WAN? I need 2 separate networks in a house, 1 for business 1 for family, and I want to only allow my IP on network 1 (family net,10.0.0.0/24) access to network 2 (business net 10.0.1.0/24). I want this as if I change rooms were a access point for business is not available I can use the home net and specific IP to access certain business net IPs. I saw you can turn inter vlan routing on or off, but it wasn't clear on firewall rules.know of a similar router in cost but with gige instead of 100Mb ports?
View 1 Replies
View Related
Mar 28, 2012
I have a Catalyst 2950G when I activate the switchport port-security, but I want to empty the black list of mac address because every time I connect a device, the port is automatically désacative, here is the port configuration:
!
interface FastEthernet0 / 2
switchport access vlan 17
switchport mode access
switchport voice vlan 51
[code]....
I tried the following commands to clear the blacklist mac address of that port, but the problem is still relevant:
# Clear mac-address-table dynamic int fa0 / 2
# clear port-security all int fastethernet 0/2
# clear errdisable interface fa0 / 2 vlan
View 17 Replies
View Related
Feb 12, 2012
I have a couple of WS-C3750X-48T-L and a couple of WS-C3750X-12S-S, I want to stack all four of them together into a single stack. WS- C3750X-12S-S are running c3750e-universalk9-mz.122-58.SE2 whereas WS-C3750X-48T-L are running c3750e-universalk9-mz.122-55.SE3.I have got a couple of queries as under:What are the options to achieve putting all these 4 switches into a single stack? Can the LAN Base switches upgraded to IP Base?
View 3 Replies
View Related
Jan 13, 2012
I have a number of existing 4506 chassis type switches (the older non -E version) that I would like to roll out IP phones to. Instead of replacing the entire chassis, I would like to just replace the line cards in the switches with WS-X4548-GB-RJ45V. What or how much power supplies should I have in each switch to be able to power the 5 poe line cards (each port per line card will power an ip phone)?
View 6 Replies
View Related
Apr 4, 2011
I got problem with RVL200, it works good on my botch mac's witch OSX 10.5,10.6 and Firefox 3.6 but stops working after last java update. The machine switch 10.5 is working because I don't update Java but the other computer is up-to-date.
Problem is with launching the Java applet ,all the rest is working.- I'm log in to SSL VPN Tunnel- The new window is opening I accept applet to run .It try but nothing happens the window is blank with no connect / disconnect buttons.
All I have is Java error:Plug-In Java 1.6.0_24JRE version 1.6.0_24-b07-334-10M3326 Java HotSpot(TM) 64-Bit Server VMjava.lang.SecurityException: [code]....
View 1 Replies
View Related
Feb 2, 2011
I have set up 2 DHCP pools and 2 VLANs (1 *the native* for data / 1 VLAN for voice). When I use the command "switchport voice vlan 20" the port disapear from the show vlan brief list. When I use the "switchport access vlan 20" it shows up in the show vlan brief in the correct VLAN and gives the phone an IP. I assume that using the access instead of the voice is wrong and the phones would not configure correctly. But when I use the access the phone goes to the next step and tells me the TFTP files are not found. Why does the port disapear from the VLAN list?
View 8 Replies
View Related
Feb 28, 2011
Is it possible to assign public IP address as Router's local IP address (RVL200, RVS4000)?
View 1 Replies
View Related
