Cisco Routers :: RVL200 And Windows 7 Do Not Work
Dec 8, 2011
Tried everything .... beginning with updating to actual firmware, installing C++Redistr and all other tips I found.eg there are no ssldrv.* in the assumed directories .... there is a certificate which is outdated in the 1920th (lol) ... it´s true.Phone support is not avail .... because we use it a couple of years .... with xp and vista there is no prob?Perhaps there is a usefull handout/whitepaper available? I´ve followed this link, but that did not work:[URL]
View 1 Replies
ADVERTISEMENT
Jan 29, 2012
How to get the Virtual Passage adapter to install and the VPN to work, I keep getting the install error for the Virtual Passage Adapter. I have the last and latest firmware installed, 1.1.12.1 and am running Win 7 Ultimate 64-bit. I previously had it working from within the same building where I am now in but somewhere in the IE upgrades or otherwise the adapter no longer installs. I have tried starting IE9 64-bit with administrator's rights, made the noted ActiveX and scripting security changes as noted in the manual for a Windows OS. I also have C++ 64-bit redistributable 2005 installed (also 2008 and 2010 for that matter if that would cause any conflict). I am running Norton 2012 Internet Security and SUPERantispyware which I don't think have any bearing on the situation but still thought I would note it. I do not have port 443 forwarded for any reason in the RVL200 setup which I learned RVL200 uses for the SSL VPN. I have tried removing the SSL drivers that were put in the Windows folder after the failed attempts of the Virtual Passage instal but with no luck in reinstalling.
View 2 Replies
View Related
Jan 6, 2013
rvl200 is not working with any new os/java. cisco is not fixing and telling us to move on.picked up a vpn server and placed it on the dmz for rvl200 (on 192.168.1.105). for the life of me, can not get traffic from the outside to go to this server. tried port forwarding on rvl200 (for 443) which is what the vpn server recommends. rvl200 is not allowing this. can not go through the ssl vpn on rvl200 since it does not work. looked at rv042 topics and it shows similar problems.
View 1 Replies
View Related
Apr 4, 2011
I got problem with RVL200, he works good on my botch mac's witch OSX 10.5,10.6 and Firefox 3.6 but stop working after last java update. The machine witch 10.5 is working because I don't update Java but the other computer is up-to-date.
Problem is with lunching the Java applet ,all the rest is working.- I'm login to SSL VPN Tunnel- The new window is opening I accept applet to run.He try but nothing happends the window is bank with no connect / disconnect buttons. [code] I have all the rights / permission to vpclient catalogue and files in there.I try this on root to the same error
View 12 Replies
View Related
Oct 9, 2011
RVL200 firmware 1.1.12.1 iPad2 cannot access any device on the remote LAN despite the closed padlock icon.Is there another App needed ? Or how to debug the SSL VPN ?
View 2 Replies
View Related
Sep 19, 2011
i have an rvl200 Router and the ssl-vpn-tunnel is working fine under windows and linux.Now i bought a Nexus S with Android 2.3.3 and would like to create an vpn- connection to my router too.But the Applet, like on linux is not starting.
View 2 Replies
View Related
Nov 29, 2011
which current SB routers support these features known from RVL200 and RV0XX v. 1.X?:
Block MAC address on the list with wrong IP address
Block MAC address not on the list
View 1 Replies
View Related
Jan 2, 2013
Is it at all possible to channel all/some data traffic through an established ipsec tunneled connection using the RVL200? I have successfully established an ipsec connection through RVL200 and RV042 routers and are able to connect to servers/computers behind it.Now I want to channel all or some traffic through the ipsec-tunnel for computers that reside on 192.168.1.0 subnet of RVL200 network.
Main office - RV042 router - 10.200.62.1
Remote office - RVL200 router - 192.168.1.1
I am trying to use the Advanced Routing option to add static routes but I am not 100% sure if I am configuring the routes correctly.To give an example of routing DNS requests for HOTMAIL.COM [65.55.72.183]: [code]For some reason this does not appear to work. I have also tried using the interface setting of WAN and tested - this also does not work.
View 10 Replies
View Related
Nov 29, 2012
I have several laptops that work fine with my wireless router. I have a new laptop with Windows7 and it will not stay connected for more than a couple of minutes at a time. Are there any issues with this router and Windows7?
View 1 Replies
View Related
Feb 2, 2011
I maintain a small network - 11 clients and 1 server. The server is a WS2008R2 domain controller - the clients login to the server as active directory user. Now there is a need to connect a remote location to the network. The primary site has a DSL connection with a static IP and a cheap router. The remote site has DSL with dynamic IP and the same router. I bought two RVL200 routers thinking this would do the job. The plan is to replace the existing routers at each location with the RVL200's, configure a VPN tunnel between the routers, and thereby "virtually" connect the remote location to the network.
1) Is this plan as described doable?
2) How do the remote client machines "see" the network. Do they actually think they are on the primary site's LAN?
2a) Where will the remote client get its IP address? I'm assuming from its own RVL200 ... but then it will obviously not be on the same subnet as the primary site - so how will it access the server, etc.?
3) Can ALL traffic - not just "intranet" traffic - be routed over the VPN tunnel? (Will that happen automatically?)
3a) The reason for 3 is ... they do per-user internet access control through software running on the server, so they want to force all internet access from these remote clients to go through the same path as the local clients at the primary site.
View 1 Replies
View Related
May 22, 2012
I'm trying to set up a permanent VPN connection for an Expat. We've got an RV042 set up on site to act as the server, and an RVL200 as a client. This RVL200 will be behind a home router, so it needs to initiate the connection every time; the site side router won't be able to see it behind the Expat's home router.I've got a PPTP server set up on the RV042, and I'm trying to get the RVL200 to connect to it as a client. Is there any way to do so, or will we need to go with another option? Because on the RV042, I see no way to set up an SSL server of any kind; only a direct SSL Tunnel, which won't work as again, the RV042 will not be able to see the RVL200.
View 1 Replies
View Related
Dec 26, 2010
Linksys Small Business VPN endpoint routers?
I have been trying for two days to setup a Linksys RVS4000 to a RVL200 IPSec tunnel and I can't get them to connect.
The internet is via optimum online home internet accounts. From what Cisco said, the ports necessary are 500, 4500, 443 and 60443.
View 17 Replies
View Related
Sep 18, 2011
I have two new RVL200's with 1.1.12.1 firmware on it. Every time we use Logmein to remote a pc on the LAN it locks the router up and has to be power cycled. I have reinstalled the latest firmware 1.1.12.1 and this has not worked.
View 1 Replies
View Related
May 15, 2007
We have a main and branch office, each with an RVL200 . I configured both with static IP's as provided by my ISP, yet when I try to do a test connection on the IPSec screen I just get that it's "waiting for a connection" in the cell third from the left. Both RVL200 's are connected directly to the modem/bridge supplied by both ISP's.
View 5 Replies
View Related
Jan 17, 2011
Bought a Cisco RVL200 (latest firmware included - I checked), and I've set it up to serve as the gateway/firewall for my home network. I also intend to use the VPN functionality when travelling as well as serving up content from a web server behind it. All of this seems to work the way it is intended (after quite a bit of fiddling).
The problem however is that if it comes under any sort of load it simply stops responding - physically it looks alright with the expected leds being lit, just as it would when functioning normally. It does not display the management interface, nor does it even respond to ping (which it does when it works). If I start up a bittorrent client on any of the machines on the internal network and add a torrent to something popular like Ubuntu Linux it'll usually start downloading and then after 5-15 minutes the RVL200 will have stopped responding. Tried adding QOS settings to limit the computer running the client or downprioritize this type of traffic, but that does not seem to have any effect.
View 1 Replies
View Related
Jul 25, 2011
if the firewall rules in the RVL200 work for inter LAN routing as well as LAN<->WAN? I need 2 separate networks in a house, 1 for business 1 for family, and I want to only allow my IP on network 1 (family net,10.0.0.0/24) access to network 2 (business net 10.0.1.0/24). I want this as if I change rooms were a access point for business is not available I can use the home net and specific IP to access certain business net IPs. I saw you can turn inter vlan routing on or off, but it wasn't clear on firewall rules.know of a similar router in cost but with gige instead of 100Mb ports?
View 1 Replies
View Related
Apr 4, 2011
I got problem with RVL200, it works good on my botch mac's witch OSX 10.5,10.6 and Firefox 3.6 but stops working after last java update. The machine switch 10.5 is working because I don't update Java but the other computer is up-to-date.
Problem is with launching the Java applet ,all the rest is working.- I'm log in to SSL VPN Tunnel- The new window is opening I accept applet to run .It try but nothing happens the window is blank with no connect / disconnect buttons.
All I have is Java error:Plug-In Java 1.6.0_24JRE version 1.6.0_24-b07-334-10M3326 Java HotSpot(TM) 64-Bit Server VMjava.lang.SecurityException: [code]....
View 1 Replies
View Related
Nov 28, 2011
I have a windows xp pc that is running as a server that is networked with a windows 7 pc. Both are connected through a switch. Here is the diagram.
Both Pc's--->Switch--->Wired Router--->Wireless router/modem--->Phone line box.
I am running embarq high speed internet. I also have a network printer that follows the route as the pc's but has its own port.I used to have the 2 pc's networked to share a folder on the xp machine. Came in one day, and now the shared folder cannot be located by the Windows 7 machine. I have tried to run setup wizard for network over and over and cannot get any results. I can map the drive on the xp machine but it doesnt show up on the 7 machine, or I am just not able to locate it under my computers.
View 19 Replies
View Related
Jan 13, 2012
My computer has today 3x2 TB WD Green disks and thay are really slowing my system down so now I need to move them to somekind of NAS.I was first lookin at the "Synology Disk Station DS411j" but then I found that I got some old hardware laying around (AMD 3200+ CPU, 1 GB ram,XFX GeForce 7600GT, Seasonic SS-300FT in a Thermaltake Xaser II chassi). So now I got some questions :
1. I was looking into running FreeNas on my NAS but if the NAS is crashing then it will be alot of work to get the data back? Is it right that its not possible to just mount a drive from the FreeNas in to my Windows7 computer and read the data?
2. If I install Windows 2008(not r2 that demands 64bits CPU) and then uses dynamic volums to get one big volume, what will happen if this Windows2008 craches? will it be able to place one of the disks in my windows7 computer and reda the data?
3. What happens if one disk i a dynamicvolume craches? will all data be lost?
4. Is there any sleepmode in Windows2008? If would be nice if the computer shutsdown at night and startsup when it is about to be used.
5. Will a finished product like the "Synology Disk Station DS411j" demand less power? Will I earn anything to buy the DS411j instead of my old hardware if we look on the economics?
View 2 Replies
View Related
Oct 24, 2011
As we all know, MS has changed the default workgroup names in different versions of windows. Additionally, you can rename your workgroup anything you like. I have XP, Vista, and Win7 computers, a television, BluRay player, a Wii, two printers, and a NAS with two USB drives attached. All of these -except the Win7- are wired to one of two switches. I have wireless: iPad, the Win7 notebook, Nintendo DSs. I have friend, and non-friend machines (computers, tablets, and phones) that come and go that are wired or wireless. The 3 windows computers all have the same workgroup name. All of my other units do not use workgroup names. I have a router, and two unmanaged switches, and have, on occasion, a second router. The main router, which has wired, and dual band wireless (each with two named wireless networks) nets, sees everything, by name and/or MAC address. Win7 is blind, deaf, and dumb.: it shows its own workgroup name, but no other workgroup name(s) , and, consequently, no unit on these other workgroups. It will show some wired units not in a workgroups - the television, and the printers (not the Wii or NAS). It will not show the wired XP computer! No wireless units either in workgroups or not in workgroups appear. Additionally, Win7 only shows units on its wireless network, not on the other three. The wired units it does show are not on any of the wireless networks, though it lists them on its wireless network.I have left the Homegroup, and terminated the Homegroup services. I have allowed discovery, and unlimited sharing of everything on every computer on the router, and yet the Win7 unit does not share or see well at all.Why?
View 2 Replies
View Related
Dec 5, 2012
I have this USB Wifi adapter: NETGEAR WNA3100 [URL] I just bought it and thought it would work, but apparently it is def a Windows 7 problem because I have tried it with these others USB adapters only. My main objective is to create a hotspot for the house wirefree and no triping etc etc
Airlink+ 802.11g 2.0 (old) Works with XP but not on W7 (blinks)
WifiMAX Dongle 802.11g 2.0 (also old) (Sometimes blinks at intervals)
TrendNET TEW-644UB (bought last year) (Light stays on/no longer blinks)
Netgear WNA3100 (arrived just a few hours ago) (I made it blink now with its software)
I have tried(netgear):
-rebooting
-installing/uninstalling drivers
-uninstalling itunes
-Using a W8 procedure for it
-tried using different software
-Some other stuff
I have not tried a HKEY codes for it My biggest problem is that the "Disabled" status is stuck and I cannot re-enable it. If there is a way to override this I would be happy to hear it. Using: Windows7 Ultimate Gigabyte Motherboard/AMD chipset For the only one that is enabled(Airlink) it has some funny stuff on the status like 412 Gbps and doesn't have ipv4/6 connectivity [URL]
View 7 Replies
View Related
Aug 21, 2011
I have two disk tops I want to network to the internet. Does any one know of a "Wired Router" that will work with Windows Seven and XP?
View 2 Replies
View Related
Aug 2, 2012
I trying to find out if I use my wrt160n v3 within a win7 environment?
View 1 Replies
View Related
Apr 1, 2012
i have netgearma101 will not work on window 7 it will work on 98 2000 xp
View 2 Replies
View Related
Jun 26, 2011
I have an old compaq running windows 98. I just bought a netgear n300 wireless usb adapter, knowing there might be compatibility issues.
View 2 Replies
View Related
Jun 11, 2011
how do i get a cricket modem to work on windows 7?
View 1 Replies
View Related
Mar 13, 2011
[URL]
I have the version 3xxx adapter yet I can't get it to work at all.
I've tried letting windows see it, manually pick drivers from the file I download, that doesn't work. I've tried using the installer and that only makes things worse. IT SAYS IT SUPPORTS 64bit 7!
I have a WUSB11 v2.8 laying around but that is even worse looking 64bit driver wise.
View 1 Replies
View Related
Apr 6, 2011
I have win 2008 server as DC, i have installed acs 4.2 on menber server (win 2003) , but it doesn't work, how to let this one work.
View 6 Replies
View Related
Nov 25, 2012
My new Windows 8 computer is not wi-fi capable, I bought the adapter but it only works with Windows 7, they have a link to upgrade to Windows 8 but I don't know where to go from there.
[URL]
View 1 Replies
View Related
Mar 2, 2011
Internal network (LAN) works OK rock solid; only internet drops intermittently windows xp sp3 with latest updates wired connection
View 2 Replies
View Related
Mar 25, 2011
I installed a Micro Edition of Windows 7. Everything is going properly with it except the wireless internet connection (its driver is installed and working properly as shown in Device Manager), by click Connect and typing the PW, it tries for few minutes then fail in connecting putting a yellow small circle on the wireless icon in Task bar
View 1 Replies
View Related
May 3, 2011
I have windows 7 Ultimate , I have a wired ome network and haev a laptop and WD Live TV Hub on them but when I try and click on teh items under network in explorer it pops up with a enter network password, under which it wants a user name and password.i have added all the usernames and passwords I haev for the pc and the laptop but nothing gets past it.
View 19 Replies
View Related
Nov 30, 2012
I installed w8 2 hours ago. I just hate they messed with evething but that is not the problem. Aftyer that I haven't beeb able to connect to Virgin broadband. I have to use a donle because my pc has not a wireless adapter. After installation it looks the dongle don't work because not lights come out of it (always b4 there was a light). I talk to someone on the phone but couldn't resolve the problem. They are just going to send a new one. At the moment I'm using 3 mobile wich I cancelled in favour of Virgin wich is not really so good. The is up to 60 Mb but it never goes over 10 MB.
View 1 Replies
View Related