Belkin Routers :: F9L1002 Wi-Fi Adapter Not Working Windows 7 Home
Jun 1, 2013
after going through the several troubleshooting steps (un/reinstall driver; download a fresh setup; comb thru all network and internet settings; multiple cold re-boots; system restore etc.) While the adapter shows up in device mgr, only getting error msg that there is a problem with the driver.Did try several ways to find out where the hang-up was, and only get the driver error.Using Windows7 Home Premium-all updated.Was using my ethernet to my LAN previously.
View 1 Replies
ADVERTISEMENT
Nov 25, 2012
My new Windows 8 computer is not wi-fi capable, I bought the adapter but it only works with Windows 7, they have a link to upgrade to Windows 8 but I don't know where to go from there.
[URL]
View 1 Replies
View Related
Nov 13, 2012
No light on adaptor, not recogised in device manager. Worked before PSU failed.
View 1 Replies
View Related
Nov 18, 2012
I got the N600 DB Wireless Dual-Band USB Adapter in October 2012. How do I install it on Windows 8?
View 1 Replies
View Related
Feb 12, 2011
I have a Belkin F5D7050 USB Wireless G network card and it won't connect to windows xp. It tried using on Linux (ubuntu 10.04 live cd) and it works perfectly. But when I boot into windows, it doesn't. I have installed all the drivers and software I could find for it. But the programs for it don't open at all and for some reason i cant even configure it using windows "Connect to". (You know how usually you get the little wireless icon at the bottom of the screen and stuff)
View 7 Replies
View Related
Sep 14, 2012
while my younger brother borrowed my USB adapter to fix somerhing on his computer (he normally doesn't have net), I was using a flash drive. I had left the drive in, and my (very heavy) DVD drive was dropped on it, breaking both the front USB 2.0 ports and the flash drive. So I had to put the adapter in the back ports. The first few hours were fine, then net cut out. I repaired the connection, only to have to keep repairing every 30 seconds to 10 minutes. Then it stopped working altogether. I've attempted re-installing drivers, but when I do, my computer tells me that the driver I'm installing from my hard drive "Has no information on my hardware", but it's the correct driver and version for my hardware.
View 1 Replies
View Related
Dec 27, 2011
I cannot find any drivers for Belkin wireless adapter F7D1101 v1 for Windows 7
View 1 Replies
View Related
Mar 2, 2011
I'am having problems when connecting to the internet. I'am running Win7 64-bit and i have Belkin USB wireless adapter( Belkin surf N150) When i first bought the adapter it didnt connect to internet, so i though it is not working and i got it replaced. I got the same problem with the second one as well, and then i have changed the wireless mode on the device manager from: IEEE 802.11b/g/n to: IEEE 802.11b and eventually i have connected to internet without any errors, but in this mode the internet is unbelievably slow which is very slow when compared to another wireless mode where i have changed it from. So my question is why i can't connect to internet IEEE 802.11b/g/n in this mode? The weird thing is that some times it connects to internet with no error and dissconnects again in a short while. Also when the windows tries to repair it, i get this report:
Windows Network Diagnostics Publisher details
Issues found
Problem with wireless adapter or access pointProblem with wireless adapter or access point Not fixed
Refer to Windows Help and Support for more information about wireless connectivity problems Failed
Reset the wireless adapter Completed
Investigate router or access point issues Completed
[code]....
View 17 Replies
View Related
Jun 7, 2013
Upstairs I have a Century Link modem/wireless router. My wife and I use our laptops, smart phones, and XBox 360 on the wireless network. Downstairs I have an older Dell PC that I use for my business. I have an Ethernet run from upstairs to downstairs. The Ethernet jack upstairs is near a cable outlet because we used to have cable internet. Now we have DSL and the phone jack is on the other side of the room. Here's my question... I have a Belkin N600 wireless router, is there any way I can plug it into the Ethernet port on the other side of the room, and use it like a wireless adapter? I have tried a few time to set it up as an "access point" but it doesn't seem to work. As soon as I do, I can no longer access the Belkin router to make any changes and I need to do a manual reset. can I plug my downstairs PC into the Belkin N600, and have wi-fi internet access from the wireless modem/router upstairs?
View 2 Replies
View Related
Nov 27, 2012
Does my Wireless G Plus MIMO USB adapter is compatible with N600 DB Wireless Dual-Band N+ Modem Router. My Pre-N router croaked and I need to replace it.
View 3 Replies
View Related
Oct 25, 2012
I need to find a Dual Band Wifi USB adapter that use the Ralink 3572 chipset. The driver I have in my product will only support Ralink 3570 and 3572.
View 1 Replies
View Related
Jun 27, 2012
My laptop won't connect to the internet at all and status shows limited access to router. It was fine a few days ago until a Windows update. I did a system restore on it back to before the windows update and the internet was working just fine but then there was an automatic windows update again and the connection is gone again. When I try to troubleshoot it says the network adapter is not working properly. I'm currently using the main computer in the house. I can't access any network at all on my laptop and I'm nearly in tears. This has happened before about 7 months ago after a windows update. At that time I did a system restore and reinstalled the updates and it worked just fine. This time nothing. I have tried to check for updated drivers for the network adapters but windows says I'm running the recent ones.
View 8 Replies
View Related
May 30, 2012
The wireless adapter keeps saying unidentified network, I can connect from other computers and they are all working fine.
Edit: Forgot to mention its a ASUS wireless n-15 adapter, also the system is a Windows 7 64 bit. Also, has a ip address 169.x.x.x which i know means no internet connection.
View 2 Replies
View Related
Oct 20, 2012
I have a belkin surf n300 usb wireless N micro adapter. No problems installing this adapter on a HP Desktop running windows 7. I have tried to install on a gateway laptop also running windows y 64 bit. In device manager it show that the product is working. It will not connect to any network. The adapter is an F7D2102 az ver. 2011az
View 2 Replies
View Related
Mar 1, 2013
my netgear wireless router cannot see my n300 usb adapter. it shows as working in my device manager, but the netgear router says wireless not connected. when installing the adapter it said that windows has an icon to the left of the taskbar that i can click on and ask to join a network, which it didnt. it just showed network and an option to open network and sharing center, which i did. there were no wireless networks that showed available for me to log into with the adapter
View 4 Replies
View Related
Sep 11, 2012
I have problems with wifi. When I install windows 8 or Ubuntu wifi works fine, but with windows 7 even adapter not working.
"The drivers for this device are not installed. (Code 28)There is no driver selected for the device information set or element.To find a driver for this device, click Update Driver."
Windows 7 can't find update automatically and wifi driver from dell support site closes installation without finishing it.I would stay with windows 8, but there is another problem. Radeon drivers not working same as wifi on windows 7.
View 10 Replies
View Related
Mar 27, 2011
My WinXP Home PC won't connect properly (limited connectivity/no internet) via ethernet cable to my router (Belkin N150). Ipconfig /all shows the IP address as 169.254.117.71 but this is determined by an entry in the registry at HLMSYSTEMCurre....'DhcpIPAddress' - REG_SZ - 169.254.117.71. Also listed at 'IPAutoconfigurationAddress'. My laptop connects fine plugged into the same port getting it's IP automatically (192.168.2.2) and getting internet fine. I've tried adding a DWORD entry 'IPAutoconfigurationEnabled' = 0, also tried deleting the 2 values.Tried setting the IP manually to 192.168.2.6 - limited connectivity goes away but I get no internet connection from the router nor file sharing.
View 6 Replies
View Related
Dec 11, 2012
Could not find on Belkin website, hyperlink came up with "oops' result. Basic instructions to hook this up to my TV.
View 1 Replies
View Related
May 20, 2013
I have a Belkin NF5D8236-4 v3 as my main router. However, the signal range isn't the best throughout my home. After a little research and a tight budget, my thought is to purchase a Belkin N150 F9K1001 to serve as the primary router and then use the N F5D8236-4 v3 as an access point elsewhere in the house.I understand that the N150 cannot serve as an access point (hence the idea to use that as the primary), but that the N F5D8236-4 v3 can. Am I correct? Will my plan work? I can't spend much and a booster would cost more than the N150.
View 1 Replies
View Related
Jan 2, 2013
i have a Belkin N150 F6S4050 v2. I recently just upgraded to Win 8 Pro and was wondering when there will be support for this product.
View 1 Replies
View Related
Dec 14, 2012
I can't find the correct driver for Belkin F9L1101 Version 1 USB Wireless adapter. When I went here [URL] and installed the software my Windows 7 Pro w/64 bit does not recognize the adapter. When I go to Device Manager it does see the Belkin under other devices. When I choose the folder the drivers are located /program files (x86) it says it can't find the driver in that location.
View 6 Replies
View Related
Nov 2, 2012
Wireless Adapter D600 USB needs to connect to the internet to finish installing... Problem is, I bought it because I can't get my ethernet port to work on my desktop. It worked find in Windows 7, but Windows 8 needs more information.
View 1 Replies
View Related
Nov 13, 2012
F9L1101 N600 DB Wireless Dual-Band USB Adapter : recognizing and connecting to wireless network but unable to use internet. Changed static IP adress, etc but no luck. Followed instructions on support email response:
Windows XP:
Start->Control Panel->Network Connections(classic view)->Right click on Local Area connection(wired)/Wireless network connection(wireless)->Properties->Select Internet Protocol(TCP/IP)->Properties->Under General tab, choose "Use the following IP address" and type the IP address, Subnet mask and Default Gateway, DNS and press OK.
Type in the ip address 192.168.2.20
Enter the subnet mask as 255.255.255.0
Enter the default gate way as 192.168.2.1
Type in the primary DNS as 4.2.2.2
Type the alternate DNS as 8.8.8.8
Am currently unstalling and reinstalling. The network is WEP with a long alpha numeric key, which was accepted and network detected and connected. No internet. No internet. No internet.
View 3 Replies
View Related
Mar 19, 2011
My roommate is running dual boot Windows XP PRO (SP3) and Ubuntu 10.10. I am running Windows XP PRO(SP3). Is there any software, that can run on both OS and can create a home network that will work between XP and Ubuntu. He has Samba installed but I have read that that works on Linux not Windows so he can see me but I can't see him.
View 11 Replies
View Related
Mar 27, 2013
does a belkin modem router type 437B96 N+ work with a iMac? and/or do I need special software/firmware upload? from where?
View 1 Replies
View Related
Nov 1, 2012
A N600 Router Model F9J1102v1 router first installed in July 2012 with WPA-PSK, MAC Address Filtering and "Self Healing" enabled would not allow a new PC to connect via an RJ45 port. Belkin support ask for the unit to be reset to factory settings which is done and the Security system re-enabled again. Valid MAC Addresses start to be added and midway a PC is discovered in the Network without its MAC address added. Closer scrutiny reveals that another unknown device has also found a way into the router and that the 'Block' option on the MAC list is also failing to work. Anyone think of what one should do with this security shambles other than turn the thing off quick?
View 7 Replies
View Related
Oct 17, 2012
Network hub, model f5l009 not registering as a connected network USB Hub. Therefore, unable to update firmware. Devices connected to HUB are of course also not showing up. Reinstalled drivers. PC Windows 7 home pro on Comcast and a Cisco router. Firewalls are set to "allow". Only change in system is from internet providers to "Comcast". What might be causing the problem? Tried connecting directly to the Comcast router and that didn't work. Tried a hard reset on the HUB and that didn't work. If this device has failed is there a way to replace it?
View 1 Replies
View Related
Jan 17, 2013
Can I put more than one N300 Dual-Band Wi-Fi Range Extender on my home network?
View 4 Replies
View Related
Nov 21, 2012
This device used to work fine with my laptop but it has suddenly stopped working. I have tried turning it off and on again and unplugging it and trying it in different ports but to no avail. Do I need a new device driver? If so, where can I get one that is trustworthy and free,
View 2 Replies
View Related
Feb 25, 2013
I'm using Windows 8 and getting error 0x80040742
View 1 Replies
View Related
Oct 27, 2012
Tried to install a n600 DB on a windows 8 computer. Got the message "Not compatible. When will it be?
View 1 Replies
View Related
Dec 28, 2012
My OS is Windows 7 and I'm trying to setup my wireless g gaming adapter (F5D7330 v.2) and the install software continuously stops working once it says to plug in the adapter into the AC wall outlet.
View 2 Replies
View Related
Jan 16, 2013
I just bought this router for my new windows 8 desk top computer. I will be connecting it to the computer via ethernet. The box does not say that this is windows 8 compatible. Will this work with my new computer?
View 2 Replies
View Related
