My OS is Windows 7 and I'm trying to setup my wireless g gaming adapter (F5D7330 v.2) and the install software continuously stops working once it says to plug in the adapter into the AC wall outlet.
View 2 RepliesMy F5D8231-4 (N1 Wireless Router) keeps shutting down its wireless broadcast. If I reset back to factory settings it comes back on but then I have to setup again.
View 1 Replies View RelatedI run a AirPort Extreme router. I have my F9K1106 range extender set up and working. works awesome. I get home from work the next day and the range extender seems to fall asleep , it won't pass any traffic. I power cycle it and its back up and running. this happens everyday no fail for a week now.
View 1 Replies View RelatedIs there firmware available to support the 4-port Cable/ DSL Gateway Router model # F5D5231-4 Ver: 1103. The router is several years old and the installation guide suggests checking the Belkin web site for a Mac installation wizard. I don't see any ref. to a Mac down load there.
View 1 Replies View RelatedThe instructions say to power off the modem but the modem is also for the phone and has a battery backup. How do i proceed? model N300 wireless router
View 1 Replies View RelatedI cannot install the printer drivers manually (HP Deskjet 970 CSE) onto my Belkin N750 DB router. The USB Print and Storage Manager does not appear on my computer
View 1 Replies View RelatedWhen my RV042 is accessed for long transmissions (svn check out, usually after 20 minutes ) the client receives a message "Gateway not responding, do you want to wait".
When this happens I see the following in the RV042 system log (the first 3 lines of the log below are normal):
Apr 2 17:36:53 2012Connection AcceptedTCP 192.168.2.2:8888->192.168.1.5:50046 on ppp1Apr 2 17:36:54 2012Connection AcceptedTCP 192.168.2.2:8888->192.168.1.5:50046 on ppp1Apr 2 17:36:54 2012Connection
[Code]....
We bought an RV042 at the end of June. It is used as a gateway and VPN router. DHCP server is disabled and all IPs are configured manually.Every once in a while (Tuesday night, then Friday night - yesterday, it has hapened once or twice before that) the router appears to restart (see log below) then comes back up with system time of Jan 01 2010. At this point the router will no longer load its configuration page (https://10.29.238.197:16443/) and VPN connection to our customer in Africa drops. However, devices behind the router can be reached and can access the internet. The only way to fix this is to power cycle the router at which point everything starts working flawlessly again.The PID VID is RV042 V03 running firmware v4.0.3.03-tm (May 12 2011 21:27:37). Our RV042 is a newer one with Cisco SMB Router branding not the older Linksys branding.
From the log when the router reboots:
Aug 12 22:38:42 2011VPN Log(g2gips0) #141: retransmitting in response to duplicate packet; already STATE_QUICK_I2Jan 1 01:00:05 2010System Logheart : System is upJan 1 01:00:13 2010System LogWAN connection is up : 10.29.238.197/255.255.255.192 gw 10.29.238.225 on eth1Jan 1 01:00:15 2010VPN Log(g2gips0) #1: [Tunnel Negotiation Info] >>> Initiator Send Main Mode 1st packet
I looked at the log more and all the usual messages assosciated with VPN being established are there - the last thing in the log before the router coming back up again is:
Jan 1 01:03:49 2010VPN Log(g2gips0) #4: [Tunnel Negotiation Info] Quick Mode Phase 2 SA Established, IPSec Tunnel ConnectedJan 1 01:03:49 2010VPN Log(g2gips0) #4: [Tunnel Negotiation Info] Quick Mode Phase 2 SA Established, IPSec Tunnel ConnectedJan 1 01:03:49 2010VPN Log(g2gips0) #4: sent QI2, IPsec SA established {ESP=>0x575a01c0 <0x6534ae4e
So it even claims the tunnel should be up but I can never reach anything on the far side.
I am using a RV110W with the latest firmware 1.0.1.6 I have some port forwarding configured, which normally work. But sometimes, all port forwarding stop working. Everything else continues working normally, just all port forwarding don't work any more. I tried disabling the port forwarding and enabling them again, this doesn't work. Also disabling the firewall completely does not work. You have to reboot the router, then everything works fine again. When I make a portscan from outside with a "fresh" started router, the forwarded ports are open. When the error occurs and I make a portscan from outside, all ports that should be open (and have been open before) are closed.
View 8 Replies View RelatedI'm running a Windows Server 2008 R2 connected via cable to my RV220. The server is hosting several websites running in separate virtual machines. These websites are accessible through a reverse proxy set up on the 2008 R2. In addition the 2008 R2 provides access to storage over Windows file sharing (client backup, file sharing ...). Most of the clients are connected via wireless.My problem is that after some time (~24h) I lose the connection to the services provided by the 2008 R2 server as a result of (host) name resolution has stopped working. This only happens for wireless clients. Wired clients are not affected.To give more details: Network clients connected via wireless can't see clients connected via Ethernet and the network shares are not accessible anymore (even by putting in manually "\hostnameshare", but "\[IP address]share" still works). Being connected via Ethernet the communication between client and server works flawlessly - the server appears immediately on the network device list. The other way around is also not possible: the server can’t see clients connected via wireless. The reverse proxy is still accessible through wireless connection by putting in the IP address, e.g. "http://192.168.1.123/homepage" but "http://hostname/homepage" won't work.A restart of the router will fix things but only for the next couple of hours.
View 4 Replies View RelatedI have a RV042 router on a single WAN and an internal LAN. I have configured port forwarding as follows: HTTP[TCP/80~80]->10.0.0.6HTTPS[TCP/443~443]->10.0.0.6IMAP[TCP/143~143]->10.0.0.5IMAP SSL[TCP/993~993]->10.0.0.5SMTP SSL[TCP/587~587]->10.0.0.5
Everything works just fine when I have the firewall DISABLED. However, when I enable it the behaviour is erratic. 1 out of 10 attempts to connect to ANY port forwarded works. Almost all attempts time out. Notice that this happens even if using only the default firewall rules (which should be bypassed by the port forwarding as I read in other posts).
My second try was to create firewall rules manually, overriding the default ones. I tried adding rules from source WAN1 (where my connection is) to ANY and to SINGLE IP's on every port. Nothing seems to work.
I don't know what I'm doing wrong, this is really bugging me. I had to turn the firewall off so we can access our servers from outside the office. This shouldn't have to be done.
Just found out that my firewall is getting LOTS and LOTS of Blocked - SYN Flood entries. I think this is why we are having trouble with the firewall. Could this be the problem? I have no idea where all these SYN packets are coming from since they appear with spoofed IPs or come from different bots all over.
This is the RVS 4000
Firmware version 1.3.3.5
STAR 9202 Chipset
64 MB DRAM
8MB Flash
DOS, Block WAN Rq, Remote mgmt all OFF
IPSec Tunnel none used
[code].....
Every day or so the Router becomes unresponsive to the HTTP mgmt interface, as well as it no longer offers DHCP services.then this happens the only remedy is to power reboot.
Everything comes back online just fine, however, the LOGS are initilaized so no data to figure out what`s going on.My next step is to setuo a syslog server and have the logs copied out.( No, I have no Torrents running at all, but I do have several devices like AppleTV, PS3s etc that run streaming Video plus I have the SPA3102 )
does a belkin modem router type 437B96 N+ work with a iMac? and/or do I need special software/firmware upload? from where?
View 1 Replies View RelatedA N600 Router Model F9J1102v1 router first installed in July 2012 with WPA-PSK, MAC Address Filtering and "Self Healing" enabled would not allow a new PC to connect via an RJ45 port. Belkin support ask for the unit to be reset to factory settings which is done and the Security system re-enabled again. Valid MAC Addresses start to be added and midway a PC is discovered in the Network without its MAC address added. Closer scrutiny reveals that another unknown device has also found a way into the router and that the 'Block' option on the MAC list is also failing to work. Anyone think of what one should do with this security shambles other than turn the thing off quick?
View 7 Replies View RelatedNo light on adaptor, not recogised in device manager. Worked before PSU failed.
View 1 Replies View RelatedNetwork hub, model f5l009 not registering as a connected network USB Hub. Therefore, unable to update firmware. Devices connected to HUB are of course also not showing up. Reinstalled drivers. PC Windows 7 home pro on Comcast and a Cisco router. Firewalls are set to "allow". Only change in system is from internet providers to "Comcast". What might be causing the problem? Tried connecting directly to the Comcast router and that didn't work. Tried a hard reset on the HUB and that didn't work. If this device has failed is there a way to replace it?
View 1 Replies View Relatedafter going through the several troubleshooting steps (un/reinstall driver; download a fresh setup; comb thru all network and internet settings; multiple cold re-boots; system restore etc.) While the adapter shows up in device mgr, only getting error msg that there is a problem with the driver.Did try several ways to find out where the hang-up was, and only get the driver error.Using Windows7 Home Premium-all updated.Was using my ethernet to my LAN previously.
View 1 Replies View Relatedthe router is functional, however the green light has never blinked like it is now.
View 1 Replies View Relatedhad a firmware update error model WNR3500
View 1 Replies View Relatedi have a 876 Router, connected to the Internet and a VPN. From inside i would like to pass all traffic destinied to 192.168.0.0 255.255.255.0 to the VirtualPPP IF and al the other to the Internet (vlan2) I have created this rule, but after applying ist works only for about 30 to 60 seconds. after that only the Internet reachable. Everytime i do a clear ip nat trans * both Interfaces will work für 30 to 60 secs again...
This is the relevant part of the cfg
ip nat inside source route-map Di1 interface Virtual-PPP1 overload
ip nat inside source route-map VLAN1 interface Vlan2 overload
!
access-list 1 remark CCP_ACL Category=2
[Code].....
I have a Asus n55s. The wireless acts very funky. It sometimes disconnects and stops working. Sometimes, it will stop detecting any nearby wireless networks altogether. Then I have to enable and disable the wireless functionality until it starts seeing nearby wireless networks.
View 9 Replies View RelatedI've been having this problem with my laptop's wifi for a while now and it's been getting a little out of hand lately that I can't deal with it anymore. I asked some friends and they seem to have the same problem too but not nearly as often as I do. Every so often, my laptop's wifi just stops working so I turn it off and then turn it back on and it starts working again. My friend says it happens very rarely to him but for me just today it happened 2 times within 10 minutes
View 7 Replies View RelatedI'm having is that every few hours my TCP/IP protocol stops working. The modem lights remain normal but I can't connect to anything. The only thing that works on the internet is traceroutes at the command prompt which function normally. The solution is that I have to reboot and then everything returns to normal until a few hours later when it happens again. There are no error messages on any of my browsers. The page just goes white immediately. When I try to retrieve my email, I get a message about the TCP/IP isn't working.
View 9 Replies View RelatedI've got the same problem on my wife's Acer One 532h. Did it get resolved for you, Adrian and if so, how?
View 5 Replies View RelatedOn Windows XP, my integrated NIC stops working after hosting a server. The server starts fine, ports are forwarded, firewall is down, modem is fine, but when I receive a connection, it shows they have made a connection, but then they drop, as do I. I can't browse or ping anywhere. I have to physically disconnect, then reconnect the ethernet cable to the port, or restart the computer. Upon ipconfig, the adapter is set with the Windows default ip (169.x.x.x) and cannot be /release'd or /renew'd.
View 10 Replies View RelatedIt's fairly hard to explain what happens but basically, say I'm playing some type of online game, all of a sudden anything server sided such as HP amounts, damage amounts, etc. just disappears but the animation runs fine such as attacking being hit, etc. All of a sudden it'll jump forwards and I'll take any damage and do any damage that had been happening until the issue started. This happens constantly and it's really frustrating but on top of that my internet will slow to a crawl..Say I'm trying to send a message on Skype, it won't send for the longest time and I won't be able to recieve any or even open a new webpage until the problem fixes itself.'ve looked around a bit and thought I fixed the issue, I'm on wifi and multiple devices are connected but not always in use, and the forum I found suggested an ip conflict and said to open up command prompt release the ip with ipconfig /release and then renew it with ipconfig /renew.
View 3 Replies View RelatedOnce every couple of days the wireless service seems to disappear. I've connected to the router from a wired computer and everything looks ok from the d-link panel, however its not showing up as an available wireless network on the wireless units. Pulling the power off for 30 seconds tends to get it working again. I'm configured bg and n. I need a mix... an old B laptop, have one machine that has a G NIC, and the rest are N.
View 14 Replies View RelatedAfter buying a new WNDR370. Sporadically and seemingly without any cause my internet will stop working. Diagnostic will always report it as "DNS Server is not responding." I've also discovered that if I enter my router settings and even just switch the DNS settings from Auto to manual or vice versa the problem corrects itself instantly-then next time it happens I just need to do it again.
I've already tried resetting my entire network and rebuilding the recommended way. Modem, Router, then computers-connecting each only after the prior has finished initializing. Hasn't worked though.
Currently I have my main rig connected directly to the modem to try and find out if I experience the problem at all this way, this is a pain in the ass though, and I don't know when long enough is long enough as the issue is completely random and simply just may not happen.
I just bought belkin range extender and I can't get it connected to my network because the 192. page won't open?
View 1 Replies View RelatedMy computer crashed the other day and HDD failed. i finally got it back up and running but ive been using a usb wireless adapter. i do not have the disk anymore to install the drivers, nor will my computer install them from the internet because i dont have an internet connection on my desktop. what are my options to have them installed?
View 3 Replies View RelatedI have a cisco asa 5010 where, during the process of configuring, the outside ports become down/down. The /0 port won't even reactivate after cycling power on the unit.Port /1 is the inside interface and it is not affected by the problems.I switched the outside port to port /3 and it worked for awhile then it stopped working. I switched it to Port /2 and the same thing.Port /2 and Port /3 are on after a power recycle but shut down completely (down/down) during the reconfiguration. It seems like a hardware failure, but I'm wondering if it could be anything else.
View 4 Replies View RelatedMy computer runs bit torrent almost all the time, sometimes when I start Firefox the home page google never loads and neither do any other web pages yet bit torrent is still working as if nothing has changed. If I start a download in Firefox come back to the pc a few hours later Google doesn't load but the Firefox download still continues.What causes this is it DNS ?
View 2 Replies View RelatedI recently setup a site to site vpn between a asa 5510 and router 1921. It was working great all night and this morning. When traffic stopped rolling through for a few hours the tunnel shutdown. I checked the router using cisco configuration and tells me the tunnel is up. When I check the asa it does not show up in the active tunnels. Any know what would cuase it to drop? and if so what can I do to avoid it.
View 6 Replies View Related